From 96f6360c5a0c20fd3e006c3030aac0d1addbe3d9 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 4 Nov 2012 21:34:51 +0000 Subject: net: at91_ether: add dt support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Tested-by: Joachim Eastwood Cc: Nicolas Ferre Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller --- .../devicetree/bindings/net/cdns-emac.txt | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/cdns-emac.txt (limited to 'Documentation/devicetree/bindings/net') diff --git a/Documentation/devicetree/bindings/net/cdns-emac.txt b/Documentation/devicetree/bindings/net/cdns-emac.txt new file mode 100644 index 000000000000..09055c2495f0 --- /dev/null +++ b/Documentation/devicetree/bindings/net/cdns-emac.txt @@ -0,0 +1,23 @@ +* Cadence EMAC Ethernet controller + +Required properties: +- compatible: Should be "cdns,[-]{emac}" + Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC. + or the generic form: "cdns,emac". +- reg: Address and length of the register set for the device +- interrupts: Should contain macb interrupt +- phy-mode: String, operation mode of the PHY interface. + Supported values are: "mii", "rmii". + +Optional properties: +- local-mac-address: 6 bytes, mac address + +Examples: + + macb0: ethernet@fffc4000 { + compatible = "cdns,at91rm9200-emac"; + reg = <0xfffc4000 0x4000>; + interrupts = <21>; + phy-mode = "rmii"; + local-mac-address = [3a 0e 03 04 05 06]; + }; -- cgit v1.2.3