From ac61cf8a01924b0794d0eda80688714368e27d0b Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 23 Apr 2015 15:55:00 -0700 Subject: dt-bindings: Add documentation for the BCM63138 timer and syscon-reboot A timer node and a syscon-reboot node are required for software reboot to work on BCM63138, document these two nodes in the platform binding. Signed-off-by: Florian Fainelli --- .../devicetree/bindings/arm/bcm/brcm,bcm63138.txt | 34 ++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'Documentation/devicetree/bindings/arm/bcm') diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt index 999e074b8ac3..b82b6a0ae6f7 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt @@ -49,3 +49,37 @@ Example: compatible = "brcm,bcm63138-bootlut"; reg = <0x8000 0x50>; }; + +======= +reboot +------ +Two nodes are required for software reboot: a timer node and a syscon-reboot node. + +Timer node: + +- compatible: Must be "brcm,bcm6328-timer", "syscon" +- reg: Register base address and length + +Syscon reboot node: + +See Documentation/devicetree/bindings/power/reset/syscon-reboot.txt for the +detailed list of properties, the two values defined below are specific to the +BCM6328-style timer: + +- offset: Should be 0x34 to denote the offset of the TIMER_WD_TIMER_RESET register + from the beginning of the TIMER block +- mask: Should be 1 for the SoftRst bit. + +Example: + + timer: timer@80 { + compatible = "brcm,bcm6328-timer", "syscon"; + reg = <0x80 0x3c>; + }; + + reboot { + compatible = "syscon-reboot"; + regmap = <&timer>; + offset = <0x34>; + mask = <0x1>; + }; -- cgit v1.2.3