From 13f82efc3251e4e7f93354dc1a3a63e49ecee477 Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Thu, 24 Aug 2017 15:33:58 +0200 Subject: dt-bindings: exynos5433-decon: remove i80-if-timings property Since i80/command mode is determined in runtime by propagating info from panel this property can be removed. Signed-off-by: Andrzej Hajda Signed-off-by: Inki Dae --- .../devicetree/bindings/display/exynos/exynos5433-decon.txt | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'Documentation/devicetree/bindings/display/exynos') diff --git a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt index 549c538b38a5..fc2588292a68 100644 --- a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt +++ b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt @@ -25,12 +25,6 @@ Required properties: size-cells must 1 and 0, respectively. - port: contains an endpoint node which is connected to the endpoint in the mic node. The reg value muset be 0. -- i80-if-timings: specify whether the panel which is connected to decon uses - i80 lcd interface or mipi video interface. This node contains - no timing information as that of fimd does. Because there is - no register in decon to specify i80 interface timing value, - it is not needed, but make it remain to use same kind of node - in fimd and exynos7 decon. Example: SoC specific DT entry: @@ -59,9 +53,3 @@ decon: decon@13800000 { }; }; }; - -Board specific DT entry: -&decon { - i80-if-timings { - }; -}; -- cgit v1.2.3