From 70bb27b79adf63ea39e37371d09c823c7a8f93ce Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 9 Nov 2018 16:44:14 +0000 Subject: thermal: armada: fix legacy validity test sense Commit 8c0e64ac4075 ("thermal: armada: get rid of the ->is_valid() pointer") removed the unnecessary indirection through a function pointer, but in doing so, also removed the negation operator too: - if (priv->data->is_valid && !priv->data->is_valid(priv)) { + if (armada_is_valid(priv)) { which results in: armada_thermal f06f808c.thermal: Temperature sensor reading not valid armada_thermal f2400078.thermal: Temperature sensor reading not valid armada_thermal f4400078.thermal: Temperature sensor reading not valid at boot, or whenever the "temp" sysfs file is read. Replace the negation operator. Fixes: 8c0e64ac4075 ("thermal: armada: get rid of the ->is_valid() pointer") Signed-off-by: Russell King Signed-off-by: Eduardo Valentin --- drivers/thermal/armada_thermal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c index 92f67d40f2e9..1c9830b2c84d 100644 --- a/drivers/thermal/armada_thermal.c +++ b/drivers/thermal/armada_thermal.c @@ -357,7 +357,7 @@ static int armada_get_temp_legacy(struct thermal_zone_device *thermal, int ret; /* Valid check */ - if (armada_is_valid(priv)) { + if (!armada_is_valid(priv)) { dev_err(priv->dev, "Temperature sensor reading not valid\n"); return -EIO; -- cgit v1.2.3 From dc6946cbef38f10b9617250fa851e3cc550d9602 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 9 Nov 2018 17:01:05 +0000 Subject: thermal: armada: fix legacy resource fixup When the armada thermal module is inserted, removed and then reinserted, the system panics as per the messages below. The reason is that "edit" a live resource in the resource tree twice, and end up with it pointing to some other hardware. Editing live resources (resources that are part of the registered resource tree) is not permissible - the resource tree is an ordered set of resources, sorted by start address, and when a new resource is inserted, it is validated that it (a) fits within its parent resource and (b) does not overlap a neighbouring resource. Get rid of this resource editing. We can instead adjust the return value from ioremap() as ioremap() deals with the creation of page- based mappings - provided the adjustment does not cross a page boundary. SError Interrupt on CPU1, code 0xbf000000 -- SError CPU: 1 PID: 2749 Comm: modprobe Not tainted 4.19.0+ #175 Hardware name: Marvell 8040 MACCHIATOBin Double shot (DT) pstate: 20400085 (nzCv daIf +PAN -UAO) pc : regmap_mmio_read+0x3c/0x60 lr : regmap_mmio_read+0x3c/0x60 sp : ffffff800d453900 x29: ffffff800d453900 x28: ffffff800096a1d0 x27: 0000000000000100 x26: ffffff80009696d8 x25: ffffff8000969000 x24: ffffffc13a588918 x23: ffffffc13a9a28a8 x22: ffffff800d4539dc x21: 0000000000000084 x20: ffffff800d4539dc x19: ffffffc13a5d5480 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000030 x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f x9 : 0000000000000000 x8 : ffffffc13a5d5a80 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffffff800851be70 x2 : ffffff800851bd60 x1 : ffffff800d492ff8 x0 : 0000000000000000 Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 1 PID: 2749 Comm: modprobe Not tainted 4.19.0+ #175 Hardware name: Marvell 8040 MACCHIATOBin Double shot (DT) Call trace: dump_backtrace+0x0/0x158 show_stack+0x14/0x1c dump_stack+0x90/0xb0 panic+0x128/0x298 print_tainted+0x0/0xa8 arm64_serror_panic+0x74/0x80 do_serror+0x5c/0xb8 el1_error+0xb4/0x144 regmap_mmio_read+0x3c/0x60 _regmap_bus_reg_read+0x18/0x20 _regmap_read+0x64/0x180 regmap_read+0x44/0x6c armada_ap806_init+0x24/0x5c [armada_thermal] armada_thermal_probe+0x2c8/0x37c [armada_thermal] platform_drv_probe+0x4c/0xb0 really_probe+0x21c/0x2b4 driver_probe_device+0x58/0xfc __driver_attach+0xd4/0xd8 bus_for_each_dev+0x50/0xa0 driver_attach+0x20/0x28 bus_add_driver+0x1c4/0x228 driver_register+0x6c/0x124 __platform_driver_register+0x4c/0x54 armada_thermal_driver_init+0x20/0x1000 [armada_thermal] do_one_initcall+0x30/0x204 do_init_module+0x5c/0x1d4 load_module+0x1a88/0x212c __se_sys_finit_module+0xa0/0xac __arm64_sys_finit_module+0x1c/0x24 el0_svc_common+0x94/0xf0 el0_svc_handler+0x24/0x80 el0_svc+0x8/0x3c0 SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x0,21806000 Memory Limit: none Signed-off-by: Russell King Tested-by: Miquel Raynal Signed-off-by: Eduardo Valentin --- drivers/thermal/armada_thermal.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c index 1c9830b2c84d..a6d3ee6077f8 100644 --- a/drivers/thermal/armada_thermal.c +++ b/drivers/thermal/armada_thermal.c @@ -526,23 +526,21 @@ static int armada_thermal_probe_legacy(struct platform_device *pdev, /* First memory region points towards the status register */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -EIO; - - /* - * Edit the resource start address and length to map over all the - * registers, instead of pointing at them one by one. - */ - res->start -= data->syscon_status_off; - res->end = res->start + max(data->syscon_status_off, - max(data->syscon_control0_off, - data->syscon_control1_off)) + - sizeof(unsigned int) - 1; - base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(base)) return PTR_ERR(base); + /* + * Fix up from the old individual DT register specification to + * cover all the registers. We do this by adjusting the ioremap() + * result, which should be fine as ioremap() deals with pages. + * However, validate that we do not cross a page boundary while + * making this adjustment. + */ + if (((unsigned long)base & ~PAGE_MASK) < data->syscon_status_off) + return -EINVAL; + base -= data->syscon_status_off; + priv->syscon = devm_regmap_init_mmio(&pdev->dev, base, &armada_thermal_regmap_config); if (IS_ERR(priv->syscon)) -- cgit v1.2.3 From 6085c13351ebab4a427215082d11e2f02bd3fb46 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sat, 10 Nov 2018 17:55:27 +0100 Subject: thermal: bcm2835: Switch to SPDX identifier Adopt the SPDX license identifier headers to ease license compliance management. Cc: Martin Sperl Signed-off-by: Stefan Wahren Signed-off-by: Eduardo Valentin --- drivers/thermal/broadcom/bcm2835_thermal.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c index 23ad4f9f2143..b9d90f0ed504 100644 --- a/drivers/thermal/broadcom/bcm2835_thermal.c +++ b/drivers/thermal/broadcom/bcm2835_thermal.c @@ -1,17 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Driver for Broadcom BCM2835 SoC temperature sensor * * Copyright (C) 2016 Martin Sperl - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include -- cgit v1.2.3 From 13cfb713c8c2035c058af3233c3432165c97ceeb Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 30 Oct 2018 16:14:59 +0100 Subject: thermal: armada: constify thermal_zone_of_device_ops structure The thermal_zone_of_device_ops structure can be const as it is only passed as the last argument of devm_thermal_zone_of_sensor_register and the corresponding parameter is declared as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall Reviewed-by: Daniel Lezcano Signed-off-by: Eduardo Valentin --- drivers/thermal/armada_thermal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c index a6d3ee6077f8..d7105d01859a 100644 --- a/drivers/thermal/armada_thermal.c +++ b/drivers/thermal/armada_thermal.c @@ -395,7 +395,7 @@ unlock_mutex: return ret; } -static struct thermal_zone_of_device_ops of_ops = { +static const struct thermal_zone_of_device_ops of_ops = { .get_temp = armada_get_temp, }; -- cgit v1.2.3 From 1aea7aee805e3d1288f9f1fa4484964b51664960 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 30 Oct 2018 16:15:00 +0100 Subject: thermal: broadcom: constify thermal_zone_of_device_ops structure The thermal_zone_of_device_ops structure can be const as it is only passed as the last argument of thermal_zone_of_sensor_register and the corresponding parameter is declared as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall Reviewed-by: Daniel Lezcano Signed-off-by: Eduardo Valentin --- drivers/thermal/broadcom/brcmstb_thermal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c index 1919f91fa756..e8b1570cc388 100644 --- a/drivers/thermal/broadcom/brcmstb_thermal.c +++ b/drivers/thermal/broadcom/brcmstb_thermal.c @@ -299,7 +299,7 @@ static int brcmstb_set_trips(void *data, int low, int high) return 0; } -static struct thermal_zone_of_device_ops of_ops = { +static const struct thermal_zone_of_device_ops of_ops = { .get_temp = brcmstb_get_temp, .set_trips = brcmstb_set_trips, }; -- cgit v1.2.3