From 05e85d4e0180dbbce823e19d81388e60ac924be1 Mon Sep 17 00:00:00 2001 From: Arnaud Pouliquen Date: Mon, 22 Jun 2015 16:31:05 +0200 Subject: ASoC: sti: add binding for ASoC driver Add ASoC driver bindings documentation. Describe the required properties for each of the hardware IPs drivers. Signed-off-by: Arnaud Pouliquen Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/st,sti-asoc-card.txt | 155 +++++++++++++++++++++ 1 file changed, 155 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt (limited to 'Documentation/devicetree/bindings/sound') diff --git a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt new file mode 100644 index 000000000000..028fa1c82f50 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt @@ -0,0 +1,155 @@ +STMicroelectronics sti ASoC cards + +The sti ASoC Sound Card can be used, for all sti SoCs using internal sti-sas +codec or external codecs. + +sti sound drivers allows to expose sti SoC audio interface through the +generic ASoC simple card. For details about sound card declaration please refer to +Documentation/devicetree/bindings/sound/simple-card.txt. + +1) sti-uniperiph-dai: audio dai device. +--------------------------------------- + +Required properties: + - compatible: "st,sti-uni-player" or "st,sti-uni-reader" + + - st,syscfg: phandle to boot-device system configuration registers + + - clock-names: name of the clocks listed in clocks property in the same order + + - reg: CPU DAI IP Base address and size entries, listed in same + order than the CPU_DAI properties. + + - reg-names: names of the mapped memory regions listed in regs property in + the same order. + + - interrupts: CPU_DAI interrupt line, listed in the same order than the + CPU_DAI properties. + + - dma: CPU_DAI DMA controller phandle and DMA request line, listed in the same + order than the CPU_DAI properties. + + - dma-names: identifier string for each DMA request line in the dmas property. + "tx" for "st,sti-uni-player" compatibility + "rx" for "st,sti-uni-reader" compatibility + + - version: IP version integrated in SOC. + + - dai-name: DAI name that describes the IP. + +Required properties ("st,sti-uni-player" compatibility only): + - clocks: CPU_DAI IP clock source, listed in the same order than the + CPU_DAI properties. + + - uniperiph-id: internal SOC IP instance ID. + + - IP mode: IP working mode depending on associated codec. + "HDMI" connected to HDMI codec IP and IEC HDMI formats. + "SPDIF"connected to SPDIF codec and support SPDIF formats. + "PCM" PCM standard mode for I2S or TDM bus. + +Optional properties: + - pinctrl-0: defined for CPU_DAI@1 and CPU_DAI@4 to describe I2S PIOs for + external codecs connection. + + - pinctrl-names: should contain only one value - "default". + +Example: + + sti_uni_player2: sti-uni-player@2 { + compatible = "st,sti-uni-player"; + status = "okay"; + #sound-dai-cells = <0>; + st,syscfg = <&syscfg_core>; + clocks = <&clk_s_d0_flexgen CLK_PCM_2>; + reg = <0x8D82000 0x158>; + interrupts = ; + dmas = <&fdma0 4 0 1>; + dai-name = "Uni Player #1 (DAC)"; + dma-names = "tx"; + uniperiph-id = <2>; + version = <5>; + mode = "PCM"; + }; + + sti_uni_player3: sti-uni-player@3 { + compatible = "st,sti-uni-player"; + status = "okay"; + #sound-dai-cells = <0>; + st,syscfg = <&syscfg_core>; + clocks = <&clk_s_d0_flexgen CLK_SPDIFF>; + reg = <0x8D85000 0x158>; + interrupts = ; + dmas = <&fdma0 7 0 1>; + dma-names = "tx"; + dai-name = "Uni Player #1 (PIO)"; + uniperiph-id = <3>; + version = <5>; + mode = "SPDIF"; + }; + + sti_uni_reader1: sti-uni-reader@1 { + compatible = "st,sti-uni-reader"; + status = "disabled"; + #sound-dai-cells = <0>; + st,syscfg = <&syscfg_core>; + reg = <0x8D84000 0x158>; + interrupts = ; + dmas = <&fdma0 6 0 1>; + dma-names = "rx"; + dai-name = "Uni Reader #1 (HDMI RX)"; + version = <3>; + }; + +2) sti-sas-codec: internal audio codec IPs driver +------------------------------------------------- + +Required properties: + - compatible: "st,sti-sas-codec" . + Should be chip "st,stih416-sas-codec" or "st,stih407-sas-codec" + + - st,syscfg: phandle to boot-device system configuration registers. + + - pinctrl-0: SPDIF PIO description. + + - pinctrl-names: should contain only one value - "default". + +Example: + sti_sas_codec: sti-sas-codec { + compatible = "st,stih407-sas-codec"; + #sound-dai-cells = <1>; + st,reg_audio = <&syscfg_core>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif_out >; + }; + +Example of audio card declaration: + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "sti audio card"; + status = "okay"; + + simple-audio-card,dai-link@0 { + /* DAC */ + format = "i2s"; + dai-tdm-slot-width = <32>; + cpu { + sound-dai = <&sti_uni_player2>; + }; + + codec { + sound-dai = <&sti_sasg_codec 1>; + }; + }; + simple-audio-card,dai-link@1 { + /* SPDIF */ + format = "left_j"; + cpu { + sound-dai = <&sti_uni_player3>; + }; + + codec { + sound-dai = <&sti_sasg_codec 0>; + }; + }; + }; -- cgit v1.2.3 From 5119222f2e3de2e51a3b3270036d53c55ce68236 Mon Sep 17 00:00:00 2001 From: Anatol Pomozov Date: Sun, 12 Jul 2015 08:14:19 -0700 Subject: ASoC: max98357a: Make 'sdmode-gpios' dts property optional The option is not needed if chip is always on or managed by some other part of system like platform card driver. Signed-off-by: Anatol Pomozov Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/max98357a.txt | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree/bindings/sound') diff --git a/Documentation/devicetree/bindings/sound/max98357a.txt b/Documentation/devicetree/bindings/sound/max98357a.txt index a7a149a236e5..28645a2ff885 100644 --- a/Documentation/devicetree/bindings/sound/max98357a.txt +++ b/Documentation/devicetree/bindings/sound/max98357a.txt @@ -4,7 +4,11 @@ This node models the Maxim MAX98357A DAC. Required properties: - compatible : "maxim,max98357a" -- sdmode-gpios : GPIO specifier for the GPIO -> DAC SDMODE pin + +Optional properties: +- sdmode-gpios : GPIO specifier for the chip's SD_MODE pin. + If this option is not specified then driver does not manage + the pin state (e.g. chip is always on). Example: -- cgit v1.2.3 From e40da86a37f64c73b810bc7a63d77c44dc61accb Mon Sep 17 00:00:00 2001 From: Tim Howe Date: Thu, 16 Jul 2015 14:51:40 -0500 Subject: ASoC: cs4349: Add support for Cirrus Logic CS4349 Signed-off-by: Tim Howe Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/cs4349.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/cs4349.txt (limited to 'Documentation/devicetree/bindings/sound') diff --git a/Documentation/devicetree/bindings/sound/cs4349.txt b/Documentation/devicetree/bindings/sound/cs4349.txt new file mode 100644 index 000000000000..54c117b59dba --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cs4349.txt @@ -0,0 +1,19 @@ +CS4349 audio CODEC + +Required properties: + + - compatible : "cirrus,cs4349" + + - reg : the I2C address of the device for I2C + +Optional properties: + + - reset-gpios : a GPIO spec for the reset pin. + +Example: + +codec: cs4349@48 { + compatible = "cirrus,cs4349"; + reg = <0x48>; + reset-gpios = <&gpio 54 0>; +}; -- cgit v1.2.3 From b7419dd73606118b8797d49b53a9fbe2e2dfa863 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 15 Jul 2015 07:08:05 +0000 Subject: ASoC: rsrc-card: use snd_soc_of_parse_audio_route/prefix for routing using common audio routing path method makes sense. Let's use snd_soc_of_parse_audio_route/prefix. Signed-off-by: Kuninori Morimoto Tested-by: Keita Kobayashi Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'Documentation/devicetree/bindings/sound') diff --git a/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt b/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt index c64155027288..962748a8d919 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt @@ -6,6 +6,7 @@ Required properties: - compatible : "renesas,rsrc-card," Examples with soctypes are: + - "renesas,rsrc-card" - "renesas,rsrc-card,lager" - "renesas,rsrc-card,koelsch" Optional properties: @@ -29,6 +30,12 @@ Optional subnode properties: - frame-inversion : bool property. Add this if the dai-link uses frame clock inversion. - convert-rate : platform specified sampling rate convert +- audio-prefix : see audio-routing +- audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. Valid names for sources. + use audio-prefix if some components is using same sink/sources naming. + it can be used if compatible was "renesas,rsrc-card"; Required CPU/CODEC subnodes properties: -- cgit v1.2.3 From 9269e3c3cfac277a49b485e27ac6850f9a11a259 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 15 Jul 2015 07:17:17 +0000 Subject: ASoC: rsnd: add CTU (Channel Transfer Unit) prototype support This patch adds CTU (Channel Transfer Unit) support for rsnd driver. But, it does nothing to data at this point, but is required for MIX support. CTU design is a little different from other IPs (CTU0 is including CTU00 - CTU03, and CTU1 is including CTU10 - CTU13, these have different register mapping) We need to care about it on this driver. Signed-off-by: Kuninori Morimoto Tested-by: Keita Kobayashi Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/renesas,rsnd.txt | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'Documentation/devicetree/bindings/sound') diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index b6b3a786855f..278607de05de 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -18,6 +18,9 @@ Required properties: - rcar_sound,src : Should contain SRC feature. The number of SRC subnode should be same as HW. see below for detail. +- rcar_sound,ctu : Should contain CTU feature. + The number of CTU subnode should be same as HW. + see below for detail. - rcar_sound,dvc : Should contain DVC feature. The number of DVC subnode should be same as HW. see below for detail. @@ -90,6 +93,17 @@ rcar_sound: sound@ec500000 { }; }; + rcar_sound,ctu { + ctu00: ctu@0 { }; + ctu01: ctu@1 { }; + ctu02: ctu@2 { }; + ctu03: ctu@3 { }; + ctu10: ctu@4 { }; + ctu11: ctu@5 { }; + ctu12: ctu@6 { }; + ctu13: ctu@7 { }; + }; + rcar_sound,src { src0: src@0 { interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; -- cgit v1.2.3 From 70fb10529f61c31c26397a02091177bedd23217d Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 15 Jul 2015 07:17:36 +0000 Subject: ASoC: rsnd: add MIX (Mixer) support This patch adds MIX (Mixer) initial support for rsnd driver. It is assuming that this MIX is used via DPCM. This is sample code for playback. CPU0 : [MEM] -> [SRC1] -> [CTU02] -+ | +-> [MIX0] -> [DVC0] -> [SSI0] | CPU1 : [MEM] -> [SRC2] -> [CTU03] -+ sound { compatible = "renesas,rsrc-card"; ... cpu@0 { sound-dai = <&rcar_sound 0>; }; cpu@1 { sound-dai = <&rcar_sound 1>; }; codec { ... }; }; rcar_sound { ... rcar_sound,dai { dai0 { playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>; }; dai1 { playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>; }; }; }; Signed-off-by: Kuninori Morimoto Tested-by: Keita Kobayashi Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/renesas,rsnd.txt | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'Documentation/devicetree/bindings/sound') diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index 278607de05de..1173395b5e5c 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -21,6 +21,9 @@ Required properties: - rcar_sound,ctu : Should contain CTU feature. The number of CTU subnode should be same as HW. see below for detail. +- rcar_sound,mix : Should contain MIX feature. + The number of MIX subnode should be same as HW. + see below for detail. - rcar_sound,dvc : Should contain DVC feature. The number of DVC subnode should be same as HW. see below for detail. @@ -93,6 +96,11 @@ rcar_sound: sound@ec500000 { }; }; + rcar_sound,mix { + mix0: mix@0 { }; + mix1: mix@1 { }; + }; + rcar_sound,ctu { ctu00: ctu@0 { }; ctu01: ctu@1 { }; -- cgit v1.2.3 From 49bdb0440541ad1144ad08d5613f9a28bcd2a8dc Mon Sep 17 00:00:00 2001 From: zhengxing Date: Sun, 19 Jul 2015 19:33:48 +0800 Subject: ASoC: rockchip: Add machine driver for max98090 codec The driver is used for rockchip board using a max98090. Reviewed-by: Dylan Reid Signed-off-by: zhengxing Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/rockchip-max98090.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/rockchip-max98090.txt (limited to 'Documentation/devicetree/bindings/sound') diff --git a/Documentation/devicetree/bindings/sound/rockchip-max98090.txt b/Documentation/devicetree/bindings/sound/rockchip-max98090.txt new file mode 100644 index 000000000000..a805aa99ad75 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rockchip-max98090.txt @@ -0,0 +1,19 @@ +ROCKCHIP with MAX98090 CODEC + +Required properties: +- compatible: "rockchip,rockchip-audio-max98090" +- rockchip,model: The user-visible name of this sound complex +- rockchip,i2s-controller: The phandle of the Rockchip I2S controller that's + connected to the CODEC +- rockchip,audio-codec: The phandle of the MAX98090 audio codec +- rockchip,headset-codec: The phandle of Ext chip for jack detection + +Example: + +sound { + compatible = "rockchip,rockchip-audio-max98090"; + rockchip,model = "ROCKCHIP-I2S"; + rockchip,i2s-controller = <&i2s>; + rockchip,audio-codec = <&max98090>; + rockchip,headset-codec = <&headsetcodec>; +}; -- cgit v1.2.3 From 86059653ea7ca7b30ed25d6bec5807ba59a4f2e6 Mon Sep 17 00:00:00 2001 From: zhengxing Date: Sun, 19 Jul 2015 19:33:49 +0800 Subject: ASoC: rockchip: Add machine driver for rt5645/rt5650 codec The driver is used for rockchip board using a rt5645/rt5650. Reviewed-by: Dylan Reid Signed-off-by: zhengxing Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/rockchip-rt5645.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/rockchip-rt5645.txt (limited to 'Documentation/devicetree/bindings/sound') diff --git a/Documentation/devicetree/bindings/sound/rockchip-rt5645.txt b/Documentation/devicetree/bindings/sound/rockchip-rt5645.txt new file mode 100644 index 000000000000..411a62b3ff41 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rockchip-rt5645.txt @@ -0,0 +1,17 @@ +ROCKCHIP with RT5645/RT5650 CODECS + +Required properties: +- compatible: "rockchip,rockchip-audio-rt5645" +- rockchip,model: The user-visible name of this sound complex +- rockchip,i2s-controller: The phandle of the Rockchip I2S controller that's + connected to the CODEC +- rockchip,audio-codec: The phandle of the RT5645/RT5650 audio codec + +Example: + +sound { + compatible = "rockchip,rockchip-audio-rt5645"; + rockchip,model = "ROCKCHIP-I2S"; + rockchip,i2s-controller = <&i2s>; + rockchip,audio-codec = <&rt5645>; +}; -- cgit v1.2.3 From 3b7ce99748f0d006f9d1aa85709872e7b46787f7 Mon Sep 17 00:00:00 2001 From: Ricard Wanderlof Date: Thu, 27 Aug 2015 11:35:20 +0200 Subject: ASoC: ics43432: Add codec driver for InvenSense ICS-43432 Add support for the InvenSense ICS-43432 I2S MEMS microphone. This is a non-software-configurable MEMS microphone with I2S output. Tested on a setup with a single ICS-43432 (the device itself supports stereo operation using a hardware pin controlling left vs. right channel output). Signed-off-by: Ricard Wanderlof Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/ics43432.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ics43432.txt (limited to 'Documentation/devicetree/bindings/sound') diff --git a/Documentation/devicetree/bindings/sound/ics43432.txt b/Documentation/devicetree/bindings/sound/ics43432.txt new file mode 100644 index 000000000000..b02e3a6c0fef --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ics43432.txt @@ -0,0 +1,17 @@ +Invensense ICS-43432 MEMS microphone with I2S output. + +There are no software configuration options for this device, indeed, the only +host connection is the I2S interface. Apart from requirements on clock +frequency (460 kHz to 3.379 MHz according to the data sheet) there must be +64 clock cycles in each stereo output frame; 24 of the 32 available bits +contain audio data. A hardware pin determines if the device outputs data +on the left or right channel of the I2S frame. + +Required properties: + - compatible : Must be "invensense,ics43432" + +Example: + + ics43432: ics43432 { + compatible = "invensense,ics43432"; + }; -- cgit v1.2.3