From d3a8a252e177cfaa2fb04120dd944104e4417bf5 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Mon, 10 Feb 2014 22:18:31 +0400 Subject: serial: max310x: Migrate to CLK API This patch removes "frequency" parameter from MAX310X platform_data and uses CLK API for getting clock. Clock type (XTAL/OSC) is determined by clk name. Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/max310x.c | 86 ++++++++++++++++++++++------------- include/linux/platform_data/max310x.h | 7 --- 2 files changed, 55 insertions(+), 38 deletions(-) diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 9e147f3d7291..310ee555fade 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -291,6 +292,7 @@ struct max310x_port { struct max310x_devtype *devtype; struct regmap *regmap; struct mutex mutex; + struct clk *clk; struct max310x_pdata *pdata; int gpio_used; #ifdef CONFIG_GPIOLIB @@ -546,18 +548,19 @@ static int max310x_update_best_err(unsigned long f, long *besterr) return 1; } -static int max310x_set_ref_clk(struct max310x_port *s) +static int max310x_set_ref_clk(struct max310x_port *s, unsigned long freq, + bool xtal) { unsigned int div, clksrc, pllcfg = 0; long besterr = -1; - unsigned long fdiv, fmul, bestfreq = s->pdata->frequency; + unsigned long fdiv, fmul, bestfreq = freq; /* First, update error without PLL */ - max310x_update_best_err(s->pdata->frequency, &besterr); + max310x_update_best_err(freq, &besterr); /* Try all possible PLL dividers */ for (div = 1; (div <= 63) && besterr; div++) { - fdiv = DIV_ROUND_CLOSEST(s->pdata->frequency, div); + fdiv = DIV_ROUND_CLOSEST(freq, div); /* Try multiplier 6 */ fmul = fdiv * 6; @@ -590,10 +593,7 @@ static int max310x_set_ref_clk(struct max310x_port *s) } /* Configure clock source */ - if (s->pdata->driver_flags & MAX310X_EXT_CLK) - clksrc = MAX310X_CLKSRC_EXTCLK_BIT; - else - clksrc = MAX310X_CLKSRC_CRYST_BIT; + clksrc = xtal ? MAX310X_CLKSRC_CRYST_BIT : MAX310X_CLKSRC_EXTCLK_BIT; /* Configure PLL */ if (pllcfg) { @@ -605,7 +605,7 @@ static int max310x_set_ref_clk(struct max310x_port *s) regmap_write(s->regmap, MAX310X_CLKSRC_REG, clksrc); /* Wait for crystal */ - if (pllcfg && !(s->pdata->driver_flags & MAX310X_EXT_CLK)) + if (pllcfg && xtal) msleep(10); return (int)bestfreq; @@ -1078,9 +1078,11 @@ static int max310x_gpio_direction_output(struct gpio_chip *chip, static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, struct regmap *regmap, int irq) { - struct max310x_port *s; struct max310x_pdata *pdata = dev_get_platdata(dev); - int i, ret, uartclk; + int i, ret, fmin, fmax, freq, uartclk; + struct clk *clk_osc, *clk_xtal; + struct max310x_port *s; + bool xtal = false; if (IS_ERR(regmap)) return PTR_ERR(regmap); @@ -1098,14 +1100,35 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, return -ENOMEM; } - /* Check input frequency */ - if ((pdata->driver_flags & MAX310X_EXT_CLK) && - ((pdata->frequency < 500000) || (pdata->frequency > 35000000))) - goto err_freq; - /* Check frequency for quartz */ - if (!(pdata->driver_flags & MAX310X_EXT_CLK) && - ((pdata->frequency < 1000000) || (pdata->frequency > 4000000))) - goto err_freq; + clk_osc = devm_clk_get(dev, "osc"); + clk_xtal = devm_clk_get(dev, "xtal"); + if (!IS_ERR(clk_osc)) { + s->clk = clk_osc; + fmin = 500000; + fmax = 35000000; + } else if (!IS_ERR(clk_xtal)) { + s->clk = clk_xtal; + fmin = 1000000; + fmax = 4000000; + xtal = true; + } else if (PTR_ERR(clk_osc) == -EPROBE_DEFER || + PTR_ERR(clk_xtal) == -EPROBE_DEFER) { + return -EPROBE_DEFER; + } else { + dev_err(dev, "Cannot get clock\n"); + return -EINVAL; + } + + ret = clk_prepare_enable(s->clk); + if (ret) + return ret; + + freq = clk_get_rate(s->clk); + /* Check frequency limits */ + if (freq < fmin || freq > fmax) { + ret = -ERANGE; + goto out_clk; + } s->pdata = pdata; s->regmap = regmap; @@ -1117,7 +1140,7 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, /* Check device to ensure we are talking to what we expect */ ret = devtype->detect(dev); if (ret) - return ret; + goto out_clk; for (i = 0; i < devtype->nr; i++) { unsigned int offs = i << 5; @@ -1139,7 +1162,7 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, MAX310X_MODE1_AUTOSLEEP_BIT); } - uartclk = max310x_set_ref_clk(s); + uartclk = max310x_set_ref_clk(s, freq, xtal); dev_dbg(dev, "Reference clock set to %i Hz\n", uartclk); /* Register UART driver */ @@ -1151,7 +1174,7 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, ret = uart_register_driver(&s->uart); if (ret) { dev_err(dev, "Registering UART driver failed\n"); - return ret; + goto out_clk; } for (i = 0; i < devtype->nr; i++) { @@ -1208,19 +1231,19 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, ret = devm_request_threaded_irq(dev, irq, NULL, max310x_ist, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, dev_name(dev), s); - if (ret) { - dev_err(dev, "Unable to reguest IRQ %i\n", irq); + if (!ret) + return 0; + + dev_err(dev, "Unable to reguest IRQ %i\n", irq); #ifdef CONFIG_GPIOLIB - if (s->gpio_used) - WARN_ON(gpiochip_remove(&s->gpio)); + if (s->gpio_used) + WARN_ON(gpiochip_remove(&s->gpio)); #endif - } - return ret; +out_clk: + clk_disable_unprepare(s->clk); -err_freq: - dev_err(dev, "Frequency parameter incorrect\n"); - return -EINVAL; + return ret; } static int max310x_remove(struct device *dev) @@ -1236,6 +1259,7 @@ static int max310x_remove(struct device *dev) } uart_unregister_driver(&s->uart); + clk_disable_unprepare(s->clk); #ifdef CONFIG_GPIOLIB if (s->gpio_used) diff --git a/include/linux/platform_data/max310x.h b/include/linux/platform_data/max310x.h index 9d5f69b2b57c..57a0cd46b847 100644 --- a/include/linux/platform_data/max310x.h +++ b/include/linux/platform_data/max310x.h @@ -20,9 +20,7 @@ * Example board initialization data: * * static struct max310x_pdata max3107_pdata = { - * .driver_flags = MAX310X_EXT_CLK, * .uart_flags[0] = MAX310X_ECHO_SUPRESS | MAX310X_AUTO_DIR_CTRL, - * .frequency = 3686400, * .gpio_base = -1, * }; * @@ -41,17 +39,12 @@ /* MAX310X platform data structure */ struct max310x_pdata { - /* Flags global to driver */ - const u8 driver_flags; -#define MAX310X_EXT_CLK (0x00000001) /* External clock enable */ /* Flags global to UART port */ const u8 uart_flags[MAX310X_MAX_UARTS]; #define MAX310X_ECHO_SUPRESS (0x00000002) /* Enable echo supress */ #define MAX310X_AUTO_DIR_CTRL (0x00000004) /* Enable Auto direction * control (RS-485) */ - /* Frequency (extrenal clock or crystal) */ - const int frequency; /* GPIO base number (can be negative) */ const int gpio_base; }; -- cgit v1.2.3