From 9a06bec9aee0ae54f175b20a8d4f5e14aef24a9f Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Tue, 28 Oct 2014 16:51:27 +0200 Subject: wil6210: Add support for large packets It is possible to configure driver using mtu_max module parameter by setting it to value in range of 68..7920 inclusive. This is sub-optimal performance-wise in case packet is larger than 1 page. mtu_max default value is 2228. Signed-off-by: Vladimir Kondratiev Signed-off-by: John W. Linville --- drivers/net/wireless/ath/wil6210/main.c | 29 +++++++++++++++++++++++++++++ drivers/net/wireless/ath/wil6210/netdev.c | 2 +- drivers/net/wireless/ath/wil6210/txrx.c | 7 ++++--- drivers/net/wireless/ath/wil6210/txrx.h | 4 ++-- drivers/net/wireless/ath/wil6210/wil6210.h | 1 + drivers/net/wireless/ath/wil6210/wmi.c | 2 +- 6 files changed, 38 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index 92705c0d97a4..6212983fede2 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -38,6 +38,35 @@ static unsigned int itr_trsh = WIL6210_ITR_TRSH_DEFAULT; module_param(itr_trsh, uint, S_IRUGO); MODULE_PARM_DESC(itr_trsh, " Interrupt moderation threshold, usecs."); +/* We allow allocation of more than 1 page buffers to support large packets. + * It is suboptimal behavior performance wise in case MTU above page size. + */ +unsigned int mtu_max = TXRX_BUF_LEN_DEFAULT - ETH_HLEN; +static int mtu_max_set(const char *val, const struct kernel_param *kp) +{ + int ret; + + /* sets mtu_max directly. no need to restore it in case of + * illegal value since we assume this will fail insmod + */ + ret = param_set_uint(val, kp); + if (ret) + return ret; + + if (mtu_max < 68 || mtu_max > IEEE80211_MAX_DATA_LEN_DMG) + ret = -EINVAL; + + return ret; +} + +static struct kernel_param_ops mtu_max_ops = { + .set = mtu_max_set, + .get = param_get_uint, +}; + +module_param_cb(mtu_max, &mtu_max_ops, &mtu_max, S_IRUGO); +MODULE_PARM_DESC(mtu_max, " Max MTU value."); + #define RST_DELAY (20) /* msec, for loop in @wil_target_reset */ #define RST_COUNT (1 + 1000/RST_DELAY) /* round up to be above 1 sec total */ diff --git a/drivers/net/wireless/ath/wil6210/netdev.c b/drivers/net/wireless/ath/wil6210/netdev.c index 239965106c05..e81703ca7701 100644 --- a/drivers/net/wireless/ath/wil6210/netdev.c +++ b/drivers/net/wireless/ath/wil6210/netdev.c @@ -41,7 +41,7 @@ static int wil_change_mtu(struct net_device *ndev, int new_mtu) { struct wil6210_priv *wil = ndev_to_wil(ndev); - if (new_mtu < 68 || new_mtu > (TX_BUF_LEN - ETH_HLEN)) { + if (new_mtu < 68 || new_mtu > mtu_max) { wil_err(wil, "invalid MTU %d\n", new_mtu); return -EINVAL; } diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c index 2936ef0c18cb..c680906bc0dc 100644 --- a/drivers/net/wireless/ath/wil6210/txrx.c +++ b/drivers/net/wireless/ath/wil6210/txrx.c @@ -206,7 +206,7 @@ static int wil_vring_alloc_skb(struct wil6210_priv *wil, struct vring *vring, u32 i, int headroom) { struct device *dev = wil_to_dev(wil); - unsigned int sz = RX_BUF_LEN; + unsigned int sz = mtu_max + ETH_HLEN; struct vring_rx_desc dd, *d = ⅆ volatile struct vring_rx_desc *_d = &vring->va[i].rx; dma_addr_t pa; @@ -385,7 +385,7 @@ static struct sk_buff *wil_vring_reap_rx(struct wil6210_priv *wil, struct vring_rx_desc *d; struct sk_buff *skb; dma_addr_t pa; - unsigned int sz = RX_BUF_LEN; + unsigned int sz = mtu_max + ETH_HLEN; u16 dmalen; u8 ftype; u8 ds_bits; @@ -646,7 +646,8 @@ int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size, .action = cpu_to_le32(WMI_VRING_CMD_ADD), .vring_cfg = { .tx_sw_ring = { - .max_mpdu_size = cpu_to_le16(TX_BUF_LEN), + .max_mpdu_size = + cpu_to_le16(mtu_max + ETH_HLEN), .ring_size = cpu_to_le16(size), }, .ringid = id, diff --git a/drivers/net/wireless/ath/wil6210/txrx.h b/drivers/net/wireless/ath/wil6210/txrx.h index de046716d2b7..630aeb5fa7f4 100644 --- a/drivers/net/wireless/ath/wil6210/txrx.h +++ b/drivers/net/wireless/ath/wil6210/txrx.h @@ -21,8 +21,8 @@ #define BUF_HW_OWNED (0) /* size of max. Tx/Rx buffers, as supported by FW */ -#define RX_BUF_LEN (2242) -#define TX_BUF_LEN (2242) +#define TXRX_BUF_LEN_DEFAULT (2242) + /* how many bytes to reserve for rtap header? */ #define WIL6210_RTAP_SIZE (128) diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h index 3674e2732192..95d3a062d35c 100644 --- a/drivers/net/wireless/ath/wil6210/wil6210.h +++ b/drivers/net/wireless/ath/wil6210/wil6210.h @@ -24,6 +24,7 @@ #include "wil_platform.h" extern bool no_fw_recovery; +extern unsigned int mtu_max; #define WIL_NAME "wil6210" #define WIL_FW_NAME "wil6210.fw" diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c index 9661fa150167..bb1e066f756a 100644 --- a/drivers/net/wireless/ath/wil6210/wmi.c +++ b/drivers/net/wireless/ath/wil6210/wmi.c @@ -1025,7 +1025,7 @@ int wmi_rx_chain_add(struct wil6210_priv *wil, struct vring *vring) struct wmi_cfg_rx_chain_cmd cmd = { .action = WMI_RX_CHAIN_ADD, .rx_sw_ring = { - .max_mpdu_size = cpu_to_le16(RX_BUF_LEN), + .max_mpdu_size = cpu_to_le16(mtu_max + ETH_HLEN), .ring_mem_base = cpu_to_le64(vring->pa), .ring_size = cpu_to_le16(vring->size), }, -- cgit v1.2.3