From 71cc2c2152170b8166f59abb0604dc62073aeb92 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 30 Apr 2008 00:55:10 -0700 Subject: serial: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/68360serial.c | 4 ++-- drivers/serial/8250_early.c | 2 +- drivers/serial/bfin_5xx.c | 4 ++-- drivers/serial/cpm_uart/cpm_uart_core.c | 2 +- drivers/serial/crisv10.c | 8 ++++---- drivers/serial/ioc3_serial.c | 36 ++++++++++++++++----------------- drivers/serial/ioc4_serial.c | 32 ++++++++++++++--------------- drivers/serial/s3c2410.c | 6 +++--- drivers/serial/sa1100.c | 4 ++-- drivers/serial/sh-sci.c | 2 +- drivers/serial/sn_console.c | 2 +- drivers/serial/uartlite.c | 2 +- drivers/serial/ucc_uart.c | 4 ++-- 13 files changed, 54 insertions(+), 54 deletions(-) diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c index 4714bd697af2..d9d4e9552a4d 100644 --- a/drivers/serial/68360serial.c +++ b/drivers/serial/68360serial.c @@ -1247,7 +1247,7 @@ static int rs_360_tiocmget(struct tty_struct *tty, struct file *file) #ifdef modem_control unsigned char control, status; - if (serial_paranoia_check(info, tty->name, __FUNCTION__)) + if (serial_paranoia_check(info, tty->name, __func__)) return -ENODEV; if (tty->flags & (1 << TTY_IO_ERROR)) @@ -1278,7 +1278,7 @@ static int rs_360_tiocmset(struct tty_struct *tty, struct file *file, ser_info_t *info = (ser_info_t *)tty->driver_data; unsigned int arg; - if (serial_paranoia_check(info, tty->name, __FUNCTION__)) + if (serial_paranoia_check(info, tty->name, __func__)) return -ENODEV; if (tty->flags & (1 << TTY_IO_ERROR)) diff --git a/drivers/serial/8250_early.c b/drivers/serial/8250_early.c index 38776e8b064b..cd898704ba4f 100644 --- a/drivers/serial/8250_early.c +++ b/drivers/serial/8250_early.c @@ -156,7 +156,7 @@ static int __init parse_options(struct early_serial8250_device *device, port->membase = ioremap(port->mapbase, 64); if (!port->membase) { printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n", - __FUNCTION__, + __func__, (unsigned long long)port->mapbase); return -ENOMEM; } diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 5f55534a290b..8a2f6a1baa74 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -762,7 +762,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, break; default: printk(KERN_ERR "%s: word lengh not supported\n", - __FUNCTION__); + __func__); } if (termios->c_cflag & CSTOPB) @@ -1029,7 +1029,7 @@ bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud, *baud = get_sclk() / (16*(dll | dlh << 8)); } - pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __FUNCTION__, *baud, *parity, *bits); + pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __func__, *baud, *parity, *bits); } #endif diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index a638ba0679ac..a19dc7ef8861 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -1117,7 +1117,7 @@ int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con) line = cpm_uart_id2nr(idx); if(line < 0) { - printk(KERN_ERR"%s(): port %d is not registered", __FUNCTION__, idx); + printk(KERN_ERR"%s(): port %d is not registered", __func__, idx); return -EINVAL; } diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index 8b9af73c1d59..f9fa237aa949 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -1788,7 +1788,7 @@ static unsigned int handle_descr_data(struct e100_serial *info, if (info->recv_cnt + recvl > 65536) { printk(KERN_CRIT - "%s: Too much pending incoming serial data! Dropping %u bytes.\n", __FUNCTION__, recvl); + "%s: Too much pending incoming serial data! Dropping %u bytes.\n", __func__, recvl); return 0; } @@ -1801,7 +1801,7 @@ static unsigned int handle_descr_data(struct e100_serial *info, append_recv_buffer(info, buffer); if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE))) - panic("%s: Failed to allocate memory for receive buffer!\n", __FUNCTION__); + panic("%s: Failed to allocate memory for receive buffer!\n", __func__); descr->buf = virt_to_phys(buffer->buffer); @@ -1925,7 +1925,7 @@ static int start_recv_dma(struct e100_serial *info) /* Set up the receiving descriptors */ for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) { if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE))) - panic("%s: Failed to allocate memory for receive buffer!\n", __FUNCTION__); + panic("%s: Failed to allocate memory for receive buffer!\n", __func__); descr[i].ctrl = d_int; descr[i].buf = virt_to_phys(buffer->buffer); @@ -4519,7 +4519,7 @@ rs_init(void) if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial ", driver)) - panic("%s: Failed to request irq8", __FUNCTION__); + panic("%s: Failed to request irq8", __func__); #endif #endif /* CONFIG_SVINTO_SIM */ diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c index 168073f12cec..4f1af71e9a1b 100644 --- a/drivers/serial/ioc3_serial.c +++ b/drivers/serial/ioc3_serial.c @@ -52,7 +52,7 @@ static unsigned int Submodule_slot; #define DPRINT_CONFIG(_x...) ; //#define DPRINT_CONFIG(_x...) printk _x #define NOT_PROGRESS() ; -//#define NOT_PROGRESS() printk("%s : fails %d\n", __FUNCTION__, __LINE__) +//#define NOT_PROGRESS() printk("%s : fails %d\n", __func__, __LINE__) /* number of characters we want to transmit to the lower level at a time */ #define MAX_CHARS 256 @@ -445,7 +445,7 @@ static int inline port_init(struct ioc3_port *port) sbbr_h = &idd->vma->sbbr_h; ring_pci_addr = (unsigned long __iomem)port->ip_dma_ringbuf; DPRINT_CONFIG(("%s: ring_pci_addr 0x%p\n", - __FUNCTION__, (void *)ring_pci_addr)); + __func__, (void *)ring_pci_addr)); writel((unsigned int)((uint64_t) ring_pci_addr >> 32), sbbr_h); writel((unsigned int)ring_pci_addr | BUF_SIZE_BIT, sbbr_l); @@ -593,7 +593,7 @@ config_port(struct ioc3_port *port, DPRINT_CONFIG(("%s: line %d baud %d byte_size %d stop %d parenb %d " "parodd %d\n", - __FUNCTION__, ((struct uart_port *)port->ip_port)->line, + __func__, ((struct uart_port *)port->ip_port)->line, baud, byte_size, stop_bits, parenb, parodd)); if (set_baud(port, baud)) @@ -871,14 +871,14 @@ static int ioc3_set_proto(struct ioc3_port *port, int proto) default: case PROTO_RS232: /* Clear the appropriate GIO pin */ - DPRINT_CONFIG(("%s: rs232\n", __FUNCTION__)); + DPRINT_CONFIG(("%s: rs232\n", __func__)); writel(0, (&port->ip_idd->vma->gppr[0] + hooks->rs422_select_pin)); break; case PROTO_RS422: /* Set the appropriate GIO pin */ - DPRINT_CONFIG(("%s: rs422\n", __FUNCTION__)); + DPRINT_CONFIG(("%s: rs422\n", __func__)); writel(1, (&port->ip_idd->vma->gppr[0] + hooks->rs422_select_pin)); break; @@ -988,7 +988,7 @@ ioc3_change_speed(struct uart_port *the_port, } baud = uart_get_baud_rate(the_port, new_termios, old_termios, MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED); - DPRINT_CONFIG(("%s: returned baud %d for line %d\n", __FUNCTION__, baud, + DPRINT_CONFIG(("%s: returned baud %d for line %d\n", __func__, baud, the_port->line)); if (!the_port->fifosize) @@ -1026,7 +1026,7 @@ ioc3_change_speed(struct uart_port *the_port, DPRINT_CONFIG(("%s : port 0x%p line %d cflag 0%o " "config_port(baud %d data %d stop %d penable %d " " parity %d), notification 0x%x\n", - __FUNCTION__, (void *)port, the_port->line, cflag, baud, + __func__, (void *)port, the_port->line, cflag, baud, new_data, new_stop, new_parity_enable, new_parity, the_port->ignore_status_mask)); @@ -1919,7 +1919,7 @@ static inline int ioc3_serial_core_attach( struct ioc3_submodule *is, struct pci_dev *pdev = idd->pdev; DPRINT_CONFIG(("%s: attach pdev 0x%p - card_ptr 0x%p\n", - __FUNCTION__, pdev, (void *)card_ptr)); + __func__, pdev, (void *)card_ptr)); if (!card_ptr) return -ENODEV; @@ -1933,7 +1933,7 @@ static inline int ioc3_serial_core_attach( struct ioc3_submodule *is, port->ip_port = the_port; DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p [%d/%d]\n", - __FUNCTION__, (void *)the_port, (void *)port, + __func__, (void *)the_port, (void *)port, phys_port, ii)); /* membase, iobase and mapbase just need to be non-0 */ @@ -1950,7 +1950,7 @@ static inline int ioc3_serial_core_attach( struct ioc3_submodule *is, if (uart_add_one_port(&ioc3_uart, the_port) < 0) { printk(KERN_WARNING "%s: unable to add port %d bus %d\n", - __FUNCTION__, the_port->line, pdev->bus->number); + __func__, the_port->line, pdev->bus->number); } else { DPRINT_CONFIG(("IOC3 serial port %d irq %d bus %d\n", the_port->line, the_port->irq, pdev->bus->number)); @@ -2017,7 +2017,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd) struct ioc3_port *ports[PORTS_PER_CARD]; int phys_port; - DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, is, idd)); + DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __func__, is, idd)); card_ptr = kzalloc(sizeof(struct ioc3_card), GFP_KERNEL); if (!card_ptr) { @@ -2067,7 +2067,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd) DPRINT_CONFIG(("%s : Port A ip_serial_regs 0x%p " "ip_uart_regs 0x%p\n", - __FUNCTION__, + __func__, (void *)port->ip_serial_regs, (void *)port->ip_uart_regs)); @@ -2082,7 +2082,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd) DPRINT_CONFIG(("%s : Port A ip_cpu_ringbuf 0x%p " "ip_dma_ringbuf 0x%p, ip_inring 0x%p " "ip_outring 0x%p\n", - __FUNCTION__, + __func__, (void *)port->ip_cpu_ringbuf, (void *)port->ip_dma_ringbuf, (void *)port->ip_inring, @@ -2094,7 +2094,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd) DPRINT_CONFIG(("%s : Port B ip_serial_regs 0x%p " "ip_uart_regs 0x%p\n", - __FUNCTION__, + __func__, (void *)port->ip_serial_regs, (void *)port->ip_uart_regs)); @@ -2108,7 +2108,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd) DPRINT_CONFIG(("%s : Port B ip_cpu_ringbuf 0x%p " "ip_dma_ringbuf 0x%p, ip_inring 0x%p " "ip_outring 0x%p\n", - __FUNCTION__, + __func__, (void *)port->ip_cpu_ringbuf, (void *)port->ip_dma_ringbuf, (void *)port->ip_inring, @@ -2116,7 +2116,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd) } DPRINT_CONFIG(("%s : port %d [addr 0x%p] card_ptr 0x%p", - __FUNCTION__, + __func__, phys_port, (void *)port, (void *)card_ptr)); DPRINT_CONFIG((" ip_serial_regs 0x%p ip_uart_regs 0x%p\n", (void *)port->ip_serial_regs, @@ -2127,7 +2127,7 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd) DPRINT_CONFIG(("%s: phys_port %d port 0x%p inring 0x%p " "outring 0x%p\n", - __FUNCTION__, + __func__, phys_port, (void *)port, (void *)port->ip_inring, (void *)port->ip_outring)); @@ -2170,7 +2170,7 @@ static int __devinit ioc3uart_init(void) if ((ret = uart_register_driver(&ioc3_uart)) < 0) { printk(KERN_WARNING "%s: Couldn't register IOC3 uart serial driver\n", - __FUNCTION__); + __func__); return ret; } ret = ioc3_register_submodule(&ioc3uart_submodule); diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c index 0c179384fb0c..49b8a82b7b9f 100644 --- a/drivers/serial/ioc4_serial.c +++ b/drivers/serial/ioc4_serial.c @@ -889,7 +889,7 @@ static int inline port_init(struct ioc4_port *port) ring_pci_addr = (unsigned long __iomem)port->ip_dma_ringbuf; DPRINT_CONFIG(("%s: ring_pci_addr 0x%lx\n", - __FUNCTION__, ring_pci_addr)); + __func__, ring_pci_addr)); writel((unsigned int)((uint64_t)ring_pci_addr >> 32), sbbr_h); writel((unsigned int)ring_pci_addr | IOC4_BUF_SIZE_BIT, sbbr_l); @@ -1028,7 +1028,7 @@ static irqreturn_t ioc4_intr(int irq, void *arg) spin_lock_irqsave(&soft->is_ir_lock, flag); printk ("%s : %d : mem 0x%p sio_ir 0x%x sio_ies 0x%x " "other_ir 0x%x other_ies 0x%x mask 0x%x\n", - __FUNCTION__, __LINE__, + __func__, __LINE__, (void *)mem, readl(&mem->sio_ir.raw), readl(&mem->sio_ies.raw), readl(&mem->other_ir.raw), @@ -1155,14 +1155,14 @@ static int inline ioc4_attach_local(struct ioc4_driver_data *idd) (TOTAL_RING_BUF_SIZE - 1)) == 0)); DPRINT_CONFIG(("%s : ip_cpu_ringbuf 0x%p " "ip_dma_ringbuf 0x%p\n", - __FUNCTION__, + __func__, (void *)port->ip_cpu_ringbuf, (void *)port->ip_dma_ringbuf)); port->ip_inring = RING(port, RX_0_OR_2); port->ip_outring = RING(port, TX_0_OR_2); } DPRINT_CONFIG(("%s : port %d [addr 0x%p] control 0x%p", - __FUNCTION__, + __func__, port_number, (void *)port, (void *)control)); DPRINT_CONFIG((" ip_serial_regs 0x%p ip_uart_regs 0x%p\n", (void *)port->ip_serial_regs, @@ -1173,7 +1173,7 @@ static int inline ioc4_attach_local(struct ioc4_driver_data *idd) DPRINT_CONFIG(("%s: port_number %d port 0x%p inring 0x%p " "outring 0x%p\n", - __FUNCTION__, + __func__, port_number, (void *)port, (void *)port->ip_inring, (void *)port->ip_outring)); @@ -1317,7 +1317,7 @@ config_port(struct ioc4_port *port, int spiniter = 0; DPRINT_CONFIG(("%s: baud %d byte_size %d stop %d parenb %d parodd %d\n", - __FUNCTION__, baud, byte_size, stop_bits, parenb, parodd)); + __func__, baud, byte_size, stop_bits, parenb, parodd)); if (set_baud(port, baud)) return 1; @@ -1725,7 +1725,7 @@ ioc4_change_speed(struct uart_port *the_port, } baud = uart_get_baud_rate(the_port, new_termios, old_termios, MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED); - DPRINT_CONFIG(("%s: returned baud %d\n", __FUNCTION__, baud)); + DPRINT_CONFIG(("%s: returned baud %d\n", __func__, baud)); /* default is 9600 */ if (!baud) @@ -1765,7 +1765,7 @@ ioc4_change_speed(struct uart_port *the_port, DPRINT_CONFIG(("%s : port 0x%p cflag 0%o " "config_port(baud %d data %d stop %d p enable %d parity %d)," " notification 0x%x\n", - __FUNCTION__, (void *)port, cflag, baud, new_data, new_stop, + __func__, (void *)port, cflag, baud, new_data, new_stop, new_parity_enable, new_parity, the_port->ignore_status_mask)); if ((config_port(port, baud, /* baud */ @@ -2715,7 +2715,7 @@ ioc4_serial_core_attach(struct pci_dev *pdev, int port_type) DPRINT_CONFIG(("%s: attach pdev 0x%p - control 0x%p\n", - __FUNCTION__, pdev, (void *)control)); + __func__, pdev, (void *)control)); if (!control) return -ENODEV; @@ -2734,7 +2734,7 @@ ioc4_serial_core_attach(struct pci_dev *pdev, int port_type) port->ip_all_ports[port_type_idx] = the_port; DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p : type %s\n", - __FUNCTION__, (void *)the_port, + __func__, (void *)the_port, (void *)port, port_type == PROTO_RS232 ? "rs232" : "rs422")); @@ -2752,7 +2752,7 @@ ioc4_serial_core_attach(struct pci_dev *pdev, int port_type) if (uart_add_one_port(u_driver, the_port) < 0) { printk(KERN_WARNING "%s: unable to add port %d bus %d\n", - __FUNCTION__, the_port->line, pdev->bus->number); + __func__, the_port->line, pdev->bus->number); } else { DPRINT_CONFIG( ("IOC4 serial port %d irq = %d, bus %d\n", @@ -2777,7 +2777,7 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd) int ret = 0; - DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, idd->idd_pdev, + DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __func__, idd->idd_pdev, idd->idd_pci_id)); /* PCI-RT does not bring out serial connections. @@ -2806,7 +2806,7 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd) goto out2; } DPRINT_CONFIG(("%s : mem 0x%p, serial 0x%p\n", - __FUNCTION__, (void *)idd->idd_misc_regs, + __func__, (void *)idd->idd_misc_regs, (void *)serial)); /* Get memory for the new card */ @@ -2858,7 +2858,7 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd) } else { printk(KERN_WARNING "%s : request_irq fails for IRQ 0x%x\n ", - __FUNCTION__, idd->idd_pdev->irq); + __func__, idd->idd_pdev->irq); } ret = ioc4_attach_local(idd); if (ret) @@ -2911,13 +2911,13 @@ int ioc4_serial_init(void) if ((ret = uart_register_driver(&ioc4_uart_rs232)) < 0) { printk(KERN_WARNING "%s: Couldn't register rs232 IOC4 serial driver\n", - __FUNCTION__); + __func__); return ret; } if ((ret = uart_register_driver(&ioc4_uart_rs422)) < 0) { printk(KERN_WARNING "%s: Couldn't register rs422 IOC4 serial driver\n", - __FUNCTION__); + __func__); return ret; } diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c index da5a02cb4f63..2b6a013639e6 100644 --- a/drivers/serial/s3c2410.c +++ b/drivers/serial/s3c2410.c @@ -1096,13 +1096,13 @@ static int s3c24xx_serial_probe(struct platform_device *dev, ourport = &s3c24xx_serial_ports[probe_index]; probe_index++; - dbg("%s: initialising port %p...\n", __FUNCTION__, ourport); + dbg("%s: initialising port %p...\n", __func__, ourport); ret = s3c24xx_serial_init_port(ourport, info, dev); if (ret < 0) goto probe_err; - dbg("%s: adding port\n", __FUNCTION__); + dbg("%s: adding port\n", __func__); uart_add_one_port(&s3c24xx_uart_drv, &ourport->port); platform_set_drvdata(dev, &ourport->port); @@ -1587,7 +1587,7 @@ static int s3c2412_serial_resetport(struct uart_port *port, unsigned long ucon = rd_regl(port, S3C2410_UCON); dbg("%s: port=%p (%08lx), cfg=%p\n", - __FUNCTION__, port, port->mapbase, cfg); + __func__, port, port->mapbase, cfg); /* ensure we don't change the clock settings... */ diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c index 67b2338913c2..62b38582f5e9 100644 --- a/drivers/serial/sa1100.c +++ b/drivers/serial/sa1100.c @@ -655,7 +655,7 @@ void __init sa1100_register_uart_fns(struct sa1100_port_fns *fns) void __init sa1100_register_uart(int idx, int port) { if (idx >= NR_PORTS) { - printk(KERN_ERR "%s: bad index number %d\n", __FUNCTION__, idx); + printk(KERN_ERR "%s: bad index number %d\n", __func__, idx); return; } @@ -682,7 +682,7 @@ void __init sa1100_register_uart(int idx, int port) break; default: - printk(KERN_ERR "%s: bad port number %d\n", __FUNCTION__, port); + printk(KERN_ERR "%s: bad port number %d\n", __func__, port); } } diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index c2ea5d4df44a..969106187718 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -855,7 +855,7 @@ static int sci_notifier(struct notifier_block *self, printk(KERN_INFO "%s: got a postchange notification " "for cpu %d (old %d, new %d)\n", - __FUNCTION__, freqs->cpu, freqs->old, freqs->new); + __func__, freqs->cpu, freqs->old, freqs->new); } return NOTIFY_OK; diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c index 41fc61264443..019da2e05f0b 100644 --- a/drivers/serial/sn_console.c +++ b/drivers/serial/sn_console.c @@ -839,7 +839,7 @@ static int __init sn_sal_module_init(void) if (uart_add_one_port(&sal_console_uart, &sal_console_port.sc_port) < 0) { /* error - not sure what I'd do - so I'll do nothing */ - printk(KERN_ERR "%s: unable to add port\n", __FUNCTION__); + printk(KERN_ERR "%s: unable to add port\n", __func__); } /* when this driver is compiled in, the console initialization diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c index b565d5a37499..b51c24245be4 100644 --- a/drivers/serial/uartlite.c +++ b/drivers/serial/uartlite.c @@ -584,7 +584,7 @@ ulite_of_probe(struct of_device *op, const struct of_device_id *match) const unsigned int *id; int irq, rc; - dev_dbg(&op->dev, "%s(%p, %p)\n", __FUNCTION__, op, match); + dev_dbg(&op->dev, "%s(%p, %p)\n", __func__, op, match); rc = of_address_to_resource(op->node, 0, &res); if (rc) { diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c index 5e4310ccd591..01917c433f17 100644 --- a/drivers/serial/ucc_uart.c +++ b/drivers/serial/ucc_uart.c @@ -215,7 +215,7 @@ static inline dma_addr_t cpu2qe_addr(void *addr, struct uart_qe_port *qe_port) return qe_port->bd_dma_addr + (addr - qe_port->bd_virt); /* something nasty happened */ - printk(KERN_ERR "%s: addr=%p\n", __FUNCTION__, addr); + printk(KERN_ERR "%s: addr=%p\n", __func__, addr); BUG(); return 0; } @@ -234,7 +234,7 @@ static inline void *qe2cpu_addr(dma_addr_t addr, struct uart_qe_port *qe_port) return qe_port->bd_virt + (addr - qe_port->bd_dma_addr); /* something nasty happened */ - printk(KERN_ERR "%s: addr=%x\n", __FUNCTION__, addr); + printk(KERN_ERR "%s: addr=%x\n", __func__, addr); BUG(); return NULL; } -- cgit v1.2.3