From b727db94e3ba451a6941b0f8d8714f9f260ab110 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 17 Sep 2020 20:56:13 +0200 Subject: dt-bindings: mfd: Correct interrupt flags in examples GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning: 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING Correct the interrupt flags, assuming the author of the code wanted same logical behavior behind the name "ACTIVE_xxx", this is: ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW Signed-off-by: Krzysztof Kozlowski Acked-by: Matti Vaittinen # for BD70528 Acked-by: Tim Harvey # for gateworks-gsc.yaml Acked-by: Rob Herring Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt') diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt index c3c02ce73cde..386eec06cf08 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt +++ b/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt @@ -39,7 +39,7 @@ pmic: pmic@4b { compatible = "rohm,bd70528"; reg = <0x4b>; interrupt-parent = <&gpio1>; - interrupts = <29 GPIO_ACTIVE_LOW>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; clocks = <&osc 0>; #clock-cells = <0>; clock-output-names = "bd70528-32k-out"; -- cgit v1.2.3