From 1af824649b44382af2361eefc5bd50a92f6b3d1b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 24 Jul 2019 15:49:58 +0200 Subject: drm/pl111: Deprecate the pads from the DT binding The pads were an earlier workaround for the internal image pipeline in the Linux fbdev subsystem. As we move to generic definition of display properties and drivers that no longer need this to work, deprecate this property. Cc: Pawel Moll Cc: Liviu Dudau Cc: devicetree@vger.kernel.org Reviewed-by: Sam Ravnborg Signed-off-by: Linus Walleij Link: https://patchwork.freedesktop.org/patch/msgid/20190724134959.2365-1-linus.walleij@linaro.org --- Documentation/devicetree/bindings/display/arm,pl11x.txt | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'Documentation/devicetree/bindings/display') diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.txt b/Documentation/devicetree/bindings/display/arm,pl11x.txt index 572fa2773ec4..3f977e72a200 100644 --- a/Documentation/devicetree/bindings/display/arm,pl11x.txt +++ b/Documentation/devicetree/bindings/display/arm,pl11x.txt @@ -39,9 +39,11 @@ Required sub-nodes: - port: describes LCD panel signals, following the common binding for video transmitter interfaces; see - Documentation/devicetree/bindings/media/video-interfaces.txt; - when it is a TFT panel, the port's endpoint must define the - following property: + Documentation/devicetree/bindings/media/video-interfaces.txt + +Deprecated properties: + The port's endbpoint subnode had this, now deprecated property + in the past. Drivers should be able to survive without it: - arm,pl11x,tft-r0g0b0-pads: an array of three 32-bit values, defining the way CLD pads are wired up; first value @@ -80,7 +82,6 @@ Example: port { clcd_pads: endpoint { remote-endpoint = <&clcd_panel>; - arm,pl11x,tft-r0g0b0-pads = <0 8 16>; }; }; -- cgit v1.2.3