From 8ae06d223f8203c72104e5c0c4ee49a000aedb42 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Fri, 5 Mar 2010 08:59:32 +0800 Subject: x86-32, resume: do a global tlb flush in S4 resume Colin King reported a strange oops in S4 resume code path (see below). The test system has i5/i7 CPU. The kernel doesn't open PAE, so 4M page table is used. The oops always happen a virtual address 0xc03ff000, which is mapped to the last 4k of first 4M memory. Doing a global tlb flush fixes the issue. EIP: 0060:[] EFLAGS: 00010086 CPU: 0 EIP is at copy_loop+0xe/0x15 EAX: 36aeb000 EBX: 00000000 ECX: 00000400 EDX: f55ad46c ESI: 0f800000 EDI: c03ff000 EBP: f67fbec4 ESP: f67fbea8 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 ... ... CR2: 00000000c03ff000 Tested-by: Colin Ian King Signed-off-by: Shaohua Li LKML-Reference: <20100305005932.GA22675@sli10-desk.sh.intel.com> Acked-by: Rafael J. Wysocki Signed-off-by: H. Peter Anvin Cc: --- arch/x86/power/hibernate_asm_32.S | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/arch/x86/power/hibernate_asm_32.S b/arch/x86/power/hibernate_asm_32.S index b641388d8286..ad47daeafa4e 100644 --- a/arch/x86/power/hibernate_asm_32.S +++ b/arch/x86/power/hibernate_asm_32.S @@ -27,10 +27,17 @@ ENTRY(swsusp_arch_suspend) ret ENTRY(restore_image) + movl mmu_cr4_features, %ecx movl resume_pg_dir, %eax subl $__PAGE_OFFSET, %eax movl %eax, %cr3 + jecxz 1f # cr4 Pentium and higher, skip if zero + andl $~(X86_CR4_PGE), %ecx + movl %ecx, %cr4; # turn off PGE + movl %cr3, %eax; # flush TLB + movl %eax, %cr3 +1: movl restore_pblist, %edx .p2align 4,,7 @@ -54,16 +61,8 @@ done: movl $swapper_pg_dir, %eax subl $__PAGE_OFFSET, %eax movl %eax, %cr3 - /* Flush TLB, including "global" things (vmalloc) */ movl mmu_cr4_features, %ecx jecxz 1f # cr4 Pentium and higher, skip if zero - movl %ecx, %edx - andl $~(X86_CR4_PGE), %edx - movl %edx, %cr4; # turn off PGE -1: - movl %cr3, %eax; # flush TLB - movl %eax, %cr3 - jecxz 1f # cr4 Pentium and higher, skip if zero movl %ecx, %cr4; # turn PGE back on 1: -- cgit v1.2.3 From 9f3a5f52aa63d3aa4c64a7245153549bb66bad8c Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 29 Mar 2010 22:38:29 -0700 Subject: x86: Make e820_remove_range to handle all covered case Rusty found on lguest with trim_bios_range, max_pfn is not right anymore, and looks e820_remove_range does not work right. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] LGUEST: 0000000000000000 - 0000000004000000 (usable) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! [ 0.000000] DMI not present or invalid. [ 0.000000] last_pfn = 0x3fa0 max_arch_pfn = 0x100000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000003fa0000 root cause is: the e820_remove_range doesn't handle the all covered case. e820_remove_range(BIOS_START, BIOS_END - BIOS_START, ...) produces a bogus range as a result. Make it match e820_update_range() by handling that case too. Reported-by: Rusty Russell Signed-off-by: Yinghai Lu Tested-by: Rusty Russell LKML-Reference: <4BB18E55.6090903@kernel.org> Signed-off-by: H. Peter Anvin --- arch/x86/kernel/e820.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 740b440fbd73..7bca3c6a02fb 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -519,29 +519,45 @@ u64 __init e820_remove_range(u64 start, u64 size, unsigned old_type, printk(KERN_DEBUG "e820 remove range: %016Lx - %016Lx ", (unsigned long long) start, (unsigned long long) end); - e820_print_type(old_type); + if (checktype) + e820_print_type(old_type); printk(KERN_CONT "\n"); for (i = 0; i < e820.nr_map; i++) { struct e820entry *ei = &e820.map[i]; u64 final_start, final_end; + u64 ei_end; if (checktype && ei->type != old_type) continue; + + ei_end = ei->addr + ei->size; /* totally covered? */ - if (ei->addr >= start && - (ei->addr + ei->size) <= (start + size)) { + if (ei->addr >= start && ei_end <= end) { real_removed_size += ei->size; memset(ei, 0, sizeof(struct e820entry)); continue; } + + /* new range is totally covered? */ + if (ei->addr < start && ei_end > end) { + e820_add_region(end, ei_end - end, ei->type); + ei->size = start - ei->addr; + real_removed_size += size; + continue; + } + /* partially covered */ final_start = max(start, ei->addr); - final_end = min(start + size, ei->addr + ei->size); + final_end = min(end, ei_end); if (final_start >= final_end) continue; real_removed_size += final_end - final_start; + /* + * left range could be head or tail, so need to update + * size at first. + */ ei->size -= final_end - final_start; if (ei->addr < final_start) continue; -- cgit v1.2.3 From 909fc87b32b3b9e3f0b87dcc5d98319c41900c58 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 29 Mar 2010 09:41:11 +0200 Subject: x86: Handle overlapping mptables We found a system where the MP table MPC and MPF structures overlap. That doesn't really matter because the mptable is not used anyways with ACPI, but it leads to a panic in the early allocator due to the overlapping reservations in 2.6.33. Earlier kernels handled this without problems. Simply change these reservations to reserve_early_overlap_ok to avoid the panic. Reported-by: Thomas Renninger Tested-by: Thomas Renninger Signed-off-by: Andi Kleen LKML-Reference: <20100329074111.GA22821@basil.fritz.box> Signed-off-by: H. Peter Anvin Cc: --- arch/x86/kernel/mpparse.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index a2c1edd2d3ac..e81030f71a8f 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -664,7 +664,7 @@ static void __init smp_reserve_memory(struct mpf_intel *mpf) { unsigned long size = get_mpc_size(mpf->physptr); - reserve_early(mpf->physptr, mpf->physptr+size, "MP-table mpc"); + reserve_early_overlap_ok(mpf->physptr, mpf->physptr+size, "MP-table mpc"); } static int __init smp_scan_config(unsigned long base, unsigned long length) @@ -693,7 +693,7 @@ static int __init smp_scan_config(unsigned long base, unsigned long length) mpf, (u64)virt_to_phys(mpf)); mem = virt_to_phys(mpf); - reserve_early(mem, mem + sizeof(*mpf), "MP-table mpf"); + reserve_early_overlap_ok(mem, mem + sizeof(*mpf), "MP-table mpf"); if (mpf->physptr) smp_reserve_memory(mpf); -- cgit v1.2.3 From 337998587f802535896e9ed16d19f97915ccd368 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 31 Mar 2010 20:44:09 -0700 Subject: nobootmem, x86: Fix 32bit numa system without RAM on node 0 On one system without RAM on node0, got following boot dump with a 32 bit NUMA kernel: early_node_map[4] active PFN ranges 1: 0x00000010 -> 0x00000099 1: 0x00000100 -> 0x0007da00 1: 0x0007e800 -> 0x0007ffa0 1: 0x0007ffae -> 0x0007ffb0 ... Subtract (29 early reservations) #000 [0000001000 - 0000002000] #001 [0000089000 - 000008f000] #002 [0000091000 - 0000093500] ... #027 [007cbfef40 - 007e800000] #028 [007e9ca000 - 007ff95000] (0 free memory ranges) Initializing HighMem for node 0 (00000000:00000000) Initializing HighMem for node 1 (00000000:00000000) Memory: 0k/2096832k available (6662k kernel code, 2096300k reserved, 4829k data, 484k init, 0k highmem) ... Checking if this processor honours the WP bit even in supervisor mode...Ok. swapper: page allocation failure. order:0, mode:0x0 Pid: 0, comm: swapper Not tainted 2.6.34-rc3-tip-03818-g4b1ea6c-dirty #35 Call Trace: [<4087a5dc>] ? printk+0xf/0x11 [<40286728>] __alloc_pages_nodemask+0x417/0x487 [<402a9ce1>] new_slab+0xe2/0x1fe [<402aa5b2>] kmem_cache_open+0x185/0x358 [<402abbc0>] T.954+0x1c/0x60 [<40d52a29>] kmem_cache_init+0x24/0x113 [<40d39738>] start_kernel+0x166/0x2e4 [<40d3940e>] ? unknown_bootoption+0x0/0x18e [<40d390ce>] i386_start_kernel+0xce/0xd5 Mem-Info: Node 1 DMA per-cpu: CPU 0: hi: 0, btch: 1 usd: 0 Node 1 Normal per-cpu: CPU 0: hi: 0, btch: 1 usd: 0 active_anon:0 inactive_anon:0 isolated_anon:0 active_file:0 inactive_file:0 isolated_file:0 unevictable:0 dirty:0 writeback:0 unstable:0 free:0 slab_reclaimable:0 slab_unreclaimable:0 mapped:0 shmem:0 pagetables:0 bounce:0 When 32bit NUMA is used, free_all_bootmem() will still only go over with node id 0. If node 0 doesn't have RAM installed, We need to go with node1 because early_node_map still use 1 for all ranges, and ram from node1 become low ram. Use MAX_NUMNODES like 64-bit NUMA does. Note: BOOTMEM path has the same problem. this bug exist before We have NO_BOOTMEM support. -v3: add more comments, and fix bootmem path too. -v4: seperate bootmem path fix Signed-off-by: Yinghai Lu LKML-Reference: <4BB41689.9090502@kernel.org> Signed-off-by: H. Peter Anvin --- mm/bootmem.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/mm/bootmem.c b/mm/bootmem.c index 9b134460b016..2058cb7595f2 100644 --- a/mm/bootmem.c +++ b/mm/bootmem.c @@ -303,7 +303,14 @@ unsigned long __init free_all_bootmem_node(pg_data_t *pgdat) unsigned long __init free_all_bootmem(void) { #ifdef CONFIG_NO_BOOTMEM - return free_all_memory_core_early(NODE_DATA(0)->node_id); + /* + * We need to use MAX_NUMNODES instead of NODE_DATA(0)->node_id + * because in some case like Node0 doesnt have RAM installed + * low ram will be on Node1 + * Use MAX_NUMNODES will make sure all ranges in early_node_map[] + * will be used instead of only Node0 related + */ + return free_all_memory_core_early(MAX_NUMNODES); #else return free_all_bootmem_core(NODE_DATA(0)->bdata); #endif -- cgit v1.2.3 From aa235fc712f379d4194cff9217f07026c452c141 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 31 Mar 2010 20:45:27 -0700 Subject: bootmem, x86: Fix 32bit numa system without RAM on node 0 When 32bit numa is used, free_all_bootmem() will still only go over with node id 0. If node 0 doesn't have RAM installed, the lowest populated node becomes low RAM. This one fixes BOOTMEM path by iterating over the bdata_list. -v3: add more comments, and fix bootmem path too. -v4: seperate from one big patch Signed-off-by: Yinghai Lu LKML-Reference: <4BB416D7.6090203@kernel.org> Signed-off-by: H. Peter Anvin --- mm/bootmem.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/mm/bootmem.c b/mm/bootmem.c index 2058cb7595f2..ba37d62b684a 100644 --- a/mm/bootmem.c +++ b/mm/bootmem.c @@ -312,7 +312,13 @@ unsigned long __init free_all_bootmem(void) */ return free_all_memory_core_early(MAX_NUMNODES); #else - return free_all_bootmem_core(NODE_DATA(0)->bdata); + unsigned long total_pages = 0; + bootmem_data_t *bdata; + + list_for_each_entry(bdata, &bdata_list, list) + total_pages += free_all_bootmem_core(bdata); + + return total_pages; #endif } -- cgit v1.2.3 From 8da854cb02156c90028233ae1e85ce46a1d3f82c Mon Sep 17 00:00:00 2001 From: "Pallipadi, Venkatesh" Date: Thu, 25 Feb 2010 10:53:48 -0800 Subject: x86, hpet: Erratum workaround for read after write of HPET comparator On Wed, Feb 24, 2010 at 03:37:04PM -0800, Justin Piszcz wrote: > Hello, > > Again, on the Intel DP55KG board: > > # uname -a > Linux host 2.6.33 #1 SMP Wed Feb 24 18:31:00 EST 2010 x86_64 GNU/Linux > > [ 1.237600] ------------[ cut here ]------------ > [ 1.237890] WARNING: at arch/x86/kernel/hpet.c:404 hpet_next_event+0x70/0x80() > [ 1.238221] Hardware name: > [ 1.238504] hpet: compare register read back failed. > [ 1.238793] Modules linked in: > [ 1.239315] Pid: 0, comm: swapper Not tainted 2.6.33 #1 > [ 1.239605] Call Trace: > [ 1.239886] [] ? warn_slowpath_common+0x73/0xb0 > [ 1.240409] [] ? tick_dev_program_event+0x38/0xc0 > [ 1.240699] [] ? warn_slowpath_fmt+0x40/0x50 > [ 1.240992] [] ? tick_dev_program_event+0x38/0xc0 > [ 1.241281] [] ? hpet_next_event+0x70/0x80 > [ 1.241573] [] ? tick_dev_program_event+0x38/0xc0 > [ 1.241859] [] ? tick_handle_oneshot_broadcast+0xe2/0x100 > [ 1.246533] [] ? timer_interrupt+0x1a/0x30 > [ 1.246826] [] ? handle_IRQ_event+0x39/0xd0 > [ 1.247118] [] ? handle_edge_irq+0xb8/0x160 > [ 1.247407] [] ? handle_irq+0x15/0x20 > [ 1.247689] [] ? do_IRQ+0x62/0xe0 > [ 1.247976] [] ? ret_from_intr+0x0/0xa > [ 1.248262] [] ? mwait_idle+0x57/0x80 > [ 1.248796] [] ? cpu_idle+0x5c/0xb0 > [ 1.249080] ---[ end trace db7f668fb6fef4e1 ]--- > > Is this something Intel has to fix or is it a bug in the kernel? This is a chipset erratum. Thomas: You mentioned we can retain this check only for known-buggy and hpet debug kind of options. But here is the simple workaround patch for this particular erratum. Some chipsets have a erratum due to which read immediately following a write of HPET comparator returns old comparator value instead of most recently written value. Erratum 15 in "Intel I/O Controller Hub 9 (ICH9) Family Specification Update" (http://www.intel.com/assets/pdf/specupdate/316973.pdf) Workaround for the errata is to read the comparator twice if the first one fails. Signed-off-by: Venkatesh Pallipadi LKML-Reference: <20100225185348.GA9674@linux-os.sc.intel.com> Signed-off-by: H. Peter Anvin Cc: Venkatesh Pallipadi Cc: --- arch/x86/kernel/hpet.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index ee4fa1bfcb33..3d422da92100 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -399,9 +399,15 @@ static int hpet_next_event(unsigned long delta, * then we might have a real hardware problem. We can not do * much about it here, but at least alert the user/admin with * a prominent warning. + * An erratum on some chipsets (ICH9,..), results in comparator read + * immediately following a write returning old value. Workaround + * for this is to read this value second time, when first + * read returns old value. */ - WARN_ONCE(hpet_readl(HPET_Tn_CMP(timer)) != cnt, + if (unlikely((u32)hpet_readl(HPET_Tn_CMP(timer)) != cnt)) { + WARN_ONCE(hpet_readl(HPET_Tn_CMP(timer)) != cnt, KERN_WARNING "hpet: compare register read back failed.\n"); + } return (s32)(hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0; } -- cgit v1.2.3 From b4a5e8a1deca7e61ebaffb37344766b0f0e9f327 Mon Sep 17 00:00:00 2001 From: Alok Kataria Date: Thu, 11 Mar 2010 14:00:16 -0800 Subject: x86, hpet: Fix bug in RTC emulation We think there exists a bug in the HPET code that emulates the RTC. In the normal case, when the RTC frequency is set, the rtc driver tells the hpet code about it here: int hpet_set_periodic_freq(unsigned long freq) { uint64_t clc; if (!is_hpet_enabled()) return 0; if (freq <= DEFAULT_RTC_INT_FREQ) hpet_pie_limit = DEFAULT_RTC_INT_FREQ / freq; else { clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC; do_div(clc, freq); clc >>= hpet_clockevent.shift; hpet_pie_delta = (unsigned long) clc; } return 1; } If freq is set to 64Hz (DEFAULT_RTC_INT_FREQ) or lower, then hpet_pie_limit (a static) is set to non-zero. Then, on every one-shot HPET interrupt, hpet_rtc_timer_reinit is called to compute the next timeout. Well, that function has this logic: if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit) delta = hpet_default_delta; else delta = hpet_pie_delta; Since hpet_pie_limit is not 0, hpet_default_delta is used. That corresponds to 64Hz. Now, if you set a different rtc frequency, you'll take the else path through hpet_set_periodic_freq, but unfortunately no one resets hpet_pie_limit back to 0. Boom....now you are stuck with 64Hz RTC interrupts forever. The patch below just resets the hpet_pie_limit value when requested freq is greater than DEFAULT_RTC_INT_FREQ, which we think fixes this problem. Signed-off-by: Alok N Kataria LKML-Reference: <201003112200.o2BM0Hre012875@imap1.linux-foundation.org> Signed-off-by: Daniel Hecht Cc: Venkatesh Pallipadi Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: H. Peter Anvin --- arch/x86/kernel/hpet.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 3d422da92100..2bda5f0052f7 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -1149,6 +1149,7 @@ int hpet_set_periodic_freq(unsigned long freq) do_div(clc, freq); clc >>= hpet_clockevent.shift; hpet_pie_delta = clc; + hpet_pie_limit = 0; } return 1; } -- cgit v1.2.3 From 042be38e6106ed70b42d096ab4a1ed4187e510e6 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 1 Apr 2010 14:32:43 -0700 Subject: ibft, x86: Change reserve_ibft_region() to find_ibft_region() This allows arch code could decide the way to reserve the ibft. And we should reserve ibft as early as possible, instead of BOOTMEM stage, in case the table is in RAM range and is not reserved by BIOS (this will often be the case.) Move to just after find_smp_config(). Also when CONFIG_NO_BOOTMEM=y, We will not have reserve_bootmem() anymore. -v2: fix typo about ibft pointed by Konrad Rzeszutek Wilk Signed-off-by: Yinghai Lu LKML-Reference: <4BB510FB.80601@kernel.org> Cc: Pekka Enberg Cc: Peter Jones Cc: Konrad Rzeszutek Wilk CC: Jan Beulich Signed-off-by: H. Peter Anvin --- arch/x86/kernel/setup.c | 14 ++++++++++++-- drivers/firmware/iscsi_ibft_find.c | 11 ++++++++--- include/linux/iscsi_ibft.h | 8 ++++++-- 3 files changed, 26 insertions(+), 7 deletions(-) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index d76e18570c60..580e6b3dbdb8 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -608,6 +608,16 @@ static int __init setup_elfcorehdr(char *arg) early_param("elfcorehdr", setup_elfcorehdr); #endif +static __init void reserve_ibft_region(void) +{ + unsigned long addr, size = 0; + + addr = find_ibft_region(&size); + + if (size) + reserve_early_overlap_ok(addr, addr + size, "ibft"); +} + #ifdef CONFIG_X86_RESERVE_LOW_64K static int __init dmi_low_memory_corruption(const struct dmi_system_id *d) { @@ -910,6 +920,8 @@ void __init setup_arch(char **cmdline_p) */ find_smp_config(); + reserve_ibft_region(); + reserve_trampoline_memory(); #ifdef CONFIG_ACPI_SLEEP @@ -977,8 +989,6 @@ void __init setup_arch(char **cmdline_p) dma32_reserve_bootmem(); - reserve_ibft_region(); - #ifdef CONFIG_KVM_CLOCK kvmclock_init(); #endif diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c index dfb15c06c88f..8f5d9e258829 100644 --- a/drivers/firmware/iscsi_ibft_find.c +++ b/drivers/firmware/iscsi_ibft_find.c @@ -52,7 +52,7 @@ EXPORT_SYMBOL_GPL(ibft_addr); * Routine used to find the iSCSI Boot Format Table. The logical * kernel address is set in the ibft_addr global variable. */ -void __init reserve_ibft_region(void) +unsigned long __init find_ibft_region(unsigned long *sizep) { unsigned long pos; unsigned int len = 0; @@ -78,6 +78,11 @@ void __init reserve_ibft_region(void) } } } - if (ibft_addr) - reserve_bootmem(pos, PAGE_ALIGN(len), BOOTMEM_DEFAULT); + if (ibft_addr) { + *sizep = PAGE_ALIGN(len); + return pos; + } + + *sizep = 0; + return 0; } diff --git a/include/linux/iscsi_ibft.h b/include/linux/iscsi_ibft.h index 6092487e2950..d2e4042f8f5e 100644 --- a/include/linux/iscsi_ibft.h +++ b/include/linux/iscsi_ibft.h @@ -42,9 +42,13 @@ extern struct ibft_table_header *ibft_addr; * mapped address is set in the ibft_addr variable. */ #ifdef CONFIG_ISCSI_IBFT_FIND -extern void __init reserve_ibft_region(void); +unsigned long find_ibft_region(unsigned long *sizep); #else -static inline void reserve_ibft_region(void) { } +static inline unsigned long find_ibft_region(unsigned long *sizep) +{ + *sizep = 0; + return 0; +} #endif #endif /* ISCSI_IBFT_H */ -- cgit v1.2.3 From 51591e31dcb3716f03f962e26ec36a029aa46340 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Thu, 25 Mar 2010 15:39:27 -0700 Subject: x86: Increase CONFIG_NODES_SHIFT max to 10 Some larger systems require more than 512 nodes, so increase the maximum CONFIG_NODES_SHIFT to 10 for a new max of 1024 nodes. This was tested with numa=fake=64M on systems with more than 64GB of RAM. A total of 1022 nodes were initialized. Successfully builds with no additional warnings on x86_64 allyesconfig. ( No effect on any existing config. Newly enabled CONFIG_MAXSMP=y will see the new default. ) Signed-off-by: David Rientjes LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 0eacb1ffb421..9458685902bd 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1216,8 +1216,8 @@ config NUMA_EMU config NODES_SHIFT int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP - range 1 9 - default "9" if MAXSMP + range 1 10 + default "10" if MAXSMP default "6" if X86_64 default "4" if X86_NUMAQ default "3" -- cgit v1.2.3 From 472a474c6630efd195d3738339fd1bdc8aa3b1aa Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Wed, 31 Mar 2010 18:04:47 -0700 Subject: x86: Fix double enable_IR_x2apic() call on SMP kernel on !SMP boards Jan Grossmann reported kernel boot panic while booting SMP kernel on his system with a single core cpu. SMP kernels call enable_IR_x2apic() from native_smp_prepare_cpus() and on platforms where the kernel doesn't find SMP configuration we ended up again calling enable_IR_x2apic() from the APIC_init_uniprocessor() call in the smp_sanity_check(). Thus leading to kernel panic. Don't call enable_IR_x2apic() and default_setup_apic_routing() from APIC_init_uniprocessor() in CONFIG_SMP case. NOTE: this kind of non-idempotent and assymetric initialization sequence is rather fragile and unclean, we'll clean that up in v2.6.35. This is the minimal fix for v2.6.34. Reported-by: Jan.Grossmann@kielnet.net Signed-off-by: Suresh Siddha Cc: Cc: Cc: Cc: Cc: Cc: # [v2.6.32.x, v2.6.33.x] LKML-Reference: <1270083887.7835.78.camel@sbs-t61.sc.intel.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/apic.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 00187f1fcfb7..e5a4a1e01618 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1640,8 +1640,10 @@ int __init APIC_init_uniprocessor(void) } #endif +#ifndef CONFIG_SMP enable_IR_x2apic(); default_setup_apic_routing(); +#endif verify_local_APIC(); connect_bsp_APIC(); -- cgit v1.2.3