From d4d9a553d7b96e18fcfbd0b8fb5f803b3a27e4e6 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Thu, 10 Dec 2009 22:55:13 +0800 Subject: MIPS: Cleanup and Fixup of compressed kernel support o Remove the .initrd section. The initrd section was already handled when vmlinux was linked. o Discard .MIPS.options, .options, .pdr, .reginfo, .comment and .note sections. If .MIPS.options is not removed, kernels compiled with gcc 3.4.6 will not boot. o Clean up the file format. o Remove several other unneeded sections. Tested with GCC 3.4.6 and 4.4.1 with and without initrd. Signed-off-by: Wu Zhangjin Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/785/ Signed-off-by: Ralf Baechle --- arch/mips/boot/compressed/Makefile | 9 +- arch/mips/boot/compressed/decompress.c | 10 -- arch/mips/boot/compressed/ld.script | 195 ++++++++++----------------------- 3 files changed, 59 insertions(+), 155 deletions(-) diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile index e27f40bbd4e5..671d3448fad4 100644 --- a/arch/mips/boot/compressed/Makefile +++ b/arch/mips/boot/compressed/Makefile @@ -56,7 +56,7 @@ $(obj)/piggy.o: $(obj)/vmlinux.$(suffix_y) $(obj)/dummy.o LDFLAGS_vmlinuz := $(LDFLAGS) -Ttext $(VMLINUZ_LOAD_ADDRESS) -T vmlinuz: $(src)/ld.script $(obj-y) $(obj)/piggy.o $(call if_changed,ld) - $(Q)$(OBJCOPY) $(OBJCOPYFLAGS) -R .comment -R .stab -R .stabstr -R .initrd -R .sysmap $@ + $(Q)$(OBJCOPY) $(OBJCOPYFLAGS) $@ # # Some DECstations need all possible sections of an ECOFF executable @@ -84,14 +84,11 @@ vmlinuz.ecoff: $(obj)/../elf2ecoff $(VMLINUZ) $(obj)/../elf2ecoff: $(src)/../elf2ecoff.c $(Q)$(HOSTCC) -o $@ $^ -drop-sections = .reginfo .mdebug .comment .note .pdr .options .MIPS.options -strip-flags = $(addprefix --remove-section=,$(drop-sections)) - -OBJCOPYFLAGS_vmlinuz.bin := $(OBJCOPYFLAGS) -O binary $(strip-flags) +OBJCOPYFLAGS_vmlinuz.bin := $(OBJCOPYFLAGS) -O binary vmlinuz.bin: vmlinuz $(call if_changed,objcopy) -OBJCOPYFLAGS_vmlinuz.srec := $(OBJCOPYFLAGS) -S -O srec $(strip-flags) +OBJCOPYFLAGS_vmlinuz.srec := $(OBJCOPYFLAGS) -S -O srec vmlinuz.srec: vmlinuz $(call if_changed,objcopy) diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c index 67330c2f7318..e48fd72898a8 100644 --- a/arch/mips/boot/compressed/decompress.c +++ b/arch/mips/boot/compressed/decompress.c @@ -28,8 +28,6 @@ char *zimage_start; /* The linker tells us where the image is. */ extern unsigned char __image_begin, __image_end; -extern unsigned char __ramdisk_begin, __ramdisk_end; -unsigned long initrd_size; /* debug interfaces */ extern void puts(const char *s); @@ -102,14 +100,6 @@ void decompress_kernel(unsigned long boot_heap_start) puthex((unsigned long)(zimage_size + zimage_start)); puts("\n"); - if (initrd_size) { - puts("initrd at: "); - puthex((unsigned long)(&__ramdisk_begin)); - puts(" "); - puthex((unsigned long)(&__ramdisk_end)); - puts("\n"); - } - /* this area are prepared for mallocing when decompressing */ free_mem_ptr = boot_heap_start; free_mem_end_ptr = boot_heap_start + BOOT_HEAP_SIZE; diff --git a/arch/mips/boot/compressed/ld.script b/arch/mips/boot/compressed/ld.script index 29e9f4c0d5d8..613a35b02f50 100644 --- a/arch/mips/boot/compressed/ld.script +++ b/arch/mips/boot/compressed/ld.script @@ -1,150 +1,67 @@ +/* + * ld.script for compressed kernel support of MIPS + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin + */ + OUTPUT_ARCH(mips) ENTRY(start) SECTIONS { - /* Read-only sections, merged into text segment: */ - .init : { *(.init) } =0 - .text : - { - _ftext = . ; - *(.text) - *(.rodata) - *(.rodata1) - /* .gnu.warning sections are handled specially by elf32.em. */ - *(.gnu.warning) - } =0 - .kstrtab : { *(.kstrtab) } - - . = ALIGN(16); /* Exception table */ - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - __start___dbe_table = .; /* Exception table for data bus errors */ - __dbe_table : { *(__dbe_table) } - __stop___dbe_table = .; - - __start___ksymtab = .; /* Kernel symbol table */ - __ksymtab : { *(__ksymtab) } - __stop___ksymtab = .; - - _etext = .; - - . = ALIGN(8192); - .data.init_task : { *(.data.init_task) } - - /* Startup code */ - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(16); - __setup_start = .; - .setup.init : { *(.setup.init) } - __setup_end = .; - __initcall_start = .; - .initcall.init : { *(.initcall.init) } - __initcall_end = .; - . = ALIGN(4096); /* Align double page for init_task_union */ - __init_end = .; - - . = ALIGN(4096); - .data.page_aligned : { *(.data.idt) } - - . = ALIGN(32); - .data.cacheline_aligned : { *(.data.cacheline_aligned) } + /* . = VMLINUZ_LOAD_ADDRESS */ + /* read-only */ + _text = .; /* Text and read-only data */ + .text : { + _ftext = . ; + *(.text) + *(.rodata) + } = 0 + _etext = .; /* End of text section */ - .fini : { *(.fini) } =0 - .reginfo : { *(.reginfo) } - /* Adjust the address for the data segment. We want to adjust up to - the same address within the page on the next page up. It would - be more correct to do this: - . = .; - The current expression does not correctly handle the case of a - text segment ending precisely at the end of a page; it causes the - data segment to skip a page. The above expression does not have - this problem, but it will currently (2/95) cause BFD to allocate - a single segment, combining both text and data, for this case. - This will prevent the text segment from being shared among - multiple executions of the program; I think that is more - important than losing a page of the virtual address space (note - that no actual memory is lost; the page which is skipped can not - be referenced). */ - . = .; - .data : - { - _fdata = . ; - *(.data) + /* writable */ + .data : { /* Data */ + _fdata = . ; + *(.data) + /* Put the compressed image here, so bss is on the end. */ + __image_begin = .; + *(.image) + __image_end = .; + CONSTRUCTORS + } + .sdata : { *(.sdata) } + . = ALIGN(4); + _edata = .; /* End of data section */ - /* Put the compressed image here, so bss is on the end. */ - __image_begin = .; - *(.image) - __image_end = .; - /* Align the initial ramdisk image (INITRD) on page boundaries. */ - . = ALIGN(4096); - __ramdisk_begin = .; - *(.initrd) - __ramdisk_end = .; - . = ALIGN(4096); + /* BSS */ + __bss_start = .; + _fbss = .; + .sbss : { *(.sbss) *(.scommon) } + .bss : { + *(.dynbss) + *(.bss) + *(COMMON) + } + . = ALIGN(4); + _end = . ; - CONSTRUCTORS - } - .data1 : { *(.data1) } - _gp = . + 0x8000; - .lit8 : { *(.lit8) } - .lit4 : { *(.lit4) } - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - .got : { *(.got.plt) *(.got) } - .dynamic : { *(.dynamic) } - /* We want the small data sections together, so single-instruction offsets - can access them all, and initialized data all before uninitialized, so - we can shorten the on-disk segment size. */ - .sdata : { *(.sdata) } - . = ALIGN(4); - _edata = .; - PROVIDE (edata = .); + /* These are needed for ELF backends which have not yet been converted + * to the new style linker. */ - __bss_start = .; - _fbss = .; - .sbss : { *(.sbss) *(.scommon) } - .bss : - { - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - _end = . ; - PROVIDE (end = .); - } + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } - /* Sections to be discarded */ - /DISCARD/ : - { - *(.text.exit) - *(.data.exit) - *(.exitcall.exit) - } + /* These must appear regardless of . */ + .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) } + .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) } - /* This is the MIPS specific mdebug section. */ - .mdebug : { *(.mdebug) } - /* These are needed for ELF backends which have not yet been - converted to the new style linker. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - /* DWARF debug sections. - Symbols in the .debug DWARF section are relative to the beginning of the - section so we begin .debug at 0. It's not clear yet what needs to happen - for the others. */ - .debug 0 : { *(.debug) } - .debug_srcinfo 0 : { *(.debug_srcinfo) } - .debug_aranges 0 : { *(.debug_aranges) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_sfnames 0 : { *(.debug_sfnames) } - .line 0 : { *(.line) } - /* These must appear regardless of . */ - .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) } - .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) } - .comment : { *(.comment) } - .note : { *(.note) } + /* Sections to be discarded */ + /DISCARD/ : { + *(.MIPS.options) + *(.options) + *(.pdr) + *(.reginfo) + *(.comment) + *(.note) + } } -- cgit v1.2.3