From 3185fe1d8a4557ec84d9617274a694af0cf4c7da Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Fri, 29 Nov 2019 22:39:11 +0100 Subject: dt-bindings: power: avs: Add support for CPR (Core Power Reduction) Add DT bindings to describe the CPR HW found on certain Qualcomm SoCs. Co-developed-by: Jorge Ramirez-Ortiz Signed-off-by: Jorge Ramirez-Ortiz Signed-off-by: Niklas Cassel Reviewed-by: Rob Herring Reviewed-by: Bjorn Andersson Reviewed-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki --- .../devicetree/bindings/power/avs/qcom,cpr.txt | 130 +++++++++++++++++++++ 1 file changed, 130 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/avs/qcom,cpr.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt b/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt new file mode 100644 index 000000000000..ab0d5ebbad4e --- /dev/null +++ b/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt @@ -0,0 +1,130 @@ +QCOM CPR (Core Power Reduction) + +CPR (Core Power Reduction) is a technology to reduce core power on a CPU +or other device. Each OPP of a device corresponds to a "corner" that has +a range of valid voltages for a particular frequency. While the device is +running at a particular frequency, CPR monitors dynamic factors such as +temperature, etc. and suggests adjustments to the voltage to save power +and meet silicon characteristic requirements. + +- compatible: + Usage: required + Value type: + Definition: should be "qcom,qcs404-cpr", "qcom,cpr" for qcs404 + +- reg: + Usage: required + Value type: + Definition: base address and size of the rbcpr register region + +- interrupts: + Usage: required + Value type: + Definition: should specify the CPR interrupt + +- clocks: + Usage: required + Value type: + Definition: phandle to the reference clock + +- clock-names: + Usage: required + Value type: + Definition: must be "ref" + +- vdd-apc-supply: + Usage: required + Value type: + Definition: phandle to the vdd-apc-supply regulator + +- #power-domain-cells: + Usage: required + Value type: + Definition: should be 0 + +- operating-points-v2: + Usage: required + Value type: + Definition: A phandle to the OPP table containing the + performance states supported by the CPR + power domain + +- acc-syscon: + Usage: optional + Value type: + Definition: phandle to syscon for writing ACC settings + +- nvmem-cells: + Usage: required + Value type: + Definition: phandle to nvmem cells containing the data + that makes up a fuse corner, for each fuse corner. + As well as the CPR fuse revision. + +- nvmem-cell-names: + Usage: required + Value type: + Definition: should be "cpr_quotient_offset1", "cpr_quotient_offset2", + "cpr_quotient_offset3", "cpr_init_voltage1", + "cpr_init_voltage2", "cpr_init_voltage3", "cpr_quotient1", + "cpr_quotient2", "cpr_quotient3", "cpr_ring_osc1", + "cpr_ring_osc2", "cpr_ring_osc3", "cpr_fuse_revision" + for qcs404. + +Example: + + cpr_opp_table: cpr-opp-table { + compatible = "operating-points-v2-qcom-level"; + + cpr_opp1: opp1 { + opp-level = <1>; + qcom,opp-fuse-level = <1>; + }; + cpr_opp2: opp2 { + opp-level = <2>; + qcom,opp-fuse-level = <2>; + }; + cpr_opp3: opp3 { + opp-level = <3>; + qcom,opp-fuse-level = <3>; + }; + }; + + power-controller@b018000 { + compatible = "qcom,qcs404-cpr", "qcom,cpr"; + reg = <0x0b018000 0x1000>; + interrupts = <0 15 IRQ_TYPE_EDGE_RISING>; + clocks = <&xo_board>; + clock-names = "ref"; + vdd-apc-supply = <&pms405_s3>; + #power-domain-cells = <0>; + operating-points-v2 = <&cpr_opp_table>; + acc-syscon = <&tcsr>; + + nvmem-cells = <&cpr_efuse_quot_offset1>, + <&cpr_efuse_quot_offset2>, + <&cpr_efuse_quot_offset3>, + <&cpr_efuse_init_voltage1>, + <&cpr_efuse_init_voltage2>, + <&cpr_efuse_init_voltage3>, + <&cpr_efuse_quot1>, + <&cpr_efuse_quot2>, + <&cpr_efuse_quot3>, + <&cpr_efuse_ring1>, + <&cpr_efuse_ring2>, + <&cpr_efuse_ring3>, + <&cpr_efuse_revision>; + nvmem-cell-names = "cpr_quotient_offset1", + "cpr_quotient_offset2", + "cpr_quotient_offset3", + "cpr_init_voltage1", + "cpr_init_voltage2", + "cpr_init_voltage3", + "cpr_quotient1", + "cpr_quotient2", + "cpr_quotient3", + "cpr_ring_osc1", + "cpr_ring_osc2", + "cpr_ring_osc3", + "cpr_fuse_revision"; + }; -- cgit v1.2.3 From c49a5d0968690a08378fd14371678c3479f269aa Mon Sep 17 00:00:00 2001 From: Leonard Crestez Date: Fri, 22 Nov 2019 23:45:02 +0200 Subject: dt-bindings: memory: Add bindings for imx8m ddr controller Add devicetree bindings for the i.MX DDR Controller on imx8m series chips. It supports dynamic frequency switching between multiple data rates and this is exposed to Linux via the devfreq subsystem. Signed-off-by: Leonard Crestez Acked-by: Chanwoo Choi Reviewed-by: Rob Herring Signed-off-by: Chanwoo Choi --- .../memory-controllers/fsl/imx8m-ddrc.yaml | 72 ++++++++++++++++++++++ 1 file changed, 72 insertions(+) create mode 100644 Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml new file mode 100644 index 000000000000..c9e6c22cb5be --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/fsl/imx8m-ddrc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX8M DDR Controller + +maintainers: + - Leonard Crestez + +description: + The DDRC block is integrated in i.MX8M for interfacing with DDR based + memories. + + It supports switching between different frequencies at runtime but during + this process RAM itself becomes briefly inaccessible so actual frequency + switching is implemented by TF-A code which runs from a SRAM area. + + The Linux driver for the DDRC doesn't even map registers (they're included + for the sake of "describing hardware"), it mostly just exposes firmware + capabilities through standard Linux mechanism like devfreq and OPP tables. + +properties: + compatible: + items: + - enum: + - fsl,imx8mn-ddrc + - fsl,imx8mm-ddrc + - fsl,imx8mq-ddrc + - const: fsl,imx8m-ddrc + + reg: + maxItems: 1 + description: + Base address and size of DDRC CTL area. + This is not currently mapped by the imx8m-ddrc driver. + + clocks: + maxItems: 4 + + clock-names: + items: + - const: core + - const: pll + - const: alt + - const: apb + + operating-points-v2: true + opp-table: true + +required: + - reg + - compatible + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + ddrc: memory-controller@3d400000 { + compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc"; + reg = <0x3d400000 0x400000>; + clock-names = "core", "pll", "alt", "apb"; + clocks = <&clk IMX8MM_CLK_DRAM_CORE>, + <&clk IMX8MM_DRAM_PLL>, + <&clk IMX8MM_CLK_DRAM_ALT>, + <&clk IMX8MM_CLK_DRAM_APB>; + operating-points-v2 = <&ddrc_opp_table>; + }; -- cgit v1.2.3