From cc1e06f033af66202f4018e823c446f40fbc4a51 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Mon, 6 Jan 2020 00:11:42 -0800 Subject: phy: qcom: qmp: Use power_on/off ops for PCIe The PCIe PHY initialization requires the attached device to be present, which is primarily achieved by the PCI controller driver. So move the logic from init/exit to power_on/power_off. Signed-off-by: Bjorn Andersson Reviewed-by: John Stultz Reviewed-by: Vinod Koul Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/qualcomm/phy-qcom-qmp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index e6c836b516fd..c190406246ab 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -2377,7 +2377,7 @@ static const struct phy_ops qcom_qmp_phy_gen_ops = { .owner = THIS_MODULE, }; -static const struct phy_ops qcom_qmp_ufs_ops = { +static const struct phy_ops qcom_qmp_pcie_ufs_ops = { .power_on = qcom_qmp_phy_enable, .power_off = qcom_qmp_phy_disable, .set_mode = qcom_qmp_phy_set_mode, @@ -2477,8 +2477,8 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id) } } - if (qmp->cfg->type == PHY_TYPE_UFS) - ops = &qcom_qmp_ufs_ops; + if (qmp->cfg->type == PHY_TYPE_UFS || qmp->cfg->type == PHY_TYPE_PCIE) + ops = &qcom_qmp_pcie_ufs_ops; generic_phy = devm_phy_create(dev, np, ops); if (IS_ERR(generic_phy)) { -- cgit v1.2.3