From 890e48be8d8470ab7057408865069ed6f8fd2745 Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Tue, 21 Aug 2018 18:42:29 +0200 Subject: dt-bindings: pinctrl: Update pinctrl-ingenic for JZ4725B and GPIO merge The pinctrl-ingenic driver now supports the JZ4725B SoC. Furthermore, the gpio-ingenic driver was dropped and the pinctrl-ingenic driver is now responsible for providing the GPIO functionality. Signed-off-by: Paul Cercueil Reviewed-by: Rob Herring Signed-off-by: Linus Walleij --- .../bindings/pinctrl/ingenic,pinctrl.txt | 39 +++++++++++++++++++--- 1 file changed, 35 insertions(+), 4 deletions(-) (limited to 'Documentation/devicetree/bindings/pinctrl') diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt index ca313a7aeaff..af20b0ec715c 100644 --- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt @@ -20,16 +20,30 @@ Required properties: - compatible: One of: - "ingenic,jz4740-pinctrl" + - "ingenic,jz4725b-pinctrl" - "ingenic,jz4770-pinctrl" - "ingenic,jz4780-pinctrl" - reg: Address range of the pinctrl registers. -GPIO sub-nodes --------------- +Required properties for sub-nodes (GPIO chips): +----------------------------------------------- -The pinctrl node can have optional sub-nodes for the Ingenic GPIO driver; -please refer to ../gpio/ingenic,gpio.txt. + - compatible: Must contain one of: + - "ingenic,jz4740-gpio" + - "ingenic,jz4770-gpio" + - "ingenic,jz4780-gpio" + - reg: The GPIO bank number. + - interrupt-controller: Marks the device node as an interrupt controller. + - interrupts: Interrupt specifier for the controllers interrupt. + - #interrupt-cells: Should be 2. Refer to + ../interrupt-controller/interrupts.txt for more details. + - gpio-controller: Marks the device node as a GPIO controller. + - #gpio-cells: Should be 2. The first cell is the GPIO number and the second + cell specifies GPIO flags, as defined in . Only the + GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported. + - gpio-ranges: Range of pins managed by the GPIO controller. Refer to + ../gpio/gpio.txt for more details. Example: @@ -38,4 +52,21 @@ Example: pinctrl: pin-controller@10010000 { compatible = "ingenic,jz4740-pinctrl"; reg = <0x10010000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + gpa: gpio@0 { + compatible = "ingenic,jz4740-gpio"; + reg = <0>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <28>; + }; }; -- cgit v1.2.3