From be2a608bd08ec00e19e14b322e07f443d2711084 Mon Sep 17 00:00:00 2001 From: John Anthony Kazos Jr Date: Wed, 9 May 2007 08:50:42 +0200 Subject: documentation: convert the Documentation directory to UTF-8 Convert files within the Documentation directory to UTF-8. Adrian Bunk: small additional fixes Signed-off-by: John Anthony Kazos Jr. Signed-off-by: Adrian Bunk --- Documentation/usb/CREDITS | 2 +- Documentation/usb/usb-serial.txt | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation/usb') diff --git a/Documentation/usb/CREDITS b/Documentation/usb/CREDITS index 27a721635f92..67c59cdc9959 100644 --- a/Documentation/usb/CREDITS +++ b/Documentation/usb/CREDITS @@ -65,7 +65,7 @@ THANKS file in Inaky's driver): will sell keyboards to some of the 3 million (at least) Linux users. - - Many thanks to ing büro h doran [http://www.ibhdoran.com]! + - Many thanks to ing büro h doran [http://www.ibhdoran.com]! It was almost impossible to get a PC backplate USB connector for the motherboard here at Europe (mine, home-made, was quite lousy :). Now I know where to acquire nice USB stuff! diff --git a/Documentation/usb/usb-serial.txt b/Documentation/usb/usb-serial.txt index b18e86a22506..5b635ae84944 100644 --- a/Documentation/usb/usb-serial.txt +++ b/Documentation/usb/usb-serial.txt @@ -45,9 +45,9 @@ ConnectTech WhiteHEAT 4 port converter Connect Tech's Support Department at support@connecttech.com -HandSpring Visor, Palm USB, and Clié USB driver +HandSpring Visor, Palm USB, and Clié USB driver - This driver works with all HandSpring USB, Palm USB, and Sony Clié USB + This driver works with all HandSpring USB, Palm USB, and Sony Clié USB devices. Only when the device tries to connect to the host, will the device show @@ -69,7 +69,7 @@ HandSpring Visor, Palm USB, and Cli the port to use for the HotSync transfer. The "Generic" port can be used for other device communication, such as a PPP link. - For some Sony Clié devices, /dev/ttyUSB0 must be used to talk to the + For some Sony Clié devices, /dev/ttyUSB0 must be used to talk to the device. This is true for all OS version 3.5 devices, and most devices that have had a flash upgrade to a newer version of the OS. See the kernel system log for information on which is the correct port to use. -- cgit v1.2.3