From 1c06552a703c6a4256976a1615d262b5a0d754e5 Mon Sep 17 00:00:00 2001 From: Jason Jin Date: Fri, 25 Nov 2016 14:40:55 +0800 Subject: powerpc/85xx: Enable display support for t1042rdb Add a diu_ops implementation for t1042rdb. Signed-off-by: Jason Jin [Meng Yi: Made file t1042rdb-specific] Signed-off-by: Meng Yi [scottwood: clean up commit message] Signed-off-by: Scott Wood --- arch/powerpc/platforms/85xx/Makefile | 1 + arch/powerpc/platforms/85xx/t1042rdb_diu.c | 152 +++++++++++++++++++++++++++++ 2 files changed, 153 insertions(+) create mode 100644 arch/powerpc/platforms/85xx/t1042rdb_diu.c diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 7bc86dae9517..fe19dad568e2 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_P1022_RDK) += p1022_rdk.o obj-$(CONFIG_P1023_RDB) += p1023_rdb.o obj-$(CONFIG_TWR_P102x) += twr_p102x.o obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o +obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o obj-$(CONFIG_STX_GP3) += stx_gp3.o obj-$(CONFIG_TQM85xx) += tqm85xx.o obj-$(CONFIG_SBC8548) += sbc8548.o diff --git a/arch/powerpc/platforms/85xx/t1042rdb_diu.c b/arch/powerpc/platforms/85xx/t1042rdb_diu.c new file mode 100644 index 000000000000..58fa3d319f1c --- /dev/null +++ b/arch/powerpc/platforms/85xx/t1042rdb_diu.c @@ -0,0 +1,152 @@ +/* + * T1042 platform DIU operation + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include + +#include + +/*DIU Pixel ClockCR offset in scfg*/ +#define CCSR_SCFG_PIXCLKCR 0x28 + +/* DIU Pixel Clock bits of the PIXCLKCR */ +#define PIXCLKCR_PXCKEN 0x80000000 +#define PIXCLKCR_PXCKINV 0x40000000 +#define PIXCLKCR_PXCKDLY 0x0000FF00 +#define PIXCLKCR_PXCLK_MASK 0x00FF0000 + +/* Some CPLD register definitions */ +#define CPLD_DIUCSR 0x16 +#define CPLD_DIUCSR_DVIEN 0x80 +#define CPLD_DIUCSR_BACKLIGHT 0x0f + +struct device_node *cpld_node; + +/** + * t1042rdb_set_monitor_port: switch the output to a different monitor port + */ +static void t1042rdb_set_monitor_port(enum fsl_diu_monitor_port port) +{ + static void __iomem *cpld_base; + + cpld_base = of_iomap(cpld_node, 0); + if (!cpld_base) { + pr_err("%s: Could not map cpld registers\n", __func__); + goto exit; + } + + switch (port) { + case FSL_DIU_PORT_DVI: + /* Enable the DVI(HDMI) port, disable the DFP and + * the backlight + */ + clrbits8(cpld_base + CPLD_DIUCSR, CPLD_DIUCSR_DVIEN); + break; + case FSL_DIU_PORT_LVDS: + /* + * LVDS also needs backlight enabled, otherwise the display + * will be blank. + */ + /* Enable the DFP port, disable the DVI*/ + setbits8(cpld_base + CPLD_DIUCSR, 0x01 << 8); + setbits8(cpld_base + CPLD_DIUCSR, 0x01 << 4); + setbits8(cpld_base + CPLD_DIUCSR, CPLD_DIUCSR_BACKLIGHT); + break; + default: + pr_err("%s: Unsupported monitor port %i\n", __func__, port); + } + + iounmap(cpld_base); +exit: + of_node_put(cpld_node); +} + +/** + * t1042rdb_set_pixel_clock: program the DIU's clock + * @pixclock: pixel clock in ps (pico seconds) + */ +static void t1042rdb_set_pixel_clock(unsigned int pixclock) +{ + struct device_node *scfg_np; + void __iomem *scfg; + unsigned long freq; + u64 temp; + u32 pxclk; + + scfg_np = of_find_compatible_node(NULL, NULL, "fsl,t1040-scfg"); + if (!scfg_np) { + pr_err("%s: Missing scfg node. Can not display video.\n", + __func__); + return; + } + + scfg = of_iomap(scfg_np, 0); + of_node_put(scfg_np); + if (!scfg) { + pr_err("%s: Could not map device. Can not display video.\n", + __func__); + return; + } + + /* Convert pixclock into frequency */ + temp = 1000000000000ULL; + do_div(temp, pixclock); + freq = temp; + + /* + * 'pxclk' is the ratio of the platform clock to the pixel clock. + * This number is programmed into the PIXCLKCR register, and the valid + * range of values is 2-255. + */ + pxclk = DIV_ROUND_CLOSEST(fsl_get_sys_freq(), freq); + pxclk = clamp_t(u32, pxclk, 2, 255); + + /* Disable the pixel clock, and set it to non-inverted and no delay */ + clrbits32(scfg + CCSR_SCFG_PIXCLKCR, + PIXCLKCR_PXCKEN | PIXCLKCR_PXCKDLY | PIXCLKCR_PXCLK_MASK); + + /* Enable the clock and set the pxclk */ + setbits32(scfg + CCSR_SCFG_PIXCLKCR, PIXCLKCR_PXCKEN | (pxclk << 16)); + + iounmap(scfg); +} + +/** + * t1042rdb_valid_monitor_port: set the monitor port for sysfs + */ +static enum fsl_diu_monitor_port +t1042rdb_valid_monitor_port(enum fsl_diu_monitor_port port) +{ + switch (port) { + case FSL_DIU_PORT_DVI: + case FSL_DIU_PORT_LVDS: + return port; + default: + return FSL_DIU_PORT_DVI; /* Dual-link LVDS is not supported */ + } +} + +static int __init t1042rdb_diu_init(void) +{ + cpld_node = of_find_compatible_node(NULL, NULL, "fsl,t1042rdb-cpld"); + if (!cpld_node) + return 0; + + diu_ops.set_monitor_port = t1042rdb_set_monitor_port; + diu_ops.set_pixel_clock = t1042rdb_set_pixel_clock; + diu_ops.valid_monitor_port = t1042rdb_valid_monitor_port; + + return 0; +} + +early_initcall(t1042rdb_diu_init); -- cgit v1.2.3 From a674c7d470bb47e82f4eb1fa944eadeac2f6bbaf Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Thu, 15 Dec 2016 14:22:26 +0100 Subject: powerpc/corenet: explicitly disable the SDHC controller on kmcoge4 It is not implemented on the kmcoge4 hardware and if not disabled it leads to error messages with the corenet32_smp_defconfig. Signed-off-by: Valentin Longchamp Signed-off-by: Scott Wood --- arch/powerpc/boot/dts/fsl/kmcoge4.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/powerpc/boot/dts/fsl/kmcoge4.dts b/arch/powerpc/boot/dts/fsl/kmcoge4.dts index ae70a24094b0..e103c0f3f650 100644 --- a/arch/powerpc/boot/dts/fsl/kmcoge4.dts +++ b/arch/powerpc/boot/dts/fsl/kmcoge4.dts @@ -83,6 +83,10 @@ }; }; + sdhc@114000 { + status = "disabled"; + }; + i2c@119000 { status = "disabled"; }; -- cgit v1.2.3 From 7b51f8e35e11b9226f439d154f54b8ae8d128e34 Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Thu, 15 Dec 2016 14:22:27 +0100 Subject: powerpc/85xx: remove the kmp204x_defconfig It is not maintained and thus obsolete. corenet32_smp_defconfig can be used as reference for the kmcoge4/kmp204x boards. Signed-off-by: Valentin Longchamp Signed-off-by: Scott Wood --- arch/powerpc/configs/85xx/kmp204x_defconfig | 220 ---------------------------- 1 file changed, 220 deletions(-) delete mode 100644 arch/powerpc/configs/85xx/kmp204x_defconfig diff --git a/arch/powerpc/configs/85xx/kmp204x_defconfig b/arch/powerpc/configs/85xx/kmp204x_defconfig deleted file mode 100644 index aaaaa609cd24..000000000000 --- a/arch/powerpc/configs/85xx/kmp204x_defconfig +++ /dev/null @@ -1,220 +0,0 @@ -CONFIG_PPC_85xx=y -CONFIG_SMP=y -CONFIG_NR_CPUS=8 -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_AUDIT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CGROUPS=y -CONFIG_CGROUP_SCHED=y -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_ALL=y -CONFIG_EMBEDDED=y -CONFIG_PERF_EVENTS=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_CORENET_GENERIC=y -CONFIG_MPIC_MSGR=y -CONFIG_HIGHMEM=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_BINFMT_MISC=m -CONFIG_KEXEC=y -CONFIG_FORCE_MAX_ZONEORDER=13 -CONFIG_PCI=y -CONFIG_PCIEPORTBUS=y -# CONFIG_PCIEASPM is not set -CONFIG_PCI_MSI=y -CONFIG_ADVANCED_OPTIONS=y -CONFIG_LOWMEM_SIZE_BOOL=y -CONFIG_LOWMEM_SIZE=0x20000000 -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_XFRM_SUB_POLICY=y -CONFIG_XFRM_STATISTICS=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_INET_AH=y -CONFIG_INET_ESP=y -CONFIG_INET_IPCOMP=y -CONFIG_IPV6=y -CONFIG_IP_SCTP=m -CONFIG_TIPC=y -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_CBQ=y -CONFIG_NET_SCH_HTB=y -CONFIG_NET_SCH_HFSC=y -CONFIG_NET_SCH_PRIO=y -CONFIG_NET_SCH_MULTIQ=y -CONFIG_NET_SCH_RED=y -CONFIG_NET_SCH_SFQ=y -CONFIG_NET_SCH_TEQL=y -CONFIG_NET_SCH_TBF=y -CONFIG_NET_SCH_GRED=y -CONFIG_NET_CLS_BASIC=y -CONFIG_NET_CLS_TCINDEX=y -CONFIG_NET_CLS_U32=y -CONFIG_CLS_U32_PERF=y -CONFIG_CLS_U32_MARK=y -CONFIG_NET_CLS_FLOW=y -CONFIG_NET_CLS_CGROUP=y -CONFIG_UEVENT_HELPER_PATH="/sbin/mdev" -CONFIG_DEVTMPFS=y -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_PHRAM=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC_BCH=y -CONFIG_MTD_NAND_FSL_ELBC=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_GLUEBI=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=2 -CONFIG_BLK_DEV_RAM_SIZE=2048 -CONFIG_EEPROM_AT24=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -CONFIG_BLK_DEV_SR=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_NETDEVICES=y -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_VENDOR_ADAPTEC is not set -# CONFIG_NET_VENDOR_ALTEON is not set -# CONFIG_NET_VENDOR_AMD is not set -# CONFIG_NET_VENDOR_ATHEROS is not set -# CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_BROCADE is not set -# CONFIG_NET_VENDOR_CHELSIO is not set -# CONFIG_NET_VENDOR_CISCO is not set -# CONFIG_NET_VENDOR_DEC is not set -# CONFIG_NET_VENDOR_DLINK is not set -# CONFIG_NET_VENDOR_EMULEX is not set -# CONFIG_NET_VENDOR_EXAR is not set -CONFIG_FSL_PQ_MDIO=y -CONFIG_FSL_XGMAC_MDIO=y -# CONFIG_NET_VENDOR_HP is not set -# CONFIG_NET_VENDOR_INTEL is not set -# CONFIG_NET_VENDOR_MARVELL is not set -# CONFIG_NET_VENDOR_MELLANOX is not set -# CONFIG_NET_VENDOR_MICREL is not set -# CONFIG_NET_VENDOR_MICROCHIP is not set -# CONFIG_NET_VENDOR_MYRI is not set -# CONFIG_NET_VENDOR_NATSEMI is not set -# CONFIG_NET_VENDOR_NVIDIA is not set -# CONFIG_NET_VENDOR_OKI is not set -# CONFIG_NET_PACKET_ENGINE is not set -# CONFIG_NET_VENDOR_QLOGIC is not set -# CONFIG_NET_VENDOR_REALTEK is not set -# CONFIG_NET_VENDOR_RDC is not set -# CONFIG_NET_VENDOR_SEEQ is not set -# CONFIG_NET_VENDOR_SILAN is not set -# CONFIG_NET_VENDOR_SIS is not set -# CONFIG_NET_VENDOR_SMSC is not set -# CONFIG_NET_VENDOR_STMICRO is not set -# CONFIG_NET_VENDOR_SUN is not set -# CONFIG_NET_VENDOR_TEHUTI is not set -# CONFIG_NET_VENDOR_TI is not set -# CONFIG_NET_VENDOR_VIA is not set -# CONFIG_NET_VENDOR_WIZNET is not set -# CONFIG_NET_VENDOR_XILINX is not set -CONFIG_MARVELL_PHY=y -CONFIG_VITESSE_PHY=y -CONFIG_FIXED_PHY=y -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_PPC_EPAPR_HV_BYTECHAN=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -CONFIG_NVRAM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MUX=y -CONFIG_I2C_MUX_PCA954x=y -CONFIG_I2C_MPC=y -CONFIG_SPI=y -CONFIG_SPI_FSL_SPI=y -CONFIG_SPI_FSL_ESPI=y -CONFIG_SPI_SPIDEV=m -CONFIG_PTP_1588_CLOCK=y -# CONFIG_HWMON is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EDAC=y -CONFIG_EDAC_MM_EDAC=y -CONFIG_EDAC_MPC85XX=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_DS3232=y -CONFIG_RTC_DRV_CMOS=y -CONFIG_UIO=y -CONFIG_STAGING=y -CONFIG_CLK_QORIQ=y -CONFIG_EXT2_FS=y -CONFIG_NTFS_FS=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_UBIFS_FS=y -CONFIG_CRAMFS=y -CONFIG_SQUASHFS=y -CONFIG_SQUASHFS_XZ=y -CONFIG_NFS_FS=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=m -CONFIG_CRC_ITU_T=m -CONFIG_DEBUG_INFO=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_SHIRQ=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_SCHEDSTATS=y -CONFIG_RCU_TRACE=y -CONFIG_UPROBE_EVENT=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_MD4=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_DEV_FSL_CAAM=y -- cgit v1.2.3 From fdc8c4adb6a465b5873df97fcbd1cb332ade019b Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Thu, 15 Dec 2016 14:22:28 +0100 Subject: powerpc/corenet: add support for the kmcent2 board This board is built around Freescale's T1040 SoC. The peripherals used by this design are: - DDR3 RAM with SPD support - parallel NOR Flash as boot medium - 1 PCIe bus (PCIe1 x1) - 3 FMAN Ethernet devices (FMAN1 DTSEC1/2/5) - 4 IFC bus devices: - NOR flash - NAND flash - QRIO reset/power mgmt CPLD - BFTIC chassis management CPLD - 2 I2C buses - 1 SPI bus - HDLC bus with the QE's UCC1 - last but not least, the mandatory serial port The board can be used with the corenet32_smp_defconfig. Signed-off-by: Valentin Longchamp Signed-off-by: Scott Wood --- arch/powerpc/boot/dts/fsl/kmcent2.dts | 303 ++++++++++++++++++++++++++ arch/powerpc/platforms/85xx/corenet_generic.c | 1 + 2 files changed, 304 insertions(+) create mode 100644 arch/powerpc/boot/dts/fsl/kmcent2.dts diff --git a/arch/powerpc/boot/dts/fsl/kmcent2.dts b/arch/powerpc/boot/dts/fsl/kmcent2.dts new file mode 100644 index 000000000000..47afa438602e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/kmcent2.dts @@ -0,0 +1,303 @@ +/* + * Keymile kmcent2 Device Tree Source, based on T1040RDB DTS + * + * (C) Copyright 2016 + * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com + * + * Copyright 2014 - 2015 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "t104xsi-pre.dtsi" + +/ { + model = "keymile,kmcent2"; + compatible = "keymile,kmcent2"; + + aliases { + front_phy = &front_phy; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x04000000 + 1 0 0xf 0xfa000000 0x00010000 + 2 0 0xf 0xfb000000 0x00010000 + 4 0 0xf 0xc0000000 0x08000000 + 6 0 0xf 0xd0000000 0x08000000 + 7 0 0xf 0xd8000000 0x08000000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x04000000>; + bank-width = <2>; + device-width = <2>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x10000>; + }; + + board-control@2,0 { + compatible = "keymile,qriox"; + reg = <0x2 0x0 0x80>; + }; + + chassis-mgmt@6,0 { + compatible = "keymile,bfticu"; + reg = <6 0 0x100>; + interrupt-controller; + interrupt-parent = <&mpic>; + interrupts = <11 1 0 0>; + #interrupt-cells = <1>; + }; + + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + qportals: qman-portals@ff6000000 { + ranges = <0x0 0xf 0xf6000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + spi@110000 { + network-clock@1 { + compatible = "zarlink,zl30364"; + reg = <1>; + spi-max-frequency = <1000000>; + }; + }; + + sdhc@114000 { + status = "disabled"; + }; + + i2c@118000 { + clock-frequency = <100000>; + + mux@70 { + compatible = "nxp,pca9547"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@54 { + compatible = "24c02"; + reg = <0x54>; + pagesize = <2>; + read-only; + label = "ddr3-spd"; + }; + }; + + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + temp-sensor@48 { + compatible = "national,lm75"; + reg = <0x48>; + label = "SENSOR_0"; + }; + temp-sensor@4a { + compatible = "national,lm75"; + reg = <0x4a>; + label = "SENSOR_2"; + }; + temp-sensor@4b { + compatible = "national,lm75"; + reg = <0x4b>; + label = "SENSOR_3"; + }; + }; + }; + }; + + i2c@118100 { + clock-frequency = <100000>; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom@54 { + compatible = "atmel,24c08"; + reg = <0x54>; + pagesize = <16>; + }; + }; + + i2c@119000 { + status = "disabled"; + }; + + i2c@119100 { + status = "disabled"; + }; + + serial2: serial@11d500 { + status = "disabled"; + }; + + serial3: serial@11d600 { + status = "disabled"; + }; + + usb0: usb@210000 { + status = "disabled"; + }; + usb1: usb@211000 { + status = "disabled"; + }; + + display@180000 { + status = "disabled"; + }; + + sata@220000 { + status = "disabled"; + }; + sata@221000 { + status = "disabled"; + }; + + fman@400000 { + ethernet@e0000 { + fixed-link = <0 1 1000 0 0>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + status = "disabled"; + }; + + ethernet@e6000 { + status = "disabled"; + }; + + ethernet@e8000 { + phy-handle = <&front_phy>; + phy-connection-type = "rgmii"; + }; + + mdio0: mdio@fc000 { + front_phy: ethernet-phy@11 { + reg = <0x11>; + }; + }; + }; + }; + + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + status = "disabled"; + }; + + pci2: pcie@ffe260000 { + status = "disabled"; + }; + + pci3: pcie@ffe270000 { + status = "disabled"; + }; + + qe: qe@ffe140000 { + ranges = <0x0 0xf 0xfe140000 0x40000>; + reg = <0xf 0xfe140000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + + si1: si@700 { + compatible = "fsl,t1040-qe-si"; + reg = <0x700 0x80>; + }; + + siram1: siram@1000 { + compatible = "fsl,t1040-qe-siram"; + reg = <0x1000 0x800>; + }; + + ucc_hdlc: ucc@2000 { + device_type = "hdlc"; + compatible = "fsl,ucc-hdlc"; + rx-clock-name = "clk9"; + tx-clock-name = "clk9"; + fsl,tx-timeslot-mask = <0xfffffffe>; + fsl,rx-timeslot-mask = <0xfffffffe>; + fsl,siram-entry-id = <0>; + }; + }; +}; + +#include "t1040si-post.dtsi" diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c index 6c0ba75fb256..ac191a7a1337 100644 --- a/arch/powerpc/platforms/85xx/corenet_generic.c +++ b/arch/powerpc/platforms/85xx/corenet_generic.c @@ -157,6 +157,7 @@ static const char * const boards[] __initconst = { "fsl,T1040RDB", "fsl,T1042RDB", "fsl,T1042RDB_PI", + "keymile,kmcent2", "keymile,kmcoge4", "varisys,CYRUS", NULL -- cgit v1.2.3 From fa769d3f58e6b0db4ed9f5f05ef1f251692f90c6 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Tue, 29 Nov 2016 09:52:13 +0100 Subject: powerpc/32: Enable HW_BREAKPOINT on BOOK3S BOOK3S also has DABR register and capability to handle data breakpoints, so this patch enable it on all BOOK3S, not only 64 bits. Signed-off-by: Christophe Leroy Signed-off-by: Scott Wood --- arch/powerpc/Kconfig | 2 +- arch/powerpc/include/asm/processor.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index a8ee573fe610..1971ed4e0336 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -113,7 +113,7 @@ config PPC select HAVE_PERF_REGS select HAVE_PERF_USER_STACK_DUMP select HAVE_REGS_AND_STACK_ACCESS_API - select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S_64 + select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S select ARCH_WANT_IPC_PARSE_VERSION select SPARSE_IRQ select IRQ_DOMAIN diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 1ba814436c73..2053a4b0914f 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -225,6 +225,7 @@ struct thread_struct { #ifdef CONFIG_PPC64 unsigned long start_tb; /* Start purr when proc switched in */ unsigned long accum_tb; /* Total accumulated purr for process */ +#endif #ifdef CONFIG_HAVE_HW_BREAKPOINT struct perf_event *ptrace_bps[HBP_NUM]; /* @@ -233,7 +234,6 @@ struct thread_struct { */ struct perf_event *last_hit_ubp; #endif /* CONFIG_HAVE_HW_BREAKPOINT */ -#endif struct arch_hw_breakpoint hw_brk; /* info on the hardware breakpoint */ unsigned long trap_nr; /* last trap # on this thread */ u8 load_fp; -- cgit v1.2.3 From 4ad8622dc54895c0072ddc919a83ea2a2f05605f Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Tue, 29 Nov 2016 09:52:15 +0100 Subject: powerpc/8xx: Implement hw_breakpoint This patch implements HW breakpoint on the 8xx. The 8xx has capability to manage HW breakpoints, which is slightly different than BOOK3S: 1/ The breakpoint match doesn't trigger a DSI exception but a dedicated data breakpoint exception. 2/ The breakpoint happens after the instruction has completed, no need to single step or emulate the instruction, 3/ Matched address is not set in DAR but in BAR, 4/ DABR register doesn't exist, instead we have registers LCTRL1, LCTRL2 and CMPx registers, 5/ The match on one comparator is not on a double word but on a single word. The patch does: 1/ Prepare the dedicated registers in call to __set_dabr(). In order to emulate the double word handling of BOOK3S, comparator E is set to DABR address value and comparator F to address + 4. Then breakpoint 1 is set to match comparator E or F, 2/ Skip the singlestepping stage when compiled for CONFIG_PPC_8xx, 3/ Implement the exception. In that exception, the matched address is taken from SPRN_BAR and manage as if it was from SPRN_DAR. 4/ I/D TLB error exception routines perform a tlbie on bad TLBs. That tlbie triggers the breakpoint exception when performed on the breakpoint address. For this reason, the routine returns if the match is from one of those two tlbie. Signed-off-by: Christophe Leroy Signed-off-by: Scott Wood --- arch/powerpc/Kconfig | 2 +- arch/powerpc/include/asm/reg_8xx.h | 7 +++++++ arch/powerpc/kernel/head_8xx.S | 28 +++++++++++++++++++++++++++- arch/powerpc/kernel/hw_breakpoint.c | 6 +++++- arch/powerpc/kernel/process.c | 22 ++++++++++++++++++++++ 5 files changed, 62 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 1971ed4e0336..8b201eefdeaa 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -113,7 +113,7 @@ config PPC select HAVE_PERF_REGS select HAVE_PERF_USER_STACK_DUMP select HAVE_REGS_AND_STACK_ACCESS_API - select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S + select HAVE_HW_BREAKPOINT if PERF_EVENTS && (PPC_BOOK3S || PPC_8xx) select ARCH_WANT_IPC_PARSE_VERSION select SPARSE_IRQ select IRQ_DOMAIN diff --git a/arch/powerpc/include/asm/reg_8xx.h b/arch/powerpc/include/asm/reg_8xx.h index 1f1636124a04..c52725b7085d 100644 --- a/arch/powerpc/include/asm/reg_8xx.h +++ b/arch/powerpc/include/asm/reg_8xx.h @@ -29,6 +29,13 @@ #define SPRN_EIE 80 /* External interrupt enable (EE=1, RI=1) */ #define SPRN_EID 81 /* External interrupt disable (EE=0, RI=1) */ +/* Debug registers */ +#define SPRN_CMPE 152 +#define SPRN_CMPF 153 +#define SPRN_LCTRL1 156 +#define SPRN_LCTRL2 157 +#define SPRN_BAR 159 + /* Commands. Only the first few are available to the instruction cache. */ #define IDC_ENABLE 0x02000000 /* Cache enable */ diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index 1a9c99d3e5d8..5fcbd79a121d 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -561,6 +561,7 @@ InstructionTLBError: andis. r10,r5,0x4000 beq+ 1f tlbie r4 +itlbie: /* 0x400 is InstructionAccess exception, needed by bad_page_fault() */ 1: EXC_XFER_LITE(0x400, handle_page_fault) @@ -585,6 +586,7 @@ DARFixed:/* Return from dcbx instruction bug workaround */ andis. r10,r5,0x4000 beq+ 1f tlbie r4 +dtlbie: 1: li r10,RPN_PATTERN mtspr SPRN_DAR,r10 /* Tag DAR, to be used in DTLB Error */ /* 0x300 is DataAccess exception, needed by bad_page_fault() */ @@ -602,7 +604,27 @@ DARFixed:/* Return from dcbx instruction bug workaround */ * support of breakpoints and such. Someday I will get around to * using them. */ - EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_EE) + . = 0x1c00 +DataBreakpoint: + EXCEPTION_PROLOG_0 + mfcr r10 + mfspr r11, SPRN_SRR0 + cmplwi cr0, r11, (dtlbie - PAGE_OFFSET)@l + cmplwi cr7, r11, (itlbie - PAGE_OFFSET)@l + beq- cr0, 11f + beq- cr7, 11f + EXCEPTION_PROLOG_1 + EXCEPTION_PROLOG_2 + addi r3,r1,STACK_FRAME_OVERHEAD + mfspr r4,SPRN_BAR + stw r4,_DAR(r11) + mfspr r5,SPRN_DSISR + EXC_XFER_EE(0x1c00, do_break) +11: + mtcr r10 + EXCEPTION_EPILOG_0 + rfi + EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE) EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE) EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE) @@ -977,6 +999,10 @@ initial_mmu: lis r8, IDC_ENABLE@h mtspr SPRN_DC_CST, r8 #endif + /* Disable debug mode entry on data breakpoints */ + mfspr r8, SPRN_DER + rlwinm r8, r8, 0, ~0x8 + mtspr SPRN_DER, r8 blr diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c index 4d3aa05e28be..146eaa9b350e 100644 --- a/arch/powerpc/kernel/hw_breakpoint.c +++ b/arch/powerpc/kernel/hw_breakpoint.c @@ -211,9 +211,11 @@ int hw_breakpoint_handler(struct die_args *args) int rc = NOTIFY_STOP; struct perf_event *bp; struct pt_regs *regs = args->regs; +#ifndef CONFIG_PPC_8xx int stepped = 1; - struct arch_hw_breakpoint *info; unsigned int instr; +#endif + struct arch_hw_breakpoint *info; unsigned long dar = regs->dar; /* Disable breakpoints during exception handling */ @@ -255,6 +257,7 @@ int hw_breakpoint_handler(struct die_args *args) (dar - bp->attr.bp_addr < bp->attr.bp_len))) info->type |= HW_BRK_TYPE_EXTRANEOUS_IRQ; +#ifndef CONFIG_PPC_8xx /* Do not emulate user-space instructions, instead single-step them */ if (user_mode(regs)) { current->thread.last_hit_ubp = bp; @@ -278,6 +281,7 @@ int hw_breakpoint_handler(struct die_args *args) perf_event_disable_inatomic(bp); goto out; } +#endif /* * As a policy, the callback is invoked in a 'trigger-after-execute' * fashion diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 04885cec24df..2dcb65fee638 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -736,6 +736,28 @@ static inline int __set_dabr(unsigned long dabr, unsigned long dabrx) mtspr(SPRN_DABRX, dabrx); return 0; } +#elif defined(CONFIG_PPC_8xx) +static inline int __set_dabr(unsigned long dabr, unsigned long dabrx) +{ + unsigned long addr = dabr & ~HW_BRK_TYPE_DABR; + unsigned long lctrl1 = 0x90000000; /* compare type: equal on E & F */ + unsigned long lctrl2 = 0x8e000002; /* watchpoint 1 on cmp E | F */ + + if ((dabr & HW_BRK_TYPE_RDWR) == HW_BRK_TYPE_READ) + lctrl1 |= 0xa0000; + else if ((dabr & HW_BRK_TYPE_RDWR) == HW_BRK_TYPE_WRITE) + lctrl1 |= 0xf0000; + else if ((dabr & HW_BRK_TYPE_RDWR) == 0) + lctrl2 = 0; + + mtspr(SPRN_LCTRL2, 0); + mtspr(SPRN_CMPE, addr); + mtspr(SPRN_CMPF, addr + 4); + mtspr(SPRN_LCTRL1, lctrl1); + mtspr(SPRN_LCTRL2, lctrl2); + + return 0; +} #else static inline int __set_dabr(unsigned long dabr, unsigned long dabrx) { -- cgit v1.2.3 From 2add203169fd6bf419176e283f701d26944bce41 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Tue, 13 Dec 2016 17:57:38 +0100 Subject: powerpc/32: Remove FIX_SRR1 FIX_SRR1() is defined as blank. Last useful instance of FIX_SRR1() was removed by commit 40ef8cbc6d360 ("powerpc: Get 64-bit configs to compile with ARCH=powerpc") in 2005. Signed-off-by: Christophe Leroy Signed-off-by: Scott Wood --- arch/powerpc/include/asm/ppc_asm.h | 1 - arch/powerpc/kernel/entry_32.S | 4 ---- arch/powerpc/kernel/head_32.S | 3 --- 3 files changed, 8 deletions(-) diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index 025833b8df9f..359c44341761 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -505,7 +505,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601) #define MTMSRD(r) mtmsrd r #define MTMSR_EERI(reg) mtmsrd reg,1 #else -#define FIX_SRR1(ra, rb) #ifndef CONFIG_40x #define RFI rfi #else diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 5742dbdbee46..980626ac34ee 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -292,7 +292,6 @@ stack_ovf: lis r9,StackOverflow@ha addi r9,r9,StackOverflow@l LOAD_MSR_KERNEL(r10,MSR_KERNEL) - FIX_SRR1(r10,r12) mtspr SPRN_SRR0,r9 mtspr SPRN_SRR1,r10 SYNC @@ -417,7 +416,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX) mtlr r4 mtcr r5 lwz r7,_NIP(r1) - FIX_SRR1(r8, r0) lwz r2,GPR2(r1) lwz r1,GPR1(r1) mtspr SPRN_SRR0,r7 @@ -951,7 +949,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX) .globl exc_exit_restart exc_exit_restart: lwz r12,_NIP(r1) - FIX_SRR1(r9,r10) mtspr SPRN_SRR0,r12 mtspr SPRN_SRR1,r9 REST_4GPRS(9, r1) @@ -1294,7 +1291,6 @@ _GLOBAL(enter_rtas) 1: tophys(r9,r1) lwz r8,INT_FRAME_SIZE+4(r9) /* get return address */ lwz r9,8(r9) /* original msr value */ - FIX_SRR1(r9,r0) addi r1,r1,INT_FRAME_SIZE li r0,0 mtspr SPRN_SPRG_RTAS,r0 diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index 9d963547d243..1607be7c0ef2 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -869,7 +869,6 @@ __secondary_start: /* enable MMU and jump to start_secondary */ li r4,MSR_KERNEL - FIX_SRR1(r4,r5) lis r3,start_secondary@h ori r3,r3,start_secondary@l mtspr SPRN_SRR0,r3 @@ -977,7 +976,6 @@ start_here: ori r4,r4,2f@l tophys(r4,r4) li r3,MSR_KERNEL & ~(MSR_IR|MSR_DR) - FIX_SRR1(r3,r5) mtspr SPRN_SRR0,r4 mtspr SPRN_SRR1,r3 SYNC @@ -1001,7 +999,6 @@ start_here: /* Now turn on the MMU for real! */ li r4,MSR_KERNEL - FIX_SRR1(r4,r5) lis r3,start_kernel@h ori r3,r3,start_kernel@l mtspr SPRN_SRR0,r3 -- cgit v1.2.3 From 75b824727680a9d12c34d78096a5ac642e53f5d0 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Thu, 15 Dec 2016 13:42:18 +0100 Subject: powerpc/8xx: Perf events on PPC 8xx This patch has been reworked since RFC version. In the RFC, this patch was preceded by a patch clearing MSR RI for all PPC32 at all time at exception prologs. Now MSR RI clearing is done only when this 8xx perf events functionality is compiled in, it is therefore limited to 8xx and merged inside this patch. Other main changes have been to take into account detailed review from Peter Zijlstra. The instructions counter has been reworked to behave as a free running counter like the three other counters. The 8xx has no PMU, however some events can be emulated by other means. This patch implements the following events (as reported by 'perf list'): cpu-cycles OR cycles [Hardware event] instructions [Hardware event] dTLB-load-misses [Hardware cache event] iTLB-load-misses [Hardware cache event] 'cycles' event is implemented using the timebase clock. Timebase clock corresponds to CPU clock divided by 16, so number of cycles is approximatly 16 times the number of TB ticks On the 8xx, TLB misses are handled by software. It is therefore easy to count all TLB misses each time the TLB miss exception is called. 'instructions' is calculated by using instruction watchpoint counter. This patch sets counter A to count instructions at address greater than 0, hence we count all instructions executed while MSR RI bit is set. The counter is set to the maximum which is 0xffff. Every 65535 instructions, debug instruction breakpoint exception fires. The exception handler increments a counter in memory which then represent the upper part of the instruction counter. We therefore end up with a 48 bits counter. In order to avoid unnecessary overhead while no perf event is active, this counter is started when the first event referring to this counter is added, and the counter is stopped when the last event referring to it is deleted. In order to properly support breakpoint exceptions, MSR RI bit has to be unset in exception epilogs in order to avoid breakpoint exceptions during critical sections during changes to SRR0 and SRR1 would be problematic. All counters are handled as free running counters. Signed-off-by: Christophe Leroy Signed-off-by: Scott Wood --- arch/powerpc/include/asm/reg.h | 2 + arch/powerpc/include/asm/reg_8xx.h | 4 + arch/powerpc/kernel/entry_32.S | 15 +++ arch/powerpc/kernel/head_8xx.S | 46 ++++++++- arch/powerpc/perf/8xx-pmu.c | 173 +++++++++++++++++++++++++++++++++ arch/powerpc/perf/Makefile | 2 + arch/powerpc/platforms/Kconfig.cputype | 7 ++ 7 files changed, 248 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/perf/8xx-pmu.c diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 0d4531aa2052..9098b35b46a8 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -548,7 +548,9 @@ #define SPRN_IBAT7U 0x236 /* Instruction BAT 7 Upper Register */ #define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */ #define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */ +#ifndef SPRN_ICTRL #define SPRN_ICTRL 0x3F3 /* 1011 7450 icache and interrupt ctrl */ +#endif #define ICTRL_EICE 0x08000000 /* enable icache parity errs */ #define ICTRL_EDC 0x04000000 /* enable dcache parity errs */ #define ICTRL_EICP 0x00000100 /* enable icache par. check */ diff --git a/arch/powerpc/include/asm/reg_8xx.h b/arch/powerpc/include/asm/reg_8xx.h index c52725b7085d..ae16fef7a4d6 100644 --- a/arch/powerpc/include/asm/reg_8xx.h +++ b/arch/powerpc/include/asm/reg_8xx.h @@ -28,12 +28,16 @@ /* Special MSR manipulation registers */ #define SPRN_EIE 80 /* External interrupt enable (EE=1, RI=1) */ #define SPRN_EID 81 /* External interrupt disable (EE=0, RI=1) */ +#define SPRN_NRI 82 /* Non recoverable interrupt (EE=0, RI=0) */ /* Debug registers */ +#define SPRN_CMPA 144 +#define SPRN_COUNTA 150 #define SPRN_CMPE 152 #define SPRN_CMPF 153 #define SPRN_LCTRL1 156 #define SPRN_LCTRL2 157 +#define SPRN_ICTRL 158 #define SPRN_BAR 159 /* Commands. Only the first few are available to the instruction cache. diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 980626ac34ee..f3e4fc1c1b4d 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -205,6 +205,9 @@ transfer_to_handler_cont: mflr r9 lwz r11,0(r9) /* virtual address of handler */ lwz r9,4(r9) /* where to go when done */ +#ifdef CONFIG_PPC_8xx_PERF_EVENT + mtspr SPRN_NRI, r0 +#endif #ifdef CONFIG_TRACE_IRQFLAGS lis r12,reenable_mmu@h ori r12,r12,reenable_mmu@l @@ -292,6 +295,9 @@ stack_ovf: lis r9,StackOverflow@ha addi r9,r9,StackOverflow@l LOAD_MSR_KERNEL(r10,MSR_KERNEL) +#ifdef CONFIG_PPC_8xx_PERF_EVENT + mtspr SPRN_NRI, r0 +#endif mtspr SPRN_SRR0,r9 mtspr SPRN_SRR1,r10 SYNC @@ -418,6 +424,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX) lwz r7,_NIP(r1) lwz r2,GPR2(r1) lwz r1,GPR1(r1) +#ifdef CONFIG_PPC_8xx_PERF_EVENT + mtspr SPRN_NRI, r0 +#endif mtspr SPRN_SRR0,r7 mtspr SPRN_SRR1,r8 SYNC @@ -701,6 +710,9 @@ fast_exception_return: lwz r10,_LINK(r11) mtlr r10 REST_GPR(10, r11) +#ifdef CONFIG_PPC_8xx_PERF_EVENT + mtspr SPRN_NRI, r0 +#endif mtspr SPRN_SRR1,r9 mtspr SPRN_SRR0,r12 REST_GPR(9, r11) @@ -949,6 +961,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX) .globl exc_exit_restart exc_exit_restart: lwz r12,_NIP(r1) +#ifdef CONFIG_PPC_8xx_PERF_EVENT + mtspr SPRN_NRI, r0 +#endif mtspr SPRN_SRR0,r12 mtspr SPRN_SRR1,r9 REST_4GPRS(9, r1) diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index 5fcbd79a121d..c032fe8c2d26 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -329,6 +329,12 @@ InstructionTLBMiss: mtspr SPRN_SPRG_SCRATCH2, r3 #endif EXCEPTION_PROLOG_0 +#ifdef CONFIG_PPC_8xx_PERF_EVENT + lis r10, (itlb_miss_counter - PAGE_OFFSET)@ha + lwz r11, (itlb_miss_counter - PAGE_OFFSET)@l(r10) + addi r11, r11, 1 + stw r11, (itlb_miss_counter - PAGE_OFFSET)@l(r10) +#endif /* If we are faulting a kernel address, we have to use the * kernel page tables. @@ -429,6 +435,12 @@ InstructionTLBMiss: DataStoreTLBMiss: mtspr SPRN_SPRG_SCRATCH2, r3 EXCEPTION_PROLOG_0 +#ifdef CONFIG_PPC_8xx_PERF_EVENT + lis r10, (dtlb_miss_counter - PAGE_OFFSET)@ha + lwz r11, (dtlb_miss_counter - PAGE_OFFSET)@l(r10) + addi r11, r11, 1 + stw r11, (dtlb_miss_counter - PAGE_OFFSET)@l(r10) +#endif mfcr r3 /* If we are faulting a kernel address, we have to use the @@ -625,7 +637,22 @@ DataBreakpoint: EXCEPTION_EPILOG_0 rfi +#ifdef CONFIG_PPC_8xx_PERF_EVENT + . = 0x1d00 +InstructionBreakpoint: + EXCEPTION_PROLOG_0 + lis r10, (instruction_counter - PAGE_OFFSET)@ha + lwz r11, (instruction_counter - PAGE_OFFSET)@l(r10) + addi r11, r11, -1 + stw r11, (instruction_counter - PAGE_OFFSET)@l(r10) + lis r10, 0xffff + ori r10, r10, 0x01 + mtspr SPRN_COUNTA, r10 + EXCEPTION_EPILOG_0 + rfi +#else EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE) +#endif EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE) EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE) @@ -999,9 +1026,13 @@ initial_mmu: lis r8, IDC_ENABLE@h mtspr SPRN_DC_CST, r8 #endif - /* Disable debug mode entry on data breakpoints */ + /* Disable debug mode entry on breakpoints */ mfspr r8, SPRN_DER +#ifdef CONFIG_PPC_8xx_PERF_EVENT + rlwinm r8, r8, 0, ~0xc +#else rlwinm r8, r8, 0, ~0x8 +#endif mtspr SPRN_DER, r8 blr @@ -1036,3 +1067,16 @@ cpu6_errata_word: .space 16 #endif +#ifdef CONFIG_PPC_8xx_PERF_EVENT + .globl itlb_miss_counter +itlb_miss_counter: + .space 4 + + .globl dtlb_miss_counter +dtlb_miss_counter: + .space 4 + + .globl instruction_counter +instruction_counter: + .space 4 +#endif diff --git a/arch/powerpc/perf/8xx-pmu.c b/arch/powerpc/perf/8xx-pmu.c new file mode 100644 index 000000000000..3c39f05f0af3 --- /dev/null +++ b/arch/powerpc/perf/8xx-pmu.c @@ -0,0 +1,173 @@ +/* + * Performance event support - PPC 8xx + * + * Copyright 2016 Christophe Leroy, CS Systemes d'Information + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PERF_8xx_ID_CPU_CYCLES 1 +#define PERF_8xx_ID_HW_INSTRUCTIONS 2 +#define PERF_8xx_ID_ITLB_LOAD_MISS 3 +#define PERF_8xx_ID_DTLB_LOAD_MISS 4 + +#define C(x) PERF_COUNT_HW_CACHE_##x +#define DTLB_LOAD_MISS (C(DTLB) | (C(OP_READ) << 8) | (C(RESULT_MISS) << 16)) +#define ITLB_LOAD_MISS (C(ITLB) | (C(OP_READ) << 8) | (C(RESULT_MISS) << 16)) + +extern unsigned long itlb_miss_counter, dtlb_miss_counter; +extern atomic_t instruction_counter; + +static atomic_t insn_ctr_ref; + +static s64 get_insn_ctr(void) +{ + int ctr; + unsigned long counta; + + do { + ctr = atomic_read(&instruction_counter); + counta = mfspr(SPRN_COUNTA); + } while (ctr != atomic_read(&instruction_counter)); + + return ((s64)ctr << 16) | (counta >> 16); +} + +static int event_type(struct perf_event *event) +{ + switch (event->attr.type) { + case PERF_TYPE_HARDWARE: + if (event->attr.config == PERF_COUNT_HW_CPU_CYCLES) + return PERF_8xx_ID_CPU_CYCLES; + if (event->attr.config == PERF_COUNT_HW_INSTRUCTIONS) + return PERF_8xx_ID_HW_INSTRUCTIONS; + break; + case PERF_TYPE_HW_CACHE: + if (event->attr.config == ITLB_LOAD_MISS) + return PERF_8xx_ID_ITLB_LOAD_MISS; + if (event->attr.config == DTLB_LOAD_MISS) + return PERF_8xx_ID_DTLB_LOAD_MISS; + break; + case PERF_TYPE_RAW: + break; + default: + return -ENOENT; + } + return -EOPNOTSUPP; +} + +static int mpc8xx_pmu_event_init(struct perf_event *event) +{ + int type = event_type(event); + + if (type < 0) + return type; + return 0; +} + +static int mpc8xx_pmu_add(struct perf_event *event, int flags) +{ + int type = event_type(event); + s64 val = 0; + + if (type < 0) + return type; + + switch (type) { + case PERF_8xx_ID_CPU_CYCLES: + val = get_tb(); + break; + case PERF_8xx_ID_HW_INSTRUCTIONS: + if (atomic_inc_return(&insn_ctr_ref) == 1) + mtspr(SPRN_ICTRL, 0xc0080007); + val = get_insn_ctr(); + break; + case PERF_8xx_ID_ITLB_LOAD_MISS: + val = itlb_miss_counter; + break; + case PERF_8xx_ID_DTLB_LOAD_MISS: + val = dtlb_miss_counter; + break; + } + local64_set(&event->hw.prev_count, val); + return 0; +} + +static void mpc8xx_pmu_read(struct perf_event *event) +{ + int type = event_type(event); + s64 prev, val = 0, delta = 0; + + if (type < 0) + return; + + do { + prev = local64_read(&event->hw.prev_count); + switch (type) { + case PERF_8xx_ID_CPU_CYCLES: + val = get_tb(); + delta = 16 * (val - prev); + break; + case PERF_8xx_ID_HW_INSTRUCTIONS: + val = get_insn_ctr(); + delta = prev - val; + if (delta < 0) + delta += 0x1000000000000LL; + break; + case PERF_8xx_ID_ITLB_LOAD_MISS: + val = itlb_miss_counter; + delta = (s64)((s32)val - (s32)prev); + break; + case PERF_8xx_ID_DTLB_LOAD_MISS: + val = dtlb_miss_counter; + delta = (s64)((s32)val - (s32)prev); + break; + } + } while (local64_cmpxchg(&event->hw.prev_count, prev, val) != prev); + + local64_add(delta, &event->count); +} + +static void mpc8xx_pmu_del(struct perf_event *event, int flags) +{ + mpc8xx_pmu_read(event); + if (event_type(event) != PERF_8xx_ID_HW_INSTRUCTIONS) + return; + + /* If it was the last user, stop counting to avoid useles overhead */ + if (atomic_dec_return(&insn_ctr_ref) == 0) + mtspr(SPRN_ICTRL, 7); +} + +static struct pmu mpc8xx_pmu = { + .event_init = mpc8xx_pmu_event_init, + .add = mpc8xx_pmu_add, + .del = mpc8xx_pmu_del, + .read = mpc8xx_pmu_read, + .capabilities = PERF_PMU_CAP_NO_INTERRUPT | + PERF_PMU_CAP_NO_NMI, +}; + +static int init_mpc8xx_pmu(void) +{ + mtspr(SPRN_ICTRL, 7); + mtspr(SPRN_CMPA, 0); + mtspr(SPRN_COUNTA, 0xffff); + + return perf_pmu_register(&mpc8xx_pmu, "cpu", PERF_TYPE_RAW); +} + +early_initcall(init_mpc8xx_pmu); diff --git a/arch/powerpc/perf/Makefile b/arch/powerpc/perf/Makefile index f102d5370101..4d606b99a5cb 100644 --- a/arch/powerpc/perf/Makefile +++ b/arch/powerpc/perf/Makefile @@ -13,5 +13,7 @@ obj-$(CONFIG_FSL_EMB_PERF_EVENT_E500) += e500-pmu.o e6500-pmu.o obj-$(CONFIG_HV_PERF_CTRS) += hv-24x7.o hv-gpci.o hv-common.o +obj-$(CONFIG_PPC_8xx_PERF_EVENT) += 8xx-pmu.o + obj-$(CONFIG_PPC64) += $(obj64-y) obj-$(CONFIG_PPC32) += $(obj32-y) diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 6e89e5a8d4fb..99b0ae8acb78 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -172,6 +172,13 @@ config PPC_FPU bool default y if PPC64 +config PPC_8xx_PERF_EVENT + bool "PPC 8xx perf events" + depends on PPC_8xx && PERF_EVENTS + help + This is Performance Events support for PPC 8xx. The 8xx doesn't + have a PMU but some events are emulated using 8xx features. + config FSL_EMB_PERFMON bool "Freescale Embedded Perfmon" depends on E500 || PPC_83xx -- cgit v1.2.3