From 6eda541d12116b4772baa09d3e8d7b0389df4289 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 8 Jun 2012 14:32:50 +0200 Subject: Bluetooth: Support AR3011 in Acer Iconia Tab W500 Acer used this chip connected via USB: Bus 005 Device 005: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 224 Wireless bDeviceSubClass 1 Radio Frequency bDeviceProtocol 1 Bluetooth bMaxPacketSize0 64 idVendor 0x0cf3 Atheros Communications, Inc. idProduct 0x3005 AR3011 Bluetooth bcdDevice 0.01 iManufacturer 0 iProduct 0 iSerial 0 bNumConfigurations 1 Signed-off-by: Marek Vasut Cc: Gustavo Padovan Cc: Johan Hedberg Cc: Marcel Holtmann Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 1 + drivers/bluetooth/btusb.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index ad591bd240ec..f0f62021227f 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -63,6 +63,7 @@ static struct usb_device_id ath3k_table[] = { /* Atheros AR3011 with sflash firmware*/ { USB_DEVICE(0x0CF3, 0x3002) }, + { USB_DEVICE(0x0CF3, 0xE019) }, { USB_DEVICE(0x13d3, 0x3304) }, { USB_DEVICE(0x0930, 0x0215) }, { USB_DEVICE(0x0489, 0xE03D) }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index c9463af8e564..ff3eabc45ff5 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -125,6 +125,7 @@ static struct usb_device_id blacklist_table[] = { /* Atheros 3011 with sflash firmware */ { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE }, + { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE }, -- cgit v1.2.3 From 8f321f853ea33330c7141977cd34804476e2e07e Mon Sep 17 00:00:00 2001 From: Szymon Janc Date: Fri, 8 Jun 2012 11:33:33 +0200 Subject: Bluetooth: Fix using uninitialized option in RFCMode If remote device sends bogus RFC option with invalid length, undefined options values are used. Fix this by using defaults when remote misbehaves. This also fixes the following warning reported by gcc 4.7.0: net/bluetooth/l2cap_core.c: In function 'l2cap_config_rsp': net/bluetooth/l2cap_core.c:3302:13: warning: 'rfc.max_pdu_size' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/l2cap_core.c:3266:24: note: 'rfc.max_pdu_size' was declared here net/bluetooth/l2cap_core.c:3298:25: warning: 'rfc.monitor_timeout' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/l2cap_core.c:3266:24: note: 'rfc.monitor_timeout' was declared here net/bluetooth/l2cap_core.c:3297:25: warning: 'rfc.retrans_timeout' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/l2cap_core.c:3266:24: note: 'rfc.retrans_timeout' was declared here net/bluetooth/l2cap_core.c:3295:2: warning: 'rfc.mode' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/l2cap_core.c:3266:24: note: 'rfc.mode' was declared here Signed-off-by: Szymon Janc Signed-off-by: Gustavo Padovan --- net/bluetooth/l2cap_core.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 8394e3615ef6..4554e80d16a3 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -2915,12 +2915,14 @@ static void l2cap_conf_rfc_get(struct l2cap_chan *chan, void *rsp, int len) while (len >= L2CAP_CONF_OPT_SIZE) { len -= l2cap_get_conf_opt(&rsp, &type, &olen, &val); - switch (type) { - case L2CAP_CONF_RFC: - if (olen == sizeof(rfc)) - memcpy(&rfc, (void *)val, olen); - goto done; - } + if (type != L2CAP_CONF_RFC) + continue; + + if (olen != sizeof(rfc)) + break; + + memcpy(&rfc, (void *)val, olen); + goto done; } /* Use sane default values in case a misbehaving remote device -- cgit v1.2.3 From 6c4ae5c2e7bfbb7d10d73611f69ac8a8609d84fd Mon Sep 17 00:00:00 2001 From: Giancarlo Formicuccia Date: Sun, 10 Jun 2012 08:33:11 +0200 Subject: Bluetooth: add support for atheros 0930:0219 Add support for the AR3012 chip found on the Toshiba Sallite M840-1000-XQ. usb-devices shows: T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0930 ProdID=0219 Rev=00.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Giancarlo Formicuccia Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index f0f62021227f..10308cd8a7ed 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -78,6 +78,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x04CA, 0x3005) }, { USB_DEVICE(0x13d3, 0x3362) }, { USB_DEVICE(0x0CF3, 0xE004) }, + { USB_DEVICE(0x0930, 0x0219) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -102,6 +103,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index ff3eabc45ff5..83ebb241bfcc 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -140,6 +140,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, -- cgit v1.2.3 From f960727e6c98a36018029c0512aa03f1c5faa914 Mon Sep 17 00:00:00 2001 From: Vishal Agarwal Date: Wed, 13 Jun 2012 05:32:43 +0530 Subject: Bluetooth: Fix sending HCI_Disconnect only when connected HCI_Disconnect should only be sent after connection is established. If connection is not yet established and HCI_Disconnect is called then disconnection complete will be received with a handle which does not exist and hence this event will be ignored. But as mgmt.c will not receive this event, its variable for pending command is not cleared.This will result in future Disconnect commands for that BD Address to be blocked with error busy. Signed-off-by: Vishal Agarwal Acked-by: Johan Hedberg Signed-off-by: Gustavo Padovan --- net/bluetooth/mgmt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 991d5b667674..3e5e3362ea00 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -1598,7 +1598,7 @@ static int disconnect(struct sock *sk, struct hci_dev *hdev, void *data, else conn = hci_conn_hash_lookup_ba(hdev, LE_LINK, &cp->addr.bdaddr); - if (!conn) { + if (!conn || conn->state == BT_OPEN || conn->state == BT_CLOSED) { err = cmd_status(sk, hdev->id, MGMT_OP_DISCONNECT, MGMT_STATUS_NOT_CONNECTED); goto failed; -- cgit v1.2.3 From 50a2984543aa2581d08580f8468533ce0ade8a62 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sat, 16 Jun 2012 20:27:14 +0000 Subject: bnx2x: fix I2C non-respondent issue When I2C is not responding it's usually due to a previous unexpected reset during I2C operation. We release it by powering down and up the SFP+ module. Signed-off-by: Yaniv Rosner Signed-off-by: Yuval Mintz Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 52 +++++++++++++----------- 1 file changed, 29 insertions(+), 23 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index a3fb7215cd89..51d7ab6a0276 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -40,6 +40,7 @@ #define I2C_BSC0 0 #define I2C_BSC1 1 #define I2C_WA_RETRY_CNT 3 +#define I2C_WA_PWR_ITER (I2C_WA_RETRY_CNT - 1) #define MCPR_IMC_COMMAND_READ_OP 1 #define MCPR_IMC_COMMAND_WRITE_OP 2 @@ -7659,6 +7660,28 @@ static int bnx2x_8726_read_sfp_module_eeprom(struct bnx2x_phy *phy, return -EINVAL; } +static void bnx2x_warpcore_power_module(struct link_params *params, + struct bnx2x_phy *phy, + u8 power) +{ + u32 pin_cfg; + struct bnx2x *bp = params->bp; + + pin_cfg = (REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port].e3_sfp_ctrl)) & + PORT_HW_CFG_E3_PWR_DIS_MASK) >> + PORT_HW_CFG_E3_PWR_DIS_SHIFT; + + if (pin_cfg == PIN_CFG_NA) + return; + DP(NETIF_MSG_LINK, "Setting SFP+ module power to %d using pin cfg %d\n", + power, pin_cfg); + /* Low ==> corresponding SFP+ module is powered + * high ==> the SFP+ module is powered down + */ + bnx2x_set_cfg_pin(bp, pin_cfg, power ^ 1); +} static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy, struct link_params *params, u16 addr, u8 byte_cnt, @@ -7678,6 +7701,12 @@ static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy, /* 4 byte aligned address */ addr32 = addr & (~0x3); do { + if (cnt == I2C_WA_PWR_ITER) { + bnx2x_warpcore_power_module(params, phy, 0); + /* Note that 100us are not enough here */ + usleep_range(1000,1000); + bnx2x_warpcore_power_module(params, phy, 1); + } rc = bnx2x_bsc_read(params, phy, 0xa0, addr32, 0, byte_cnt, data_array); } while ((rc != 0) && (++cnt < I2C_WA_RETRY_CNT)); @@ -8200,29 +8229,6 @@ static void bnx2x_set_sfp_module_fault_led(struct link_params *params, bnx2x_set_e1e2_module_fault_led(params, gpio_mode); } -static void bnx2x_warpcore_power_module(struct link_params *params, - struct bnx2x_phy *phy, - u8 power) -{ - u32 pin_cfg; - struct bnx2x *bp = params->bp; - - pin_cfg = (REG_RD(bp, params->shmem_base + - offsetof(struct shmem_region, - dev_info.port_hw_config[params->port].e3_sfp_ctrl)) & - PORT_HW_CFG_E3_PWR_DIS_MASK) >> - PORT_HW_CFG_E3_PWR_DIS_SHIFT; - - if (pin_cfg == PIN_CFG_NA) - return; - DP(NETIF_MSG_LINK, "Setting SFP+ module power to %d using pin cfg %d\n", - power, pin_cfg); - /* Low ==> corresponding SFP+ module is powered - * high ==> the SFP+ module is powered down - */ - bnx2x_set_cfg_pin(bp, pin_cfg, power ^ 1); -} - static void bnx2x_warpcore_hw_reset(struct bnx2x_phy *phy, struct link_params *params) { -- cgit v1.2.3 From 5481388bc705de27ca37241a42c6612c86f2cc3b Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sat, 16 Jun 2012 20:27:15 +0000 Subject: bnx2x: fix link for BCM57711 with 84823 phy Signed-off-by: Yaniv Rosner Signed-off-by: Yuval Mintz Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 51d7ab6a0276..6e7d5c0843b4 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -9754,7 +9754,7 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy, msleep(1); - if (!(CHIP_IS_E1(bp))) + if (!(CHIP_IS_E1x(bp))) port = BP_PATH(bp); else port = params->port; -- cgit v1.2.3 From b6138ed60457ef1e9150692f6790eb4a2a696308 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Sat, 16 Jun 2012 23:29:00 +0000 Subject: ixgbe: Fix PHC loophole allowing misconfiguration of increment register This patch fixes a potential hole when configuring the cycle counter used to generate the nanosecond time clock. This clock is based off of the SYSTIME registers along with the TIMINCA registers. The TIMINCA register determines the increment to be added to the SYSTIME registers every DMA clock tick. This register needs to be reconfigured whenever the link-speed changes. However, the value calculated stays the same when link is down and when link is up. Misconfiguration can occur if the link status changes due to a reset, which causes the TIMINCA register to be reset. This reset puts the device in an unstable state where the SYSTIME registers stop incrementing and the PTP protocol does not function. The solution is to double check the TIMINCA value and always reset the value if the register is zero. This prevents a misconfiguration bug that halts the PHC. Signed-off-by: Jacob Keller Acked-by: Don Skidmore Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index ddc6a4d19302..dcebd128becf 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -708,6 +708,7 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter) { struct ixgbe_hw *hw = &adapter->hw; u32 incval = 0; + u32 timinca = 0; u32 shift = 0; u32 cycle_speed; unsigned long flags; @@ -730,8 +731,16 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter) break; } - /* Bail if the cycle speed didn't change */ - if (adapter->cycle_speed == cycle_speed) + /* + * grab the current TIMINCA value from the register so that it can be + * double checked. If the register value has been cleared, it must be + * reset to the correct value for generating a cyclecounter. If + * TIMINCA is zero, the SYSTIME registers do not increment at all. + */ + timinca = IXGBE_READ_REG(hw, IXGBE_TIMINCA); + + /* Bail if the cycle speed didn't change and TIMINCA is non-zero */ + if (adapter->cycle_speed == cycle_speed && timinca) return; /* disable the SDP clock out */ -- cgit v1.2.3 From b7e5887e0e414bde0a2f311ae3fbea5611562e29 Mon Sep 17 00:00:00 2001 From: Sarveshwar Bandi Date: Wed, 13 Jun 2012 19:51:43 +0000 Subject: be2net: reduce gso_max_size setting to account for ethernet header. The maximum size of packet that can be handled by controller including ethernet header is 65535. Reducing gso_max_size accordingly. Signed-off-by: Sarveshwar Bandi Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index fdb50cec6b51..501dfa9c88ec 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -3237,7 +3237,7 @@ static void be_netdev_init(struct net_device *netdev) netdev->flags |= IFF_MULTICAST; - netif_set_gso_max_size(netdev, 65535); + netif_set_gso_max_size(netdev, 65535 - ETH_HLEN); netdev->netdev_ops = &be_netdev_ops; -- cgit v1.2.3 From 97f1d8cd8d61642d01af1fc181f3103314128c3b Mon Sep 17 00:00:00 2001 From: Vasundhara Volam Date: Wed, 13 Jun 2012 19:51:44 +0000 Subject: be2net: Modify error message to incorporate subsystem Modify IOCTL error message to print subsystem also. Signed-off-by: Vasundhara Volam Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_cmds.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index 8d06ea381741..921c2082af4c 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -122,15 +122,15 @@ static int be_mcc_compl_process(struct be_adapter *adapter, goto done; if (compl_status == MCC_STATUS_UNAUTHORIZED_REQUEST) { - dev_warn(&adapter->pdev->dev, "This domain(VM) is not " - "permitted to execute this cmd (opcode %d)\n", - opcode); + dev_warn(&adapter->pdev->dev, + "opcode %d-%d is not permitted\n", + opcode, subsystem); } else { extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) & CQE_STATUS_EXTD_MASK; - dev_err(&adapter->pdev->dev, "Cmd (opcode %d) failed:" - "status %d, extd-status %d\n", - opcode, compl_status, extd_status); + dev_err(&adapter->pdev->dev, + "opcode %d-%d failed:status %d-%d\n", + opcode, subsystem, compl_status, extd_status); } } done: -- cgit v1.2.3 From 0b3f0e7ae0765c81c7d659811595ea5058ae05a7 Mon Sep 17 00:00:00 2001 From: Vasundhara Volam Date: Wed, 13 Jun 2012 19:51:45 +0000 Subject: be2net: Increase statistics structure size for skyhawk. Increasing the hardware statistics structure to accomodate statistics for skyhawk. Signed-off-by: Vasundhara Volam Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_cmds.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h index 9625bf420c16..b3f3fc3d1323 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.h +++ b/drivers/net/ethernet/emulex/benet/be_cmds.h @@ -1566,7 +1566,7 @@ struct be_hw_stats_v1 { u32 rsvd0[BE_TXP_SW_SZ]; struct be_erx_stats_v1 erx; struct be_pmem_stats pmem; - u32 rsvd1[3]; + u32 rsvd1[18]; }; struct be_cmd_req_get_stats_v1 { -- cgit v1.2.3 From 86a2f415e6cdc5dbb2163b31abf4d36f26f7e3da Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Thu, 14 Jun 2012 01:18:42 +0000 Subject: usbnet: sanitise overlong driver information strings As seen on smsc75xx, driver_info->description being longer than 32 characters messes up 'ethtool -i' output. Signed-off-by: Phil Sutter Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 9f58330f1312..d4f7256a607d 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -876,9 +876,9 @@ void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info) { struct usbnet *dev = netdev_priv(net); - strncpy (info->driver, dev->driver_name, sizeof info->driver); - strncpy (info->version, DRIVER_VERSION, sizeof info->version); - strncpy (info->fw_version, dev->driver_info->description, + strlcpy (info->driver, dev->driver_name, sizeof info->driver); + strlcpy (info->version, DRIVER_VERSION, sizeof info->version); + strlcpy (info->fw_version, dev->driver_info->description, sizeof info->fw_version); usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info); } -- cgit v1.2.3 From df2bcc4af2616b18efeaa3d044fe15ce891c5d21 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Thu, 14 Jun 2012 22:39:27 +0000 Subject: bonding: show all the link status of slaves There are four link statuses of a bonding slave, the procfs code shows a wrong status when using downdelay/updelay: (slave->link == BOND_LINK_UP) ? "up" : "down" It doesn't respect the rest two statuses. This patch fixes it. Cc: Jay Vosburgh Cc: Andy Gospodarek Cc: "David S. Miller" Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- drivers/net/bonding/bond_procfs.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/net/bonding/bond_procfs.c b/drivers/net/bonding/bond_procfs.c index ad284baafe87..3cea38d37344 100644 --- a/drivers/net/bonding/bond_procfs.c +++ b/drivers/net/bonding/bond_procfs.c @@ -150,14 +150,25 @@ static void bond_info_show_master(struct seq_file *seq) } } +static const char *bond_slave_link_status(s8 link) +{ + static const char * const status[] = { + [BOND_LINK_UP] = "up", + [BOND_LINK_FAIL] = "going down", + [BOND_LINK_DOWN] = "down", + [BOND_LINK_BACK] = "going back", + }; + + return status[link]; +} + static void bond_info_show_slave(struct seq_file *seq, const struct slave *slave) { struct bonding *bond = seq->private; seq_printf(seq, "\nSlave Interface: %s\n", slave->dev->name); - seq_printf(seq, "MII Status: %s\n", - (slave->link == BOND_LINK_UP) ? "up" : "down"); + seq_printf(seq, "MII Status: %s\n", bond_slave_link_status(slave->link)); if (slave->speed == SPEED_UNKNOWN) seq_printf(seq, "Speed: %s\n", "Unknown"); else -- cgit v1.2.3 From 31fdc5553b42abd7e29bb7b89f6ba07514eb4763 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?R=C3=A9mi=20Denis-Courmont?= Date: Wed, 13 Jun 2012 22:29:03 +0000 Subject: net: remove my future former mail address MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rémi Denis-Courmont Cc: Sakari Ailus Signed-off-by: David S. Miller --- include/net/phonet/gprs.h | 2 +- net/caif/caif_dev.c | 3 +-- net/phonet/af_phonet.c | 4 ++-- net/phonet/datagram.c | 4 ++-- net/phonet/pep-gprs.c | 2 +- net/phonet/pep.c | 2 +- net/phonet/pn_dev.c | 4 ++-- net/phonet/pn_netlink.c | 4 ++-- net/phonet/socket.c | 4 ++-- net/phonet/sysctl.c | 2 +- 10 files changed, 15 insertions(+), 16 deletions(-) diff --git a/include/net/phonet/gprs.h b/include/net/phonet/gprs.h index 928daf595beb..bcd525e39a0b 100644 --- a/include/net/phonet/gprs.h +++ b/include/net/phonet/gprs.h @@ -5,7 +5,7 @@ * * Copyright (C) 2008 Nokia Corporation. * - * Author: Rémi Denis-Courmont + * Author: Rémi Denis-Courmont * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/net/caif/caif_dev.c b/net/caif/caif_dev.c index aa6f716524fd..554b31289607 100644 --- a/net/caif/caif_dev.c +++ b/net/caif/caif_dev.c @@ -4,8 +4,7 @@ * Author: Sjur Brendeland/sjur.brandeland@stericsson.com * License terms: GNU General Public License (GPL) version 2 * - * Borrowed heavily from file: pn_dev.c. Thanks to - * Remi Denis-Courmont + * Borrowed heavily from file: pn_dev.c. Thanks to Remi Denis-Courmont * and Sakari Ailus */ diff --git a/net/phonet/af_phonet.c b/net/phonet/af_phonet.c index 779ce4ff92ec..5a940dbd74a3 100644 --- a/net/phonet/af_phonet.c +++ b/net/phonet/af_phonet.c @@ -5,8 +5,8 @@ * * Copyright (C) 2008 Nokia Corporation. * - * Contact: Remi Denis-Courmont - * Original author: Sakari Ailus + * Authors: Sakari Ailus + * Rémi Denis-Courmont * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/net/phonet/datagram.c b/net/phonet/datagram.c index bf35b4e1a14c..12c30f3e643e 100644 --- a/net/phonet/datagram.c +++ b/net/phonet/datagram.c @@ -5,8 +5,8 @@ * * Copyright (C) 2008 Nokia Corporation. * - * Contact: Remi Denis-Courmont - * Original author: Sakari Ailus + * Authors: Sakari Ailus + * Rémi Denis-Courmont * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/net/phonet/pep-gprs.c b/net/phonet/pep-gprs.c index d01208968c83..a2fba7edfd1f 100644 --- a/net/phonet/pep-gprs.c +++ b/net/phonet/pep-gprs.c @@ -5,7 +5,7 @@ * * Copyright (C) 2008 Nokia Corporation. * - * Author: Rémi Denis-Courmont + * Author: Rémi Denis-Courmont * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/net/phonet/pep.c b/net/phonet/pep.c index 9dd4f926f7d1..576f22c9c76e 100644 --- a/net/phonet/pep.c +++ b/net/phonet/pep.c @@ -5,7 +5,7 @@ * * Copyright (C) 2008 Nokia Corporation. * - * Author: Rémi Denis-Courmont + * Author: Rémi Denis-Courmont * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/net/phonet/pn_dev.c b/net/phonet/pn_dev.c index 36f75a9e2c3d..5bf6341e2dd4 100644 --- a/net/phonet/pn_dev.c +++ b/net/phonet/pn_dev.c @@ -5,8 +5,8 @@ * * Copyright (C) 2008 Nokia Corporation. * - * Contact: Remi Denis-Courmont - * Original author: Sakari Ailus + * Authors: Sakari Ailus + * Rémi Denis-Courmont * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/net/phonet/pn_netlink.c b/net/phonet/pn_netlink.c index cfdf135fcd69..7dd762a464e5 100644 --- a/net/phonet/pn_netlink.c +++ b/net/phonet/pn_netlink.c @@ -5,8 +5,8 @@ * * Copyright (C) 2008 Nokia Corporation. * - * Contact: Remi Denis-Courmont - * Original author: Sakari Ailus + * Authors: Sakari Ailus + * Remi Denis-Courmont * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/net/phonet/socket.c b/net/phonet/socket.c index 89cfa9ce4939..0acc943f713a 100644 --- a/net/phonet/socket.c +++ b/net/phonet/socket.c @@ -5,8 +5,8 @@ * * Copyright (C) 2008 Nokia Corporation. * - * Contact: Remi Denis-Courmont - * Original author: Sakari Ailus + * Authors: Sakari Ailus + * Rémi Denis-Courmont * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/net/phonet/sysctl.c b/net/phonet/sysctl.c index 696348fd31a1..d6bbbbd0af18 100644 --- a/net/phonet/sysctl.c +++ b/net/phonet/sysctl.c @@ -5,7 +5,7 @@ * * Copyright (C) 2008 Nokia Corporation. * - * Contact: Remi Denis-Courmont + * Author: Rémi Denis-Courmont * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License -- cgit v1.2.3 From d189634ecab947c10f6f832258b103d0bbfe73cc Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Mon, 18 Jun 2012 12:08:33 +0000 Subject: ipv6: Move ipv6 proc file registration to end of init order /proc/net/ipv6_route reflects the contents of fib_table_hash. The proc handler is installed in ip6_route_net_init() whereas fib_table_hash is allocated in fib6_net_init() _after_ the proc handler has been installed. This opens up a short time frame to access fib_table_hash with its pants down. Move the registration of the proc files to a later point in the init order to avoid the race. Tested :-) Signed-off-by: Thomas Graf Signed-off-by: David S. Miller --- net/ipv6/route.c | 41 +++++++++++++++++++++++++++++++---------- 1 file changed, 31 insertions(+), 10 deletions(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 999a982ad3fd..becb048d18d4 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -2957,10 +2957,6 @@ static int __net_init ip6_route_net_init(struct net *net) net->ipv6.sysctl.ip6_rt_mtu_expires = 10*60*HZ; net->ipv6.sysctl.ip6_rt_min_advmss = IPV6_MIN_MTU - 20 - 40; -#ifdef CONFIG_PROC_FS - proc_net_fops_create(net, "ipv6_route", 0, &ipv6_route_proc_fops); - proc_net_fops_create(net, "rt6_stats", S_IRUGO, &rt6_stats_seq_fops); -#endif net->ipv6.ip6_rt_gc_expire = 30*HZ; ret = 0; @@ -2981,10 +2977,6 @@ out_ip6_dst_ops: static void __net_exit ip6_route_net_exit(struct net *net) { -#ifdef CONFIG_PROC_FS - proc_net_remove(net, "ipv6_route"); - proc_net_remove(net, "rt6_stats"); -#endif kfree(net->ipv6.ip6_null_entry); #ifdef CONFIG_IPV6_MULTIPLE_TABLES kfree(net->ipv6.ip6_prohibit_entry); @@ -2993,11 +2985,33 @@ static void __net_exit ip6_route_net_exit(struct net *net) dst_entries_destroy(&net->ipv6.ip6_dst_ops); } +static int __net_init ip6_route_net_init_late(struct net *net) +{ +#ifdef CONFIG_PROC_FS + proc_net_fops_create(net, "ipv6_route", 0, &ipv6_route_proc_fops); + proc_net_fops_create(net, "rt6_stats", S_IRUGO, &rt6_stats_seq_fops); +#endif + return 0; +} + +static void __net_exit ip6_route_net_exit_late(struct net *net) +{ +#ifdef CONFIG_PROC_FS + proc_net_remove(net, "ipv6_route"); + proc_net_remove(net, "rt6_stats"); +#endif +} + static struct pernet_operations ip6_route_net_ops = { .init = ip6_route_net_init, .exit = ip6_route_net_exit, }; +static struct pernet_operations ip6_route_net_late_ops = { + .init = ip6_route_net_init_late, + .exit = ip6_route_net_exit_late, +}; + static struct notifier_block ip6_route_dev_notifier = { .notifier_call = ip6_route_dev_notify, .priority = 0, @@ -3047,19 +3061,25 @@ int __init ip6_route_init(void) if (ret) goto xfrm6_init; + ret = register_pernet_subsys(&ip6_route_net_late_ops); + if (ret) + goto fib6_rules_init; + ret = -ENOBUFS; if (__rtnl_register(PF_INET6, RTM_NEWROUTE, inet6_rtm_newroute, NULL, NULL) || __rtnl_register(PF_INET6, RTM_DELROUTE, inet6_rtm_delroute, NULL, NULL) || __rtnl_register(PF_INET6, RTM_GETROUTE, inet6_rtm_getroute, NULL, NULL)) - goto fib6_rules_init; + goto out_register_late_subsys; ret = register_netdevice_notifier(&ip6_route_dev_notifier); if (ret) - goto fib6_rules_init; + goto out_register_late_subsys; out: return ret; +out_register_late_subsys: + unregister_pernet_subsys(&ip6_route_net_late_ops); fib6_rules_init: fib6_rules_cleanup(); xfrm6_init: @@ -3078,6 +3098,7 @@ out_kmem_cache: void ip6_route_cleanup(void) { unregister_netdevice_notifier(&ip6_route_dev_notifier); + unregister_pernet_subsys(&ip6_route_net_late_ops); fib6_rules_cleanup(); xfrm6_fini(); fib6_gc_cleanup(); -- cgit v1.2.3 From ea1e76a3f92f8565d395c549b9ca836c7eaa44b9 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Wed, 13 Jun 2012 13:35:44 +0300 Subject: Bluetooth: btmrvl: Do not send vendor events to bluetooth stack Vendor-specific events shall be processed in driver and not sent to bluetooth stack where they screw up HCI command countings. Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan --- drivers/bluetooth/btmrvl_drv.h | 2 +- drivers/bluetooth/btmrvl_main.c | 14 ++++++++++++-- drivers/bluetooth/btmrvl_sdio.c | 8 +++++--- 3 files changed, 18 insertions(+), 6 deletions(-) diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h index 94f2d65131c4..27068d149380 100644 --- a/drivers/bluetooth/btmrvl_drv.h +++ b/drivers/bluetooth/btmrvl_drv.h @@ -136,7 +136,7 @@ int btmrvl_remove_card(struct btmrvl_private *priv); void btmrvl_interrupt(struct btmrvl_private *priv); -void btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb); +bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb); int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb); int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, int subcmd); diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c index 681ca9d18e12..dc304def8400 100644 --- a/drivers/bluetooth/btmrvl_main.c +++ b/drivers/bluetooth/btmrvl_main.c @@ -44,23 +44,33 @@ void btmrvl_interrupt(struct btmrvl_private *priv) } EXPORT_SYMBOL_GPL(btmrvl_interrupt); -void btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb) +bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb) { struct hci_event_hdr *hdr = (void *) skb->data; struct hci_ev_cmd_complete *ec; - u16 opcode, ocf; + u16 opcode, ocf, ogf; if (hdr->evt == HCI_EV_CMD_COMPLETE) { ec = (void *) (skb->data + HCI_EVENT_HDR_SIZE); opcode = __le16_to_cpu(ec->opcode); ocf = hci_opcode_ocf(opcode); + ogf = hci_opcode_ogf(opcode); + if (ocf == BT_CMD_MODULE_CFG_REQ && priv->btmrvl_dev.sendcmdflag) { priv->btmrvl_dev.sendcmdflag = false; priv->adapter->cmd_complete = true; wake_up_interruptible(&priv->adapter->cmd_wait_q); } + + if (ogf == OGF) { + BT_DBG("vendor event skipped: ogf 0x%4.4x", ogf); + kfree_skb(skb); + return false; + } } + + return true; } EXPORT_SYMBOL_GPL(btmrvl_check_evtpkt); diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c index a853244e7fd7..0cd61d9f07cd 100644 --- a/drivers/bluetooth/btmrvl_sdio.c +++ b/drivers/bluetooth/btmrvl_sdio.c @@ -562,10 +562,12 @@ static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv) skb_put(skb, buf_len); skb_pull(skb, SDIO_HEADER_LEN); - if (type == HCI_EVENT_PKT) - btmrvl_check_evtpkt(priv, skb); + if (type == HCI_EVENT_PKT) { + if (btmrvl_check_evtpkt(priv, skb)) + hci_recv_frame(skb); + } else + hci_recv_frame(skb); - hci_recv_frame(skb); hdev->stat.byte_rx += buf_len; break; -- cgit v1.2.3 From 39d84a58ad6290a43e6503acc8b54ebb7e4ecc54 Mon Sep 17 00:00:00 2001 From: Daniel Halperin Date: Mon, 18 Jun 2012 11:04:55 +0000 Subject: sctp: fix warning when compiling without IPv6 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit net/sctp/protocol.c: In function ‘sctp_addr_wq_timeout_handler’: net/sctp/protocol.c:676: warning: label ‘free_next’ defined but not used Signed-off-by: Daniel Halperin Signed-off-by: David S. Miller --- net/sctp/protocol.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index 5942d27b1444..9c90811d1134 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -673,7 +673,9 @@ void sctp_addr_wq_timeout_handler(unsigned long arg) SCTP_DEBUG_PRINTK("sctp_addrwq_timo_handler: sctp_asconf_mgmt failed\n"); sctp_bh_unlock_sock(sk); } +#if IS_ENABLED(CONFIG_IPV6) free_next: +#endif list_del(&addrw->list); kfree(addrw); } -- cgit v1.2.3 From 48d7d0ad9022b36be9fd8a236fb58ad4c0f3b80c Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Sun, 17 Jun 2012 22:52:09 +0000 Subject: phy/micrel: change phy_id_mask for KSZ9021 and KS8001 On a freescale imx6q platform, a hardware phy chip KSZ9021 is recognized as a KS8001 chip by the current driver like this: eth0: Freescale FEC PHY driver [Micrel KS8001 or KS8721] KSZ9021 has phy_id 0x00221610, while KSZ8001 has phy_id 0x0022161a, the current phy_id_mask (0x00fffff0/0x00ffff10) can't distinguish them. So change phy_id_mask to resolve this problem. Although the micrel datasheet says that the 4 LSB of phyid2 register contains the chip revision number and the current driver is designed to follow this rule, in reality the chip implementation doesn't follow it. Cc: David J. Choi Cc: David S. Miller Cc: Nobuhiro Iwamatsu Signed-off-by: Hui Wang Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 590f902deb6b..9d6c80c8a0cf 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -161,7 +161,7 @@ static struct phy_driver ks8051_driver = { static struct phy_driver ks8001_driver = { .phy_id = PHY_ID_KS8001, .name = "Micrel KS8001 or KS8721", - .phy_id_mask = 0x00fffff0, + .phy_id_mask = 0x00ffffff, .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .config_init = kszphy_config_init, @@ -174,7 +174,7 @@ static struct phy_driver ks8001_driver = { static struct phy_driver ksz9021_driver = { .phy_id = PHY_ID_KSZ9021, - .phy_id_mask = 0x000fff10, + .phy_id_mask = 0x000ffffe, .name = "Micrel KSZ9021 Gigabit PHY", .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), @@ -240,8 +240,8 @@ MODULE_AUTHOR("David J. Choi"); MODULE_LICENSE("GPL"); static struct mdio_device_id __maybe_unused micrel_tbl[] = { - { PHY_ID_KSZ9021, 0x000fff10 }, - { PHY_ID_KS8001, 0x00fffff0 }, + { PHY_ID_KSZ9021, 0x000ffffe }, + { PHY_ID_KS8001, 0x00ffffff }, { PHY_ID_KS8737, 0x00fffff0 }, { PHY_ID_KS8041, 0x00fffff0 }, { PHY_ID_KS8051, 0x00fffff0 }, -- cgit v1.2.3 From 76591bea9714a58d8924154068c78d702eb2cb17 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 15 Jun 2012 03:04:52 +0200 Subject: ath9k: fix a tx rate duration calculation bug The rate pointer variable for a rate series is used in a loop before it is initialized. This went unnoticed because it was used earlier for the RTS/CTS rate. This bug can lead to the wrong PHY type being passed to the duration calculation function. Signed-off-by: Felix Fietkau Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index d59dd01d6cde..efb7f00f3561 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1001,13 +1001,13 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf, } /* legacy rates */ + rate = &sc->sbands[tx_info->band].bitrates[rates[i].idx]; if ((tx_info->band == IEEE80211_BAND_2GHZ) && !(rate->flags & IEEE80211_RATE_ERP_G)) phy = WLAN_RC_PHY_CCK; else phy = WLAN_RC_PHY_OFDM; - rate = &sc->sbands[tx_info->band].bitrates[rates[i].idx]; info->rates[i].Rate = rate->hw_value; if (rate->hw_value_short) { if (rates[i].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) -- cgit v1.2.3 From 80b08a8d8829a58b5db14b1417151094cc28face Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 15 Jun 2012 03:04:53 +0200 Subject: ath9k: fix invalid pointer access in the tx path MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit After setup_frame_info has been called, only info->control.rates is still valid, other control fields have been overwritten by the ath_frame_info data. Move the access to info->control.vif for checking short preamble to setup_frame_info before it gets overwritten. This regression was introduced in commit d47a61aa "ath9k: Fix multi-VIF BSS handling" Signed-off-by: Felix Fietkau Reported-by: Thomas Hühn Acked-by: Sujith Manoharan Cc: stable@vger.kernel.org [3.4] Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 + drivers/net/wireless/ath/ath9k/xmit.c | 29 +++++++++++++++++------------ 2 files changed, 18 insertions(+), 12 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index a277cf6f339d..4866550ddd96 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -214,6 +214,7 @@ struct ath_frame_info { enum ath9k_key_type keytype; u8 keyix; u8 retries; + u8 rtscts_rate; }; struct ath_buf_state { diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index efb7f00f3561..4d571394c7a8 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -938,6 +938,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf, struct ieee80211_tx_rate *rates; const struct ieee80211_rate *rate; struct ieee80211_hdr *hdr; + struct ath_frame_info *fi = get_frame_info(bf->bf_mpdu); int i; u8 rix = 0; @@ -948,18 +949,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf, /* set dur_update_en for l-sig computation except for PS-Poll frames */ info->dur_update = !ieee80211_is_pspoll(hdr->frame_control); - - /* - * We check if Short Preamble is needed for the CTS rate by - * checking the BSS's global flag. - * But for the rate series, IEEE80211_TX_RC_USE_SHORT_PREAMBLE is used. - */ - rate = ieee80211_get_rts_cts_rate(sc->hw, tx_info); - info->rtscts_rate = rate->hw_value; - - if (tx_info->control.vif && - tx_info->control.vif->bss_conf.use_short_preamble) - info->rtscts_rate |= rate->hw_value_short; + info->rtscts_rate = fi->rtscts_rate; for (i = 0; i < 4; i++) { bool is_40, is_sgi, is_sp; @@ -1776,10 +1766,22 @@ static void setup_frame_info(struct ieee80211_hw *hw, struct sk_buff *skb, struct ieee80211_sta *sta = tx_info->control.sta; struct ieee80211_key_conf *hw_key = tx_info->control.hw_key; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + const struct ieee80211_rate *rate; struct ath_frame_info *fi = get_frame_info(skb); struct ath_node *an = NULL; enum ath9k_key_type keytype; + bool short_preamble = false; + + /* + * We check if Short Preamble is needed for the CTS rate by + * checking the BSS's global flag. + * But for the rate series, IEEE80211_TX_RC_USE_SHORT_PREAMBLE is used. + */ + if (tx_info->control.vif && + tx_info->control.vif->bss_conf.use_short_preamble) + short_preamble = true; + rate = ieee80211_get_rts_cts_rate(hw, tx_info); keytype = ath9k_cmn_get_hw_crypto_keytype(skb); if (sta) @@ -1794,6 +1796,9 @@ static void setup_frame_info(struct ieee80211_hw *hw, struct sk_buff *skb, fi->keyix = ATH9K_TXKEYIX_INVALID; fi->keytype = keytype; fi->framelen = framelen; + fi->rtscts_rate = rate->hw_value; + if (short_preamble) + fi->rtscts_rate |= rate->hw_value_short; } u8 ath_txchainmask_reduction(struct ath_softc *sc, u8 chainmask, u32 rate) -- cgit v1.2.3 From 6617942e15a16e97a1e2e93cee26f45e26243f43 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Fri, 15 Jun 2012 16:03:29 -0400 Subject: ath5k: remove _bh from inner locks spin_unlock_bh(&txq->lock) already disables softirqs so we don't want to do it here. Fixes smatch warnings: drivers/net/wireless/ath/ath5k/base.c:1048 ath5k_drain_tx_buffs() error: double lock 'bottom_half:' drivers/net/wireless/ath/ath5k/base.c:1056 ath5k_drain_tx_buffs() error: double unlock 'bottom_half:' Reported-by: Johannes Berg Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/base.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index fbaa30930076..44ad6fe0278f 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -1045,11 +1045,11 @@ ath5k_drain_tx_buffs(struct ath5k_hw *ah) ath5k_txbuf_free_skb(ah, bf); - spin_lock_bh(&ah->txbuflock); + spin_lock(&ah->txbuflock); list_move_tail(&bf->list, &ah->txbuf); ah->txbuf_len++; txq->txq_len--; - spin_unlock_bh(&ah->txbuflock); + spin_unlock(&ah->txbuflock); } txq->link = NULL; txq->txq_poll_mark = false; -- cgit v1.2.3 From 73dc3b90232780462f3771901024a160559b4532 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Fri, 15 Jun 2012 16:21:53 -0700 Subject: mwifiex: fix uAP TX packet timeout issue When running heavy traffic we stop the tx queue if the pending packet count reaches certain threshold. Later, the tx queue should be woken up as soon as the packet count falls below the threshold. Current code wakes TX queue up on STA interface only. Removing the check for STA interface will allow both STA and AP interfaces to resume transmit when tx_pending count becomes low. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/txrx.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/mwifiex/txrx.c b/drivers/net/wireless/mwifiex/txrx.c index e2faec4db108..cecb27283196 100644 --- a/drivers/net/wireless/mwifiex/txrx.c +++ b/drivers/net/wireless/mwifiex/txrx.c @@ -161,15 +161,11 @@ int mwifiex_write_data_complete(struct mwifiex_adapter *adapter, goto done; for (i = 0; i < adapter->priv_num; i++) { - tpriv = adapter->priv[i]; - if ((GET_BSS_ROLE(tpriv) == MWIFIEX_BSS_ROLE_STA) && - (tpriv->media_connected)) { - if (netif_queue_stopped(tpriv->netdev)) - mwifiex_wake_up_net_dev_queue(tpriv->netdev, - adapter); - } + if (tpriv->media_connected && + netif_queue_stopped(tpriv->netdev)) + mwifiex_wake_up_net_dev_queue(tpriv->netdev, adapter); } done: dev_kfree_skb_any(skb); -- cgit v1.2.3 From 7f59ebb5f34380696d16094fa1090485ec077fb1 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 18 Jun 2012 10:48:14 +0300 Subject: airo: copying wrong data in airo_get_aplist() "qual" used to be declared on the stack, but then in 998a5a7d6a ("airo: reduce stack memory footprint") we made it dynamically allocated. Unfortunately the memcpy() here was missed and it's still copying stack memory instead of the data that we want. In other words, "&qual" should be "qual". Signed-off-by: Dan Carpenter Signed-off-by: John W. Linville --- drivers/net/wireless/airo.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 520a4b2eb9cc..a747c632597a 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -7233,8 +7233,8 @@ static int airo_get_aplist(struct net_device *dev, } } else { dwrq->flags = 1; /* Should be define'd */ - memcpy(extra + sizeof(struct sockaddr)*i, - &qual, sizeof(struct iw_quality)*i); + memcpy(extra + sizeof(struct sockaddr) * i, qual, + sizeof(struct iw_quality) * i); } dwrq->length = i; -- cgit v1.2.3 From 858faa57dd9e2b91f3f870fbb1185982e42f5a2b Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Fri, 15 Jun 2012 15:49:54 -0700 Subject: mwifiex: fix wrong return values in add_virtual_intf() error cases add_virtual_intf() needs to return an ERR_PTR(), instead of NULL, on errors, otherwise cfg80211 will crash. Reported-by: Johannes Berg Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cfg80211.c | 25 +++++++++++-------------- 1 file changed, 11 insertions(+), 14 deletions(-) diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index 015fec3371a0..ce61b6fae1c9 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1484,7 +1484,7 @@ struct net_device *mwifiex_add_virtual_intf(struct wiphy *wiphy, struct wireless_dev *wdev; if (!adapter) - return NULL; + return ERR_PTR(-EFAULT); switch (type) { case NL80211_IFTYPE_UNSPECIFIED: @@ -1494,12 +1494,12 @@ struct net_device *mwifiex_add_virtual_intf(struct wiphy *wiphy, if (priv->bss_mode) { wiphy_err(wiphy, "cannot create multiple sta/adhoc ifaces\n"); - return NULL; + return ERR_PTR(-EINVAL); } wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL); if (!wdev) - return NULL; + return ERR_PTR(-ENOMEM); wdev->wiphy = wiphy; priv->wdev = wdev; @@ -1522,12 +1522,12 @@ struct net_device *mwifiex_add_virtual_intf(struct wiphy *wiphy, if (priv->bss_mode) { wiphy_err(wiphy, "Can't create multiple AP interfaces"); - return NULL; + return ERR_PTR(-EINVAL); } wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL); if (!wdev) - return NULL; + return ERR_PTR(-ENOMEM); priv->wdev = wdev; wdev->wiphy = wiphy; @@ -1544,14 +1544,15 @@ struct net_device *mwifiex_add_virtual_intf(struct wiphy *wiphy, break; default: wiphy_err(wiphy, "type not supported\n"); - return NULL; + return ERR_PTR(-EINVAL); } dev = alloc_netdev_mq(sizeof(struct mwifiex_private *), name, ether_setup, 1); if (!dev) { wiphy_err(wiphy, "no memory available for netdevice\n"); - goto error; + priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED; + return ERR_PTR(-ENOMEM); } mwifiex_init_priv_params(priv, dev); @@ -1582,7 +1583,9 @@ struct net_device *mwifiex_add_virtual_intf(struct wiphy *wiphy, /* Register network device */ if (register_netdevice(dev)) { wiphy_err(wiphy, "cannot register virtual network device\n"); - goto error; + free_netdev(dev); + priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED; + return ERR_PTR(-EFAULT); } sema_init(&priv->async_sem, 1); @@ -1594,12 +1597,6 @@ struct net_device *mwifiex_add_virtual_intf(struct wiphy *wiphy, mwifiex_dev_debugfs_init(priv); #endif return dev; -error: - if (dev && (dev->reg_state == NETREG_UNREGISTERED)) - free_netdev(dev); - priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED; - - return NULL; } EXPORT_SYMBOL_GPL(mwifiex_add_virtual_intf); -- cgit v1.2.3 From 2c995ff892313009e336ecc8ec3411022f5b1c39 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Tue, 19 Jun 2012 09:26:39 +0000 Subject: batman-adv: fix skb->data assignment skb_linearize(skb) possibly rearranges the skb internal data and then changes the skb->data pointer value. For this reason any other pointer in the code that was assigned skb->data before invoking skb_linearise(skb) must be re-assigned. In the current tt_query message handling code this is not done and therefore, in case of skb linearization, the pointer used to handle the packet header ends up in pointing to free'd memory. This bug was introduced by a73105b8d4c765d9ebfb664d0a66802127d8e4c7 (batman-adv: improved client announcement mechanism) Signed-off-by: Antonio Quartulli Cc: Signed-off-by: David S. Miller --- net/batman-adv/routing.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c index 840e2c64a301..015471d801b4 100644 --- a/net/batman-adv/routing.c +++ b/net/batman-adv/routing.c @@ -617,6 +617,8 @@ int recv_tt_query(struct sk_buff *skb, struct hard_iface *recv_if) * changes */ if (skb_linearize(skb) < 0) goto out; + /* skb_linearize() possibly changed skb->data */ + tt_query = (struct tt_query_packet *)skb->data; tt_len = tt_query->tt_data * sizeof(struct tt_change); -- cgit v1.2.3 From adc0fa413917bd973469560388446c52ce43b995 Mon Sep 17 00:00:00 2001 From: Carolyn Wyborny Date: Fri, 18 May 2012 02:07:53 +0000 Subject: igb: Fix incorrect RAR address entries for i210/i211 device. i210/i211 device has only 16 RAR address filters like 82575, instead of 32 like i350. This patch removes the entries for i210/i211 in the get_invariants function which was setting them for 32. This ensures that they will get the default value which is the correct one. Signed-off-by: Carolyn Wyborny Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/e1000_82575.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index e65083958421..5e84eaac48c1 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -206,8 +206,6 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) mac->rar_entry_count = E1000_RAR_ENTRIES_82580; break; case e1000_i350: - case e1000_i210: - case e1000_i211: mac->rar_entry_count = E1000_RAR_ENTRIES_I350; break; default: -- cgit v1.2.3 From 0e808bcc483773b4bcb45f02792b24ccfa428b68 Mon Sep 17 00:00:00 2001 From: Carolyn Wyborny Date: Fri, 18 May 2012 05:40:46 +0000 Subject: Kconfig: Fix Kconfig for Intel ixgbe and igb PTP support. Fix Kconfig file to make sure that PTP and IGB/IXGBE are both either in-kernel or modules, not mixed. Having the build status mixed causes compile errors. Signed-off-by: Carolyn Wyborny Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/Kconfig | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig index 79b07ec6726f..0cafe4fe9406 100644 --- a/drivers/net/ethernet/intel/Kconfig +++ b/drivers/net/ethernet/intel/Kconfig @@ -122,8 +122,10 @@ config IGB_DCA config IGB_PTP bool "PTP Hardware Clock (PHC)" - default y - depends on IGB && PTP_1588_CLOCK + default n + depends on IGB && EXPERIMENTAL + select PPS + select PTP_1588_CLOCK ---help--- Say Y here if you want to use PTP Hardware Clock (PHC) in the driver. Only the basic clock operations have been implemented. @@ -223,7 +225,9 @@ config IXGBE_DCB config IXGBE_PTP bool "PTP Clock Support" default n - depends on IXGBE && PTP_1588_CLOCK + depends on IXGBE && EXPERIMENTAL + select PPS + select PTP_1588_CLOCK ---help--- Say Y here if you want support for 1588 Timestamping with a PHC device, using the PTP 1588 Clock support. This is -- cgit v1.2.3 From 8633c0846160af0b8cfb983bbccd94ae42922af8 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Sat, 16 Jun 2012 07:31:19 +0000 Subject: ixgbe: Fix memory leak in ixgbe when receiving traffic on DDP enabled rings This patch fixes a memory leak that was introduced in the 3.4 kernel. The leak occurred when FCoE was enabled and traffic was passed over the FCoE rings reserved for FCoE. The memory leak was due to us not populating the compound page information on the order 1 pages needed for FCoE. Signed-off-by: Alexander Duyck Tested-by: Phil Schmitt Tested-by: Ross Brattain Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 17ad6a3c1be1..cbb05d65960f 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -1148,7 +1148,7 @@ static bool ixgbe_alloc_mapped_page(struct ixgbe_ring *rx_ring, /* alloc new page for storage */ if (likely(!page)) { - page = alloc_pages(GFP_ATOMIC | __GFP_COLD, + page = alloc_pages(GFP_ATOMIC | __GFP_COLD | __GFP_COMP, ixgbe_rx_pg_order(rx_ring)); if (unlikely(!page)) { rx_ring->rx_stats.alloc_rx_page_failed++; -- cgit v1.2.3 From cae6247db0b93673d170bc0e02aff85f53bc422c Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sat, 16 Jun 2012 22:26:46 +0300 Subject: wl1251: fix TSF calculation Cast MSB part of current TSF to u64 to prevent loss of most significant bits. MSB should also be shifted by 32. Patch based on old maemo patch by: Yuri Kululin Yuri Ershov Signed-off-by: Grazvydas Ignotas Signed-off-by: John W. Linville --- drivers/net/wireless/ti/wl1251/acx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ti/wl1251/acx.c b/drivers/net/wireless/ti/wl1251/acx.c index ad87a1ac6462..db6430c1a084 100644 --- a/drivers/net/wireless/ti/wl1251/acx.c +++ b/drivers/net/wireless/ti/wl1251/acx.c @@ -869,7 +869,7 @@ int wl1251_acx_tsf_info(struct wl1251 *wl, u64 *mactime) } *mactime = tsf_info->current_tsf_lsb | - (tsf_info->current_tsf_msb << 31); + ((u64)tsf_info->current_tsf_msb << 32); out: kfree(tsf_info); -- cgit v1.2.3 From 0d776fcdafed91403b1f453473771664ef7a66bd Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sat, 16 Jun 2012 22:26:47 +0300 Subject: wl1251: always report beacon loss to the stack Always report beacon loss to the stack, not only when in powersave state. This is because there's possibility that the driver disables PSM before it handles old BSS_LOSE_EVENT, so beacon loss has to be reported. Patch based on old maemo patch by: Janne Ylalehto Juuso Oikarinen Luciano Coelho Yuri Ershov Signed-off-by: Grazvydas Ignotas Signed-off-by: John W. Linville --- drivers/net/wireless/ti/wl1251/event.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/ti/wl1251/event.c b/drivers/net/wireless/ti/wl1251/event.c index 9f15ccaf8f05..5ec50a476a69 100644 --- a/drivers/net/wireless/ti/wl1251/event.c +++ b/drivers/net/wireless/ti/wl1251/event.c @@ -76,8 +76,7 @@ static int wl1251_event_process(struct wl1251 *wl, struct event_mailbox *mbox) } } - if (vector & SYNCHRONIZATION_TIMEOUT_EVENT_ID && - wl->station_mode != STATION_ACTIVE_MODE) { + if (vector & SYNCHRONIZATION_TIMEOUT_EVENT_ID) { wl1251_debug(DEBUG_EVENT, "SYNCHRONIZATION_TIMEOUT_EVENT"); /* indicate to the stack, that beacons have been lost */ -- cgit v1.2.3 From a859e4d6590b2429f518aa712b9e3edd367398d7 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sat, 16 Jun 2012 22:26:48 +0300 Subject: wl1251: Fix memory leaks in SPI initialization This patch fixes two memory leaks in the SPI initialization code. Patch based on old maemo patch by: Yuri Ershov Signed-off-by: Grazvydas Ignotas Signed-off-by: John W. Linville --- drivers/net/wireless/ti/wl1251/spi.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/ti/wl1251/spi.c b/drivers/net/wireless/ti/wl1251/spi.c index 87f6305bda2c..567660cd2fcd 100644 --- a/drivers/net/wireless/ti/wl1251/spi.c +++ b/drivers/net/wireless/ti/wl1251/spi.c @@ -73,6 +73,8 @@ static void wl1251_spi_reset(struct wl1251 *wl) spi_sync(wl_to_spi(wl), &m); wl1251_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN); + + kfree(cmd); } static void wl1251_spi_wake(struct wl1251 *wl) @@ -127,6 +129,8 @@ static void wl1251_spi_wake(struct wl1251 *wl) spi_sync(wl_to_spi(wl), &m); wl1251_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN); + + kfree(cmd); } static void wl1251_spi_reset_wake(struct wl1251 *wl) -- cgit v1.2.3 From f18e3c6b67f448ec47b3a5b242789bd3d5644879 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Mon, 18 Jun 2012 13:13:30 +0530 Subject: ath9k_hw: avoid possible infinite loop in ar9003_get_pll_sqsum_dvc "ath9k: Fix softlockup in AR9485" with commit id 64bc1239c790e051ff677e023435d770d2ffa174 fixed the reported issue, yet its better to avoid the possible infinite loop in ar9003_get_pll_sqsum_dvc by having a timeout as suggested by ath9k maintainers. http://www.spinics.net/lists/linux-wireless/msg92126.html. Based on my testing PLL's locking measurement is done in ~200us (2 iterations). Cc: stable@vger.kernel.org Cc: Rolf Offermanns Cc: Sujith Manoharan Cc: Senthil Balasubramanian Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 7db1890448f2..1c68e564f503 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -784,13 +784,25 @@ static void ath9k_hw_init_qos(struct ath_hw *ah) u32 ar9003_get_pll_sqsum_dvc(struct ath_hw *ah) { + struct ath_common *common = ath9k_hw_common(ah); + int i = 0; + REG_CLR_BIT(ah, PLL3, PLL3_DO_MEAS_MASK); udelay(100); REG_SET_BIT(ah, PLL3, PLL3_DO_MEAS_MASK); - while ((REG_READ(ah, PLL4) & PLL4_MEAS_DONE) == 0) + while ((REG_READ(ah, PLL4) & PLL4_MEAS_DONE) == 0) { + udelay(100); + if (WARN_ON_ONCE(i >= 100)) { + ath_err(common, "PLL4 meaurement not done\n"); + break; + } + + i++; + } + return (REG_READ(ah, PLL3) & SQSUM_DVC_MASK) >> 3; } EXPORT_SYMBOL(ar9003_get_pll_sqsum_dvc); -- cgit v1.2.3 From 882b7b7d11d65e8eccce738f1ce97cdfdb998f9f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 20 Jun 2012 08:46:25 +0200 Subject: iwlwifi: remove log_event debugfs file debugging is disabled When debugging is disabled, the event log functions aren't functional in the way that the debugfs file expects. This leads to the debugfs access crashing. Since the event log functions aren't functional then, remove the debugfs file when CONFIG_IWLWIFI_DEBUG is not set. Cc: stable@kernel.org Reported-by: Lekensteyn Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-debugfs.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c index e7c157e5ebeb..7f97dec8534d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c +++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c @@ -2239,6 +2239,7 @@ static ssize_t iwl_dbgfs_echo_test_write(struct file *file, return count; } +#ifdef CONFIG_IWLWIFI_DEBUG static ssize_t iwl_dbgfs_log_event_read(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) @@ -2276,6 +2277,7 @@ static ssize_t iwl_dbgfs_log_event_write(struct file *file, return count; } +#endif static ssize_t iwl_dbgfs_calib_disabled_read(struct file *file, char __user *user_buf, @@ -2345,7 +2347,9 @@ DEBUGFS_READ_FILE_OPS(bt_traffic); DEBUGFS_READ_WRITE_FILE_OPS(protection_mode); DEBUGFS_READ_FILE_OPS(reply_tx_error); DEBUGFS_WRITE_FILE_OPS(echo_test); +#ifdef CONFIG_IWLWIFI_DEBUG DEBUGFS_READ_WRITE_FILE_OPS(log_event); +#endif DEBUGFS_READ_WRITE_FILE_OPS(calib_disabled); /* @@ -2405,7 +2409,9 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name) DEBUGFS_ADD_FILE(rxon_flags, dir_debug, S_IWUSR); DEBUGFS_ADD_FILE(rxon_filter_flags, dir_debug, S_IWUSR); DEBUGFS_ADD_FILE(echo_test, dir_debug, S_IWUSR); +#ifdef CONFIG_IWLWIFI_DEBUG DEBUGFS_ADD_FILE(log_event, dir_debug, S_IWUSR | S_IRUSR); +#endif if (iwl_advanced_bt_coexist(priv)) DEBUGFS_ADD_FILE(bt_traffic, dir_debug, S_IRUSR); -- cgit v1.2.3 From 931cb03afed7b541392295f3afc4638da32f08a0 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Wed, 20 Jun 2012 16:29:20 +0530 Subject: ath9k_htc: configure bssid on ASSOC/IBSS change After the change "mac80211: remove spurious BSSID change flag", BSS_CHANGED_BSSID will not be passed on association or IBSS status changes. So it could be better to program bssid on ASSOC or IBSS change notification. Not doing so, is affecting the packet transmission. Cc: stable@vger.kernel.org [3.4+] Reported-by: Michael Leun Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/htc_drv_main.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index 2b8f61c210e1..abbd6effd60d 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -1496,6 +1496,7 @@ static void ath9k_htc_bss_info_changed(struct ieee80211_hw *hw, priv->num_sta_assoc_vif++ : priv->num_sta_assoc_vif--; if (priv->ah->opmode == NL80211_IFTYPE_STATION) { + ath9k_htc_choose_set_bssid(priv); if (bss_conf->assoc && (priv->num_sta_assoc_vif == 1)) ath9k_htc_start_ani(priv); else if (priv->num_sta_assoc_vif == 0) @@ -1503,13 +1504,11 @@ static void ath9k_htc_bss_info_changed(struct ieee80211_hw *hw, } } - if (changed & BSS_CHANGED_BSSID) { + if (changed & BSS_CHANGED_IBSS) { if (priv->ah->opmode == NL80211_IFTYPE_ADHOC) { common->curaid = bss_conf->aid; memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN); ath9k_htc_set_bssid(priv); - } else if (priv->ah->opmode == NL80211_IFTYPE_STATION) { - ath9k_htc_choose_set_bssid(priv); } } -- cgit v1.2.3 From b9f90eb2740203ff2592efe640409ad48335d1c2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Thu, 21 Jun 2012 02:45:58 +0000 Subject: net: qmi_wwan: fix Gobi device probing MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Ignoring interfaces with additional descriptors is not a reliable method for locating the correct interface on Gobi devices. There is at least one device where this method fails: https://bbs.archlinux.org/viewtopic.php?id=143506 The result is that the AT command port (interface #2) is hidden from qcserial, preventing traditional serial modem usage: [ 15.562552] qmi_wwan 4-1.6:1.0: cdc-wdm0: USB WDM device [ 15.562691] qmi_wwan 4-1.6:1.0: wwan0: register 'qmi_wwan' at usb-0000:00:1d.0-1.6, Qualcomm Gobi wwan/QMI device, 1e:df:3c:3a:4e:3b [ 15.563383] qmi_wwan: probe of 4-1.6:1.1 failed with error -22 [ 15.564189] qmi_wwan 4-1.6:1.2: cdc-wdm1: USB WDM device [ 15.564302] qmi_wwan 4-1.6:1.2: wwan1: register 'qmi_wwan' at usb-0000:00:1d.0-1.6, Qualcomm Gobi wwan/QMI device, 1e:df:3c:3a:4e:3b [ 15.564328] qmi_wwan: probe of 4-1.6:1.3 failed with error -22 [ 15.569376] qcserial 4-1.6:1.1: Qualcomm USB modem converter detected [ 15.569440] usb 4-1.6: Qualcomm USB modem converter now attached to ttyUSB0 [ 15.570372] qcserial 4-1.6:1.3: Qualcomm USB modem converter detected [ 15.570430] usb 4-1.6: Qualcomm USB modem converter now attached to ttyUSB1 Use static interface numbers taken from the interface map in qcserial for all Gobi devices instead: Gobi 1K USB layout: 0: serial port (doesn't respond) 1: serial port (doesn't respond) 2: AT-capable modem port 3: QMI/net Gobi 2K+ USB layout: 0: QMI/net 1: DM/DIAG (use libqcdm from ModemManager for communication) 2: AT-capable modem port 3: NMEA This should be more reliable over all, and will also prevent the noisy "probe failed" messages. The whitelisting logic is expected to be replaced by direct interface number matching in 3.6. Reported-by: Heinrich Siebmanns (Harvey) Cc: # v3.4: 0000188 USB: qmi_wwan: Make forced int 4 whitelist generic Cc: # v3.4: f7142e6 USB: qmi_wwan: Add ZTE (Vodafone) K3520-Z Cc: # v3.4 Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 83 ++++++++++++++++++++++------------------------ 1 file changed, 40 insertions(+), 43 deletions(-) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 3b206786b5e7..3767a1225860 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -257,29 +257,6 @@ err: return rv; } -/* Gobi devices uses identical class/protocol codes for all interfaces regardless - * of function. Some of these are CDC ACM like and have the exact same endpoints - * we are looking for. This leaves two possible strategies for identifying the - * correct interface: - * a) hardcoding interface number, or - * b) use the fact that the wwan interface is the only one lacking additional - * (CDC functional) descriptors - * - * Let's see if we can get away with the generic b) solution. - */ -static int qmi_wwan_bind_gobi(struct usbnet *dev, struct usb_interface *intf) -{ - int rv = -EINVAL; - - /* ignore any interface with additional descriptors */ - if (intf->cur_altsetting->extralen) - goto err; - - rv = qmi_wwan_bind_shared(dev, intf); -err: - return rv; -} - static void qmi_wwan_unbind_shared(struct usbnet *dev, struct usb_interface *intf) { struct usb_driver *subdriver = (void *)dev->data[0]; @@ -347,15 +324,15 @@ static const struct driver_info qmi_wwan_shared = { .manage_power = qmi_wwan_manage_power, }; -static const struct driver_info qmi_wwan_gobi = { - .description = "Qualcomm Gobi wwan/QMI device", +static const struct driver_info qmi_wwan_force_int0 = { + .description = "Qualcomm WWAN/QMI device", .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_gobi, + .bind = qmi_wwan_bind_shared, .unbind = qmi_wwan_unbind_shared, .manage_power = qmi_wwan_manage_power, + .data = BIT(0), /* interface whitelist bitmap */ }; -/* ZTE suck at making USB descriptors */ static const struct driver_info qmi_wwan_force_int1 = { .description = "Qualcomm WWAN/QMI device", .flags = FLAG_WWAN, @@ -365,6 +342,15 @@ static const struct driver_info qmi_wwan_force_int1 = { .data = BIT(1), /* interface whitelist bitmap */ }; +static const struct driver_info qmi_wwan_force_int3 = { + .description = "Qualcomm WWAN/QMI device", + .flags = FLAG_WWAN, + .bind = qmi_wwan_bind_shared, + .unbind = qmi_wwan_unbind_shared, + .manage_power = qmi_wwan_manage_power, + .data = BIT(3), /* interface whitelist bitmap */ +}; + static const struct driver_info qmi_wwan_force_int4 = { .description = "Qualcomm WWAN/QMI device", .flags = FLAG_WWAN, @@ -390,16 +376,23 @@ static const struct driver_info qmi_wwan_force_int4 = { static const struct driver_info qmi_wwan_sierra = { .description = "Sierra Wireless wwan/QMI device", .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_gobi, + .bind = qmi_wwan_bind_shared, .unbind = qmi_wwan_unbind_shared, .manage_power = qmi_wwan_manage_power, .data = BIT(8) | BIT(19), /* interface whitelist bitmap */ }; #define HUAWEI_VENDOR_ID 0x12D1 + +/* Gobi 1000 QMI/wwan interface number is 3 according to qcserial */ +#define QMI_GOBI1K_DEVICE(vend, prod) \ + USB_DEVICE(vend, prod), \ + .driver_info = (unsigned long)&qmi_wwan_force_int3 + +/* Gobi 2000 and Gobi 3000 QMI/wwan interface number is 0 according to qcserial */ #define QMI_GOBI_DEVICE(vend, prod) \ USB_DEVICE(vend, prod), \ - .driver_info = (unsigned long)&qmi_wwan_gobi + .driver_info = (unsigned long)&qmi_wwan_force_int0 static const struct usb_device_id products[] = { { /* Huawei E392, E398 and possibly others sharing both device id and more... */ @@ -510,20 +503,24 @@ static const struct usb_device_id products[] = { .bInterfaceProtocol = 0xff, .driver_info = (unsigned long)&qmi_wwan_sierra, }, - {QMI_GOBI_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ - {QMI_GOBI_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ - {QMI_GOBI_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */ - {QMI_GOBI_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */ - {QMI_GOBI_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */ - {QMI_GOBI_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */ - {QMI_GOBI_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */ - {QMI_GOBI_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */ - {QMI_GOBI_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */ - {QMI_GOBI_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */ - {QMI_GOBI_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */ - {QMI_GOBI_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */ - {QMI_GOBI_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */ - {QMI_GOBI_DEVICE(0x05c6, 0x9009)}, /* Generic Gobi Modem device */ + + /* Gobi 1000 devices */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ + {QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ + {QMI_GOBI1K_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */ + {QMI_GOBI1K_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9009)}, /* Generic Gobi Modem device */ + + /* Gobi 2000 and 3000 devices */ {QMI_GOBI_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */ {QMI_GOBI_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */ {QMI_GOBI_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */ -- cgit v1.2.3 From fb13c47b8e5ce707268bd38cfd082da377eac4b7 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 19 Jun 2012 21:15:51 +0000 Subject: usbnet: clear OPEN flag in failure path Without clearing OPEN flag in failure path, runtime or system resume may submit interrupt/rx URB and start tx queue mistakenly on a interface in DOWN state. Signed-off-by: Ming Lei Acked-by: Oliver Neukum Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index d4f7256a607d..815493caea7f 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -796,11 +796,13 @@ int usbnet_open (struct net_device *net) if (info->manage_power) { retval = info->manage_power(dev, 1); if (retval < 0) - goto done; + goto done_manage_power_error; usb_autopm_put_interface(dev->intf); } return retval; +done_manage_power_error: + clear_bit(EVENT_DEV_OPEN, &dev->flags); done: usb_autopm_put_interface(dev->intf); done_nopm: -- cgit v1.2.3 From 5eeb3132eb4c5e9ca92e5247fe4575fe9f8c3efe Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 19 Jun 2012 21:15:52 +0000 Subject: usbnet: decrease suspend count if returning -EBUSY for runtime suspend This patch decreases dev->suspend_count in the -EBUSY failure path of usbnet_suspend. Without the change, the later runtime suspend will do nothing except for increasing dev->suspend_count. Signed-off-by: Ming Lei Acked-by: Oliver Neukum Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 815493caea7f..1e46f693eb47 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1515,6 +1515,7 @@ int usbnet_suspend (struct usb_interface *intf, pm_message_t message) spin_lock_irq(&dev->txq.lock); /* don't autosuspend while transmitting */ if (dev->txq.qlen && PMSG_IS_AUTO(message)) { + dev->suspend_count--; spin_unlock_irq(&dev->txq.lock); return -EBUSY; } else { -- cgit v1.2.3 From 65841fd5132c3941cdf5df09e70df3ed28323212 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 19 Jun 2012 21:15:53 +0000 Subject: usbnet: handle remote wakeup asap If usbnet is resumed by remote wakeup, generally there are some packets comming to be handled, so allocate and submit rx URBs in usbnet_resume to avoid delays introduced by tasklet. Otherwise, usbnet may have been runtime suspended before the usbnet_bh is executed to schedule Rx URBs. Without the patch, usbnet can't recieve any packets from peer in runtime suspend state if runtime PM is enabled and autosuspend_delay is set as zero. Signed-off-by: Ming Lei Acked-by: Oliver Neukum Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 42 ++++++++++++++++++++++++++---------------- 1 file changed, 26 insertions(+), 16 deletions(-) diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 1e46f693eb47..aba769d77459 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1204,6 +1204,21 @@ deferred: } EXPORT_SYMBOL_GPL(usbnet_start_xmit); +static void rx_alloc_submit(struct usbnet *dev, gfp_t flags) +{ + struct urb *urb; + int i; + + /* don't refill the queue all at once */ + for (i = 0; i < 10 && dev->rxq.qlen < RX_QLEN(dev); i++) { + urb = usb_alloc_urb(0, flags); + if (urb != NULL) { + if (rx_submit(dev, urb, flags) == -ENOLINK) + return; + } + } +} + /*-------------------------------------------------------------------------*/ // tasklet (work deferred from completions, in_irq) or timer @@ -1243,26 +1258,14 @@ static void usbnet_bh (unsigned long param) !timer_pending (&dev->delay) && !test_bit (EVENT_RX_HALT, &dev->flags)) { int temp = dev->rxq.qlen; - int qlen = RX_QLEN (dev); - - if (temp < qlen) { - struct urb *urb; - int i; - - // don't refill the queue all at once - for (i = 0; i < 10 && dev->rxq.qlen < qlen; i++) { - urb = usb_alloc_urb (0, GFP_ATOMIC); - if (urb != NULL) { - if (rx_submit (dev, urb, GFP_ATOMIC) == - -ENOLINK) - return; - } - } + + if (temp < RX_QLEN(dev)) { + rx_alloc_submit(dev, GFP_ATOMIC); if (temp != dev->rxq.qlen) netif_dbg(dev, link, dev->net, "rxqlen %d --> %d\n", temp, dev->rxq.qlen); - if (dev->rxq.qlen < qlen) + if (dev->rxq.qlen < RX_QLEN(dev)) tasklet_schedule (&dev->bh); } if (dev->txq.qlen < TX_QLEN (dev)) @@ -1572,6 +1575,13 @@ int usbnet_resume (struct usb_interface *intf) spin_unlock_irq(&dev->txq.lock); if (test_bit(EVENT_DEV_OPEN, &dev->flags)) { + /* handle remote wakeup ASAP */ + if (!dev->wait && + netif_device_present(dev->net) && + !timer_pending(&dev->delay) && + !test_bit(EVENT_RX_HALT, &dev->flags)) + rx_alloc_submit(dev, GFP_KERNEL); + if (!(dev->txq.qlen >= TX_QLEN(dev))) netif_tx_wake_all_queues(dev->net); tasklet_schedule (&dev->bh); -- cgit v1.2.3 From eb2dc35d99028b698cdedba4f5522bc43e576bd2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Wed, 20 Jun 2012 12:09:18 +0000 Subject: r8169: RxConfig hack for the 8168evl. The 8168evl (RTL_GIGA_MAC_VER_34) based Gigabyte GA-990FXA motherboards are very prone to NETDEV watchdog problems without this change. See https://bugzilla.kernel.org/show_bug.cgi?id=42899 for instance. I don't know why it *works*. It's depressingly effective though. For the record: - the problem may go along IOMMU (AMD-Vi) errors but it really looks like a red herring. - the patch sets the RX_MULTI_EN bit. If the 8168c doc is any guide, the chipset now fetches several Rx descriptors at a time. - long ago the driver ignored the RX_MULTI_EN bit. e542a2269f232d61270ceddd42b73a4348dee2bb changed the RxConfig settings. Whatever the problem it's now labeled a regression. - Realtek's own driver can identify two different 8168evl devices (CFG_METHOD_16 and CFG_METHOD_17) where the r8169 driver only sees one. It sucks. Signed-off-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 7260aa79466a..d7a04e091101 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -3894,6 +3894,7 @@ static void rtl_init_rxcfg(struct rtl8169_private *tp) case RTL_GIGA_MAC_VER_22: case RTL_GIGA_MAC_VER_23: case RTL_GIGA_MAC_VER_24: + case RTL_GIGA_MAC_VER_34: RTL_W32(RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST); break; default: -- cgit v1.2.3 From a18e08bdcf845efb7344cea146e683df746bbfb4 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 20 Jun 2012 15:26:34 +0000 Subject: net: sh_eth: fix the condition to fix the cur_tx/dirty_rx The following commit couldn't work if the RMCR is not set to 1. "net: sh_eth: fix the rxdesc pointer when rx descriptor empty happens" commit id 79fba9f51755c704c0a7d7b7f0df10874dc0a744 If RMCR is not set, the controller will clear the EDRRR after it received a frame. In this case, the driver doesn't need to fix the value of cur_rx/dirty_rx. The driver only needs it when the controll detects receive descriptors are empty. Signed-off-by: Yoshihiro Shimoda Tested-by: Guennadi Liakhovetski Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 667169b82526..79bf09b41971 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -1011,7 +1011,7 @@ static int sh_eth_txfree(struct net_device *ndev) } /* Packet receive function */ -static int sh_eth_rx(struct net_device *ndev) +static int sh_eth_rx(struct net_device *ndev, u32 intr_status) { struct sh_eth_private *mdp = netdev_priv(ndev); struct sh_eth_rxdesc *rxdesc; @@ -1102,9 +1102,11 @@ static int sh_eth_rx(struct net_device *ndev) /* Restart Rx engine if stopped. */ /* If we don't need to check status, don't. -KDU */ if (!(sh_eth_read(ndev, EDRRR) & EDRRR_R)) { - /* fix the values for the next receiving */ - mdp->cur_rx = mdp->dirty_rx = (sh_eth_read(ndev, RDFAR) - - sh_eth_read(ndev, RDLAR)) >> 4; + /* fix the values for the next receiving if RDE is set */ + if (intr_status & EESR_RDE) + mdp->cur_rx = mdp->dirty_rx = + (sh_eth_read(ndev, RDFAR) - + sh_eth_read(ndev, RDLAR)) >> 4; sh_eth_write(ndev, EDRRR_R, EDRRR); } @@ -1273,7 +1275,7 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev) EESR_RTSF | /* short frame recv */ EESR_PRE | /* PHY-LSI recv error */ EESR_CERF)){ /* recv frame CRC error */ - sh_eth_rx(ndev); + sh_eth_rx(ndev, intr_status); } /* Tx Check */ -- cgit v1.2.3 From 5870adc68fc39d81089f1e80efdf64b97e5c37a1 Mon Sep 17 00:00:00 2001 From: Marek Lindner Date: Wed, 20 Jun 2012 17:16:05 +0200 Subject: batman-adv: only drop packets of known wifi clients bug introduced with 59b699cdee039d75915c354da06937102d1f9a84 If the source or destination mac address of an ethernet packet could not be found in the translation table the packet was dropped if AP isolation was turned on. This behavior would make it impossible to send broadcast packets over the mesh as the broadcast address will never enter the translation table. Signed-off-by: Marek Lindner Acked-by: Antonio Quartulli --- net/batman-adv/translation-table.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index a66c2dcd1088..660c40fe13ea 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -2031,10 +2031,10 @@ bool is_ap_isolated(struct bat_priv *bat_priv, uint8_t *src, uint8_t *dst) { struct tt_local_entry *tt_local_entry = NULL; struct tt_global_entry *tt_global_entry = NULL; - bool ret = true; + bool ret = false; if (!atomic_read(&bat_priv->ap_isolation)) - return false; + goto out; tt_local_entry = tt_local_hash_find(bat_priv, dst); if (!tt_local_entry) @@ -2044,10 +2044,10 @@ bool is_ap_isolated(struct bat_priv *bat_priv, uint8_t *src, uint8_t *dst) if (!tt_global_entry) goto out; - if (_is_ap_isolated(tt_local_entry, tt_global_entry)) + if (!_is_ap_isolated(tt_local_entry, tt_global_entry)) goto out; - ret = false; + ret = true; out: if (tt_global_entry) -- cgit v1.2.3 From 8b8e4bc0391f8abbcdb9e1c54415bcc0f4f5a2a0 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Wed, 20 Jun 2012 14:12:56 +0200 Subject: batman-adv: fix race condition in TT full-table replacement bug introduced with cea194d90b11aff7fc289149e4c7f305fad3535a In the current TT code, when a TT_Response containing a full table is received from an originator, first the node purges all the clients for that originator in the global translation-table and then merges the newly received table. During the purging phase each client deletion is done by means of a call_rcu() invocation and at the end of this phase the global entry counter for that originator is set to 0. However the invoked rcu function decreases the global entry counter for that originator by one too and since the rcu invocation is likely to be postponed, the node will end up in first setting the counter to 0 and then decreasing it one by one for each deleted client. This bug leads to having a wrong global entry counter for the related node, say X. Then when the node with the broken counter will answer to a TT_REQUEST on behalf of node X, it will create faulty TT_RESPONSE that will generate an unrecoverable situation on the node that asked for the full table recover. The non-recoverability is given by the fact that the node with the broken counter will keep answering on behalf of X because its knowledge about X's state (ttvn + tt_crc) is correct. To solve this problem the counter is not explicitly set to 0 anymore and the counter decrement is performed right before the invocation of call_rcu(). Signed-off-by: Antonio Quartulli --- net/batman-adv/translation-table.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index 660c40fe13ea..2ab83d7fb1f8 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -141,13 +141,14 @@ static void tt_orig_list_entry_free_rcu(struct rcu_head *rcu) struct tt_orig_list_entry *orig_entry; orig_entry = container_of(rcu, struct tt_orig_list_entry, rcu); - atomic_dec(&orig_entry->orig_node->tt_size); orig_node_free_ref(orig_entry->orig_node); kfree(orig_entry); } static void tt_orig_list_entry_free_ref(struct tt_orig_list_entry *orig_entry) { + /* to avoid race conditions, immediately decrease the tt counter */ + atomic_dec(&orig_entry->orig_node->tt_size); call_rcu(&orig_entry->rcu, tt_orig_list_entry_free_rcu); } @@ -910,7 +911,6 @@ void tt_global_del_orig(struct bat_priv *bat_priv, } spin_unlock_bh(list_lock); } - atomic_set(&orig_node->tt_size, 0); orig_node->tt_initialised = false; } -- cgit v1.2.3 From fa809e2fd6e317226c046202a88520962672eac0 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 25 Jun 2012 15:37:19 -0700 Subject: ipv6: fib: fix fib dump restart Commit 2bec5a369ee79576a3 (ipv6: fib: fix crash when changing large fib while dumping it) introduced ability to restart the dump at tree root, but failed to skip correctly a count of already dumped entries. Code didn't match Patrick intent. We must skip exactly the number of already dumped entries. Note that like other /proc/net files or netlink producers, we could still dump some duplicates entries. Reported-by: Debabrata Banerjee Reported-by: Josh Hunt Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv6/ip6_fib.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c index 74c21b924a79..608327661960 100644 --- a/net/ipv6/ip6_fib.c +++ b/net/ipv6/ip6_fib.c @@ -1349,8 +1349,8 @@ static int fib6_walk_continue(struct fib6_walker_t *w) if (w->leaf && fn->fn_flags & RTN_RTINFO) { int err; - if (w->count < w->skip) { - w->count++; + if (w->skip) { + w->skip--; continue; } -- cgit v1.2.3