From 93032e31a5f12df847639db3ad0b7f300bf44b7b Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Fri, 14 Oct 2016 10:17:32 +0100 Subject: MIPS: Malta: Fixup reboot Commit 10b6ea0959de ("MIPS: Malta: Use syscon-reboot driver to reboot") converted the Malta board to use the generic syscon-reboot driver to handle reboots, but incorrectly used the value 0x4d rather than 0x42 as the magic to write to the reboot register. I also incorrectly believed that syscon/regmap would default to native endianness, but this isn't the case. Force this by specifying with a native-endian property in the devicetree. Signed-off-by: Paul Burton Fixes: 10b6ea0959de ("MIPS: Malta: Use syscon-reboot driver to reboot") Reported-by: Guenter Roeck Cc: linux-mips@linux-mips.org Tested-by: Guenter Roeck Tested-by: Maciej W. Rozycki Patchwork: https://patchwork.linux-mips.org/patch/14396/ Signed-off-by: Ralf Baechle --- arch/mips/boot/dts/mti/malta.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/mips/boot/dts/mti/malta.dts b/arch/mips/boot/dts/mti/malta.dts index f604a272d91d..ffe3a1508e72 100644 --- a/arch/mips/boot/dts/mti/malta.dts +++ b/arch/mips/boot/dts/mti/malta.dts @@ -84,12 +84,13 @@ fpga_regs: system-controller@1f000000 { compatible = "mti,malta-fpga", "syscon", "simple-mfd"; reg = <0x1f000000 0x1000>; + native-endian; reboot { compatible = "syscon-reboot"; regmap = <&fpga_regs>; offset = <0x500>; - mask = <0x4d>; + mask = <0x42>; }; }; -- cgit v1.2.3