From 3d7d248cf484fe37595698e0ca31a9bcecc85a42 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Thu, 13 Jun 2013 09:50:35 +0200 Subject: HID: i2c-hid: add DT bindings Add device tree based support for HID over I2C devices. Tested on an Odroid-X board with a Synaptics touchpad. Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina --- .../devicetree/bindings/hid/hid-over-i2c.txt | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/hid/hid-over-i2c.txt (limited to 'Documentation/devicetree/bindings') diff --git a/Documentation/devicetree/bindings/hid/hid-over-i2c.txt b/Documentation/devicetree/bindings/hid/hid-over-i2c.txt new file mode 100644 index 000000000000..488edcb264c4 --- /dev/null +++ b/Documentation/devicetree/bindings/hid/hid-over-i2c.txt @@ -0,0 +1,28 @@ +* HID over I2C Device-Tree bindings + +HID over I2C provides support for various Human Interface Devices over the +I2C bus. These devices can be for example touchpads, keyboards, touch screens +or sensors. + +The specification has been written by Microsoft and is currently available here: +http://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx + +If this binding is used, the kernel module i2c-hid will handle the communication +with the device and the generic hid core layer will handle the protocol. + +Required properties: +- compatible: must be "hid-over-i2c" +- reg: i2c slave address +- hid-descr-addr: HID descriptor address +- interrupt-parent: the phandle for the interrupt controller +- interrupts: interrupt line + +Example: + + i2c-hid-dev@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x0020>; + interrupt-parent = <&gpx3>; + interrupts = <3 2>; + }; -- cgit v1.2.3