From d95faaec4763b94c9eedac9a1f933753015651ed Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Thu, 6 Mar 2014 16:38:38 +0200 Subject: phy: omap-control: Update DT binding information Move omap-control binding information to the right location. Acked-by: Kishon Vijay Abraham I Signed-off-by: Roger Quadros Signed-off-by: Felipe Balbi --- Documentation/devicetree/bindings/phy/ti-phy.txt | 25 ++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'Documentation/devicetree/bindings/phy/ti-phy.txt') diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt index 207e14cc650c..41dc132e7828 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -1,5 +1,30 @@ TI PHY: DT DOCUMENTATION FOR PHYs in TI PLATFORMs +OMAP CONTROL PHY + +Required properties: + - compatible: Should be one of + "ti,control-phy-otghs" - if it has otghs_control mailbox register as on OMAP4. + "ti,control-phy-usb2" - if it has Power down bit in control_dev_conf register + e.g. USB2_PHY on OMAP5. + "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control + e.g. USB3 PHY and SATA PHY on OMAP5. + "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on + DRA7 platform. + "ti,control-phy-am437usb2" - if it has power down register like USB2 PHY on + AM437 platform. + - reg : Address and length of the register set for the device. It contains + the address of "otghs_control" for control-phy-otghs or "power" register + for other types. + - reg-names: should be "otghs_control" control-phy-otghs and "power" for + other types. + +omap_control_usb: omap-control-usb@4a002300 { + compatible = "ti,control-phy-otghs"; + reg = <0x4a00233c 0x4>; + reg-names = "otghs_control"; +}; + OMAP USB2 PHY Required properties: -- cgit v1.2.3