From 6bd47ac2e434611e52027155438d7b4ad3c76bdb Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 27 Jun 2012 07:33:36 +0000 Subject: netdev/phy/of: Handle IEEE802.3 clause 45 Ethernet PHYs in of_mdiobus_register() Define two new "compatible" values for Ethernet PHYs. "ethernet-phy-ieee802.3-c22" and "ethernet-phy-ieee802.3-c45" are used to indicate a PHY uses the corresponding protocol. If a PHY is "compatible" with "ethernet-phy-ieee802.3-c45", we indicate this so that get_phy_device() can properly probe the device. If get_phy_device() fails, it was probably due to failing the probe of the PHY identifier registers. Since we have the device tree telling us the PHY exists, go ahead and add it anyhow with a phy_id of zero. There may be a driver match based on the "compatible" property. Signed-off-by: David Daney Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/phy.txt | 12 +++++++++++- drivers/of/of_mdio.c | 16 ++++++++++++---- 2 files changed, 23 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt index bb8c742eb8c5..7cd18fbfcf71 100644 --- a/Documentation/devicetree/bindings/net/phy.txt +++ b/Documentation/devicetree/bindings/net/phy.txt @@ -14,10 +14,20 @@ Required properties: - linux,phandle : phandle for this node; likely referenced by an ethernet controller node. +Optional Properties: + +- compatible: Compatible list, may contain + "ethernet-phy-ieee802.3-c22" or "ethernet-phy-ieee802.3-c45" for + PHYs that implement IEEE802.3 clause 22 or IEEE802.3 clause 45 + specifications. If neither of these are specified, the default is to + assume clause 22. The compatible list may also contain other + elements. + Example: ethernet-phy@0 { - linux,phandle = <2452000> + compatible = "ethernet-phy-ieee802.3-c22"; + linux,phandle = <2452000>; interrupt-parent = <40000>; interrupts = <35 1>; reg = <0>; diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index 6c24cad322df..8e6c25f35040 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -57,6 +57,7 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np) const __be32 *paddr; u32 addr; int len; + bool is_c45; /* A PHY must have a reg property in the range [0-31] */ paddr = of_get_property(child, "reg", &len); @@ -79,11 +80,18 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np) mdio->irq[addr] = PHY_POLL; } - phy = get_phy_device(mdio, addr, false); + is_c45 = of_device_is_compatible(child, + "ethernet-phy-ieee802.3-c45"); + phy = get_phy_device(mdio, addr, is_c45); + if (!phy || IS_ERR(phy)) { - dev_err(&mdio->dev, "error probing PHY at address %i\n", - addr); - continue; + phy = phy_device_create(mdio, addr, 0, false, NULL); + if (!phy || IS_ERR(phy)) { + dev_err(&mdio->dev, + "error creating PHY at address %i\n", + addr); + continue; + } } /* Associate the OF node with the device structure so it -- cgit v1.2.3