From 845cf505cebd159b57b3ae3b25e9ad0eb036f9ab Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Wed, 9 Jan 2008 17:35:05 -0600 Subject: [POWERPC] QE: Add support for Freescale QUICCEngine UART Add support for UART serial ports using a Freescale QUICCEngine. Update booting-without-of.txt to define new properties for a QE UART node. Update the MPC8323E-MDS device tree to add UCC5 as a UART. Update the QE library to support slow UCC devices and modules. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- Documentation/powerpc/booting-without-of.txt | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'Documentation/powerpc') diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index e8c67c9015b3..a13d4578319c 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1619,7 +1619,7 @@ platforms are moved over to use the flattened-device-tree model. Required properties: - device_type : should be "network", "hldc", "uart", "transparent" - "bisync" or "atm". + "bisync", "atm", or "serial". - compatible : could be "ucc_geth" or "fsl_atm" and so on. - model : should be "UCC". - device-id : the ucc number(1-8), corresponding to UCCx in UM. @@ -1632,6 +1632,13 @@ platforms are moved over to use the flattened-device-tree model. - interrupt-parent : the phandle for the interrupt controller that services interrupts for this device. - pio-handle : The phandle for the Parallel I/O port configuration. + - port-number : for UART drivers, the port number to use, between 0 and 3. + This usually corresponds to the /dev/ttyQE device, e.g. <0> = /dev/ttyQE0. + The port number is added to the minor number of the device. Unlike the + CPM UART driver, the port-number is required for the QE UART driver. + - soft-uart : for UART drivers, if specified this means the QE UART device + driver should use "Soft-UART" mode, which is needed on some SOCs that have + broken UART hardware. Soft-UART is provided via a microcode upload. - rx-clock-name: the UCC receive clock source "none": clock source is disabled "brg1" through "brg16": clock source is BRG1-BRG16, respectively -- cgit v1.2.3