From 5aba4f8ec72b2b880c694b5ce58e67be508f7b7a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 7 Jan 2008 15:16:37 +0100 Subject: [ALSA] hda-intel - Support multiple devices It turned out that there can be multiple HD-audio devices on a single machine (e.g. on-board audio and HDMI on graphic cards), so we need to support multiple devices with snd-hda-intel driver. Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- Documentation/sound/alsa/ALSA-Configuration.txt | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'Documentation/sound') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index aded3b4f0889..afdb6ffeae55 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -744,9 +744,12 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. VIA VT8251/VT8237A, SIS966, ULI M5461 + [Multiple options for each card instance] model - force the model name position_fix - Fix DMA pointer (0 = auto, 1 = none, 2 = POSBUF, 3 = FIFO size) probe_mask - Bitmask to probe codecs (default = -1, meaning all slots) + + [Single (global) options] single_cmd - Use single immediate commands to communicate with codecs (for debugging only) enable_msi - Enable Message Signaled Interrupt (MSI) (default = off) @@ -755,8 +758,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. power_save_controller - Reset HD-audio controller in power-saving mode (default = on) - This module supports one card and autoprobe. - + This module supports multiple cards and autoprobe. + Each codec may have a model table for different configurations. If your machine isn't listed there, the default (usually minimal) configuration is set up. You can pass "model=" option to -- cgit v1.2.3