From 45c41b4868c9dbec5d43a4023e77994afa94470f Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Wed, 22 Aug 2007 09:45:03 +0200 Subject: [ALSA] cmipci: fix handling of FM/MIDI port addresses Make sure that the MPU-401 MIDI and OPL-3 FM devices are used only on those chips where they are supported, and that the correct port addresses are used. Signed-off-by: Clemens Ladisch Signed-off-by: Jaroslav Kysela --- Documentation/sound/alsa/ALSA-Configuration.txt | 12 +++++++----- Documentation/sound/alsa/CMIPCI.txt | 10 +++++++--- 2 files changed, 14 insertions(+), 8 deletions(-) (limited to 'Documentation/sound') diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 3df33ea8bae6..85b40057716d 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -365,13 +365,15 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module snd-cmipci ----------------- - Module for C-Media CMI8338 and 8738 PCI sound cards. + Module for C-Media CMI8338/8738/8768/8770 PCI sound cards. - mpu_port - 0x300,0x310,0x320,0x330 = legacy port, - 1 = integrated PCI port, + mpu_port - port address of MIDI interface: + 0x300,0x310,0x320,0x330 = legacy port, + 1 = integrated PCI port (8738 or later), 0 = disable (default) - fm_port - 0x388 = legacy port, - 1 = integrated PCI port (default), + fm_port - port address of OPL-3 FM synthesizer (8x38 only): + 0x388 = legacy port, + 1 = integrated PCI port (default on 8738), 0 = disable soft_ac3 - Software-conversion of raw SPDIF packets (model 033 only) (default = 1) diff --git a/Documentation/sound/alsa/CMIPCI.txt b/Documentation/sound/alsa/CMIPCI.txt index 4b2b15387056..664be46566b8 100644 --- a/Documentation/sound/alsa/CMIPCI.txt +++ b/Documentation/sound/alsa/CMIPCI.txt @@ -1,5 +1,5 @@ - Brief Notes on C-Media 8738/8338 Driver - ======================================= + Brief Notes on C-Media 8338/8738/8768/8770 Driver + ================================================= Takashi Iwai @@ -212,7 +212,9 @@ MIDI CONTROLLER The MPU401-UART interface is disabled as default. You need to set module option "mpu_port" with a valid I/O port address to enable the MIDI support. The valid I/O ports are 0x300, 0x310, 0x320 and 0x330. -Choose the value which doesn't conflict with other cards. +Choose the value which doesn't conflict with other cards. With +CMI8738 and newer chips, you can use "mpu_port=1" to use a PCI port +address that does not conflict with any other card. There is _no_ hardware wavetable function on this chip (except for OPL3 synth below). @@ -230,6 +232,8 @@ Set "fm_port" module option for more cards. The output quality of FM OPL/3 is, however, very weird. I don't know why.. +CMI8768 and newer chips do not have the FM synth. + Joystick and Modem ------------------ -- cgit v1.2.3