From eb35279dd7c7834d6320edf24e1b9786d31e4899 Mon Sep 17 00:00:00 2001 From: Matt Ranostay Date: Wed, 24 May 2017 22:52:29 -0700 Subject: iio: proximity: as3935: noise detection + threshold changes Most applications are too noisy to allow the default noise and watchdog settings, and thus need to be configurable via DT properties. Also default settings to POR defaults on a reset, and register distuber interrupts as noise since it prevents proper usage. Cc: devicetree@vger.kernel.org Signed-off-by: Matt Ranostay Acked-by: Rob Herring Signed-off-by: Jonathan Cameron --- Documentation/devicetree/bindings/iio/proximity/as3935.txt | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt index 38d74314b7ab..b6c1afa6f02d 100644 --- a/Documentation/devicetree/bindings/iio/proximity/as3935.txt +++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt @@ -16,6 +16,10 @@ Optional properties: - ams,tuning-capacitor-pf: Calibration tuning capacitor stepping value 0 - 120pF. This will require using the calibration data from the manufacturer. + - ams,nflwdth: Set the noise and watchdog threshold register on + startup. This will need to set according to the noise from the + MCU board, and possibly the local environment. Refer to the + datasheet for the threshold settings. Example: @@ -27,4 +31,5 @@ as3935@0 { interrupt-parent = <&gpio1>; interrupts = <16 1>; ams,tuning-capacitor-pf = <80>; + ams,nflwdth = <0x44>; }; -- cgit v1.2.3