From b2497c1a7d864c5723e7abfdb1dffb5a9a0f092f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= Date: Sat, 9 Dec 2017 00:54:33 +0100 Subject: serial: max310x: Document clock setup MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As a kernel newcomer, I got bitten by lack of examples on this front. I had troubles figuring out where these clocks could be defined ("/clocks" is where the generic infrastructure expects them). One should also ensure that a unique name is used. Generic names such as "osc" tend to be already used by some board-wide clock crystals. Signed-off-by: Jan Kundrát Signed-off-by: Greg Kroah-Hartman --- .../devicetree/bindings/serial/maxim,max310x.txt | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/serial/maxim,max310x.txt b/Documentation/devicetree/bindings/serial/maxim,max310x.txt index 0c58052a18bb..823f77dd7978 100644 --- a/Documentation/devicetree/bindings/serial/maxim,max310x.txt +++ b/Documentation/devicetree/bindings/serial/maxim,max310x.txt @@ -24,13 +24,27 @@ Optional properties: 1 = active low. Example: + +/ { + clocks { + spi_uart_clk: osc_max14830 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <3686400>; + }; + + }; +}; + +&spi0 { max14830: max14830@0 { compatible = "maxim,max14830"; reg = <0>; - clocks = <&clk20m>; + clocks = <&spi_uart_clk>; clock-names = "osc"; interrupt-parent = <&gpio3>; interrupts = <7 IRQ_TYPE_LEVEL_LOW>; gpio-controller; #gpio-cells = <2>; }; +}; -- cgit v1.2.3