From d6dab7dd123ba6a737e69d89c8cca9c6d9b75aa9 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 19 Dec 2012 22:16:59 +0100 Subject: hwmon: Fix PCI device reference leak in quirk Thankfully this only affects systems with one specific south bridge and is most probably harmless unless the hwmon module is heavily cycled. Signed-off-by: Jean Delvare Acked-by: Guenter Roeck --- drivers/hwmon/hwmon.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c index c3c471ca202f..646314f7c839 100644 --- a/drivers/hwmon/hwmon.c +++ b/drivers/hwmon/hwmon.c @@ -84,19 +84,21 @@ static void __init hwmon_pci_quirks(void) /* Open access to 0x295-0x296 on MSI MS-7031 */ sb = pci_get_device(PCI_VENDOR_ID_ATI, 0x436c, NULL); - if (sb && - (sb->subsystem_vendor == 0x1462 && /* MSI */ - sb->subsystem_device == 0x0031)) { /* MS-7031 */ - - pci_read_config_byte(sb, 0x48, &enable); - pci_read_config_word(sb, 0x64, &base); - - if (base == 0 && !(enable & BIT(2))) { - dev_info(&sb->dev, - "Opening wide generic port at 0x295\n"); - pci_write_config_word(sb, 0x64, 0x295); - pci_write_config_byte(sb, 0x48, enable | BIT(2)); + if (sb) { + if (sb->subsystem_vendor == 0x1462 && /* MSI */ + sb->subsystem_device == 0x0031) { /* MS-7031 */ + pci_read_config_byte(sb, 0x48, &enable); + pci_read_config_word(sb, 0x64, &base); + + if (base == 0 && !(enable & BIT(2))) { + dev_info(&sb->dev, + "Opening wide generic port at 0x295\n"); + pci_write_config_word(sb, 0x64, 0x295); + pci_write_config_byte(sb, 0x48, + enable | BIT(2)); + } } + pci_dev_put(sb); } #endif } -- cgit v1.2.3 From 275b7d6ebe9e3599b2d178089171afd63d3fda02 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 19 Dec 2012 22:16:59 +0100 Subject: hwmon: (w83627hf) Add support for suspend On suspend some register values are lost, most notably the Value RAM areas but also other limits. Restore them on resume. On top of that, some fixups are needed to work around BIOS bugs, in particular when the BIOS omits running the same initialization sequence on resume that it does after boot. In that case we have to carry initialization over suspend. Signed-off-by: Jean Delvare Acked-by: Guenter Roeck Tested-by: Guenter Roeck --- drivers/hwmon/w83627hf.c | 75 +++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 74 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 7f68b8309d10..9170746e9743 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -5,7 +5,7 @@ * Philip Edelbrock , * and Mark Studebaker * Ported to 2.6 by Bernhard C. Schrenk - * Copyright (c) 2007 Jean Delvare + * Copyright (c) 2007 - 1012 Jean Delvare * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -389,6 +389,12 @@ struct w83627hf_data { */ u8 vrm; u8 vrm_ovt; /* Register value, 627THF/637HF/687THF only */ + +#ifdef CONFIG_PM + /* Remember extra register values over suspend/resume */ + u8 scfg1; + u8 scfg2; +#endif }; @@ -401,10 +407,77 @@ static void w83627hf_update_fan_div(struct w83627hf_data *data); static struct w83627hf_data *w83627hf_update_device(struct device *dev); static void w83627hf_init_device(struct platform_device *pdev); +#ifdef CONFIG_PM +static int w83627hf_suspend(struct device *dev) +{ + struct w83627hf_data *data = w83627hf_update_device(dev); + + mutex_lock(&data->update_lock); + data->scfg1 = w83627hf_read_value(data, W83781D_REG_SCFG1); + data->scfg2 = w83627hf_read_value(data, W83781D_REG_SCFG2); + mutex_unlock(&data->update_lock); + + return 0; +} + +static int w83627hf_resume(struct device *dev) +{ + struct w83627hf_data *data = dev_get_drvdata(dev); + int i, num_temps = (data->type == w83697hf) ? 2 : 3; + + /* Restore limits */ + mutex_lock(&data->update_lock); + for (i = 0; i <= 8; i++) { + /* skip missing sensors */ + if (((data->type == w83697hf) && (i == 1)) || + ((data->type != w83627hf && data->type != w83697hf) + && (i == 5 || i == 6))) + continue; + w83627hf_write_value(data, W83781D_REG_IN_MAX(i), + data->in_max[i]); + w83627hf_write_value(data, W83781D_REG_IN_MIN(i), + data->in_min[i]); + } + for (i = 0; i <= 2; i++) + w83627hf_write_value(data, W83627HF_REG_FAN_MIN(i), + data->fan_min[i]); + for (i = 0; i < num_temps; i++) { + w83627hf_write_value(data, w83627hf_reg_temp_over[i], + data->temp_max[i]); + w83627hf_write_value(data, w83627hf_reg_temp_hyst[i], + data->temp_max_hyst[i]); + } + + /* Fixup BIOS bugs */ + if (data->type == w83627thf || data->type == w83637hf || + data->type == w83687thf) + w83627hf_write_value(data, W83627THF_REG_VRM_OVT_CFG, + data->vrm_ovt); + w83627hf_write_value(data, W83781D_REG_SCFG1, data->scfg1); + w83627hf_write_value(data, W83781D_REG_SCFG2, data->scfg2); + + /* Force re-reading all values */ + data->valid = 0; + mutex_unlock(&data->update_lock); + + return 0; +} + +static const struct dev_pm_ops w83627hf_dev_pm_ops = { + .suspend = w83627hf_suspend, + .resume = w83627hf_resume, +}; + +#define W83627HF_DEV_PM_OPS (&w83627hf_dev_pm_ops) +#else +#define W83627HF_DEV_PM_OPS NULL +#endif /* CONFIG_PM */ + static struct platform_driver w83627hf_driver = { .driver = { .owner = THIS_MODULE, .name = DRVNAME, + .pm = W83627HF_DEV_PM_OPS, }, .probe = w83627hf_probe, .remove = w83627hf_remove, -- cgit v1.2.3 From 7e630bb55a52cfaa35011c0ebc2efc96f13e5135 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 19 Dec 2012 22:16:59 +0100 Subject: hwmon: (w83627ehf) Add support for suspend On suspend some register values are lost, most notably the Value RAM areas but also other limits and settings. Restore them on resume. Signed-off-by: Jean Delvare Reviewed-by: Guenter Roeck Tested-by: Guenter Roeck --- drivers/hwmon/w83627ehf.c | 95 ++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 94 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index 55ac41c05561..7fbd0ba0f26f 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -1,7 +1,7 @@ /* * w83627ehf - Driver for the hardware monitoring functionality of * the Winbond W83627EHF Super-I/O chip - * Copyright (C) 2005-2011 Jean Delvare + * Copyright (C) 2005-2012 Jean Delvare * Copyright (C) 2006 Yuan Mu (Winbond), * Rudolf Marek * David Hubbard @@ -502,6 +502,13 @@ struct w83627ehf_data { u16 have_temp_offset; u8 in6_skip:1; u8 temp3_val_only:1; + +#ifdef CONFIG_PM + /* Remember extra register values over suspend/resume */ + u8 vbat; + u8 fandiv1; + u8 fandiv2; +#endif }; struct w83627ehf_sio_data { @@ -2608,10 +2615,96 @@ static int w83627ehf_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM +static int w83627ehf_suspend(struct device *dev) +{ + struct w83627ehf_data *data = w83627ehf_update_device(dev); + struct w83627ehf_sio_data *sio_data = dev->platform_data; + + mutex_lock(&data->update_lock); + data->vbat = w83627ehf_read_value(data, W83627EHF_REG_VBAT); + if (sio_data->kind == nct6775) { + data->fandiv1 = w83627ehf_read_value(data, NCT6775_REG_FANDIV1); + data->fandiv2 = w83627ehf_read_value(data, NCT6775_REG_FANDIV2); + } + mutex_unlock(&data->update_lock); + + return 0; +} + +static int w83627ehf_resume(struct device *dev) +{ + struct w83627ehf_data *data = dev_get_drvdata(dev); + struct w83627ehf_sio_data *sio_data = dev->platform_data; + int i; + + mutex_lock(&data->update_lock); + data->bank = 0xff; /* Force initial bank selection */ + + /* Restore limits */ + for (i = 0; i < data->in_num; i++) { + if ((i == 6) && data->in6_skip) + continue; + + w83627ehf_write_value(data, W83627EHF_REG_IN_MIN(i), + data->in_min[i]); + w83627ehf_write_value(data, W83627EHF_REG_IN_MAX(i), + data->in_max[i]); + } + + for (i = 0; i < 5; i++) { + if (!(data->has_fan_min & (1 << i))) + continue; + + w83627ehf_write_value(data, data->REG_FAN_MIN[i], + data->fan_min[i]); + } + + for (i = 0; i < NUM_REG_TEMP; i++) { + if (!(data->have_temp & (1 << i))) + continue; + + if (data->reg_temp_over[i]) + w83627ehf_write_temp(data, data->reg_temp_over[i], + data->temp_max[i]); + if (data->reg_temp_hyst[i]) + w83627ehf_write_temp(data, data->reg_temp_hyst[i], + data->temp_max_hyst[i]); + if (data->have_temp_offset & (1 << i)) + w83627ehf_write_value(data, + W83627EHF_REG_TEMP_OFFSET[i], + data->temp_offset[i]); + } + + /* Restore other settings */ + w83627ehf_write_value(data, W83627EHF_REG_VBAT, data->vbat); + if (sio_data->kind == nct6775) { + w83627ehf_write_value(data, NCT6775_REG_FANDIV1, data->fandiv1); + w83627ehf_write_value(data, NCT6775_REG_FANDIV2, data->fandiv2); + } + + /* Force re-reading all values */ + data->valid = 0; + mutex_unlock(&data->update_lock); + + return 0; +} + +static const struct dev_pm_ops w83627ehf_dev_pm_ops = { + .suspend = w83627ehf_suspend, + .resume = w83627ehf_resume, +}; + +#define W83627EHF_DEV_PM_OPS (&w83627ehf_dev_pm_ops) +#else +#define W83627EHF_DEV_PM_OPS NULL +#endif /* CONFIG_PM */ + static struct platform_driver w83627ehf_driver = { .driver = { .owner = THIS_MODULE, .name = DRVNAME, + .pm = W83627EHF_DEV_PM_OPS, }, .probe = w83627ehf_probe, .remove = w83627ehf_remove, -- cgit v1.2.3 From 8f3c7c547d47bcfcf9ca2ed30b79733ce1e7ad3a Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 19 Dec 2012 22:17:00 +0100 Subject: hwmon: (w83627hf) Don't touch nonexistent I2C address registers Only the W83627HF could be accessed through I2C. All other supported chips are LPC-only, so they do not have I2C address registers. Don't write to nonexistent or reserved registers on these chips. Signed-off-by: Jean Delvare Acked-by: Guenter Roeck --- drivers/hwmon/w83627hf.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 9170746e9743..81f486520cea 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -1732,8 +1732,10 @@ static void w83627hf_init_device(struct platform_device *pdev) /* Minimize conflicts with other winbond i2c-only clients... */ /* disable i2c subclients... how to disable main i2c client?? */ /* force i2c address to relatively uncommon address */ - w83627hf_write_value(data, W83781D_REG_I2C_SUBADDR, 0x89); - w83627hf_write_value(data, W83781D_REG_I2C_ADDR, force_i2c); + if (type == w83627hf) { + w83627hf_write_value(data, W83781D_REG_I2C_SUBADDR, 0x89); + w83627hf_write_value(data, W83781D_REG_I2C_ADDR, force_i2c); + } /* Read VID only once */ if (type == w83627hf || type == w83637hf) { -- cgit v1.2.3 From 45633fb370fdd16608756d587245459bf8983a26 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 19 Dec 2012 22:17:00 +0100 Subject: hwmon: (w83627ehf) Get rid of smatch warnings The smatch static code analyzer complains: drivers/hwmon/w83627ehf.c:911 w83627ehf_update_device() error: buffer overflow 'W83627EHF_REG_TEMP_OFFSET' 3 <= 8 drivers/hwmon/w83627ehf.c:909 w83627ehf_update_device() error: buffer overflow 'data->temp_offset' 3 <= 8 drivers/hwmon/w83627ehf.c:2672 w83627ehf_resume() error: buffer overflow 'W83627EHF_REG_TEMP_OFFSET' 3 <= 8 drivers/hwmon/w83627ehf.c:2673 w83627ehf_resume() error: buffer overflow 'data->temp_offset' 3 <= 8 A deeper analysis of the code shows that these are false positives, as only the lower 3 bits of data->have_temp_offset can be set so the write is never attempted with i >= 3. However this shows that the code isn't very robust and future changes could easily introduce a buffer overflow. So let's add a safety check to prevent that and make smatch happy. Signed-off-by: Jean Delvare Cc: Peter Huewe Reviewed-by: Guenter Roeck --- drivers/hwmon/w83627ehf.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index 7fbd0ba0f26f..0e8ffd6059a0 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -905,6 +905,8 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) data->temp_max_hyst[i] = w83627ehf_read_temp(data, data->reg_temp_hyst[i]); + if (i > 2) + continue; if (data->have_temp_offset & (1 << i)) data->temp_offset[i] = w83627ehf_read_value(data, @@ -2670,6 +2672,8 @@ static int w83627ehf_resume(struct device *dev) if (data->reg_temp_hyst[i]) w83627ehf_write_temp(data, data->reg_temp_hyst[i], data->temp_max_hyst[i]); + if (i > 2) + continue; if (data->have_temp_offset & (1 << i)) w83627ehf_write_value(data, W83627EHF_REG_TEMP_OFFSET[i], -- cgit v1.2.3 From 60ca385a530405ab501773ef4c9e222825a6cd40 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 19 Dec 2012 22:17:00 +0100 Subject: hwmon: (it87) Save temperature registers in 2-dimensional array Cleaner code, fewer checkpatch errors, and reduced code size (saves more than 500 bytes on x86-64). Signed-off-by: Guenter Roeck Signed-off-by: Jean Delvare --- drivers/hwmon/it87.c | 98 +++++++++++++++++++--------------------------------- 1 file changed, 35 insertions(+), 63 deletions(-) diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index d32aa354cbdf..76ab1d0e42d0 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -265,9 +265,7 @@ struct it87_data { u16 fan[5]; /* Register values, possibly combined */ u16 fan_min[5]; /* Register values, possibly combined */ u8 has_temp; /* Bitfield, temp sensors enabled */ - s8 temp[3]; /* Register value */ - s8 temp_high[3]; /* Register value */ - s8 temp_low[3]; /* Register value */ + s8 temp[3][3]; /* [nr][0]=temp, [1]=min, [2]=max */ u8 sensor; /* Register value */ u8 fan_div[3]; /* Register encoding, shifted right */ u8 vid; /* Register encoding, combined */ @@ -545,56 +543,22 @@ show_in_offset(8); /* 3 temperatures */ static ssize_t show_temp(struct device *dev, struct device_attribute *attr, - char *buf) + char *buf) { - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + int nr = sattr->nr; + int index = sattr->index; struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr])); -} -static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr])); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr][index])); } -static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_low[nr])); -} -static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t set_temp(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = dev_get_drvdata(dev); - long val; - - if (kstrtol(buf, 10, &val) < 0) - return -EINVAL; - - mutex_lock(&data->update_lock); - data->temp_high[nr] = TEMP_TO_REG(val); - it87_write_value(data, IT87_REG_TEMP_HIGH(nr), data->temp_high[nr]); - mutex_unlock(&data->update_lock); - return count; -} -static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + int nr = sattr->nr; + int index = sattr->index; struct it87_data *data = dev_get_drvdata(dev); long val; @@ -602,22 +566,30 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, return -EINVAL; mutex_lock(&data->update_lock); - data->temp_low[nr] = TEMP_TO_REG(val); - it87_write_value(data, IT87_REG_TEMP_LOW(nr), data->temp_low[nr]); + data->temp[nr][index] = TEMP_TO_REG(val); + it87_write_value(data, + index == 1 ? IT87_REG_TEMP_LOW(nr) + : IT87_REG_TEMP_HIGH(nr), + data->temp[nr][index]); mutex_unlock(&data->update_lock); return count; } -#define show_temp_offset(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ - show_temp, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ - show_temp_max, set_temp_max, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ - show_temp_min, set_temp_min, offset - 1); -show_temp_offset(1); -show_temp_offset(2); -show_temp_offset(3); +static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0); +static SENSOR_DEVICE_ATTR_2(temp1_min, S_IRUGO | S_IWUSR, show_temp, set_temp, + 0, 1); +static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp, set_temp, + 0, 2); +static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 1, 0); +static SENSOR_DEVICE_ATTR_2(temp2_min, S_IRUGO | S_IWUSR, show_temp, set_temp, + 1, 1); +static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, set_temp, + 1, 2); +static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 2, 0); +static SENSOR_DEVICE_ATTR_2(temp3_min, S_IRUGO | S_IWUSR, show_temp, set_temp, + 2, 1); +static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp, set_temp, + 2, 2); static ssize_t show_sensor(struct device *dev, struct device_attribute *attr, char *buf) @@ -2419,12 +2391,12 @@ static struct it87_data *it87_update_device(struct device *dev) for (i = 0; i < 3; i++) { if (!(data->has_temp & (1 << i))) continue; - data->temp[i] = + data->temp[i][0] = it87_read_value(data, IT87_REG_TEMP(i)); - data->temp_high[i] = - it87_read_value(data, IT87_REG_TEMP_HIGH(i)); - data->temp_low[i] = + data->temp[i][1] = it87_read_value(data, IT87_REG_TEMP_LOW(i)); + data->temp[i][2] = + it87_read_value(data, IT87_REG_TEMP_HIGH(i)); } /* Newer chips don't have clock dividers */ -- cgit v1.2.3 From 929c6a5696f5efe7f4213cf9d8b12144a0c0c650 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 19 Dec 2012 22:17:00 +0100 Subject: hwmon: (it87) Save voltage register values in 2-dimensional array Reduces code size (more than 600 bytes on x86_64), and gets rid of some checkpatch errors. Signed-off-by: Guenter Roeck Signed-off-by: Jean Delvare --- drivers/hwmon/it87.c | 147 +++++++++++++++++++++++---------------------------- 1 file changed, 66 insertions(+), 81 deletions(-) diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 76ab1d0e42d0..79a1229d3499 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -258,9 +258,7 @@ struct it87_data { unsigned long last_updated; /* In jiffies */ u16 in_scaled; /* Internal voltage sensors are scaled */ - u8 in[9]; /* Register value */ - u8 in_max[8]; /* Register value */ - u8 in_min[8]; /* Register value */ + u8 in[9][3]; /* [nr][0]=in, [1]=min, [2]=max */ u8 has_fan; /* Bitfield, fans enabled */ u16 fan[5]; /* Register values, possibly combined */ u16 fan_min[5]; /* Register values, possibly combined */ @@ -445,40 +443,22 @@ static struct platform_driver it87_driver = { }; static ssize_t show_in(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%d\n", in_from_reg(data, nr, data->in[nr])); -} - -static ssize_t show_in_min(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%d\n", in_from_reg(data, nr, data->in_min[nr])); -} - -static ssize_t show_in_max(struct device *dev, struct device_attribute *attr, - char *buf) + char *buf) { - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + int nr = sattr->nr; + int index = sattr->index; struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%d\n", in_from_reg(data, nr, data->in_max[nr])); + return sprintf(buf, "%d\n", in_from_reg(data, nr, data->in[nr][index])); } -static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t set_in(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + int nr = sattr->nr; + int index = sattr->index; struct it87_data *data = dev_get_drvdata(dev); unsigned long val; @@ -487,59 +467,64 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, return -EINVAL; mutex_lock(&data->update_lock); - data->in_min[nr] = in_to_reg(data, nr, val); - it87_write_value(data, IT87_REG_VIN_MIN(nr), - data->in_min[nr]); + data->in[nr][index] = in_to_reg(data, nr, val); + it87_write_value(data, + index == 1 ? IT87_REG_VIN_MIN(nr) + : IT87_REG_VIN_MAX(nr), + data->in[nr][index]); mutex_unlock(&data->update_lock); return count; } -static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct it87_data *data = dev_get_drvdata(dev); - unsigned long val; +static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0); +static SENSOR_DEVICE_ATTR_2(in0_min, S_IRUGO | S_IWUSR, show_in, set_in, + 0, 1); +static SENSOR_DEVICE_ATTR_2(in0_max, S_IRUGO | S_IWUSR, show_in, set_in, + 0, 2); - if (kstrtoul(buf, 10, &val) < 0) - return -EINVAL; +static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 1, 0); +static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO | S_IWUSR, show_in, set_in, + 1, 1); +static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_in, set_in, + 1, 2); - mutex_lock(&data->update_lock); - data->in_max[nr] = in_to_reg(data, nr, val); - it87_write_value(data, IT87_REG_VIN_MAX(nr), - data->in_max[nr]); - mutex_unlock(&data->update_lock); - return count; -} +static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 2, 0); +static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_in, set_in, + 2, 1); +static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_in, set_in, + 2, 2); -#define show_in_offset(offset) \ -static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \ - show_in, NULL, offset); - -#define limit_in_offset(offset) \ -static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in_min, set_in_min, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in_max, set_in_max, offset); - -show_in_offset(0); -limit_in_offset(0); -show_in_offset(1); -limit_in_offset(1); -show_in_offset(2); -limit_in_offset(2); -show_in_offset(3); -limit_in_offset(3); -show_in_offset(4); -limit_in_offset(4); -show_in_offset(5); -limit_in_offset(5); -show_in_offset(6); -limit_in_offset(6); -show_in_offset(7); -limit_in_offset(7); -show_in_offset(8); +static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO, show_in, NULL, 3, 0); +static SENSOR_DEVICE_ATTR_2(in3_min, S_IRUGO | S_IWUSR, show_in, set_in, + 3, 1); +static SENSOR_DEVICE_ATTR_2(in3_max, S_IRUGO | S_IWUSR, show_in, set_in, + 3, 2); + +static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO, show_in, NULL, 4, 0); +static SENSOR_DEVICE_ATTR_2(in4_min, S_IRUGO | S_IWUSR, show_in, set_in, + 4, 1); +static SENSOR_DEVICE_ATTR_2(in4_max, S_IRUGO | S_IWUSR, show_in, set_in, + 4, 2); + +static SENSOR_DEVICE_ATTR_2(in5_input, S_IRUGO, show_in, NULL, 5, 0); +static SENSOR_DEVICE_ATTR_2(in5_min, S_IRUGO | S_IWUSR, show_in, set_in, + 5, 1); +static SENSOR_DEVICE_ATTR_2(in5_max, S_IRUGO | S_IWUSR, show_in, set_in, + 5, 2); + +static SENSOR_DEVICE_ATTR_2(in6_input, S_IRUGO, show_in, NULL, 6, 0); +static SENSOR_DEVICE_ATTR_2(in6_min, S_IRUGO | S_IWUSR, show_in, set_in, + 6, 1); +static SENSOR_DEVICE_ATTR_2(in6_max, S_IRUGO | S_IWUSR, show_in, set_in, + 6, 2); + +static SENSOR_DEVICE_ATTR_2(in7_input, S_IRUGO, show_in, NULL, 7, 0); +static SENSOR_DEVICE_ATTR_2(in7_min, S_IRUGO | S_IWUSR, show_in, set_in, + 7, 1); +static SENSOR_DEVICE_ATTR_2(in7_max, S_IRUGO | S_IWUSR, show_in, set_in, + 7, 2); + +static SENSOR_DEVICE_ATTR_2(in8_input, S_IRUGO, show_in, NULL, 8, 0); /* 3 temperatures */ static ssize_t show_temp(struct device *dev, struct device_attribute *attr, @@ -2361,15 +2346,15 @@ static struct it87_data *it87_update_device(struct device *dev) it87_read_value(data, IT87_REG_CONFIG) | 0x40); } for (i = 0; i <= 7; i++) { - data->in[i] = + data->in[i][0] = it87_read_value(data, IT87_REG_VIN(i)); - data->in_min[i] = + data->in[i][1] = it87_read_value(data, IT87_REG_VIN_MIN(i)); - data->in_max[i] = + data->in[i][2] = it87_read_value(data, IT87_REG_VIN_MAX(i)); } /* in8 (battery) has no limit registers */ - data->in[8] = it87_read_value(data, IT87_REG_VIN(8)); + data->in[8][0] = it87_read_value(data, IT87_REG_VIN(8)); for (i = 0; i < 5; i++) { /* Skip disabled fans */ -- cgit v1.2.3 From 2cece01ffd622ab65a4f5a6704e3a74c1174d2fa Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 19 Dec 2012 22:17:01 +0100 Subject: hwmon: (it87) Replace macro defining tempX_type sensors with direct definitions The macro name show_sensor_offset is confusing since it related to the sensor type, not an offset - even more so when we introduce offset attributes later on. Replace it with direct definitions, and replace the show_sensor/set_sensor function names with show_temp_type/set_temp_type. This also resolves a checkpatch error. Signed-off-by: Guenter Roeck Signed-off-by: Jean Delvare --- drivers/hwmon/it87.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 79a1229d3499..21fb7f24152c 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -576,8 +576,8 @@ static SENSOR_DEVICE_ATTR_2(temp3_min, S_IRUGO | S_IWUSR, show_temp, set_temp, static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp, set_temp, 2, 2); -static ssize_t show_sensor(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t show_temp_type(struct device *dev, struct device_attribute *attr, + char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -590,8 +590,9 @@ static ssize_t show_sensor(struct device *dev, struct device_attribute *attr, return sprintf(buf, "4\n"); /* thermistor */ return sprintf(buf, "0\n"); /* disabled */ } -static ssize_t set_sensor(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) + +static ssize_t set_temp_type(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); int nr = sensor_attr->index; @@ -626,13 +627,13 @@ static ssize_t set_sensor(struct device *dev, struct device_attribute *attr, mutex_unlock(&data->update_lock); return count; } -#define show_sensor_offset(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \ - show_sensor, set_sensor, offset - 1); -show_sensor_offset(1); -show_sensor_offset(2); -show_sensor_offset(3); +static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO | S_IWUSR, show_temp_type, + set_temp_type, 0); +static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO | S_IWUSR, show_temp_type, + set_temp_type, 1); +static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR, show_temp_type, + set_temp_type, 2); /* 3 Fans */ -- cgit v1.2.3 From 161d898ac974818156afe48d755578bfd0d6e7c0 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 19 Dec 2012 22:17:01 +0100 Subject: hwmon: (it87) Introduce support for tempX_offset sysfs attribute Signed-off-by: Guenter Roeck Signed-off-by: Jean Delvare --- Documentation/hwmon/it87 | 9 +++++++ drivers/hwmon/it87.c | 66 ++++++++++++++++++++++++++++++++++++++++++++---- 2 files changed, 70 insertions(+), 5 deletions(-) diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index 87850d86c559..e1f38287fbb3 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -209,3 +209,12 @@ doesn't use CPU cycles. Trip points must be set properly before switching to automatic fan speed control mode. The driver will perform basic integrity checks before actually switching to automatic control mode. + + +Temperature offset attributes +----------------------------- + +The driver supports temp[1-3]_offset sysfs attributes to adjust the reported +temperature for thermal diodes or diode-connected thermal transistors. +If a temperature sensor is configured for thermistors, the attribute values +are ignored. diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 21fb7f24152c..767563269182 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -203,6 +203,8 @@ static const u8 IT87_REG_FAN[] = { 0x0d, 0x0e, 0x0f, 0x80, 0x82 }; static const u8 IT87_REG_FAN_MIN[] = { 0x10, 0x11, 0x12, 0x84, 0x86 }; static const u8 IT87_REG_FANX[] = { 0x18, 0x19, 0x1a, 0x81, 0x83 }; static const u8 IT87_REG_FANX_MIN[] = { 0x1b, 0x1c, 0x1d, 0x85, 0x87 }; +static const u8 IT87_REG_TEMP_OFFSET[] = { 0x56, 0x57, 0x59 }; + #define IT87_REG_FAN_MAIN_CTRL 0x13 #define IT87_REG_FAN_CTL 0x14 #define IT87_REG_PWM(nr) (0x15 + (nr)) @@ -263,7 +265,7 @@ struct it87_data { u16 fan[5]; /* Register values, possibly combined */ u16 fan_min[5]; /* Register values, possibly combined */ u8 has_temp; /* Bitfield, temp sensors enabled */ - s8 temp[3][3]; /* [nr][0]=temp, [1]=min, [2]=max */ + s8 temp[3][4]; /* [nr][0]=temp, [1]=min, [2]=max, [3]=offset */ u8 sensor; /* Register value */ u8 fan_div[3]; /* Register encoding, shifted right */ u8 vid; /* Register encoding, combined */ @@ -312,6 +314,17 @@ static inline int has_newer_autopwm(const struct it87_data *data) || data->type == it8728; } +static inline int has_temp_offset(const struct it87_data *data) +{ + return data->type == it8716 + || data->type == it8718 + || data->type == it8720 + || data->type == it8721 + || data->type == it8728 + || data->type == it8782 + || data->type == it8783; +} + static int adc_lsb(const struct it87_data *data, int nr) { int lsb = has_12mv_adc(data) ? 12 : 16; @@ -546,16 +559,34 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *attr, int index = sattr->index; struct it87_data *data = dev_get_drvdata(dev); long val; + u8 reg, regval; if (kstrtol(buf, 10, &val) < 0) return -EINVAL; mutex_lock(&data->update_lock); + + switch (index) { + default: + case 1: + reg = IT87_REG_TEMP_LOW(nr); + break; + case 2: + reg = IT87_REG_TEMP_HIGH(nr); + break; + case 3: + regval = it87_read_value(data, IT87_REG_BEEP_ENABLE); + if (!(regval & 0x80)) { + regval |= 0x80; + it87_write_value(data, IT87_REG_BEEP_ENABLE, regval); + } + data->valid = 0; + reg = IT87_REG_TEMP_OFFSET[nr]; + break; + } + data->temp[nr][index] = TEMP_TO_REG(val); - it87_write_value(data, - index == 1 ? IT87_REG_TEMP_LOW(nr) - : IT87_REG_TEMP_HIGH(nr), - data->temp[nr][index]); + it87_write_value(data, reg, data->temp[nr][index]); mutex_unlock(&data->update_lock); return count; } @@ -565,16 +596,22 @@ static SENSOR_DEVICE_ATTR_2(temp1_min, S_IRUGO | S_IWUSR, show_temp, set_temp, 0, 1); static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp, set_temp, 0, 2); +static SENSOR_DEVICE_ATTR_2(temp1_offset, S_IRUGO | S_IWUSR, show_temp, + set_temp, 0, 3); static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 1, 0); static SENSOR_DEVICE_ATTR_2(temp2_min, S_IRUGO | S_IWUSR, show_temp, set_temp, 1, 1); static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, set_temp, 1, 2); +static SENSOR_DEVICE_ATTR_2(temp2_offset, S_IRUGO | S_IWUSR, show_temp, + set_temp, 1, 3); static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 2, 0); static SENSOR_DEVICE_ATTR_2(temp3_min, S_IRUGO | S_IWUSR, show_temp, set_temp, 2, 1); static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp, set_temp, 2, 2); +static SENSOR_DEVICE_ATTR_2(temp3_offset, S_IRUGO | S_IWUSR, show_temp, + set_temp, 2, 3); static ssize_t show_temp_type(struct device *dev, struct device_attribute *attr, char *buf) @@ -1429,6 +1466,12 @@ static const struct attribute_group it87_group_temp[3] = { { .attrs = it87_attributes_temp[2] }, }; +static struct attribute *it87_attributes_temp_offset[] = { + &sensor_dev_attr_temp1_offset.dev_attr.attr, + &sensor_dev_attr_temp2_offset.dev_attr.attr, + &sensor_dev_attr_temp3_offset.dev_attr.attr, +}; + static struct attribute *it87_attributes[] = { &dev_attr_alarms.attr, &sensor_dev_attr_intrusion0_alarm.dev_attr.attr, @@ -1899,6 +1942,9 @@ static void it87_remove_files(struct device *dev) if (!(data->has_temp & (1 << i))) continue; sysfs_remove_group(&dev->kobj, &it87_group_temp[i]); + if (has_temp_offset(data)) + sysfs_remove_file(&dev->kobj, + it87_attributes_temp_offset[i]); if (sio_data->beep_pin) sysfs_remove_file(&dev->kobj, it87_attributes_temp_beep[i]); @@ -2026,6 +2072,12 @@ static int it87_probe(struct platform_device *pdev) err = sysfs_create_group(&dev->kobj, &it87_group_temp[i]); if (err) goto error; + if (has_temp_offset(data)) { + err = sysfs_create_file(&dev->kobj, + it87_attributes_temp_offset[i]); + if (err) + goto error; + } if (sio_data->beep_pin) { err = sysfs_create_file(&dev->kobj, it87_attributes_temp_beep[i]); @@ -2383,6 +2435,10 @@ static struct it87_data *it87_update_device(struct device *dev) it87_read_value(data, IT87_REG_TEMP_LOW(i)); data->temp[i][2] = it87_read_value(data, IT87_REG_TEMP_HIGH(i)); + if (has_temp_offset(data)) + data->temp[i][3] = + it87_read_value(data, + IT87_REG_TEMP_OFFSET[i]); } /* Newer chips don't have clock dividers */ -- cgit v1.2.3 From e1169ba0aea187d0ea15d6f98bc818cab37335e5 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 19 Dec 2012 22:17:01 +0100 Subject: hwmon: (it87) Save fan registers in 2-dimensional array Also unify fan functions to use the same code for 8 and 16 bit fans. This patch reduces code size by approximately 1,200 bytes on x86_64. Signed-off-by: Guenter Roeck Signed-off-by: Jean Delvare --- drivers/hwmon/it87.c | 263 ++++++++++++++++++++------------------------------- 1 file changed, 104 insertions(+), 159 deletions(-) diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 767563269182..e0d1910c04d9 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -262,8 +262,7 @@ struct it87_data { u16 in_scaled; /* Internal voltage sensors are scaled */ u8 in[9][3]; /* [nr][0]=in, [1]=min, [2]=max */ u8 has_fan; /* Bitfield, fans enabled */ - u16 fan[5]; /* Register values, possibly combined */ - u16 fan_min[5]; /* Register values, possibly combined */ + u16 fan[5][2]; /* Register values, [nr][0]=fan, [1]=min */ u8 has_temp; /* Bitfield, temp sensors enabled */ s8 temp[3][4]; /* [nr][0]=temp, [1]=min, [2]=max, [3]=offset */ u8 sensor; /* Register value */ @@ -687,25 +686,21 @@ static int pwm_mode(const struct it87_data *data, int nr) } static ssize_t show_fan(struct device *dev, struct device_attribute *attr, - char *buf) + char *buf) { - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + int nr = sattr->nr; + int index = sattr->index; + int speed; struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr], - DIV_FROM_REG(data->fan_div[nr]))); -} -static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr], - DIV_FROM_REG(data->fan_div[nr]))); + speed = has_16bit_fans(data) ? + FAN16_FROM_REG(data->fan[nr][index]) : + FAN_FROM_REG(data->fan[nr][index], + DIV_FROM_REG(data->fan_div[nr])); + return sprintf(buf, "%d\n", speed); } + static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr, char *buf) { @@ -742,11 +737,13 @@ static ssize_t show_pwm_freq(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%u\n", pwm_freq[index]); } -static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) + +static ssize_t set_fan(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + int nr = sattr->nr; + int index = sattr->index; struct it87_data *data = dev_get_drvdata(dev); long val; @@ -756,24 +753,36 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, return -EINVAL; mutex_lock(&data->update_lock); - reg = it87_read_value(data, IT87_REG_FAN_DIV); - switch (nr) { - case 0: - data->fan_div[nr] = reg & 0x07; - break; - case 1: - data->fan_div[nr] = (reg >> 3) & 0x07; - break; - case 2: - data->fan_div[nr] = (reg & 0x40) ? 3 : 1; - break; + + if (has_16bit_fans(data)) { + data->fan[nr][index] = FAN16_TO_REG(val); + it87_write_value(data, IT87_REG_FAN_MIN[nr], + data->fan[nr][index] & 0xff); + it87_write_value(data, IT87_REG_FANX_MIN[nr], + data->fan[nr][index] >> 8); + } else { + reg = it87_read_value(data, IT87_REG_FAN_DIV); + switch (nr) { + case 0: + data->fan_div[nr] = reg & 0x07; + break; + case 1: + data->fan_div[nr] = (reg >> 3) & 0x07; + break; + case 2: + data->fan_div[nr] = (reg & 0x40) ? 3 : 1; + break; + } + data->fan[nr][index] = + FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); + it87_write_value(data, IT87_REG_FAN_MIN[nr], + data->fan[nr][index]); } - data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); - it87_write_value(data, IT87_REG_FAN_MIN[nr], data->fan_min[nr]); mutex_unlock(&data->update_lock); return count; } + static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { @@ -792,7 +801,7 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, old = it87_read_value(data, IT87_REG_FAN_DIV); /* Save fan min limit */ - min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])); + min = FAN_FROM_REG(data->fan[nr][1], DIV_FROM_REG(data->fan_div[nr])); switch (nr) { case 0: @@ -813,8 +822,8 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, it87_write_value(data, IT87_REG_FAN_DIV, val); /* Restore fan min limit */ - data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); - it87_write_value(data, IT87_REG_FAN_MIN[nr], data->fan_min[nr]); + data->fan[nr][1] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); + it87_write_value(data, IT87_REG_FAN_MIN[nr], data->fan[nr][1]); mutex_unlock(&data->update_lock); return count; @@ -1087,17 +1096,31 @@ static ssize_t set_auto_temp(struct device *dev, return count; } -#define show_fan_offset(offset) \ -static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ - show_fan, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_min, set_fan_min, offset - 1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ - show_fan_div, set_fan_div, offset - 1); +static SENSOR_DEVICE_ATTR_2(fan1_input, S_IRUGO, show_fan, NULL, 0, 0); +static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO | S_IWUSR, show_fan, set_fan, + 0, 1); +static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, show_fan_div, + set_fan_div, 0); + +static SENSOR_DEVICE_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, 1, 0); +static SENSOR_DEVICE_ATTR_2(fan2_min, S_IRUGO | S_IWUSR, show_fan, set_fan, + 1, 1); +static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR, show_fan_div, + set_fan_div, 1); + +static SENSOR_DEVICE_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 2, 0); +static SENSOR_DEVICE_ATTR_2(fan3_min, S_IRUGO | S_IWUSR, show_fan, set_fan, + 2, 1); +static SENSOR_DEVICE_ATTR(fan3_div, S_IRUGO | S_IWUSR, show_fan_div, + set_fan_div, 2); + +static SENSOR_DEVICE_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 3, 0); +static SENSOR_DEVICE_ATTR_2(fan4_min, S_IRUGO | S_IWUSR, show_fan, set_fan, + 3, 1); -show_fan_offset(1); -show_fan_offset(2); -show_fan_offset(3); +static SENSOR_DEVICE_ATTR_2(fan5_input, S_IRUGO, show_fan, NULL, 4, 0); +static SENSOR_DEVICE_ATTR_2(fan5_min, S_IRUGO | S_IWUSR, show_fan, set_fan, + 4, 1); #define show_pwm_offset(offset) \ static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \ @@ -1141,65 +1164,6 @@ show_pwm_offset(1); show_pwm_offset(2); show_pwm_offset(3); -/* A different set of callbacks for 16-bit fans */ -static ssize_t show_fan16(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%d\n", FAN16_FROM_REG(data->fan[nr])); -} - -static ssize_t show_fan16_min(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%d\n", FAN16_FROM_REG(data->fan_min[nr])); -} - -static ssize_t set_fan16_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct it87_data *data = dev_get_drvdata(dev); - long val; - - if (kstrtol(buf, 10, &val) < 0) - return -EINVAL; - - mutex_lock(&data->update_lock); - data->fan_min[nr] = FAN16_TO_REG(val); - it87_write_value(data, IT87_REG_FAN_MIN[nr], - data->fan_min[nr] & 0xff); - it87_write_value(data, IT87_REG_FANX_MIN[nr], - data->fan_min[nr] >> 8); - mutex_unlock(&data->update_lock); - return count; -} - -/* - * We want to use the same sysfs file names as 8-bit fans, but we need - * different variable names, so we have to use SENSOR_ATTR instead of - * SENSOR_DEVICE_ATTR. - */ -#define show_fan16_offset(offset) \ -static struct sensor_device_attribute sensor_dev_attr_fan##offset##_input16 \ - = SENSOR_ATTR(fan##offset##_input, S_IRUGO, \ - show_fan16, NULL, offset - 1); \ -static struct sensor_device_attribute sensor_dev_attr_fan##offset##_min16 \ - = SENSOR_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan16_min, set_fan16_min, offset - 1) - -show_fan16_offset(1); -show_fan16_offset(2); -show_fan16_offset(3); -show_fan16_offset(4); -show_fan16_offset(5); - /* Alarms */ static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) @@ -1501,73 +1465,47 @@ static struct attribute *it87_attributes_temp_beep[] = { &sensor_dev_attr_temp3_beep.dev_attr.attr, }; -static struct attribute *it87_attributes_fan16[5][3+1] = { { - &sensor_dev_attr_fan1_input16.dev_attr.attr, - &sensor_dev_attr_fan1_min16.dev_attr.attr, +static struct attribute *it87_attributes_fan[5][3+1] = { { + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan1_min.dev_attr.attr, &sensor_dev_attr_fan1_alarm.dev_attr.attr, NULL }, { - &sensor_dev_attr_fan2_input16.dev_attr.attr, - &sensor_dev_attr_fan2_min16.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, &sensor_dev_attr_fan2_alarm.dev_attr.attr, NULL }, { - &sensor_dev_attr_fan3_input16.dev_attr.attr, - &sensor_dev_attr_fan3_min16.dev_attr.attr, + &sensor_dev_attr_fan3_input.dev_attr.attr, + &sensor_dev_attr_fan3_min.dev_attr.attr, &sensor_dev_attr_fan3_alarm.dev_attr.attr, NULL }, { - &sensor_dev_attr_fan4_input16.dev_attr.attr, - &sensor_dev_attr_fan4_min16.dev_attr.attr, + &sensor_dev_attr_fan4_input.dev_attr.attr, + &sensor_dev_attr_fan4_min.dev_attr.attr, &sensor_dev_attr_fan4_alarm.dev_attr.attr, NULL }, { - &sensor_dev_attr_fan5_input16.dev_attr.attr, - &sensor_dev_attr_fan5_min16.dev_attr.attr, + &sensor_dev_attr_fan5_input.dev_attr.attr, + &sensor_dev_attr_fan5_min.dev_attr.attr, &sensor_dev_attr_fan5_alarm.dev_attr.attr, NULL } }; -static const struct attribute_group it87_group_fan16[5] = { - { .attrs = it87_attributes_fan16[0] }, - { .attrs = it87_attributes_fan16[1] }, - { .attrs = it87_attributes_fan16[2] }, - { .attrs = it87_attributes_fan16[3] }, - { .attrs = it87_attributes_fan16[4] }, +static const struct attribute_group it87_group_fan[5] = { + { .attrs = it87_attributes_fan[0] }, + { .attrs = it87_attributes_fan[1] }, + { .attrs = it87_attributes_fan[2] }, + { .attrs = it87_attributes_fan[3] }, + { .attrs = it87_attributes_fan[4] }, }; -static struct attribute *it87_attributes_fan[3][4+1] = { { - &sensor_dev_attr_fan1_input.dev_attr.attr, - &sensor_dev_attr_fan1_min.dev_attr.attr, +static const struct attribute *it87_attributes_fan_div[] = { &sensor_dev_attr_fan1_div.dev_attr.attr, - &sensor_dev_attr_fan1_alarm.dev_attr.attr, - NULL -}, { - &sensor_dev_attr_fan2_input.dev_attr.attr, - &sensor_dev_attr_fan2_min.dev_attr.attr, &sensor_dev_attr_fan2_div.dev_attr.attr, - &sensor_dev_attr_fan2_alarm.dev_attr.attr, - NULL -}, { - &sensor_dev_attr_fan3_input.dev_attr.attr, - &sensor_dev_attr_fan3_min.dev_attr.attr, &sensor_dev_attr_fan3_div.dev_attr.attr, - &sensor_dev_attr_fan3_alarm.dev_attr.attr, - NULL -} }; - -static const struct attribute_group it87_group_fan[3] = { - { .attrs = it87_attributes_fan[0] }, - { .attrs = it87_attributes_fan[1] }, - { .attrs = it87_attributes_fan[2] }, }; -static const struct attribute_group * -it87_get_fan_group(const struct it87_data *data) -{ - return has_16bit_fans(data) ? it87_group_fan16 : it87_group_fan; -} - static struct attribute *it87_attributes_pwm[3][4+1] = { { &sensor_dev_attr_pwm1_enable.dev_attr.attr, &sensor_dev_attr_pwm1.dev_attr.attr, @@ -1926,7 +1864,6 @@ static void it87_remove_files(struct device *dev) { struct it87_data *data = platform_get_drvdata(pdev); struct it87_sio_data *sio_data = dev->platform_data; - const struct attribute_group *fan_group = it87_get_fan_group(data); int i; sysfs_remove_group(&dev->kobj, &it87_group); @@ -1952,10 +1889,13 @@ static void it87_remove_files(struct device *dev) for (i = 0; i < 5; i++) { if (!(data->has_fan & (1 << i))) continue; - sysfs_remove_group(&dev->kobj, &fan_group[i]); + sysfs_remove_group(&dev->kobj, &it87_group_fan[i]); if (sio_data->beep_pin) sysfs_remove_file(&dev->kobj, it87_attributes_fan_beep[i]); + if (i < 3 && !has_16bit_fans(data)) + sysfs_remove_file(&dev->kobj, + it87_attributes_fan_div[i]); } for (i = 0; i < 3; i++) { if (sio_data->skip_pwm & (1 << 0)) @@ -1976,7 +1916,6 @@ static int it87_probe(struct platform_device *pdev) struct resource *res; struct device *dev = &pdev->dev; struct it87_sio_data *sio_data = dev->platform_data; - const struct attribute_group *fan_group; int err = 0, i; int enable_pwm_interface; int fan_beep_need_rw; @@ -2087,15 +2026,21 @@ static int it87_probe(struct platform_device *pdev) } /* Do not create fan files for disabled fans */ - fan_group = it87_get_fan_group(data); fan_beep_need_rw = 1; for (i = 0; i < 5; i++) { if (!(data->has_fan & (1 << i))) continue; - err = sysfs_create_group(&dev->kobj, &fan_group[i]); + err = sysfs_create_group(&dev->kobj, &it87_group_fan[i]); if (err) goto error; + if (i < 3 && !has_16bit_fans(data)) { + err = sysfs_create_file(&dev->kobj, + it87_attributes_fan_div[i]); + if (err) + goto error; + } + if (sio_data->beep_pin) { err = sysfs_create_file(&dev->kobj, it87_attributes_fan_beep[i]); @@ -2414,15 +2359,15 @@ static struct it87_data *it87_update_device(struct device *dev) if (!(data->has_fan & (1 << i))) continue; - data->fan_min[i] = + data->fan[i][1] = it87_read_value(data, IT87_REG_FAN_MIN[i]); - data->fan[i] = it87_read_value(data, + data->fan[i][0] = it87_read_value(data, IT87_REG_FAN[i]); /* Add high byte if in 16-bit mode */ if (has_16bit_fans(data)) { - data->fan[i] |= it87_read_value(data, + data->fan[i][0] |= it87_read_value(data, IT87_REG_FANX[i]) << 8; - data->fan_min[i] |= it87_read_value(data, + data->fan[i][1] |= it87_read_value(data, IT87_REG_FANX_MIN[i]) << 8; } } -- cgit v1.2.3 From 1d9bcf6aef0af67901a54ad4c4458e6a2124b769 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 19 Dec 2012 22:17:01 +0100 Subject: hwmon: (it87) Avoid quoted string splits across lines Fix the respective checkpatch warnings. Signed-off-by: Guenter Roeck Signed-off-by: Jean Delvare --- drivers/hwmon/it87.c | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index e0d1910c04d9..28fbafccfe77 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -644,8 +644,8 @@ static ssize_t set_temp_type(struct device *dev, struct device_attribute *attr, reg &= ~(1 << nr); reg &= ~(8 << nr); if (val == 2) { /* backwards compatibility */ - dev_warn(dev, "Sensor type 2 is deprecated, please use 4 " - "instead\n"); + dev_warn(dev, + "Sensor type 2 is deprecated, please use 4 instead\n"); val = 4; } /* 3 = thermal diode; 4 = thermistor; 0 = disabled */ @@ -847,8 +847,8 @@ static int check_trip_points(struct device *dev, int nr) } if (err) { - dev_err(dev, "Inconsistent trip points, not switching to " - "automatic mode\n"); + dev_err(dev, + "Inconsistent trip points, not switching to automatic mode\n"); dev_err(dev, "Adjust the trip points and try again\n"); } return err; @@ -2176,8 +2176,8 @@ static int it87_check_pwm(struct device *dev) * PWM interface). */ if (!((pwm[0] | pwm[1] | pwm[2]) & 0x80)) { - dev_info(dev, "Reconfiguring PWM to " - "active high polarity\n"); + dev_info(dev, + "Reconfiguring PWM to active high polarity\n"); it87_write_value(data, IT87_REG_FAN_CTL, tmp | 0x87); for (i = 0; i < 3; i++) @@ -2187,16 +2187,16 @@ static int it87_check_pwm(struct device *dev) return 1; } - dev_info(dev, "PWM configuration is " - "too broken to be fixed\n"); + dev_info(dev, + "PWM configuration is too broken to be fixed\n"); } - dev_info(dev, "Detected broken BIOS " - "defaults, disabling PWM interface\n"); + dev_info(dev, + "Detected broken BIOS defaults, disabling PWM interface\n"); return 0; } else if (fix_pwm_polarity) { - dev_info(dev, "PWM configuration looks " - "sane, won't touch\n"); + dev_info(dev, + "PWM configuration looks sane, won't touch\n"); } return 1; @@ -2508,8 +2508,7 @@ static void __exit sm_it87_exit(void) } -MODULE_AUTHOR("Chris Gauthron, " - "Jean Delvare "); +MODULE_AUTHOR("Chris Gauthron, Jean Delvare "); MODULE_DESCRIPTION("IT8705F/IT871xF/IT872xF hardware monitoring driver"); module_param(update_vbat, bool, 0); MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value"); -- cgit v1.2.3 From c4458db3688a603a4cb4b1d01ca10ff0d58bc8eb Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 19 Dec 2012 22:17:02 +0100 Subject: hwmon: (it87) Replace pwm group macro with direct attribute definitions Fix checkpatch error: ERROR: Macros with multiple statements should be enclosed in a do - while loop Signed-off-by: Guenter Roeck Signed-off-by: Jean Delvare --- drivers/hwmon/it87.c | 115 +++++++++++++++++++++++++++++++++------------------ 1 file changed, 74 insertions(+), 41 deletions(-) diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 28fbafccfe77..59c147b9b976 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -1122,47 +1122,80 @@ static SENSOR_DEVICE_ATTR_2(fan5_input, S_IRUGO, show_fan, NULL, 4, 0); static SENSOR_DEVICE_ATTR_2(fan5_min, S_IRUGO | S_IWUSR, show_fan, set_fan, 4, 1); -#define show_pwm_offset(offset) \ -static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \ - show_pwm_enable, set_pwm_enable, offset - 1); \ -static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ - show_pwm, set_pwm, offset - 1); \ -static DEVICE_ATTR(pwm##offset##_freq, \ - (offset == 1 ? S_IRUGO | S_IWUSR : S_IRUGO), \ - show_pwm_freq, (offset == 1 ? set_pwm_freq : NULL)); \ -static SENSOR_DEVICE_ATTR(pwm##offset##_auto_channels_temp, \ - S_IRUGO | S_IWUSR, show_pwm_temp_map, set_pwm_temp_map, \ - offset - 1); \ -static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point1_pwm, \ - S_IRUGO | S_IWUSR, show_auto_pwm, set_auto_pwm, \ - offset - 1, 0); \ -static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point2_pwm, \ - S_IRUGO | S_IWUSR, show_auto_pwm, set_auto_pwm, \ - offset - 1, 1); \ -static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point3_pwm, \ - S_IRUGO | S_IWUSR, show_auto_pwm, set_auto_pwm, \ - offset - 1, 2); \ -static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point4_pwm, \ - S_IRUGO, show_auto_pwm, NULL, offset - 1, 3); \ -static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point1_temp, \ - S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp, \ - offset - 1, 1); \ -static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point1_temp_hyst, \ - S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp, \ - offset - 1, 0); \ -static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point2_temp, \ - S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp, \ - offset - 1, 2); \ -static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point3_temp, \ - S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp, \ - offset - 1, 3); \ -static SENSOR_DEVICE_ATTR_2(pwm##offset##_auto_point4_temp, \ - S_IRUGO | S_IWUSR, show_auto_temp, set_auto_temp, \ - offset - 1, 4); - -show_pwm_offset(1); -show_pwm_offset(2); -show_pwm_offset(3); +static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, + show_pwm_enable, set_pwm_enable, 0); +static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 0); +static DEVICE_ATTR(pwm1_freq, S_IRUGO | S_IWUSR, show_pwm_freq, set_pwm_freq); +static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IRUGO | S_IWUSR, + show_pwm_temp_map, set_pwm_temp_map, 0); +static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO | S_IWUSR, + show_auto_pwm, set_auto_pwm, 0, 0); +static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO | S_IWUSR, + show_auto_pwm, set_auto_pwm, 0, 1); +static SENSOR_DEVICE_ATTR_2(pwm1_auto_point3_pwm, S_IRUGO | S_IWUSR, + show_auto_pwm, set_auto_pwm, 0, 2); +static SENSOR_DEVICE_ATTR_2(pwm1_auto_point4_pwm, S_IRUGO, + show_auto_pwm, NULL, 0, 3); +static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_temp, S_IRUGO | S_IWUSR, + show_auto_temp, set_auto_temp, 0, 1); +static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_temp_hyst, S_IRUGO | S_IWUSR, + show_auto_temp, set_auto_temp, 0, 0); +static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_temp, S_IRUGO | S_IWUSR, + show_auto_temp, set_auto_temp, 0, 2); +static SENSOR_DEVICE_ATTR_2(pwm1_auto_point3_temp, S_IRUGO | S_IWUSR, + show_auto_temp, set_auto_temp, 0, 3); +static SENSOR_DEVICE_ATTR_2(pwm1_auto_point4_temp, S_IRUGO | S_IWUSR, + show_auto_temp, set_auto_temp, 0, 4); + +static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR, + show_pwm_enable, set_pwm_enable, 1); +static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 1); +static DEVICE_ATTR(pwm2_freq, S_IRUGO, show_pwm_freq, NULL); +static SENSOR_DEVICE_ATTR(pwm2_auto_channels_temp, S_IRUGO | S_IWUSR, + show_pwm_temp_map, set_pwm_temp_map, 1); +static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO | S_IWUSR, + show_auto_pwm, set_auto_pwm, 1, 0); +static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO | S_IWUSR, + show_auto_pwm, set_auto_pwm, 1, 1); +static SENSOR_DEVICE_ATTR_2(pwm2_auto_point3_pwm, S_IRUGO | S_IWUSR, + show_auto_pwm, set_auto_pwm, 1, 2); +static SENSOR_DEVICE_ATTR_2(pwm2_auto_point4_pwm, S_IRUGO, + show_auto_pwm, NULL, 1, 3); +static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_temp, S_IRUGO | S_IWUSR, + show_auto_temp, set_auto_temp, 1, 1); +static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_temp_hyst, S_IRUGO | S_IWUSR, + show_auto_temp, set_auto_temp, 1, 0); +static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_temp, S_IRUGO | S_IWUSR, + show_auto_temp, set_auto_temp, 1, 2); +static SENSOR_DEVICE_ATTR_2(pwm2_auto_point3_temp, S_IRUGO | S_IWUSR, + show_auto_temp, set_auto_temp, 1, 3); +static SENSOR_DEVICE_ATTR_2(pwm2_auto_point4_temp, S_IRUGO | S_IWUSR, + show_auto_temp, set_auto_temp, 1, 4); + +static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO | S_IWUSR, + show_pwm_enable, set_pwm_enable, 2); +static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 2); +static DEVICE_ATTR(pwm3_freq, S_IRUGO, show_pwm_freq, NULL); +static SENSOR_DEVICE_ATTR(pwm3_auto_channels_temp, S_IRUGO | S_IWUSR, + show_pwm_temp_map, set_pwm_temp_map, 2); +static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO | S_IWUSR, + show_auto_pwm, set_auto_pwm, 2, 0); +static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO | S_IWUSR, + show_auto_pwm, set_auto_pwm, 2, 1); +static SENSOR_DEVICE_ATTR_2(pwm3_auto_point3_pwm, S_IRUGO | S_IWUSR, + show_auto_pwm, set_auto_pwm, 2, 2); +static SENSOR_DEVICE_ATTR_2(pwm3_auto_point4_pwm, S_IRUGO, + show_auto_pwm, NULL, 2, 3); +static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_temp, S_IRUGO | S_IWUSR, + show_auto_temp, set_auto_temp, 2, 1); +static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_temp_hyst, S_IRUGO | S_IWUSR, + show_auto_temp, set_auto_temp, 2, 0); +static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_temp, S_IRUGO | S_IWUSR, + show_auto_temp, set_auto_temp, 2, 2); +static SENSOR_DEVICE_ATTR_2(pwm3_auto_point3_temp, S_IRUGO | S_IWUSR, + show_auto_temp, set_auto_temp, 2, 3); +static SENSOR_DEVICE_ATTR_2(pwm3_auto_point4_temp, S_IRUGO | S_IWUSR, + show_auto_temp, set_auto_temp, 2, 4); /* Alarms */ static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, -- cgit v1.2.3 From 483db43e81f4958e3cd11a990112e8082a6a5261 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 19 Dec 2012 22:17:02 +0100 Subject: hwmon: (it87) Manage device specific features with table This simplifies the code, improves runtime performance, reduces code size (about 280 bytes on x86_64), and makes it easier to add support for new devices. Signed-off-by: Guenter Roeck Signed-off-by: Jean Delvare --- drivers/hwmon/it87.c | 155 +++++++++++++++++++++++++++------------------------ 1 file changed, 81 insertions(+), 74 deletions(-) diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 59c147b9b976..e8fdc438df0a 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -228,6 +228,63 @@ static const u8 IT87_REG_TEMP_OFFSET[] = { 0x56, 0x57, 0x59 }; #define IT87_REG_AUTO_TEMP(nr, i) (0x60 + (nr) * 8 + (i)) #define IT87_REG_AUTO_PWM(nr, i) (0x65 + (nr) * 8 + (i)) +struct it87_devices { + const char *name; + u16 features; +}; + +#define FEAT_12MV_ADC (1 << 0) +#define FEAT_NEWER_AUTOPWM (1 << 1) +#define FEAT_OLD_AUTOPWM (1 << 2) +#define FEAT_16BIT_FANS (1 << 3) +#define FEAT_TEMP_OFFSET (1 << 4) + +static const struct it87_devices it87_devices[] = { + [it87] = { + .name = "it87", + .features = FEAT_OLD_AUTOPWM, /* may need to overwrite */ + }, + [it8712] = { + .name = "it8712", + .features = FEAT_OLD_AUTOPWM, /* may need to overwrite */ + }, + [it8716] = { + .name = "it8716", + .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET, + }, + [it8718] = { + .name = "it8718", + .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET, + }, + [it8720] = { + .name = "it8720", + .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET, + }, + [it8721] = { + .name = "it8721", + .features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS + | FEAT_TEMP_OFFSET, + }, + [it8728] = { + .name = "it8728", + .features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS + | FEAT_TEMP_OFFSET, + }, + [it8782] = { + .name = "it8782", + .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET, + }, + [it8783] = { + .name = "it8783", + .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET, + }, +}; + +#define has_16bit_fans(data) ((data)->features & FEAT_16BIT_FANS) +#define has_12mv_adc(data) ((data)->features & FEAT_12MV_ADC) +#define has_newer_autopwm(data) ((data)->features & FEAT_NEWER_AUTOPWM) +#define has_old_autopwm(data) ((data)->features & FEAT_OLD_AUTOPWM) +#define has_temp_offset(data) ((data)->features & FEAT_TEMP_OFFSET) struct it87_sio_data { enum chips type; @@ -251,7 +308,7 @@ struct it87_sio_data { struct it87_data { struct device *hwmon_dev; enum chips type; - u8 revision; + u16 features; unsigned short addr; const char *name; @@ -293,37 +350,6 @@ struct it87_data { s8 auto_temp[3][5]; /* [nr][0] is point1_temp_hyst */ }; -static inline int has_12mv_adc(const struct it87_data *data) -{ - /* - * IT8721F and later have a 12 mV ADC, also with internal scaling - * on selected inputs. - */ - return data->type == it8721 - || data->type == it8728; -} - -static inline int has_newer_autopwm(const struct it87_data *data) -{ - /* - * IT8721F and later have separate registers for the temperature - * mapping and the manual duty cycle. - */ - return data->type == it8721 - || data->type == it8728; -} - -static inline int has_temp_offset(const struct it87_data *data) -{ - return data->type == it8716 - || data->type == it8718 - || data->type == it8720 - || data->type == it8721 - || data->type == it8728 - || data->type == it8782 - || data->type == it8783; -} - static int adc_lsb(const struct it87_data *data, int nr) { int lsb = has_12mv_adc(data) ? 12 : 16; @@ -406,35 +432,6 @@ static const unsigned int pwm_freq[8] = { 750000 / 128, }; -static inline int has_16bit_fans(const struct it87_data *data) -{ - /* - * IT8705F Datasheet 0.4.1, 3h == Version G. - * IT8712F Datasheet 0.9.1, section 8.3.5 indicates 8h == Version J. - * These are the first revisions with 16-bit tachometer support. - */ - return (data->type == it87 && data->revision >= 0x03) - || (data->type == it8712 && data->revision >= 0x08) - || data->type == it8716 - || data->type == it8718 - || data->type == it8720 - || data->type == it8721 - || data->type == it8728 - || data->type == it8782 - || data->type == it8783; -} - -static inline int has_old_autopwm(const struct it87_data *data) -{ - /* - * The old automatic fan speed control interface is implemented - * by IT8705F chips up to revision F and IT8712F chips up to - * revision G. - */ - return (data->type == it87 && data->revision < 0x03) - || (data->type == it8712 && data->revision < 0x08); -} - static int it87_probe(struct platform_device *pdev); static int it87_remove(struct platform_device *pdev); @@ -1952,17 +1949,6 @@ static int it87_probe(struct platform_device *pdev) int err = 0, i; int enable_pwm_interface; int fan_beep_need_rw; - static const char * const names[] = { - "it87", - "it8712", - "it8716", - "it8718", - "it8720", - "it8721", - "it8728", - "it8782", - "it8783", - }; res = platform_get_resource(pdev, IORESOURCE_IO, 0); if (!devm_request_region(&pdev->dev, res->start, IT87_EC_EXTENT, @@ -1979,8 +1965,29 @@ static int it87_probe(struct platform_device *pdev) data->addr = res->start; data->type = sio_data->type; - data->revision = sio_data->revision; - data->name = names[sio_data->type]; + data->features = it87_devices[sio_data->type].features; + data->name = it87_devices[sio_data->type].name; + /* + * IT8705F Datasheet 0.4.1, 3h == Version G. + * IT8712F Datasheet 0.9.1, section 8.3.5 indicates 8h == Version J. + * These are the first revisions with 16-bit tachometer support. + */ + switch (data->type) { + case it87: + if (sio_data->revision >= 0x03) { + data->features &= ~FEAT_OLD_AUTOPWM; + data->features |= FEAT_16BIT_FANS; + } + break; + case it8712: + if (sio_data->revision >= 0x08) { + data->features &= ~FEAT_OLD_AUTOPWM; + data->features |= FEAT_16BIT_FANS; + } + break; + default: + break; + } /* Now, we do the remaining detection. */ if ((it87_read_value(data, IT87_REG_CONFIG) & 0x80) -- cgit v1.2.3 From 5d8d2f2bdbd0812dfad05ca37e4b28912fca7e33 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 19 Dec 2012 22:17:02 +0100 Subject: hwmon: (it87) Report thermal sensor type as Intel PECI if appropriate IT8721 and IT8728 support Intel PECI temperature reporting. Each sensor can be programmed to display the temperature reported on the PECI interface. If configured for Intel PECI, the driver reported the wrong sensor type for the respective thermal sensor. Fix the code to correctly report it as "Intel PECI (6)". Signed-off-by: Guenter Roeck Signed-off-by: Jean Delvare --- Documentation/hwmon/it87 | 3 ++- drivers/hwmon/it87.c | 20 +++++++++++++++++--- 2 files changed, 19 insertions(+), 4 deletions(-) diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index e1f38287fbb3..8386aadc0a82 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -217,4 +217,5 @@ Temperature offset attributes The driver supports temp[1-3]_offset sysfs attributes to adjust the reported temperature for thermal diodes or diode-connected thermal transistors. If a temperature sensor is configured for thermistors, the attribute values -are ignored. +are ignored. If the thermal sensor type is Intel PECI, the temperature offset +must be programmed to the critical CPU temperature. diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index e8fdc438df0a..3827aa9aa11e 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -231,6 +231,7 @@ static const u8 IT87_REG_TEMP_OFFSET[] = { 0x56, 0x57, 0x59 }; struct it87_devices { const char *name; u16 features; + u16 peci_mask; }; #define FEAT_12MV_ADC (1 << 0) @@ -238,6 +239,7 @@ struct it87_devices { #define FEAT_OLD_AUTOPWM (1 << 2) #define FEAT_16BIT_FANS (1 << 3) #define FEAT_TEMP_OFFSET (1 << 4) +#define FEAT_TEMP_PECI (1 << 5) static const struct it87_devices it87_devices[] = { [it87] = { @@ -263,12 +265,14 @@ static const struct it87_devices it87_devices[] = { [it8721] = { .name = "it8721", .features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS - | FEAT_TEMP_OFFSET, + | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI, + .peci_mask = 0x05, }, [it8728] = { .name = "it8728", .features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS - | FEAT_TEMP_OFFSET, + | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI, + .peci_mask = 0x07, }, [it8782] = { .name = "it8782", @@ -285,6 +289,8 @@ static const struct it87_devices it87_devices[] = { #define has_newer_autopwm(data) ((data)->features & FEAT_NEWER_AUTOPWM) #define has_old_autopwm(data) ((data)->features & FEAT_OLD_AUTOPWM) #define has_temp_offset(data) ((data)->features & FEAT_TEMP_OFFSET) +#define has_temp_peci(data, nr) (((data)->features & FEAT_TEMP_PECI) && \ + ((data)->peci_mask & (1 << nr))) struct it87_sio_data { enum chips type; @@ -309,6 +315,7 @@ struct it87_data { struct device *hwmon_dev; enum chips type; u16 features; + u16 peci_mask; unsigned short addr; const char *name; @@ -617,6 +624,8 @@ static ssize_t show_temp_type(struct device *dev, struct device_attribute *attr, struct it87_data *data = it87_update_device(dev); u8 reg = data->sensor; /* In case value is updated while used */ + if (has_temp_peci(data, nr) && (reg >> 6 == nr + 1)) + return sprintf(buf, "6\n"); /* Intel PECI */ if (reg & (1 << nr)) return sprintf(buf, "3\n"); /* thermal diode */ if (reg & (8 << nr)) @@ -640,16 +649,20 @@ static ssize_t set_temp_type(struct device *dev, struct device_attribute *attr, reg = it87_read_value(data, IT87_REG_TEMP_ENABLE); reg &= ~(1 << nr); reg &= ~(8 << nr); + if (has_temp_peci(data, nr) && (reg >> 6 == nr + 1 || val == 6)) + reg &= 0x3f; if (val == 2) { /* backwards compatibility */ dev_warn(dev, "Sensor type 2 is deprecated, please use 4 instead\n"); val = 4; } - /* 3 = thermal diode; 4 = thermistor; 0 = disabled */ + /* 3 = thermal diode; 4 = thermistor; 6 = Intel PECI; 0 = disabled */ if (val == 3) reg |= 1 << nr; else if (val == 4) reg |= 8 << nr; + else if (has_temp_peci(data, nr) && val == 6) + reg |= (nr + 1) << 6; else if (val != 0) return -EINVAL; @@ -1966,6 +1979,7 @@ static int it87_probe(struct platform_device *pdev) data->addr = res->start; data->type = sio_data->type; data->features = it87_devices[sio_data->type].features; + data->peci_mask = it87_devices[sio_data->type].peci_mask; data->name = it87_devices[sio_data->type].name; /* * IT8705F Datasheet 0.4.1, 3h == Version G. -- cgit v1.2.3 From 19529784785d8fd164079e1008c8b1970d6062ee Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 19 Dec 2012 22:17:02 +0100 Subject: hwmon: (it87) Support PECI for additional chips Extend support for reporting and selecting PECI temperature sensors to IT8718, IT8720, IT8782, and IT8783. For IT8721, report the sensor type for temp2 as Intel PECI (6) if the chip is configured to report the PCH temperature. Signed-off-by: Guenter Roeck Signed-off-by: Jean Delvare --- drivers/hwmon/it87.c | 48 ++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 38 insertions(+), 10 deletions(-) diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 3827aa9aa11e..117d66fcded6 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -231,7 +231,8 @@ static const u8 IT87_REG_TEMP_OFFSET[] = { 0x56, 0x57, 0x59 }; struct it87_devices { const char *name; u16 features; - u16 peci_mask; + u8 peci_mask; + u8 old_peci_mask; }; #define FEAT_12MV_ADC (1 << 0) @@ -240,6 +241,7 @@ struct it87_devices { #define FEAT_16BIT_FANS (1 << 3) #define FEAT_TEMP_OFFSET (1 << 4) #define FEAT_TEMP_PECI (1 << 5) +#define FEAT_TEMP_OLD_PECI (1 << 6) static const struct it87_devices it87_devices[] = { [it87] = { @@ -256,17 +258,22 @@ static const struct it87_devices it87_devices[] = { }, [it8718] = { .name = "it8718", - .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET, + .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET + | FEAT_TEMP_OLD_PECI, + .old_peci_mask = 0x4, }, [it8720] = { .name = "it8720", - .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET, + .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET + | FEAT_TEMP_OLD_PECI, + .old_peci_mask = 0x4, }, [it8721] = { .name = "it8721", .features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS - | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI, + | FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI, .peci_mask = 0x05, + .old_peci_mask = 0x02, /* Actually reports PCH */ }, [it8728] = { .name = "it8728", @@ -276,11 +283,15 @@ static const struct it87_devices it87_devices[] = { }, [it8782] = { .name = "it8782", - .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET, + .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET + | FEAT_TEMP_OLD_PECI, + .old_peci_mask = 0x4, }, [it8783] = { .name = "it8783", - .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET, + .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET + | FEAT_TEMP_OLD_PECI, + .old_peci_mask = 0x4, }, }; @@ -291,6 +302,9 @@ static const struct it87_devices it87_devices[] = { #define has_temp_offset(data) ((data)->features & FEAT_TEMP_OFFSET) #define has_temp_peci(data, nr) (((data)->features & FEAT_TEMP_PECI) && \ ((data)->peci_mask & (1 << nr))) +#define has_temp_old_peci(data, nr) \ + (((data)->features & FEAT_TEMP_OLD_PECI) && \ + ((data)->old_peci_mask & (1 << nr))) struct it87_sio_data { enum chips type; @@ -315,7 +329,8 @@ struct it87_data { struct device *hwmon_dev; enum chips type; u16 features; - u16 peci_mask; + u8 peci_mask; + u8 old_peci_mask; unsigned short addr; const char *name; @@ -329,7 +344,8 @@ struct it87_data { u16 fan[5][2]; /* Register values, [nr][0]=fan, [1]=min */ u8 has_temp; /* Bitfield, temp sensors enabled */ s8 temp[3][4]; /* [nr][0]=temp, [1]=min, [2]=max, [3]=offset */ - u8 sensor; /* Register value */ + u8 sensor; /* Register value (IT87_REG_TEMP_ENABLE) */ + u8 extra; /* Register value (IT87_REG_TEMP_EXTRA) */ u8 fan_div[3]; /* Register encoding, shifted right */ u8 vid; /* Register encoding, combined */ u8 vrm; @@ -623,8 +639,10 @@ static ssize_t show_temp_type(struct device *dev, struct device_attribute *attr, int nr = sensor_attr->index; struct it87_data *data = it87_update_device(dev); u8 reg = data->sensor; /* In case value is updated while used */ + u8 extra = data->extra; - if (has_temp_peci(data, nr) && (reg >> 6 == nr + 1)) + if ((has_temp_peci(data, nr) && (reg >> 6 == nr + 1)) + || (has_temp_old_peci(data, nr) && (extra & 0x80))) return sprintf(buf, "6\n"); /* Intel PECI */ if (reg & (1 << nr)) return sprintf(buf, "3\n"); /* thermal diode */ @@ -641,7 +659,7 @@ static ssize_t set_temp_type(struct device *dev, struct device_attribute *attr, struct it87_data *data = dev_get_drvdata(dev); long val; - u8 reg; + u8 reg, extra; if (kstrtol(buf, 10, &val) < 0) return -EINVAL; @@ -651,6 +669,9 @@ static ssize_t set_temp_type(struct device *dev, struct device_attribute *attr, reg &= ~(8 << nr); if (has_temp_peci(data, nr) && (reg >> 6 == nr + 1 || val == 6)) reg &= 0x3f; + extra = it87_read_value(data, IT87_REG_TEMP_EXTRA); + if (has_temp_old_peci(data, nr) && ((extra & 0x80) || val == 6)) + extra &= 0x7f; if (val == 2) { /* backwards compatibility */ dev_warn(dev, "Sensor type 2 is deprecated, please use 4 instead\n"); @@ -663,12 +684,17 @@ static ssize_t set_temp_type(struct device *dev, struct device_attribute *attr, reg |= 8 << nr; else if (has_temp_peci(data, nr) && val == 6) reg |= (nr + 1) << 6; + else if (has_temp_old_peci(data, nr) && val == 6) + extra |= 0x80; else if (val != 0) return -EINVAL; mutex_lock(&data->update_lock); data->sensor = reg; + data->extra = extra; it87_write_value(data, IT87_REG_TEMP_ENABLE, data->sensor); + if (has_temp_old_peci(data, nr)) + it87_write_value(data, IT87_REG_TEMP_EXTRA, data->extra); data->valid = 0; /* Force cache refresh */ mutex_unlock(&data->update_lock); return count; @@ -1980,6 +2006,7 @@ static int it87_probe(struct platform_device *pdev) data->type = sio_data->type; data->features = it87_devices[sio_data->type].features; data->peci_mask = it87_devices[sio_data->type].peci_mask; + data->old_peci_mask = it87_devices[sio_data->type].old_peci_mask; data->name = it87_devices[sio_data->type].name; /* * IT8705F Datasheet 0.4.1, 3h == Version G. @@ -2461,6 +2488,7 @@ static struct it87_data *it87_update_device(struct device *dev) it87_update_pwm_ctrl(data, i); data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE); + data->extra = it87_read_value(data, IT87_REG_TEMP_EXTRA); /* * The IT8705F does not have VID capability. * The IT8718F and later don't use IT87_REG_VID for the -- cgit v1.2.3 From c8ecd27da78aea184aac37df0cd0ccd2a6d0e378 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 19 Dec 2012 22:17:02 +0100 Subject: hwmon-vid: Add support for AMD family 11h to 15h processors Since family 11h processors, AMD is exclusively using 7-bit VID codes transmitted using a serial protocol over two pins (clock and data.) Signed-off-by: Jean Delvare Tested-by: David Hubbard Reviewed-by: Guenter Roeck --- drivers/hwmon/hwmon-vid.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c index 9f26400713f0..89cfd64b3373 100644 --- a/drivers/hwmon/hwmon-vid.c +++ b/drivers/hwmon/hwmon-vid.c @@ -115,6 +115,12 @@ int vid_from_reg(int val, u8 vrm) return (val < 32) ? 1550 - 25 * val : 775 - (25 * (val - 31)) / 2; + case 26: /* AMD family 10h to 15h, serial VID */ + val &= 0x7f; + if (val >= 0x7c) + return 0; + return DIV_ROUND_CLOSEST(15500 - 125 * val, 10); + case 91: /* VRM 9.1 */ case 90: /* VRM 9.0 */ val &= 0x1f; @@ -195,6 +201,10 @@ static struct vrm_model vrm_models[] = { {X86_VENDOR_AMD, 0xF, 0x40, 0x7F, ANY, 24}, /* NPT family 0Fh */ {X86_VENDOR_AMD, 0xF, 0x80, ANY, ANY, 25}, /* future fam. 0Fh */ {X86_VENDOR_AMD, 0x10, 0x0, ANY, ANY, 25}, /* NPT family 10h */ + {X86_VENDOR_AMD, 0x11, 0x0, ANY, ANY, 26}, /* family 11h */ + {X86_VENDOR_AMD, 0x12, 0x0, ANY, ANY, 26}, /* family 12h */ + {X86_VENDOR_AMD, 0x14, 0x0, ANY, ANY, 26}, /* family 14h */ + {X86_VENDOR_AMD, 0x15, 0x0, ANY, ANY, 26}, /* family 15h */ {X86_VENDOR_INTEL, 0x6, 0x0, 0x6, ANY, 82}, /* Pentium Pro, * Pentium II, Xeon, -- cgit v1.2.3