From 83d2aed4440c47acc813abeac4acf4390cb40a8c Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Tue, 15 Jan 2019 15:18:56 +1100 Subject: scsi/atari_scsi: Don't select CONFIG_NVRAM On powerpc, setting CONFIG_NVRAM=n builds a kernel with no NVRAM support. Setting CONFIG_NVRAM=m enables the /dev/nvram misc device module without enabling NVRAM support in drivers. Setting CONFIG_NVRAM=y enables the misc device (built-in) and also enables NVRAM support in drivers. m68k shares the valkyriefb driver with powerpc, and since that driver uses NVRAM, it is affected by CONFIG_ATARI_SCSI, because of the use of "select NVRAM". We can avoid the "select" here, but drivers still have to interpret the CONFIG_NVRAM symbol consistently regardless of platform. In this patch and the subsequent fbdev driver patch, the convention is adopted across all relevant platforms whereby NVRAM functionality gets enabled in a given device driver when the nvram misc device is built-in or when both drivers are modules. Acked-by: Michael Schmitz Signed-off-by: Finn Thain Signed-off-by: Greg Kroah-Hartman --- drivers/char/Kconfig | 5 +---- drivers/scsi/Kconfig | 6 +++--- drivers/scsi/atari_scsi.c | 2 +- 3 files changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 2e2ffe7010aa..a8cac68de177 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -244,7 +244,7 @@ source "drivers/char/hw_random/Kconfig" config NVRAM tristate "/dev/nvram support" - depends on ATARI || X86 || GENERIC_NVRAM + depends on X86 || GENERIC_NVRAM ---help--- If you say Y here and create a character special file /dev/nvram with major number 10 and minor number 144 using mknod ("man mknod"), @@ -262,9 +262,6 @@ config NVRAM should NEVER idly tamper with it. See Ralf Brown's interrupt list for a guide to the use of CMOS bytes by your BIOS. - On Atari machines, /dev/nvram is always configured and does not need - to be selected. - To compile this driver as a module, choose M here: the module will be called nvram. diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index f38882f6f37d..8f9d9e9fa695 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1369,14 +1369,14 @@ config ATARI_SCSI tristate "Atari native SCSI support" depends on ATARI && SCSI select SCSI_SPI_ATTRS - select NVRAM ---help--- If you have an Atari with built-in NCR5380 SCSI controller (TT, Falcon, ...) say Y to get it supported. Of course also, if you have a compatible SCSI controller (e.g. for Medusa). - To compile this driver as a module, choose M here: the - module will be called atari_scsi. + To compile this driver as a module, choose M here: the module will + be called atari_scsi. If you also enable NVRAM support, the SCSI + host's ID is taken from the setting in TT RTC NVRAM. This driver supports both styles of NCR integration into the system: the TT style (separate DMA), and the Falcon style (via diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c index a503dc50c4f8..78b43200c99e 100644 --- a/drivers/scsi/atari_scsi.c +++ b/drivers/scsi/atari_scsi.c @@ -757,7 +757,7 @@ static int __init atari_scsi_probe(struct platform_device *pdev) if (setup_hostid >= 0) { atari_scsi_template.this_id = setup_hostid & 7; - } else { + } else if (IS_REACHABLE(CONFIG_NVRAM)) { /* Test if a host id is set in the NVRam */ if (ATARIHW_PRESENT(TT_CLK) && nvram_check_checksum()) { unsigned char b = nvram_read_byte(16); -- cgit v1.2.3