From dedfde2fe1c4ccf27179fcb234e2112d065c39bb Mon Sep 17 00:00:00 2001 From: Petr Machata Date: Wed, 17 Jul 2019 23:29:07 +0300 Subject: mlxsw: spectrum_dcb: Configure DSCP map as the last rule is removed Spectrum systems use DSCP rewrite map to update DSCP field in egressing packets to correspond to priority that the packet has. Whether rewriting will take place is determined at the point when the packet ingresses the switch: if the port is in Trust L3 mode, packet priority is determined from the DSCP map at the port, and DSCP rewrite will happen. If the port is in Trust L2 mode, 802.1p is used for packet prioritization, and no DSCP rewrite will happen. The driver determines the port trust mode based on whether any DSCP prioritization rules are in effect at given port. If there are any, trust level is L3, otherwise it's L2. When the last DSCP rule is removed, the port is switched to trust L2. Under that scenario, if DSCP of a packet should be rewritten, it should be rewritten to 0. However, when switching to Trust L2, the driver neglects to also update the DSCP rewrite map. The last DSCP rule thus remains in effect, and packets egressing through this port, if they have the right priority, will have their DSCP set according to this rule. Fix by first configuring the rewrite map, and only then switching to trust L2 and bailing out. Fixes: b2b1dab6884e ("mlxsw: spectrum: Support ieee_setapp, ieee_delapp") Signed-off-by: Petr Machata Reported-by: Alex Veber Tested-by: Alex Veber Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c index b25048c6c761..21296fa7f7fb 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c @@ -408,14 +408,6 @@ static int mlxsw_sp_port_dcb_app_update(struct mlxsw_sp_port *mlxsw_sp_port) have_dscp = mlxsw_sp_port_dcb_app_prio_dscp_map(mlxsw_sp_port, &prio_map); - if (!have_dscp) { - err = mlxsw_sp_port_dcb_toggle_trust(mlxsw_sp_port, - MLXSW_REG_QPTS_TRUST_STATE_PCP); - if (err) - netdev_err(mlxsw_sp_port->dev, "Couldn't switch to trust L2\n"); - return err; - } - mlxsw_sp_port_dcb_app_dscp_prio_map(mlxsw_sp_port, default_prio, &dscp_map); err = mlxsw_sp_port_dcb_app_update_qpdpm(mlxsw_sp_port, @@ -432,6 +424,14 @@ static int mlxsw_sp_port_dcb_app_update(struct mlxsw_sp_port *mlxsw_sp_port) return err; } + if (!have_dscp) { + err = mlxsw_sp_port_dcb_toggle_trust(mlxsw_sp_port, + MLXSW_REG_QPTS_TRUST_STATE_PCP); + if (err) + netdev_err(mlxsw_sp_port->dev, "Couldn't switch to trust L2\n"); + return err; + } + err = mlxsw_sp_port_dcb_toggle_trust(mlxsw_sp_port, MLXSW_REG_QPTS_TRUST_STATE_DSCP); if (err) { -- cgit v1.2.3 From 577fa14d210073ba1ce6237c659a8820312104ad Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Wed, 17 Jul 2019 23:29:08 +0300 Subject: mlxsw: spectrum: Do not process learned records with a dummy FID The switch periodically sends notifications about learned FDB entries. Among other things, the notification includes the FID (Filtering Identifier) and the port on which the MAC was learned. In case the driver does not have the FID defined on the relevant port, the following error will be periodically generated: mlxsw_spectrum2 0000:06:00.0 swp32: Failed to find a matching {Port, VID} following FDB notification This is not supposed to happen under normal conditions, but can happen if an ingress tc filter with a redirect action is installed on a bridged port. The redirect action will cause the packet's FID to be changed to the dummy FID and a learning notification will be emitted with this FID - which is not defined on the bridged port. Fix this by having the driver ignore learning notifications generated with the dummy FID and delete them from the device. Another option is to chain an ignore action after the redirect action which will cause the device to disable learning, but this means that we need to consume another action whenever a redirect action is used. In addition, the scenario described above is merely a corner case. Fixes: cedbb8b25948 ("mlxsw: spectrum_flower: Set dummy FID before forward action") Signed-off-by: Ido Schimmel Reported-by: Alex Kushnarov Acked-by: Jiri Pirko Tested-by: Alex Kushnarov Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.h | 1 + drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c | 10 ++++++++++ drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 6 ++++++ 3 files changed, 17 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h index a252b080dda9..131f62ce9297 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h @@ -830,6 +830,7 @@ int mlxsw_sp_setup_tc_prio(struct mlxsw_sp_port *mlxsw_sp_port, struct tc_prio_qopt_offload *p); /* spectrum_fid.c */ +bool mlxsw_sp_fid_is_dummy(struct mlxsw_sp *mlxsw_sp, u16 fid_index); bool mlxsw_sp_fid_lag_vid_valid(const struct mlxsw_sp_fid *fid); struct mlxsw_sp_fid *mlxsw_sp_fid_lookup_by_index(struct mlxsw_sp *mlxsw_sp, u16 fid_index); diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c index 46baf3b44309..8df3cb21baa6 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c @@ -126,6 +126,16 @@ static const int *mlxsw_sp_packet_type_sfgc_types[] = { [MLXSW_SP_FLOOD_TYPE_MC] = mlxsw_sp_sfgc_mc_packet_types, }; +bool mlxsw_sp_fid_is_dummy(struct mlxsw_sp *mlxsw_sp, u16 fid_index) +{ + enum mlxsw_sp_fid_type fid_type = MLXSW_SP_FID_TYPE_DUMMY; + struct mlxsw_sp_fid_family *fid_family; + + fid_family = mlxsw_sp->fid_core->fid_family_arr[fid_type]; + + return fid_family->start_index == fid_index; +} + bool mlxsw_sp_fid_lag_vid_valid(const struct mlxsw_sp_fid *fid) { return fid->fid_family->lag_vid_valid; diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c index 50111f228d77..5ecb45118400 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c @@ -2468,6 +2468,9 @@ static void mlxsw_sp_fdb_notify_mac_process(struct mlxsw_sp *mlxsw_sp, goto just_remove; } + if (mlxsw_sp_fid_is_dummy(mlxsw_sp, fid)) + goto just_remove; + mlxsw_sp_port_vlan = mlxsw_sp_port_vlan_find_by_fid(mlxsw_sp_port, fid); if (!mlxsw_sp_port_vlan) { netdev_err(mlxsw_sp_port->dev, "Failed to find a matching {Port, VID} following FDB notification\n"); @@ -2527,6 +2530,9 @@ static void mlxsw_sp_fdb_notify_mac_lag_process(struct mlxsw_sp *mlxsw_sp, goto just_remove; } + if (mlxsw_sp_fid_is_dummy(mlxsw_sp, fid)) + goto just_remove; + mlxsw_sp_port_vlan = mlxsw_sp_port_vlan_find_by_fid(mlxsw_sp_port, fid); if (!mlxsw_sp_port_vlan) { netdev_err(mlxsw_sp_port->dev, "Failed to find a matching {Port, VID} following FDB notification\n"); -- cgit v1.2.3