From 4dd3a29f295799295eac819bbf540690fbe30c16 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Wed, 18 Feb 2009 19:09:23 +0900 Subject: sound: fix opensound URL in oss Introduction Signed-off-by: Yoichi Yuasa Signed-off-by: Takashi Iwai --- Documentation/sound/oss/Introduction | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/sound/oss/Introduction b/Documentation/sound/oss/Introduction index f04ba6bb7395..75d967ff9266 100644 --- a/Documentation/sound/oss/Introduction +++ b/Documentation/sound/oss/Introduction @@ -80,7 +80,7 @@ Notes: additional features. 2. The commercial OSS driver may be obtained from the site: - http://www/opensound.com. This may be used for cards that + http://www.opensound.com. This may be used for cards that are unsupported by the kernel driver, or may be used by other operating systems. -- cgit v1.2.3 From eca985d28e1a8092ba2686ec5485fd688df5cfb3 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Wed, 18 Feb 2009 19:07:18 +0100 Subject: sound: Remove documentation for OSS CS4232 driver There is no OSS cs4232 driver in the kernel any more and this documentation does not contain any info useful for ALSA driver. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai --- Documentation/sound/oss/CS4232 | 23 ----------------------- 1 file changed, 23 deletions(-) delete mode 100644 Documentation/sound/oss/CS4232 (limited to 'Documentation') diff --git a/Documentation/sound/oss/CS4232 b/Documentation/sound/oss/CS4232 deleted file mode 100644 index 7d6af7a5c1c2..000000000000 --- a/Documentation/sound/oss/CS4232 +++ /dev/null @@ -1,23 +0,0 @@ -To configure the Crystal CS423x sound chip and activate its DSP functions, -modules may be loaded in this order: - - modprobe sound - insmod ad1848 - insmod uart401 - insmod cs4232 io=* irq=* dma=* dma2=* - -This is the meaning of the parameters: - - io--I/O address of the Windows Sound System (normally 0x534) - irq--IRQ of this device - dma and dma2--DMA channels (DMA2 may be 0) - -On some cards, the board attempts to do non-PnP setup, and fails. If you -have problems, use Linux' PnP facilities. - -To get MIDI facilities add - - insmod opl3 io=* - -where "io" is the I/O address of the OPL3 synthesizer. This will be shown -in /proc/sys/pnp and is normally 0x388. -- cgit v1.2.3