From ac00531d9f4be487366573e2bb943e68e9e523ab Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 5 Dec 2014 19:25:28 +0200 Subject: mmc: sdhci: Tuning should not change max_blk_count Re-tuning requires that the maximum data length is limited to 4MiB. The code currently changes max_blk_count in an attempt to achieve that. This is wrong because max_blk_count is a different limit, but it is also un-necessary because max_req_size is 512KiB anyway. Consequently, the changes to max_blk_count are removed and the comment for max_req_size adjusted accordingly. The comment is also tweaked to show that the 512KiB limit is a SDMA limit not an ADMA limit. Signed-off-by: Adrian Hunter Reviewed-by: Aaron Lu Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index cbb245b58538..040158d4fc9a 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -259,8 +259,6 @@ static void sdhci_reinit(struct sdhci_host *host) del_timer_sync(&host->tuning_timer); host->flags &= ~SDHCI_NEEDS_RETUNING; - host->mmc->max_blk_count = - (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535; } sdhci_enable_card_detection(host); } @@ -2048,8 +2046,6 @@ out: host->flags |= SDHCI_USING_RETUNING_TIMER; mod_timer(&host->tuning_timer, jiffies + host->tuning_count * HZ); - /* Tuning mode 1 limits the maximum data length to 4MB */ - mmc->max_blk_count = (4 * 1024 * 1024) / mmc->max_blk_size; } else if (host->flags & SDHCI_USING_RETUNING_TIMER) { host->flags &= ~SDHCI_NEEDS_RETUNING; /* Reload the new initial value for timer */ @@ -3260,8 +3256,9 @@ int sdhci_add_host(struct sdhci_host *host) mmc->max_segs = SDHCI_MAX_SEGS; /* - * Maximum number of sectors in one transfer. Limited by DMA boundary - * size (512KiB). + * Maximum number of sectors in one transfer. Limited by SDMA boundary + * size (512KiB). Note some tuning modes impose a 4MiB limit, but this + * is less anyway. */ mmc->max_req_size = 524288; -- cgit v1.2.3 From d519c863fc198f43c979e9d6a74b53d9c53d55aa Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 5 Dec 2014 19:25:29 +0200 Subject: mmc: sdhci: Add out_unlock to sdhci_execute_tuning A 'goto' can be used to save duplicating unlocking and returning. Signed-off-by: Adrian Hunter Reviewed-by: Aaron Lu Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 040158d4fc9a..c45beaff1ab5 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1909,9 +1909,7 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) /* FALLTHROUGH */ default: - spin_unlock_irqrestore(&host->lock, flags); - sdhci_runtime_pm_put(host); - return 0; + goto out_unlock; } if (host->ops->platform_execute_tuning) { @@ -2066,6 +2064,7 @@ out: sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); +out_unlock: spin_unlock_irqrestore(&host->lock, flags); sdhci_runtime_pm_put(host); -- cgit v1.2.3 From 38e40bf5db9d5b8cbaeca9a78ee17f38473dd78d Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 5 Dec 2014 19:25:30 +0200 Subject: mmc: sdhci: Simplify use of tuning timer The tuning timer is always used if the tuning mode is 1 and there is a tuning count, irrespective of whether this is the first call, or any subsequent call. Consequently the logic to start the timer can be simplified. Signed-off-by: Adrian Hunter Reviewed-by: Aaron Lu Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 23 ++++++++--------------- 1 file changed, 8 insertions(+), 15 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index c45beaff1ab5..5c28c19622e6 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1885,10 +1885,14 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) int tuning_loop_counter = MAX_TUNING_LOOP; int err = 0; unsigned long flags; + unsigned int tuning_count = 0; sdhci_runtime_pm_get(host); spin_lock_irqsave(&host->lock, flags); + if (host->tuning_mode == SDHCI_TUNING_MODE_1) + tuning_count = host->tuning_count; + /* * The Host Controller needs tuning only in case of SDR104 mode * and for SDR50 mode when Use Tuning for SDR50 is set in the @@ -2033,22 +2037,11 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) } out: - /* - * If this is the very first time we are here, we start the retuning - * timer. Since only during the first time, SDHCI_NEEDS_RETUNING - * flag won't be set, we check this condition before actually starting - * the timer. - */ - if (!(host->flags & SDHCI_NEEDS_RETUNING) && host->tuning_count && - (host->tuning_mode == SDHCI_TUNING_MODE_1)) { + host->flags &= ~SDHCI_NEEDS_RETUNING; + + if (tuning_count) { host->flags |= SDHCI_USING_RETUNING_TIMER; - mod_timer(&host->tuning_timer, jiffies + - host->tuning_count * HZ); - } else if (host->flags & SDHCI_USING_RETUNING_TIMER) { - host->flags &= ~SDHCI_NEEDS_RETUNING; - /* Reload the new initial value for timer */ - mod_timer(&host->tuning_timer, jiffies + - host->tuning_count * HZ); + mod_timer(&host->tuning_timer, jiffies + tuning_count * HZ); } /* -- cgit v1.2.3 From b5540ce1512eede3bed68ab1e9949df9ad556091 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 5 Dec 2014 19:25:31 +0200 Subject: mmc: sdhci: Disable re-tuning for HS400 Re-tuning for HS400 mode must be done in HS200 mode. Currently there is no support for that. That needs to be reflected in the code. Specifically, if tuning is executed in HS400 mode then return an error, and do not start the tuning timer if HS200 tuning is being done prior to switching to HS400. Note that periodic re-tuning is not expected to be needed for HS400 but re-tuning is still needed after the host controller has lost power. In the case of suspend/resume that is not necessary because the card is fully re-initialised. That just leaves runtime suspend/resume with no support for HS400 re-tuning. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 29 +++++++++++++++++++++++++++++ include/linux/mmc/sdhci.h | 1 + 2 files changed, 30 insertions(+) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 5c28c19622e6..398e9e496736 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1878,6 +1878,18 @@ static int sdhci_card_busy(struct mmc_host *mmc) return !(present_state & SDHCI_DATA_LVL_MASK); } +static int sdhci_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct sdhci_host *host = mmc_priv(mmc); + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + host->flags |= SDHCI_HS400_TUNING; + spin_unlock_irqrestore(&host->lock, flags); + + return 0; +} + static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) { struct sdhci_host *host = mmc_priv(mmc); @@ -1886,10 +1898,14 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) int err = 0; unsigned long flags; unsigned int tuning_count = 0; + bool hs400_tuning; sdhci_runtime_pm_get(host); spin_lock_irqsave(&host->lock, flags); + hs400_tuning = host->flags & SDHCI_HS400_TUNING; + host->flags &= ~SDHCI_HS400_TUNING; + if (host->tuning_mode == SDHCI_TUNING_MODE_1) tuning_count = host->tuning_count; @@ -1901,8 +1917,20 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) * tuning function has to be executed. */ switch (host->timing) { + /* HS400 tuning is done in HS200 mode */ case MMC_TIMING_MMC_HS400: + err = -EINVAL; + goto out_unlock; + case MMC_TIMING_MMC_HS200: + /* + * Periodic re-tuning for HS400 is not expected to be needed, so + * disable it here. + */ + if (hs400_tuning) + tuning_count = 0; + break; + case MMC_TIMING_UHS_SDR104: break; @@ -2130,6 +2158,7 @@ static const struct mmc_host_ops sdhci_ops = { .hw_reset = sdhci_hw_reset, .enable_sdio_irq = sdhci_enable_sdio_irq, .start_signal_voltage_switch = sdhci_start_signal_voltage_switch, + .prepare_hs400_tuning = sdhci_prepare_hs400_tuning, .execute_tuning = sdhci_execute_tuning, .card_event = sdhci_card_event, .card_busy = sdhci_card_busy, diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index 375af80bde7d..f767a0de611f 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -137,6 +137,7 @@ struct sdhci_host { #define SDHCI_SDR104_NEEDS_TUNING (1<<10) /* SDR104/HS200 needs tuning */ #define SDHCI_USING_RETUNING_TIMER (1<<11) /* Host is using a retuning timer for the card */ #define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */ +#define SDHCI_HS400_TUNING (1<<13) /* Tuning for HS400 */ unsigned int version; /* SDHCI spec. version */ -- cgit v1.2.3 From aa8165f914420f143476305a01894b017d3abe6b Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 31 Dec 2014 11:54:10 +0100 Subject: mmc: sdhci-pxav3: do the mbus window configuration after enabling clocks In commit 5491ce3f79ee ("mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controller"), the sdhci-pxav3 driver was extended to include support for the SDHCI controller found in the Armada 38x processor. This mainly involved adding some MBus window related configuration. However, this configuration is currently done too early in ->probe(): it is done before clocks are enabled, while this configuration involves touching the registers of the controller, which will hang the SoC if the clock is disabled. It wasn't noticed until now because the bootloader typically leaves gatable clocks enabled, but in situations where we have a deferred probe (due to a CD GPIO that cannot be taken, for example), then the probe will be re-tried later, after a clock disable has been done in the exit path of the failed probe attempt of the device. This second probe() will hang the system due to the clock being disabled. This can for example be produced on Armada 385 GP, which has a CD GPIO connected to an I2C PCA9555. If the driver for the PCA9555 is not compiled into the kernel, then we will have the following sequence of events: 1. The SDHCI probes 2. It does the MBus configuration (which works, because the clock is left enabled by the bootloader) 3. It enables the clock 4. It tries to get the CD GPIO, which fails due to the driver being missing, so -EPROBE_DEFER is returned. 5. Before returning -EPROBE_DEFER, the driver cleans up what was done, which includes disabling the clock. 6. Later on, the SDHCI probe is tried again. 7. It does the MBus configuration, which hangs because the clock is no longer enabled. This commit does the obvious fix of doing the MBus configuration after the clock has been enabled by the driver. Fixes: 5491ce3f79ee ("mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controller") Cc: # v3.15+ Signed-off-by: Thomas Petazzoni Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-pxav3.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c index 45238871192d..ca3424e7ef71 100644 --- a/drivers/mmc/host/sdhci-pxav3.c +++ b/drivers/mmc/host/sdhci-pxav3.c @@ -300,13 +300,6 @@ static int sdhci_pxav3_probe(struct platform_device *pdev) if (IS_ERR(host)) return PTR_ERR(host); - if (of_device_is_compatible(np, "marvell,armada-380-sdhci")) { - ret = mv_conf_mbus_windows(pdev, mv_mbus_dram_info()); - if (ret < 0) - goto err_mbus_win; - } - - pltfm_host = sdhci_priv(host); pltfm_host->priv = pxa; @@ -325,6 +318,12 @@ static int sdhci_pxav3_probe(struct platform_device *pdev) if (!IS_ERR(pxa->clk_core)) clk_prepare_enable(pxa->clk_core); + if (of_device_is_compatible(np, "marvell,armada-380-sdhci")) { + ret = mv_conf_mbus_windows(pdev, mv_mbus_dram_info()); + if (ret < 0) + goto err_mbus_win; + } + /* enable 1/8V DDR capable */ host->mmc->caps |= MMC_CAP_1_8V_DDR; @@ -396,11 +395,11 @@ err_add_host: pm_runtime_disable(&pdev->dev); err_of_parse: err_cd_req: +err_mbus_win: clk_disable_unprepare(pxa->clk_io); if (!IS_ERR(pxa->clk_core)) clk_disable_unprepare(pxa->clk_core); err_clk_get: -err_mbus_win: sdhci_pltfm_free(pdev); return ret; } -- cgit v1.2.3 From 2836766a9d0bd02c66073f8dd44796e6cc23848d Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 5 Jan 2015 10:50:15 +0100 Subject: mmc: sdhci: Fix sleep in atomic after inserting SD card Sleep in atomic context happened on Trats2 board after inserting or removing SD card because mmc_gpio_get_cd() was called under spin lock. Fix this by moving card detection earlier, before acquiring spin lock. The mmc_gpio_get_cd() call does not have to be protected by spin lock because it does not access any sdhci internal data. The sdhci_do_get_cd() call access host flags (SDHCI_DEVICE_DEAD). After moving it out side of spin lock it could theoretically race with driver removal but still there is no actual protection against manual card eject. Dmesg after inserting SD card: [ 41.663414] BUG: sleeping function called from invalid context at drivers/gpio/gpiolib.c:1511 [ 41.670469] in_atomic(): 1, irqs_disabled(): 128, pid: 30, name: kworker/u8:1 [ 41.677580] INFO: lockdep is turned off. [ 41.681486] irq event stamp: 61972 [ 41.684872] hardirqs last enabled at (61971): [] _raw_spin_unlock_irq+0x24/0x5c [ 41.693118] hardirqs last disabled at (61972): [] _raw_spin_lock_irq+0x18/0x54 [ 41.701190] softirqs last enabled at (61648): [] __do_softirq+0x234/0x2c8 [ 41.708914] softirqs last disabled at (61631): [] irq_exit+0xd0/0x114 [ 41.716206] Preemption disabled at:[< (null)>] (null) [ 41.721500] [ 41.722985] CPU: 3 PID: 30 Comm: kworker/u8:1 Tainted: G W 3.18.0-rc5-next-20141121 #883 [ 41.732111] Workqueue: kmmcd mmc_rescan [ 41.735945] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 41.743661] [] (show_stack) from [] (dump_stack+0x70/0xbc) [ 41.750867] [] (dump_stack) from [] (gpiod_get_raw_value_cansleep+0x18/0x30) [ 41.759628] [] (gpiod_get_raw_value_cansleep) from [] (mmc_gpio_get_cd+0x38/0x58) [ 41.768821] [] (mmc_gpio_get_cd) from [] (sdhci_request+0x50/0x1a4) [ 41.776808] [] (sdhci_request) from [] (mmc_start_request+0x138/0x268) [ 41.785051] [] (mmc_start_request) from [] (mmc_wait_for_req+0x58/0x1a0) [ 41.793469] [] (mmc_wait_for_req) from [] (mmc_wait_for_cmd+0x58/0x78) [ 41.801714] [] (mmc_wait_for_cmd) from [] (mmc_io_rw_direct_host+0x98/0x124) [ 41.810480] [] (mmc_io_rw_direct_host) from [] (sdio_reset+0x2c/0x64) [ 41.818641] [] (sdio_reset) from [] (mmc_rescan+0x254/0x2e4) [ 41.826028] [] (mmc_rescan) from [] (process_one_work+0x180/0x3f4) [ 41.833920] [] (process_one_work) from [] (worker_thread+0x34/0x4b0) [ 41.841991] [] (worker_thread) from [] (kthread+0xe4/0x104) [ 41.849285] [] (kthread) from [] (ret_from_fork+0x14/0x2c) [ 42.038276] mmc0: new high speed SDHC card at address 1234 Signed-off-by: Krzysztof Kozlowski Fixes: 94144a465dd0 ("mmc: sdhci: add get_cd() implementation") Cc: Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 398e9e496736..1453cd127921 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1351,6 +1351,8 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) sdhci_runtime_pm_get(host); + present = mmc_gpio_get_cd(host->mmc); + spin_lock_irqsave(&host->lock, flags); WARN_ON(host->mrq != NULL); @@ -1379,7 +1381,6 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) * zero: cd-gpio is used, and card is removed * one: cd-gpio is used, and card is present */ - present = mmc_gpio_get_cd(host->mmc); if (present < 0) { /* If polling, assume that the card is always present. */ if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) @@ -2126,15 +2127,18 @@ static void sdhci_card_event(struct mmc_host *mmc) { struct sdhci_host *host = mmc_priv(mmc); unsigned long flags; + int present; /* First check if client has provided their own card event */ if (host->ops->card_event) host->ops->card_event(host); + present = sdhci_do_get_cd(host); + spin_lock_irqsave(&host->lock, flags); /* Check host->mrq first in case we are runtime suspended */ - if (host->mrq && !sdhci_do_get_cd(host)) { + if (host->mrq && !present) { pr_err("%s: Card removed during transfer!\n", mmc_hostname(host->mmc)); pr_err("%s: Resetting controller.\n", -- cgit v1.2.3 From d0ed8e6b0ab149421cd1532e7c5ebb0992ad25d0 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Mon, 5 Jan 2015 14:47:57 +0200 Subject: mmc: sdhci-acpi: Add ACPI HID INT344D Add ACPI HID INT344D for an Intel SDIO host controller. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-acpi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index e3e56d35f0ee..970314e0aac8 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -247,6 +247,7 @@ static const struct sdhci_acpi_uid_slot sdhci_acpi_uids[] = { { "INT33BB" , "3" , &sdhci_acpi_slot_int_sd }, { "INT33C6" , NULL, &sdhci_acpi_slot_int_sdio }, { "INT3436" , NULL, &sdhci_acpi_slot_int_sdio }, + { "INT344D" , NULL, &sdhci_acpi_slot_int_sdio }, { "PNP0D40" }, { }, }; @@ -257,6 +258,7 @@ static const struct acpi_device_id sdhci_acpi_ids[] = { { "INT33BB" }, { "INT33C6" }, { "INT3436" }, + { "INT344D" }, { "PNP0D40" }, { }, }; -- cgit v1.2.3 From 1f7f26528fb159e71f081df1d1050c218ff1d74d Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Mon, 5 Jan 2015 14:47:58 +0200 Subject: mmc: sdhci-pci: Add support for Intel SPT Add PCI IDs for SPT eMMC, SDIO and SD card. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-pci.c | 25 +++++++++++++++++++++++++ drivers/mmc/host/sdhci-pci.h | 3 +++ 2 files changed, 28 insertions(+) diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index 03427755b902..4f38554ce679 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -993,6 +993,31 @@ static const struct pci_device_id pci_ids[] = { .subdevice = PCI_ANY_ID, .driver_data = (kernel_ulong_t)&sdhci_intel_mrfl_mmc, }, + + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_SPT_EMMC, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_byt_emmc, + }, + + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_SPT_SDIO, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_byt_sdio, + }, + + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_SPT_SD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_byt_sd, + }, + { .vendor = PCI_VENDOR_ID_O2, .device = PCI_DEVICE_ID_O2_8120, diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h index d57c3d169914..1ec684d06d54 100644 --- a/drivers/mmc/host/sdhci-pci.h +++ b/drivers/mmc/host/sdhci-pci.h @@ -21,6 +21,9 @@ #define PCI_DEVICE_ID_INTEL_CLV_EMMC0 0x08e5 #define PCI_DEVICE_ID_INTEL_CLV_EMMC1 0x08e6 #define PCI_DEVICE_ID_INTEL_QRK_SD 0x08A7 +#define PCI_DEVICE_ID_INTEL_SPT_EMMC 0x9d2b +#define PCI_DEVICE_ID_INTEL_SPT_SDIO 0x9d2c +#define PCI_DEVICE_ID_INTEL_SPT_SD 0x9d2d /* * PCI registers -- cgit v1.2.3