From 1df79cb3bae754e4a42240f9851ed82549a44f1a Mon Sep 17 00:00:00 2001 From: Arvind Yadav Date: Wed, 20 Sep 2017 12:35:57 +0530 Subject: phy: tegra: Handle return value of kasprintf kasprintf() can fail and it's return value must be checked. Signed-off-by: Arvind Yadav Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/tegra/xusb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c index 3cbcb2537657..4307bf0013e1 100644 --- a/drivers/phy/tegra/xusb.c +++ b/drivers/phy/tegra/xusb.c @@ -454,6 +454,8 @@ tegra_xusb_find_port_node(struct tegra_xusb_padctl *padctl, const char *type, char *name; name = kasprintf(GFP_KERNEL, "%s-%u", type, index); + if (!name) + return ERR_PTR(-ENOMEM); np = of_find_node_by_name(np, name); kfree(name); } -- cgit v1.2.3 From 554a56fc83f679c73b4f851a330045d0ec7ec1a5 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Thu, 21 Sep 2017 18:31:48 +0800 Subject: phy: phy-mtk-tphy: fix NULL point of chip bank Chip bank of version-1 is initialized as NULL, but it's used by pcie_phy_instance_power_on/off(), so assign it a right address. Signed-off-by: Chunfeng Yun Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/mediatek/phy-mtk-tphy.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c index e3baad78521f..721a2a1c97ef 100644 --- a/drivers/phy/mediatek/phy-mtk-tphy.c +++ b/drivers/phy/mediatek/phy-mtk-tphy.c @@ -27,6 +27,7 @@ /* banks shared by multiple phys */ #define SSUSB_SIFSLV_V1_SPLLC 0x000 /* shared by u3 phys */ #define SSUSB_SIFSLV_V1_U2FREQ 0x100 /* shared by u2 phys */ +#define SSUSB_SIFSLV_V1_CHIP 0x300 /* shared by u3 phys */ /* u2 phy bank */ #define SSUSB_SIFSLV_V1_U2PHY_COM 0x000 /* u3/pcie/sata phy banks */ @@ -762,7 +763,7 @@ static void phy_v1_banks_init(struct mtk_tphy *tphy, case PHY_TYPE_USB3: case PHY_TYPE_PCIE: u3_banks->spllc = tphy->sif_base + SSUSB_SIFSLV_V1_SPLLC; - u3_banks->chip = NULL; + u3_banks->chip = tphy->sif_base + SSUSB_SIFSLV_V1_CHIP; u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD; u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V1_U3PHYA; break; -- cgit v1.2.3 From caef3e0b657d091a540232e07e5e5b4648110a52 Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Mon, 18 Sep 2017 10:04:20 +0200 Subject: phy: mvebu-cp110-comphy: fix mux error check The mux value is retrieved from the mvebu_comphy_get_mux() function which returns an int. In mvebu_comphy_power_on() this int is stored to a u32 and a check is made to ensure it's not negative. Which is wrong. This fixes it. Fixes: d0438bd6aa09 ("phy: add the mvebu cp110 comphy driver") Signed-off-by: Antoine Tenart Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c index 73ebad6634a7..514a1a47e1fd 100644 --- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c +++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c @@ -468,8 +468,8 @@ static int mvebu_comphy_power_on(struct phy *phy) { struct mvebu_comphy_lane *lane = phy_get_drvdata(phy); struct mvebu_comphy_priv *priv = lane->priv; - int ret; - u32 mux, val; + int ret, mux; + u32 val; mux = mvebu_comphy_get_mux(lane->id, lane->port, lane->mode); if (mux < 0) -- cgit v1.2.3 From 17fb745d4acfe52f9ebb1ba2b10f2fcd796fb5ce Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Mon, 18 Sep 2017 10:04:22 +0200 Subject: phy: mvebu-cp110-comphy: explicitly set the pipe selector The pipe selector is used to select some modes (such as USB or PCIe). Otherwise it must be set to 0 (or "unconnected"). This patch does this to ensure it is not set to an incompatible value when using the supported modes (SGMII, 10GKR). Signed-off-by: Antoine Tenart Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c index 514a1a47e1fd..e8ed7e3e6e23 100644 --- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c +++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c @@ -111,6 +111,8 @@ #define MVEBU_COMPHY_CONF6_40B BIT(18) #define MVEBU_COMPHY_SELECTOR 0x1140 #define MVEBU_COMPHY_SELECTOR_PHY(n) ((n) * 0x4) +#define MVEBU_COMPHY_PIPE_SELECTOR 0x1144 +#define MVEBU_COMPHY_PIPE_SELECTOR_PIPE(n) ((n) * 0x4) #define MVEBU_COMPHY_LANES 6 #define MVEBU_COMPHY_PORTS 3 @@ -475,6 +477,10 @@ static int mvebu_comphy_power_on(struct phy *phy) if (mux < 0) return -ENOTSUPP; + regmap_read(priv->regmap, MVEBU_COMPHY_PIPE_SELECTOR, &val); + val &= ~(0xf << MVEBU_COMPHY_PIPE_SELECTOR_PIPE(lane->id)); + regmap_write(priv->regmap, MVEBU_COMPHY_PIPE_SELECTOR, val); + regmap_read(priv->regmap, MVEBU_COMPHY_SELECTOR, &val); val &= ~(0xf << MVEBU_COMPHY_SELECTOR_PHY(lane->id)); val |= mux << MVEBU_COMPHY_SELECTOR_PHY(lane->id); @@ -526,6 +532,10 @@ static int mvebu_comphy_power_off(struct phy *phy) val &= ~(0xf << MVEBU_COMPHY_SELECTOR_PHY(lane->id)); regmap_write(priv->regmap, MVEBU_COMPHY_SELECTOR, val); + regmap_read(priv->regmap, MVEBU_COMPHY_PIPE_SELECTOR, &val); + val &= ~(0xf << MVEBU_COMPHY_PIPE_SELECTOR_PIPE(lane->id)); + regmap_write(priv->regmap, MVEBU_COMPHY_PIPE_SELECTOR, val); + return 0; } -- cgit v1.2.3 From c1c7acac0998ffcc9cd81e016a7d1b58b1afbb51 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 8 Sep 2017 13:31:37 +0300 Subject: phy: mvebu-cp110: checking for NULL instead of IS_ERR() devm_ioremap_resource() never returns NULL, it only returns error pointers so this test needs to be changed. Fixes: d0438bd6aa09 ("phy: add the mvebu cp110 comphy driver") Signed-off-by: Dan Carpenter Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c index e8ed7e3e6e23..89c887ea5557 100644 --- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c +++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c @@ -586,8 +586,8 @@ static int mvebu_comphy_probe(struct platform_device *pdev) return PTR_ERR(priv->regmap); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); priv->base = devm_ioremap_resource(&pdev->dev, res); - if (!priv->base) - return -ENOMEM; + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); for_each_available_child_of_node(pdev->dev.of_node, child) { struct mvebu_comphy_lane *lane; -- cgit v1.2.3 From f98b74387551f6d266c044d90e87e4919b25b970 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Fri, 22 Sep 2017 09:44:03 -0700 Subject: phy: rockchip-typec: Set the AUX channel flip state earlier On some DP monitors we found that setting the wrong flip state on the AUX channel could cause the monitor to stop asserting HotPlug Detect (HPD). Setting the right flip state caused these monitors to start asserting HotPlug Detect again. Here's what we believe was happening: * We'd plug in the monitor and we'd see HPD assert * We'd quickly see HPD deassert * The kernel would try to init the type C PHY but would init it in USB mode (because there was a peripheral there but no HPD) * Because the kernel never set the flip mode properly we'd never see the HPD come back. With this change, we'll still see HPD disappear (we don't think there's anything we can do about that), but then it will come back. Overall we can say that it's sane to set the AUX channel flip state even when HPD is not asserted. NOTE: to make this change possible, I needed to do a bit of cleanup to the tcphy_dp_aux_calibration() function so that it doesn't ever clobber the FLIP state. This made it very obvious that a line of code documented as "setting bit 12" also did a bunch of other magic, undocumented stuff. For now I'll just break out the bits and add a comment that this is black magic and we'll try to document tcphy_dp_aux_calibration() better in a future CL. ALSO NOTE: the old function used to write a bunch of hardcoded values in _some_ cases instead of doing a read-modify-write. One could possibly assert that these could have had (beneficial) side effects and thus with this new code (which always does read-modify-write) we could have a bug. We shouldn't need to worry, though, since in the old code tcphy_dp_aux_calibration() was always called following the de-assertion of "reset" the the type C PHY. ...so the type C PHY was always in default state. TX_ANA_CTRL_REG_1 is documented to be 0x0 after reset. This was also confirmed by printk. Suggested-by: Shawn Nematbakhsh Reviewed-by: Chris Zhong Signed-off-by: Douglas Anderson Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/rockchip/phy-rockchip-typec.c | 62 +++++++++++++++++++++---------- 1 file changed, 42 insertions(+), 20 deletions(-) diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c index 4d2c57f21d76..342a77733207 100644 --- a/drivers/phy/rockchip/phy-rockchip-typec.c +++ b/drivers/phy/rockchip/phy-rockchip-typec.c @@ -443,14 +443,34 @@ static inline int property_enable(struct rockchip_typec_phy *tcphy, return regmap_write(tcphy->grf_regs, reg->offset, val | mask); } +static void tcphy_dp_aux_set_flip(struct rockchip_typec_phy *tcphy) +{ + u16 tx_ana_ctrl_reg_1; + + /* + * Select the polarity of the xcvr: + * 1, Reverses the polarity (If TYPEC, Pulls ups aux_p and pull + * down aux_m) + * 0, Normal polarity (if TYPEC, pulls up aux_m and pulls down + * aux_p) + */ + tx_ana_ctrl_reg_1 = readl(tcphy->base + TX_ANA_CTRL_REG_1); + if (!tcphy->flip) + tx_ana_ctrl_reg_1 |= BIT(12); + else + tx_ana_ctrl_reg_1 &= ~BIT(12); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); +} + static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) { + u16 tx_ana_ctrl_reg_1; u16 rdata, rdata2, val; /* disable txda_cal_latch_en for rewrite the calibration values */ - rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1); - val = rdata & 0xdfff; - writel(val, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 = readl(tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 &= ~BIT(13); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); /* * read a resistor calibration code from CMN_TXPUCAL_CTRL[6:0] and @@ -472,9 +492,8 @@ static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) * Activate this signal for 1 clock cycle to sample new calibration * values. */ - rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1); - val = rdata | 0x2000; - writel(val, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 |= BIT(13); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); usleep_range(150, 200); /* set TX Voltage Level and TX Deemphasis to 0 */ @@ -482,8 +501,10 @@ static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) /* re-enable decap */ writel(0x100, tcphy->base + TX_ANA_CTRL_REG_2); writel(0x300, tcphy->base + TX_ANA_CTRL_REG_2); - writel(0x2008, tcphy->base + TX_ANA_CTRL_REG_1); - writel(0x2018, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 |= BIT(3); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 |= BIT(4); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); writel(0, tcphy->base + TX_ANA_CTRL_REG_5); @@ -494,8 +515,10 @@ static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) writel(0x1001, tcphy->base + TX_ANA_CTRL_REG_4); /* re-enables Bandgap reference for LDO */ - writel(0x2098, tcphy->base + TX_ANA_CTRL_REG_1); - writel(0x2198, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 |= BIT(7); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 |= BIT(8); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); /* * re-enables the transmitter pre-driver, driver data selection MUX, @@ -505,17 +528,15 @@ static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) writel(0x303, tcphy->base + TX_ANA_CTRL_REG_2); /* - * BIT 12: Controls auxda_polarity, which selects the polarity of the - * xcvr: - * 1, Reverses the polarity (If TYPEC, Pulls ups aux_p and pull - * down aux_m) - * 0, Normal polarity (if TYPE_C, pulls up aux_m and pulls down - * aux_p) + * Do some magic undocumented stuff, some of which appears to + * undo the "re-enables Bandgap reference for LDO" above. */ - val = 0xa078; - if (!tcphy->flip) - val |= BIT(12); - writel(val, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 |= BIT(15); + tx_ana_ctrl_reg_1 &= ~BIT(8); + tx_ana_ctrl_reg_1 &= ~BIT(7); + tx_ana_ctrl_reg_1 |= BIT(6); + tx_ana_ctrl_reg_1 |= BIT(5); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); writel(0, tcphy->base + TX_ANA_CTRL_REG_3); writel(0, tcphy->base + TX_ANA_CTRL_REG_4); @@ -555,6 +576,7 @@ static int tcphy_phy_init(struct rockchip_typec_phy *tcphy, u8 mode) reset_control_deassert(tcphy->tcphy_rst); property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip); + tcphy_dp_aux_set_flip(tcphy); tcphy_cfg_24m(tcphy); -- cgit v1.2.3 From 26e03d803c8191e906360a0320c05b12d45a37ae Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Fri, 22 Sep 2017 09:44:04 -0700 Subject: phy: rockchip-typec: Don't set the aux voltage swing to 400 mV On rk3399-gru-kevin there are some cases where we're seeing AUX CH failures when trying to do DisplayPort over type C. Problems are intermittent and don't reproduce all the time. Problems are often bursty and failures persist for several seconds before going away. The failure case I focused on is: * A particular type C to HDMI adapter. * One orientation (flip mode) of that adapter. * Easier to see failures when something is plugged into the _other type C port at the same time. * Problems reproduce on both type C ports (left and right side). Ironically problems also stop reproducing when I solder wires onto the AUX CH signals on a port (even if no scope is connected to the signals). In this case, problems only stop reproducing on the port with the wires connected. From the above it appears that something about the signaling on the aux channel is marginal and any slight differences can bring us over the edge to failure. It turns out that we can fix our problems by just increasing the voltage swing of the AUX CH, giving us a bunch of extra margin. In DP up to version 1.2 the voltage swing on the aux channel was specced as .29 V to 1.38 V. In DP version 1.3 the aux channel voltage was tightened to be between .29 V and .40 V, but it clarifies that it really only needs the lower voltage when operating at the highest speed (HBR3 mode). So right now we are trying to use a voltage that technically should be valid for all versions of the spec (including version 1.3 when transmitting at HBR3). That would be great to do if it worked reliably. ...but it doesn't seem to. It turns out that if you continue to read through the DP part of the rk3399 TRM and other parts of the type C PHY spec you'll find out that while the rk3399 does support DP 1.3, it doesn't support HBR3. The docs specifically say "RBR, HBR and HBR2 data rates only". Thus there is actually no requirement to support an AUX CH swing of .4 V. Even if there is no actual requirement to support the tighter voltage swing, one could possibly argue that we should support it anyway. The DP spec clarifies that the lower voltage on the AUX CH will reduce cross talk in some cases and that seems like it could be beneficial even at the lower bit rates. At the moment, though, we are seeing problems with the AUX CH and not on the other lines. Also, checking another known working and similar laptop shows that the other laptop runs the AUX channel at a higher voltage. Other notes: * Looking at measurements done on the AUX CH we weren't actually compliant with the DP 1.3 spec anyway. AUX CH peek-to-peek voltage was measured on rk3399-gru-kevin as .466 V which is > .4 V. * With this new patch the AUX channel isn't actually 1.0 V, but it has been confirmed that the signal is better and has more margin. Eye diagram passes. * If someone were truly an expert in the Type C PHY and in DisplayPort signaling they might be able to make things work and keep the voltage at < .4 V. The Type C PHY seems to have a plethora of tuning knobs that could almost certainly improve the signal integrity. Some of these things (like enabling tx_fcm_full_margin) even seem to fix my problems. However, lacking expertise I can't say whether this is a better or worse solution. Tightening signals to give cleaner waveforms can often have adverse affects, like increasing EMI or adding noise to other signals. I'd rather not tune things like this without a healthy application of expertise that I don't have. Signed-off-by: Douglas Anderson Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/rockchip/phy-rockchip-typec.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c index 342a77733207..b25c00432f9b 100644 --- a/drivers/phy/rockchip/phy-rockchip-typec.c +++ b/drivers/phy/rockchip/phy-rockchip-typec.c @@ -543,10 +543,11 @@ static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) writel(0, tcphy->base + TX_ANA_CTRL_REG_5); /* - * Controls low_power_swing_en, set the voltage swing of the driver - * to 400mv. The values below are peak to peak (differential) values. + * Controls low_power_swing_en, don't set the voltage swing of the + * driver to 400mv. The values below are peak to peak (differential) + * values. */ - writel(4, tcphy->base + TXDA_COEFF_CALC_CTRL); + writel(0, tcphy->base + TXDA_COEFF_CALC_CTRL); writel(0, tcphy->base + TXDA_CYA_AUXDA_CYA); /* Controls tx_high_z_tm_en */ -- cgit v1.2.3 From 2fb850092fd95198a0a4746f07b80077d5a3aa37 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Fri, 29 Sep 2017 16:58:46 -0700 Subject: phy: rockchip-typec: Check for errors from tcphy_phy_init() The function tcphy_phy_init() could return an error but the callers weren't checking the return value. They should. In at least one case while testing I saw the message "wait pma ready timeout" which indicates that tcphy_phy_init() really could return an error and we should account for it. Signed-off-by: Douglas Anderson Reviewed-by: Guenter Roeck Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/rockchip/phy-rockchip-typec.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c index b25c00432f9b..a958c9bced01 100644 --- a/drivers/phy/rockchip/phy-rockchip-typec.c +++ b/drivers/phy/rockchip/phy-rockchip-typec.c @@ -708,8 +708,11 @@ static int rockchip_usb3_phy_power_on(struct phy *phy) if (tcphy->mode == new_mode) goto unlock_ret; - if (tcphy->mode == MODE_DISCONNECT) - tcphy_phy_init(tcphy, new_mode); + if (tcphy->mode == MODE_DISCONNECT) { + ret = tcphy_phy_init(tcphy, new_mode); + if (ret) + goto unlock_ret; + } /* wait TCPHY for pipe ready */ for (timeout = 0; timeout < 100; timeout++) { @@ -783,10 +786,12 @@ static int rockchip_dp_phy_power_on(struct phy *phy) */ if (new_mode == MODE_DFP_DP && tcphy->mode != MODE_DISCONNECT) { tcphy_phy_deinit(tcphy); - tcphy_phy_init(tcphy, new_mode); + ret = tcphy_phy_init(tcphy, new_mode); } else if (tcphy->mode == MODE_DISCONNECT) { - tcphy_phy_init(tcphy, new_mode); + ret = tcphy_phy_init(tcphy, new_mode); } + if (ret) + goto unlock_ret; ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL, val, val & DP_MODE_A2, 1000, -- cgit v1.2.3 From 31dc3f819bac28a0990b36510197560258ab7421 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 12 Oct 2017 14:50:46 +0200 Subject: USB: serial: metro-usb: add MS7820 device id Add device-id entry for (Honeywell) Metrologic MS7820 bar code scanner. The device has two interfaces (in this mode?); a vendor-specific interface with two interrupt endpoints and a second HID interface, which we do not bind to. Reported-by: Ladislav Dobrovsky Tested-by: Ladislav Dobrovsky Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/metro-usb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index cc84da8dbb84..14511d6a7d44 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -45,6 +45,7 @@ struct metrousb_private { static const struct usb_device_id id_table[] = { { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_BI) }, { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_UNI) }, + { USB_DEVICE_INTERFACE_CLASS(0x0c2e, 0x0730, 0xff) }, /* MS7820 */ { }, /* Terminating entry. */ }; MODULE_DEVICE_TABLE(usb, id_table); -- cgit v1.2.3 From ea7d0d69426cab6747ed311c53f4142eb48b9454 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Fri, 6 Oct 2017 17:45:27 +0300 Subject: xhci: Identify USB 3.1 capable hosts by their port protocol capability Many USB 3.1 capable hosts never updated the Serial Bus Release Number (SBRN) register to USB 3.1 from USB 3.0 xhci driver identified USB 3.1 capable hosts based on this SBRN register, which according to specs "contains the release of the Universal Serial Bus Specification with which this Universal Serial Bus Host Controller module is compliant." but still in october 2017 gives USB 3.0 as the only possible option. Make an additional check for USB 3.1 support and enable it if the xHCI supported protocol capablity lists USB 3.1 capable ports. Cc: # v4.6+ Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index ee198ea47f49..51535ba2bcd4 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -4805,7 +4805,8 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) */ hcd->has_tt = 1; } else { - if (xhci->sbrn == 0x31) { + /* Some 3.1 hosts return sbrn 0x30, can't rely on sbrn alone */ + if (xhci->sbrn == 0x31 || xhci->usb3_rhub.min_rev >= 1) { xhci_info(xhci, "Host supports USB 3.1 Enhanced SuperSpeed\n"); hcd->speed = HCD_USB31; hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS; -- cgit v1.2.3 From d1aad52cf8b3f95dfe9b5b64da66343306ddf73b Mon Sep 17 00:00:00 2001 From: Jeffy Chen Date: Fri, 6 Oct 2017 17:45:28 +0300 Subject: xhci: Cleanup current_cmd in xhci_cleanup_command_queue() KASAN reported use-after-free bug when xhci host controller died: [ 176.952537] BUG: KASAN: use-after-free in xhci_handle_command_timeout+0x68/0x224 [ 176.960846] Write of size 4 at addr ffffffc0cbb01608 by task kworker/3:3/1680 ... [ 177.180644] Freed by task 0: [ 177.183882] kasan_slab_free+0x90/0x15c [ 177.188194] kfree+0x114/0x28c [ 177.191630] xhci_cleanup_command_queue+0xc8/0xf8 [ 177.196916] xhci_hc_died+0x84/0x358 Problem here is that when the cmd_timer fired, it would try to access current_cmd while the command queue is already freed by xhci_hc_died(). Cleanup current_cmd in xhci_cleanup_command_queue() to avoid that. Fixes: d9f11ba9f107 ("xhci: Rework how we handle unresponsive or hoptlug removed hosts") Cc: # v4.12+ Signed-off-by: Jeffy Chen Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index a9443651ce0f..48ae15afa59e 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1309,6 +1309,7 @@ static void xhci_complete_del_and_free_cmd(struct xhci_command *cmd, u32 status) void xhci_cleanup_command_queue(struct xhci_hcd *xhci) { struct xhci_command *cur_cmd, *tmp_cmd; + xhci->current_cmd = NULL; list_for_each_entry_safe(cur_cmd, tmp_cmd, &xhci->cmd_list, cmd_list) xhci_complete_del_and_free_cmd(cur_cmd, COMP_COMMAND_ABORTED); } -- cgit v1.2.3 From 810a624bd1b64b13ddcc2eb5c1880526a750a870 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Fri, 6 Oct 2017 17:45:29 +0300 Subject: usb: xhci: Reset halted endpoint if trb is noop When a URB is cancled, xhci driver turns the untransferred trbs into no-ops. If an endpoint stalls on a no-op trb that belongs to the cancelled URB, the event handler won't reset the endpoint. Hence, it will stay halted. Link: http://marc.info/?l=linux-usb&m=149582598330127&w=2 Cc: Signed-off-by: Lu Baolu Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 48ae15afa59e..82c746e2d85c 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2580,15 +2580,21 @@ static int handle_tx_event(struct xhci_hcd *xhci, (struct xhci_generic_trb *) ep_trb); /* - * No-op TRB should not trigger interrupts. - * If ep_trb is a no-op TRB, it means the - * corresponding TD has been cancelled. Just ignore - * the TD. + * No-op TRB could trigger interrupts in a case where + * a URB was killed and a STALL_ERROR happens right + * after the endpoint ring stopped. Reset the halted + * endpoint. Otherwise, the endpoint remains stalled + * indefinitely. */ if (trb_is_noop(ep_trb)) { - xhci_dbg(xhci, - "ep_trb is a no-op TRB. Skip it for slot %u ep %u\n", - slot_id, ep_index); + if (trb_comp_code == COMP_STALL_ERROR || + xhci_requires_manual_halt_cleanup(xhci, ep_ctx, + trb_comp_code)) + xhci_cleanup_halted_endpoint(xhci, slot_id, + ep_index, + ep_ring->stream_id, + td, ep_trb, + EP_HARD_RESET); goto cleanup; } -- cgit v1.2.3 From b3207c65dfafae27e7c492cb9188c0dc0eeaf3fd Mon Sep 17 00:00:00 2001 From: Mayank Rana Date: Fri, 6 Oct 2017 17:45:30 +0300 Subject: usb: xhci: Handle error condition in xhci_stop_device() xhci_stop_device() calls xhci_queue_stop_endpoint() multiple times without checking the return value. xhci_queue_stop_endpoint() can return error if the HC is already halted or unable to queue commands. This can cause a deadlock condition as xhci_stop_device() would end up waiting indefinitely for a completion for the command that didn't get queued. Fix this by checking the return value and bailing out of xhci_stop_device() in case of error. This patch happens to fix potential memory leaks of the allocated command structures as well. Fixes: c311e391a7ef ("xhci: rework command timeout and cancellation,") Cc: Signed-off-by: Mayank Rana Signed-off-by: Jack Pham Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index da9158f171cb..a2336deb5e36 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -420,14 +420,25 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend) GFP_NOWAIT); if (!command) { spin_unlock_irqrestore(&xhci->lock, flags); - xhci_free_command(xhci, cmd); - return -ENOMEM; + ret = -ENOMEM; + goto cmd_cleanup; + } + + ret = xhci_queue_stop_endpoint(xhci, command, slot_id, + i, suspend); + if (ret) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_free_command(xhci, command); + goto cmd_cleanup; } - xhci_queue_stop_endpoint(xhci, command, slot_id, i, - suspend); } } - xhci_queue_stop_endpoint(xhci, cmd, slot_id, 0, suspend); + ret = xhci_queue_stop_endpoint(xhci, cmd, slot_id, 0, suspend); + if (ret) { + spin_unlock_irqrestore(&xhci->lock, flags); + goto cmd_cleanup; + } + xhci_ring_cmd_db(xhci); spin_unlock_irqrestore(&xhci->lock, flags); @@ -439,6 +450,8 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend) xhci_warn(xhci, "Timeout while waiting for stop endpoint command\n"); ret = -ETIME; } + +cmd_cleanup: xhci_free_command(xhci, cmd); return ret; } -- cgit v1.2.3 From 845d584f41eac3475c21e4a7d5e88d0f6e410cf7 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 16 Oct 2017 16:21:19 +0200 Subject: USB: devio: Revert "USB: devio: Don't corrupt user memory" Taking the uurb->buffer_length userspace passes in as a maximum for the actual urbs transfer_buffer_length causes 2 serious issues: 1) It breaks isochronous support for all userspace apps using libusb, as existing libusb versions pass in 0 for uurb->buffer_length, relying on the kernel using the lenghts of the usbdevfs_iso_packet_desc descriptors passed in added together as buffer length. This for example causes redirection of USB audio and Webcam's into virtual machines using qemu-kvm to no longer work. This is a userspace ABI break and as such must be reverted. Note that the original commit does not protect other users / the kernels memory, it only stops the userspace process making the call from shooting itself in the foot. 2) It may cause the kernel to program host controllers to DMA over random memory. Just as the devio code used to only look at the iso_packet_desc lenghts, the host drivers do the same, relying on the submitter of the urbs to make sure the entire buffer is large enough and not checking transfer_buffer_length. But the "USB: devio: Don't corrupt user memory" commit now takes the userspace provided uurb->buffer_length for the buffer-size while copying over the user-provided iso_packet_desc lengths 1:1, allowing the user to specify a small buffer size while programming the host controller to dma a lot more data. (Atleast the ohci, uhci, xhci and fhci drivers do not check transfer_buffer_length for isoc transfers.) This reverts commit fa1ed74eb1c2 ("USB: devio: Don't corrupt user memory") fixing both these issues. Cc: Dan Carpenter Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 4664e543cf2f..e9326f31db8d 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1576,11 +1576,7 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb totlen += isopkt[u].length; } u *= sizeof(struct usb_iso_packet_descriptor); - if (totlen <= uurb->buffer_length) - uurb->buffer_length = totlen; - else - WARN_ONCE(1, "uurb->buffer_length is too short %d vs %d", - totlen, uurb->buffer_length); + uurb->buffer_length = totlen; break; default: -- cgit v1.2.3 From 765fb2f181cad669f2beb87842a05d8071f2be85 Mon Sep 17 00:00:00 2001 From: Maksim Salau Date: Wed, 11 Oct 2017 11:10:52 +0300 Subject: usb: cdc_acm: Add quirk for Elatec TWN3 Elatec TWN3 has the union descriptor on data interface. This results in failure to bind the device to the driver with the following log: usb 1-1.2: new full speed USB device using streamplug-ehci and address 4 usb 1-1.2: New USB device found, idVendor=09d8, idProduct=0320 usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.2: Product: RFID Device (COM) usb 1-1.2: Manufacturer: OEM cdc_acm 1-1.2:1.0: Zero length descriptor references cdc_acm: probe of 1-1.2:1.0 failed with error -22 Adding the NO_UNION_NORMAL quirk for the device fixes the issue. `lsusb -v` of the device: Bus 001 Device 003: ID 09d8:0320 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 32 idVendor 0x09d8 idProduct 0x0320 bcdDevice 3.00 iManufacturer 1 OEM iProduct 2 RFID Device (COM) iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 67 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 250mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 2 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 CDC Header: bcdCDC 1.10 CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 CDC ACM: bmCapabilities 0x06 sends break line coding and serial state CDC Union: bMasterInterface 0 bSlaveInterface 1 Device Status: 0x0000 (Bus Powered) Signed-off-by: Maksim Salau Acked-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 5e056064259c..18c923a4c16e 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1832,6 +1832,9 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0xfff0, 0x0100), /* DATECS FP-2000 */ .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ }, + { USB_DEVICE(0x09d8, 0x0320), /* Elatec GmbH TWN3 */ + .driver_info = NO_UNION_NORMAL, /* has misplaced union descriptor */ + }, { USB_DEVICE(0x2912, 0x0001), /* ATOL FPrint */ .driver_info = CLEAR_HALT_CONDITIONS, -- cgit v1.2.3 From 4f190e0b9de89c4c917c3ffb3799e9d00fc534ac Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 9 Oct 2017 22:46:07 -0500 Subject: USB: musb: fix session-bit runtime-PM quirk The current session-bit quirk implementation does not prevent the retry counter from underflowing, something which could break runtime PM and keep the device active for a very long time (about 2^32 seconds) after a disconnect. This notably breaks the B-device timeout case, but could potentially cause problems also when the controller is operating as an A-device. Fixes: 2bff3916fda9 ("usb: musb: Fix PM for hub disconnect") Cc: stable # 4.9 Cc: Tony Lindgren Signed-off-by: Johan Hovold Tested-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 029692053dd3..07b8c7152e3d 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1861,22 +1861,22 @@ static void musb_pm_runtime_check_session(struct musb *musb) MUSB_DEVCTL_HR; switch (devctl & ~s) { case MUSB_QUIRK_B_INVALID_VBUS_91: - if (musb->quirk_retries--) { + if (musb->quirk_retries) { musb_dbg(musb, "Poll devctl on invalid vbus, assume no session"); schedule_delayed_work(&musb->irq_work, msecs_to_jiffies(1000)); - + musb->quirk_retries--; return; } /* fall through */ case MUSB_QUIRK_A_DISCONNECT_19: - if (musb->quirk_retries--) { + if (musb->quirk_retries) { musb_dbg(musb, "Poll devctl on possible host mode disconnect"); schedule_delayed_work(&musb->irq_work, msecs_to_jiffies(1000)); - + musb->quirk_retries--; return; } if (!musb->session) -- cgit v1.2.3 From 0c3aae9bd59978fb8c3557d7883380bef0f2cfa1 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 9 Oct 2017 22:46:08 -0500 Subject: USB: musb: fix late external abort on suspend The musb delayed irq work was never flushed on suspend, something which since 4.9 can lead to an external abort if the work is scheduled after the grandparent's clock has been disabled: PM: Suspending system (mem) PM: suspend of devices complete after 125.224 msecs PM: suspend devices took 0.132 seconds PM: late suspend of devices complete after 7.423 msecs PM: noirq suspend of devices complete after 7.083 msecs suspend debug: Waiting for 5 second(s). Unhandled fault: external abort on non-linefetch (0x1008) at 0xd0262c60 ... [] (musb_default_readb) from [] (musb_irq_work+0x48/0x220) [] (musb_irq_work) from [] (process_one_work+0x1f4/0x758) [] (process_one_work) from [] (worker_thread+0x54/0x514) [] (worker_thread) from [] (kthread+0x128/0x158) [] (kthread) from [] (ret_from_fork+0x14/0x24) Commit 2bff3916fda9 ("usb: musb: Fix PM for hub disconnect") started scheduling musb_irq_work with a delay of up to a second and with retries thereby making this easy to trigger, for example, by suspending shortly after a disconnect. Note that we set a flag to prevent the irq work from rescheduling itself during suspend and instead process a disconnect immediately. This takes care of the case where we are disconnected shortly before suspending. However, when in host mode, a disconnect while suspended will still go unnoticed and thus prevent the controller from runtime suspending upon resume as the session bit is always set. This will need to be addressed separately. Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support") Fixes: 467d5c980709 ("usb: musb: Implement session bit based runtime PM for musb-core") Fixes: 2bff3916fda9 ("usb: musb: Fix PM for hub disconnect") Cc: stable # 4.9 Cc: Felipe Balbi Cc: Tony Lindgren Signed-off-by: Johan Hovold Tested-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 11 +++++++++-- drivers/usb/musb/musb_core.h | 2 ++ 2 files changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 07b8c7152e3d..1ced3af75b05 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1861,7 +1861,7 @@ static void musb_pm_runtime_check_session(struct musb *musb) MUSB_DEVCTL_HR; switch (devctl & ~s) { case MUSB_QUIRK_B_INVALID_VBUS_91: - if (musb->quirk_retries) { + if (musb->quirk_retries && !musb->flush_irq_work) { musb_dbg(musb, "Poll devctl on invalid vbus, assume no session"); schedule_delayed_work(&musb->irq_work, @@ -1871,7 +1871,7 @@ static void musb_pm_runtime_check_session(struct musb *musb) } /* fall through */ case MUSB_QUIRK_A_DISCONNECT_19: - if (musb->quirk_retries) { + if (musb->quirk_retries && !musb->flush_irq_work) { musb_dbg(musb, "Poll devctl on possible host mode disconnect"); schedule_delayed_work(&musb->irq_work, @@ -2681,8 +2681,15 @@ static int musb_suspend(struct device *dev) musb_platform_disable(musb); musb_disable_interrupts(musb); + + musb->flush_irq_work = true; + while (flush_delayed_work(&musb->irq_work)) + ; + musb->flush_irq_work = false; + if (!(musb->io.quirks & MUSB_PRESERVE_SESSION)) musb_writeb(musb->mregs, MUSB_DEVCTL, 0); + WARN_ON(!list_empty(&musb->pending_list)); spin_lock_irqsave(&musb->lock, flags); diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index c748f4ac1154..20f4614178d9 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -428,6 +428,8 @@ struct musb { unsigned test_mode:1; unsigned softconnect:1; + unsigned flush_irq_work:1; + u8 address; u8 test_mode_nr; u16 ackpend; /* ep0 */ -- cgit v1.2.3 From bfa53e0e366b98185fadb03f7916d1538cb90ebd Mon Sep 17 00:00:00 2001 From: Alexandre Bailon Date: Mon, 9 Oct 2017 22:46:09 -0500 Subject: usb: musb: musb_cppi41: Fix the address of teardown and autoreq registers The DA8xx and DSPS platforms don't use the same address for few registers. On Da8xx, this is causing some issues (e.g. teardown that doesn't work). Configure the address of the register during the init and use them instead of constants. Cc: stable@vger.kernel.org # v4.12+ Reported-by: nsekhar@ti.com Signed-off-by: Alexandre Bailon Tested-by: Sekhar Nori Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_cppi41.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c index ba255280a624..d66416a27146 100644 --- a/drivers/usb/musb/musb_cppi41.c +++ b/drivers/usb/musb/musb_cppi41.c @@ -26,6 +26,9 @@ #define MUSB_DMA_NUM_CHANNELS 15 +#define DA8XX_USB_AUTOREQ 0x14 +#define DA8XX_USB_TEARDOWN 0x1c + struct cppi41_dma_controller { struct dma_controller controller; struct cppi41_dma_channel rx_channel[MUSB_DMA_NUM_CHANNELS]; @@ -35,6 +38,9 @@ struct cppi41_dma_controller { u32 rx_mode; u32 tx_mode; u32 auto_req; + + u32 tdown_reg; + u32 autoreq_reg; }; static void save_rx_toggle(struct cppi41_dma_channel *cppi41_channel) @@ -364,8 +370,8 @@ static void cppi41_set_autoreq_mode(struct cppi41_dma_channel *cppi41_channel, if (new_mode == old_mode) return; controller->auto_req = new_mode; - musb_writel(controller->controller.musb->ctrl_base, USB_CTRL_AUTOREQ, - new_mode); + musb_writel(controller->controller.musb->ctrl_base, + controller->autoreq_reg, new_mode); } static bool cppi41_configure_channel(struct dma_channel *channel, @@ -581,12 +587,13 @@ static int cppi41_dma_channel_abort(struct dma_channel *channel) do { if (is_tx) - musb_writel(musb->ctrl_base, USB_TDOWN, tdbit); + musb_writel(musb->ctrl_base, controller->tdown_reg, + tdbit); ret = dmaengine_terminate_all(cppi41_channel->dc); } while (ret == -EAGAIN); if (is_tx) { - musb_writel(musb->ctrl_base, USB_TDOWN, tdbit); + musb_writel(musb->ctrl_base, controller->tdown_reg, tdbit); csr = musb_readw(epio, MUSB_TXCSR); if (csr & MUSB_TXCSR_TXPKTRDY) { @@ -727,6 +734,14 @@ cppi41_dma_controller_create(struct musb *musb, void __iomem *base) controller->controller.is_compatible = cppi41_is_compatible; controller->controller.musb = musb; + if (musb->io.quirks & MUSB_DA8XX) { + controller->tdown_reg = DA8XX_USB_TEARDOWN; + controller->autoreq_reg = DA8XX_USB_AUTOREQ; + } else { + controller->tdown_reg = USB_TDOWN; + controller->autoreq_reg = USB_CTRL_AUTOREQ; + } + ret = cppi41_dma_controller_start(controller); if (ret) goto plat_get_fail; -- cgit v1.2.3 From e10c5b0c773efb8643ee89d387d310584ca30830 Mon Sep 17 00:00:00 2001 From: Alexandre Bailon Date: Mon, 9 Oct 2017 22:46:10 -0500 Subject: usb: musb: musb_cppi41: Fix cppi41_set_dma_mode() for DA8xx The way to configure the DMA mode on DA8xx is different from DSPS. Add a new function to configure DMA mode on DA8xx and use a callback to call the right function based on the platform. Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Alexandre Bailon Tested-by: Sekhar Nori Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_cppi41.c | 40 +++++++++++++++++++++++++++++++++++++--- 1 file changed, 37 insertions(+), 3 deletions(-) diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c index d66416a27146..b2b1306c01cf 100644 --- a/drivers/usb/musb/musb_cppi41.c +++ b/drivers/usb/musb/musb_cppi41.c @@ -26,6 +26,7 @@ #define MUSB_DMA_NUM_CHANNELS 15 +#define DA8XX_USB_MODE 0x10 #define DA8XX_USB_AUTOREQ 0x14 #define DA8XX_USB_TEARDOWN 0x1c @@ -41,6 +42,9 @@ struct cppi41_dma_controller { u32 tdown_reg; u32 autoreq_reg; + + void (*set_dma_mode)(struct cppi41_dma_channel *cppi41_channel, + unsigned int mode); }; static void save_rx_toggle(struct cppi41_dma_channel *cppi41_channel) @@ -355,6 +359,32 @@ static void cppi41_set_dma_mode(struct cppi41_dma_channel *cppi41_channel, } } +static void da8xx_set_dma_mode(struct cppi41_dma_channel *cppi41_channel, + unsigned int mode) +{ + struct cppi41_dma_controller *controller = cppi41_channel->controller; + struct musb *musb = controller->controller.musb; + unsigned int shift; + u32 port; + u32 new_mode; + u32 old_mode; + + old_mode = controller->tx_mode; + port = cppi41_channel->port_num; + + shift = (port - 1) * 4; + if (!cppi41_channel->is_tx) + shift += 16; + new_mode = old_mode & ~(3 << shift); + new_mode |= mode << shift; + + if (new_mode == old_mode) + return; + controller->tx_mode = new_mode; + musb_writel(musb->ctrl_base, DA8XX_USB_MODE, new_mode); +} + + static void cppi41_set_autoreq_mode(struct cppi41_dma_channel *cppi41_channel, unsigned mode) { @@ -379,6 +409,7 @@ static bool cppi41_configure_channel(struct dma_channel *channel, dma_addr_t dma_addr, u32 len) { struct cppi41_dma_channel *cppi41_channel = channel->private_data; + struct cppi41_dma_controller *controller = cppi41_channel->controller; struct dma_chan *dc = cppi41_channel->dc; struct dma_async_tx_descriptor *dma_desc; enum dma_transfer_direction direction; @@ -404,7 +435,7 @@ static bool cppi41_configure_channel(struct dma_channel *channel, musb_writel(musb->ctrl_base, RNDIS_REG(cppi41_channel->port_num), len); /* gen rndis */ - cppi41_set_dma_mode(cppi41_channel, + controller->set_dma_mode(cppi41_channel, EP_MODE_DMA_GEN_RNDIS); /* auto req */ @@ -413,14 +444,15 @@ static bool cppi41_configure_channel(struct dma_channel *channel, } else { musb_writel(musb->ctrl_base, RNDIS_REG(cppi41_channel->port_num), 0); - cppi41_set_dma_mode(cppi41_channel, + controller->set_dma_mode(cppi41_channel, EP_MODE_DMA_TRANSPARENT); cppi41_set_autoreq_mode(cppi41_channel, EP_MODE_AUTOREQ_NONE); } } else { /* fallback mode */ - cppi41_set_dma_mode(cppi41_channel, EP_MODE_DMA_TRANSPARENT); + controller->set_dma_mode(cppi41_channel, + EP_MODE_DMA_TRANSPARENT); cppi41_set_autoreq_mode(cppi41_channel, EP_MODE_AUTOREQ_NONE); len = min_t(u32, packet_sz, len); } @@ -737,9 +769,11 @@ cppi41_dma_controller_create(struct musb *musb, void __iomem *base) if (musb->io.quirks & MUSB_DA8XX) { controller->tdown_reg = DA8XX_USB_TEARDOWN; controller->autoreq_reg = DA8XX_USB_AUTOREQ; + controller->set_dma_mode = da8xx_set_dma_mode; } else { controller->tdown_reg = USB_TDOWN; controller->autoreq_reg = USB_CTRL_AUTOREQ; + controller->set_dma_mode = cppi41_set_dma_mode; } ret = cppi41_dma_controller_start(controller); -- cgit v1.2.3 From 297d7fe9e439473800ab1f2f853b4b5f8c888500 Mon Sep 17 00:00:00 2001 From: Alexandre Bailon Date: Mon, 9 Oct 2017 22:46:11 -0500 Subject: usb: musb: musb_cppi41: Configure the number of channels for DA8xx Currently, the number of channels is set to 15 but in the case of DA8xx, the number of channels is 4. Update the driver to configure the number of channels at runtime. Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Alexandre Bailon Tested-by: Sekhar Nori Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_cppi41.c | 31 ++++++++++++++++++++++++++----- 1 file changed, 26 insertions(+), 5 deletions(-) diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c index b2b1306c01cf..1ec0a4947b6b 100644 --- a/drivers/usb/musb/musb_cppi41.c +++ b/drivers/usb/musb/musb_cppi41.c @@ -30,10 +30,12 @@ #define DA8XX_USB_AUTOREQ 0x14 #define DA8XX_USB_TEARDOWN 0x1c +#define DA8XX_DMA_NUM_CHANNELS 4 + struct cppi41_dma_controller { struct dma_controller controller; - struct cppi41_dma_channel rx_channel[MUSB_DMA_NUM_CHANNELS]; - struct cppi41_dma_channel tx_channel[MUSB_DMA_NUM_CHANNELS]; + struct cppi41_dma_channel *rx_channel; + struct cppi41_dma_channel *tx_channel; struct hrtimer early_tx; struct list_head early_tx_list; u32 rx_mode; @@ -45,6 +47,7 @@ struct cppi41_dma_controller { void (*set_dma_mode)(struct cppi41_dma_channel *cppi41_channel, unsigned int mode); + u8 num_channels; }; static void save_rx_toggle(struct cppi41_dma_channel *cppi41_channel) @@ -483,7 +486,7 @@ static struct dma_channel *cppi41_dma_channel_allocate(struct dma_controller *c, struct cppi41_dma_channel *cppi41_channel = NULL; u8 ch_num = hw_ep->epnum - 1; - if (ch_num >= MUSB_DMA_NUM_CHANNELS) + if (ch_num >= controller->num_channels) return NULL; if (is_tx) @@ -643,7 +646,7 @@ static void cppi41_release_all_dma_chans(struct cppi41_dma_controller *ctrl) struct dma_chan *dc; int i; - for (i = 0; i < MUSB_DMA_NUM_CHANNELS; i++) { + for (i = 0; i < ctrl->num_channels; i++) { dc = ctrl->tx_channel[i].dc; if (dc) dma_release_channel(dc); @@ -695,7 +698,7 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller) goto err; ret = -EINVAL; - if (port > MUSB_DMA_NUM_CHANNELS || !port) + if (port > controller->num_channels || !port) goto err; if (is_tx) cppi41_channel = &controller->tx_channel[port - 1]; @@ -736,6 +739,8 @@ void cppi41_dma_controller_destroy(struct dma_controller *c) hrtimer_cancel(&controller->early_tx); cppi41_dma_controller_stop(controller); + kfree(controller->rx_channel); + kfree(controller->tx_channel); kfree(controller); } EXPORT_SYMBOL_GPL(cppi41_dma_controller_destroy); @@ -744,6 +749,7 @@ struct dma_controller * cppi41_dma_controller_create(struct musb *musb, void __iomem *base) { struct cppi41_dma_controller *controller; + int channel_size; int ret = 0; if (!musb->controller->parent->of_node) { @@ -770,18 +776,33 @@ cppi41_dma_controller_create(struct musb *musb, void __iomem *base) controller->tdown_reg = DA8XX_USB_TEARDOWN; controller->autoreq_reg = DA8XX_USB_AUTOREQ; controller->set_dma_mode = da8xx_set_dma_mode; + controller->num_channels = DA8XX_DMA_NUM_CHANNELS; } else { controller->tdown_reg = USB_TDOWN; controller->autoreq_reg = USB_CTRL_AUTOREQ; controller->set_dma_mode = cppi41_set_dma_mode; + controller->num_channels = MUSB_DMA_NUM_CHANNELS; } + channel_size = controller->num_channels * + sizeof(struct cppi41_dma_channel); + controller->rx_channel = kzalloc(channel_size, GFP_KERNEL); + if (!controller->rx_channel) + goto rx_channel_alloc_fail; + controller->tx_channel = kzalloc(channel_size, GFP_KERNEL); + if (!controller->tx_channel) + goto tx_channel_alloc_fail; + ret = cppi41_dma_controller_start(controller); if (ret) goto plat_get_fail; return &controller->controller; plat_get_fail: + kfree(controller->tx_channel); +tx_channel_alloc_fail: + kfree(controller->rx_channel); +rx_channel_alloc_fail: kfree(controller); kzalloc_fail: if (ret == -EPROBE_DEFER) -- cgit v1.2.3 From 445ef61543da3db5b699f87fb0aa4f227165f6ed Mon Sep 17 00:00:00 2001 From: Jonathan Liu Date: Mon, 9 Oct 2017 22:46:12 -0500 Subject: usb: musb: Check for host-mode using is_host_active() on reset interrupt The sunxi musb has a bug where sometimes it will generate a babble error on device disconnect instead of a disconnect IRQ. When this happens the musb controller switches from host mode to device mode (it clears MUSB_DEVCTL_HM/MUSB_DEVCTL_SESSION and sets MUSB_DEVCTL_BDEVICE) and gets stuck in this state. The babble error is misdetected as a bus reset because MUSB_DEVCTL_HM was cleared. To fix this, use is_host_active() rather than (devctl & MUSB_DEVCTL_HM) to detect babble error so that sunxi musb babble recovery can handle it by restoring the mode. This information is provided by the driver logic and does not rely on register contents. Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: Jonathan Liu Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 1ced3af75b05..ff5a1a8989d5 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -906,7 +906,7 @@ b_host: */ if (int_usb & MUSB_INTR_RESET) { handled = IRQ_HANDLED; - if (devctl & MUSB_DEVCTL_HM) { + if (is_host_active(musb)) { /* * When BABBLE happens what we can depends on which * platform MUSB is running, because some platforms @@ -916,9 +916,7 @@ b_host: * drop the session. */ dev_err(musb->controller, "Babble\n"); - - if (is_host_active(musb)) - musb_recover_from_babble(musb); + musb_recover_from_babble(musb); } else { musb_dbg(musb, "BUS RESET as %s", usb_otg_state_string(musb->xceiv->otg->state)); -- cgit v1.2.3 From 6ed05c68cbcae42cd52b8e53b66952bfa9c002ce Mon Sep 17 00:00:00 2001 From: Jonathan Liu Date: Mon, 9 Oct 2017 22:46:13 -0500 Subject: usb: musb: sunxi: Explicitly release USB PHY on exit This fixes a kernel oops when unloading the driver due to usb_put_phy being called after usb_phy_generic_unregister when the device is detached. Calling usb_phy_generic_unregister causes x->dev->driver to be NULL in usb_put_phy and results in a NULL pointer dereference. Cc: stable@vger.kernel.org # v4.3+ Signed-off-by: Jonathan Liu Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/sunxi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c index c9a09b5bb6e5..dc353e24d53c 100644 --- a/drivers/usb/musb/sunxi.c +++ b/drivers/usb/musb/sunxi.c @@ -297,6 +297,8 @@ static int sunxi_musb_exit(struct musb *musb) if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags)) sunxi_sram_release(musb->controller->parent); + devm_usb_put_phy(glue->dev, glue->xceiv); + return 0; } -- cgit v1.2.3 From 2811501e6d8f5747d08f8e25b9ecf472d0dc4c7d Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 3 Oct 2017 11:16:43 +0300 Subject: usb: quirks: add quirk for WORLDE MINI MIDI keyboard MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This keyboard doesn't implement Get String descriptors properly even though string indexes are valid. What happens is that when requesting for the String descriptor, the device disconnects and reconnects. Without this quirk, this loop will continue forever. Cc: Alan Stern Reported-by: Владимир Мартьянов Cc: stable Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 82806e311202..a6aaf2f193a4 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -221,6 +221,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* Corsair Strafe RGB */ { USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT }, + /* MIDI keyboard WORLDE MINI */ + { USB_DEVICE(0x1c75, 0x0204), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Acer C120 LED Projector */ { USB_DEVICE(0x1de1, 0xc102), .driver_info = USB_QUIRK_NO_LPM }, -- cgit v1.2.3 From 671632a019853744bc6c0b2ed8bcfdbcea371848 Mon Sep 17 00:00:00 2001 From: Bin Liu Date: Tue, 17 Oct 2017 08:22:25 -0500 Subject: MAINTAINERS: fix git tree url for musb module Commit 3b2435192fe91 ("MAINTAINERS: drop OMAP USB and MUSB maintainership") switched the maintainer for musb module, but didn't update the git tree location. Delete the git tree information, since the current maintainer doesn't have a public tree. Reported-by: Jonathan Liu Signed-off-by: Bin Liu Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index a74227ad082e..1f33ae356003 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9213,7 +9213,6 @@ F: include/linux/isicom.h MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER M: Bin Liu L: linux-usb@vger.kernel.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git S: Maintained F: drivers/usb/musb/ -- cgit v1.2.3 From 1c0edc3633b56000e18d82fc241e3995ca18a69e Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 18 Oct 2017 12:49:38 -0400 Subject: USB: core: fix out-of-bounds access bug in usb_get_bos_descriptor() Andrey used the syzkaller fuzzer to find an out-of-bounds memory access in usb_get_bos_descriptor(). The code wasn't checking that the next usb_dev_cap_header structure could fit into the remaining buffer space. This patch fixes the error and also reduces the bNumDeviceCaps field in the header to match the actual number of capabilities found, in cases where there are fewer than expected. Reported-by: Andrey Konovalov Signed-off-by: Alan Stern Tested-by: Andrey Konovalov CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/config.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 68b54bd88d1e..883549ee946c 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -960,10 +960,12 @@ int usb_get_bos_descriptor(struct usb_device *dev) for (i = 0; i < num; i++) { buffer += length; cap = (struct usb_dev_cap_header *)buffer; - length = cap->bLength; - if (total_len < length) + if (total_len < sizeof(*cap) || total_len < cap->bLength) { + dev->bos->desc->bNumDeviceCaps = i; break; + } + length = cap->bLength; total_len -= length; if (cap->bDescriptorType != USB_DT_DEVICE_CAPABILITY) { -- cgit v1.2.3 From 1ac7db63333db1eeff901bfd6bbcd502b4634fa4 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Tue, 17 Oct 2017 16:07:33 +0300 Subject: usb: hub: Allow reset retry for USB2 devices on connect bounce If the connect status change is set during reset signaling, but the status remains connected just retry port reset. This solves an issue with connecting a 90W HP Thunderbolt 3 dock with a Lenovo Carbon x1 (5th generation) which causes a 30min loop of a high speed device being re-discovererd before usb ports starts working. [...] [ 389.023845] usb 3-1: new high-speed USB device number 55 using xhci_hcd [ 389.491841] usb 3-1: new high-speed USB device number 56 using xhci_hcd [ 389.959928] usb 3-1: new high-speed USB device number 57 using xhci_hcd [...] This is caused by a high speed device that doesn't successfully go to the enabled state after the second port reset. Instead the connection bounces (connected, with connect status change), bailing out completely from enumeration just to restart from scratch. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1716332 Cc: Stable Signed-off-by: Mathias Nyman Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index b5c733613823..e9ce6bb0b22d 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2710,13 +2710,16 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1, if (!(portstatus & USB_PORT_STAT_CONNECTION)) return -ENOTCONN; - /* bomb out completely if the connection bounced. A USB 3.0 - * connection may bounce if multiple warm resets were issued, + /* Retry if connect change is set but status is still connected. + * A USB 3.0 connection may bounce if multiple warm resets were issued, * but the device may have successfully re-connected. Ignore it. */ if (!hub_is_superspeed(hub->hdev) && - (portchange & USB_PORT_STAT_C_CONNECTION)) - return -ENOTCONN; + (portchange & USB_PORT_STAT_C_CONNECTION)) { + usb_clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_CONNECTION); + return -EAGAIN; + } if (!(portstatus & USB_PORT_STAT_ENABLE)) return -EBUSY; -- cgit v1.2.3