From 4e59c25dcbc1f033d043f1009a7f6aaa1f2aef26 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 12 Dec 2008 00:24:18 +0000 Subject: [ARM] S3C: Rename s3c2410_pm_init to s3c_pm_init. Since we have moved a large proportion of the PM code to the common support area, remove the cpu specific name from the initialisation function. Signed-off-by: Ben Dooks --- Documentation/arm/Samsung-S3C24XX/Suspend.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/arm/Samsung-S3C24XX/Suspend.txt b/Documentation/arm/Samsung-S3C24XX/Suspend.txt index 0dab6e32c130..a30fe510572b 100644 --- a/Documentation/arm/Samsung-S3C24XX/Suspend.txt +++ b/Documentation/arm/Samsung-S3C24XX/Suspend.txt @@ -40,13 +40,13 @@ Resuming Machine Support --------------- - The machine specific functions must call the s3c2410_pm_init() function + The machine specific functions must call the s3c_pm_init() function to say that its bootloader is capable of resuming. This can be as simple as adding the following to the machine's definition: - INITMACHINE(s3c2410_pm_init) + INITMACHINE(s3c_pm_init) - A board can do its own setup before calling s3c2410_pm_init, if it + A board can do its own setup before calling s3c_pm_init, if it needs to setup anything else for power management support. There is currently no support for over-riding the default method of @@ -74,7 +74,7 @@ statuc void __init machine_init(void) enable_irq_wake(IRQ_EINT0); - s3c2410_pm_init(); + s3c_pm_init(); } -- cgit v1.2.3 From 5f0fbf9ecaf354fa4bbf266fffdea2ea3d14a0ed Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Tue, 16 Sep 2008 13:05:53 -0400 Subject: [ARM] fixmap support This is the minimum fixmap interface expected to be implemented by architectures supporting highmem. We have a second level page table already allocated and covering 0xfff00000-0xffffffff because the exception vector page is located at 0xffff0000, and various cache tricks already use some entries above 0xffff0000. Therefore the PTEs covering 0xfff00000-0xfffeffff are free to be used. However the XScale cache flushing code already uses virtual addresses between 0xfffe0000 and 0xfffeffff. So this reserves the 0xfff00000-0xfffdffff range for fixmap stuff. The Documentation/arm/memory.txt information is updated accordingly, including the information about the actual top of DMA memory mapping region which didn't match the code. Signed-off-by: Nicolas Pitre --- Documentation/arm/memory.txt | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/arm/memory.txt b/Documentation/arm/memory.txt index dc6045577a8b..43cb1004d35f 100644 --- a/Documentation/arm/memory.txt +++ b/Documentation/arm/memory.txt @@ -29,7 +29,14 @@ ffff0000 ffff0fff CPU vector page. CPU supports vector relocation (control register V bit.) -ffc00000 fffeffff DMA memory mapping region. Memory returned +fffe0000 fffeffff XScale cache flush area. This is used + in proc-xscale.S to flush the whole data + cache. Free for other usage on non-XScale. + +fff00000 fffdffff Fixmap mapping region. Addresses provided + by fix_to_virt() will be located here. + +ffc00000 ffefffff DMA memory mapping region. Memory returned by the dma_alloc_xxx functions will be dynamically mapped here. -- cgit v1.2.3 From 3a853fb933ddf9c5ea8c9f7c665dd8def26bceae Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Mon, 23 Mar 2009 18:07:47 -0700 Subject: ARM: OMAP: Add command line option for I2C bus speed, v2 This patch adds a new command line option "i2c_bus=bus_id,clkrate" into I2C bus registration helper. Purpose of the option is to override the default board specific bus speed which is supplied by the omap_register_i2c_bus. The default bus speed is typically set to speed of slowest I2C chip on the bus and overriding allow to use some experimental configurations or updated chip versions without any kernel modifications. Cc: linux-i2c@vger.kernel.org Signed-off-by: Jarkko Nikula Signed-off-by: Tony Lindgren --- Documentation/kernel-parameters.txt | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 54f21a5c262b..d775076d1563 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -830,6 +830,10 @@ and is between 256 and 4096 characters. It is defined in the file hvc_iucv= [S390] Number of z/VM IUCV hypervisor console (HVC) terminal devices. Valid values: 0..8 + i2c_bus= [HW] Override the default board specific I2C bus speed + Format: + , + i8042.debug [HW] Toggle i8042 debug mode i8042.direct [HW] Put keyboard port into non-translated mode i8042.dumbkbd [HW] Pretend that controller can only read data from -- cgit v1.2.3 From 7954763bb95fd484a76d1151b40956fe331d23b9 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Mon, 23 Mar 2009 18:07:48 -0700 Subject: ARM: OMAP: Add method to register additional I2C busses on the command line, v2 This patch extends command line option "i2c_bus=bus_id,clkrate" so that it allow to register additional I2C busses that are not registered with omap_register_i2c_bus from board initialization code. Purpose of this is to register additional board busses which are routed to external connectors only without any on board I2C devices. Cc: linux-i2c@vger.kernel.org Signed-off-by: Jarkko Nikula Signed-off-by: Tony Lindgren --- Documentation/kernel-parameters.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index d775076d1563..ef9827f7c84e 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -831,6 +831,8 @@ and is between 256 and 4096 characters. It is defined in the file terminal devices. Valid values: 0..8 i2c_bus= [HW] Override the default board specific I2C bus speed + or register an additional I2C bus that is not + registered from board initialization code. Format: , -- cgit v1.2.3