From 9a4f92a603cd72ee534cead20cbc627b34cfc884 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Mon, 20 Apr 2009 04:24:28 +0000 Subject: mlx4_en: Fix error handling while activating RX rings In case of failure of either srq creation or page allocation, the cleanup code handled the failed ring as well, and tried to destroy resources that where not allocated. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/mlx4/en_rx.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c index 7e40741fb7d8..8673008f72df 100644 --- a/drivers/net/mlx4/en_rx.c +++ b/drivers/net/mlx4/en_rx.c @@ -436,8 +436,9 @@ int mlx4_en_activate_rx_rings(struct mlx4_en_priv *priv) /* Initialize page allocators */ err = mlx4_en_init_allocator(priv, ring); if (err) { - mlx4_err(mdev, "Failed initializing ring allocator\n"); - goto err_allocator; + mlx4_err(mdev, "Failed initializing ring allocator\n"); + ring_ind--; + goto err_allocator; } /* Fill Rx buffers */ @@ -467,6 +468,7 @@ int mlx4_en_activate_rx_rings(struct mlx4_en_priv *priv) ring->wqres.db.dma, &ring->srq); if (err){ mlx4_err(mdev, "Failed to allocate srq\n"); + ring_ind--; goto err_srq; } ring->srq.event = mlx4_en_srq_event; -- cgit v1.2.3 From 1e338db56e5a6a5bb93884c1fb3b0b9f01958f93 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Mon, 20 Apr 2009 04:26:05 +0000 Subject: mlx4_en: Fix a race at restart task The query whether the port is up or not should be done at the execution of the restart task and not when it is queued. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/mlx4/en_netdev.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c index 303c23de6cac..09fb7cf9f48c 100644 --- a/drivers/net/mlx4/en_netdev.c +++ b/drivers/net/mlx4/en_netdev.c @@ -348,11 +348,9 @@ static void mlx4_en_tx_timeout(struct net_device *dev) if (netif_msg_timer(priv)) mlx4_warn(mdev, "Tx timeout called on port:%d\n", priv->port); - if (netif_carrier_ok(dev)) { - priv->port_stats.tx_timeout++; - mlx4_dbg(DRV, priv, "Scheduling watchdog\n"); - queue_work(mdev->workqueue, &priv->watchdog_task); - } + priv->port_stats.tx_timeout++; + mlx4_dbg(DRV, priv, "Scheduling watchdog\n"); + queue_work(mdev->workqueue, &priv->watchdog_task); } @@ -761,9 +759,14 @@ static void mlx4_en_restart(struct work_struct *work) struct net_device *dev = priv->dev; mlx4_dbg(DRV, priv, "Watchdog task called for port %d\n", priv->port); - mlx4_en_stop_port(dev); - if (mlx4_en_start_port(dev)) - mlx4_err(mdev, "Failed restarting port %d\n", priv->port); + + mutex_lock(&mdev->state_lock); + if (priv->port_up) { + mlx4_en_stop_port(dev); + if (mlx4_en_start_port(dev)) + mlx4_err(mdev, "Failed restarting port %d\n", priv->port); + } + mutex_unlock(&mdev->state_lock); } -- cgit v1.2.3 From 966508f7a591399a0b0dcfc0336e88480e5ed520 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Mon, 20 Apr 2009 04:30:03 +0000 Subject: mlx4_en: Assign dummy event handler for TX queue The low level driver always assumes this handler exists. The lack of it could cause kernel panic Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/mlx4/en_resources.c | 6 ++++++ drivers/net/mlx4/en_rx.c | 6 ------ drivers/net/mlx4/en_tx.c | 1 + drivers/net/mlx4/mlx4_en.h | 1 + 4 files changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/net/mlx4/en_resources.c b/drivers/net/mlx4/en_resources.c index a0545209e507..65ca706c04bb 100644 --- a/drivers/net/mlx4/en_resources.c +++ b/drivers/net/mlx4/en_resources.c @@ -94,3 +94,9 @@ void mlx4_en_unmap_buffer(struct mlx4_buf *buf) vunmap(buf->direct.buf); } + +void mlx4_en_sqp_event(struct mlx4_qp *qp, enum mlx4_event event) +{ + return; +} + diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c index 8673008f72df..0cbb78ca7b29 100644 --- a/drivers/net/mlx4/en_rx.c +++ b/drivers/net/mlx4/en_rx.c @@ -928,12 +928,6 @@ void mlx4_en_set_default_rss_map(struct mlx4_en_priv *priv, } } -static void mlx4_en_sqp_event(struct mlx4_qp *qp, enum mlx4_event event) -{ - return; -} - - static int mlx4_en_config_rss_qp(struct mlx4_en_priv *priv, int qpn, int srqn, int cqn, enum mlx4_qp_state *state, diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c index 4afd5993e31c..ac6fc499b280 100644 --- a/drivers/net/mlx4/en_tx.c +++ b/drivers/net/mlx4/en_tx.c @@ -112,6 +112,7 @@ int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv, mlx4_err(mdev, "Failed allocating qp %d\n", ring->qpn); goto err_reserve; } + ring->qp.event = mlx4_en_sqp_event; return 0; diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h index e9af32d41ca4..ef840abbcd39 100644 --- a/drivers/net/mlx4/mlx4_en.h +++ b/drivers/net/mlx4/mlx4_en.h @@ -538,6 +538,7 @@ int mlx4_en_poll_rx_cq(struct napi_struct *napi, int budget); void mlx4_en_fill_qp_context(struct mlx4_en_priv *priv, int size, int stride, int is_tx, int rss, int qpn, int cqn, int srqn, struct mlx4_qp_context *context); +void mlx4_en_sqp_event(struct mlx4_qp *qp, enum mlx4_event event); int mlx4_en_map_buffer(struct mlx4_buf *buf); void mlx4_en_unmap_buffer(struct mlx4_buf *buf); -- cgit v1.2.3 From 45b4d66d690600dac1aa805b75763331483acf22 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Mon, 20 Apr 2009 04:33:15 +0000 Subject: mlx4_en: use NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM for tx csum at initialization The former usage was to set the NETIF_F_HW_CSUM flag which is not used in get_tx_csum. It caused Ethtool to show tx checksum as "on" even though it was turned off in previous operation. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/mlx4/en_netdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c index 09fb7cf9f48c..438678ab2a10 100644 --- a/drivers/net/mlx4/en_netdev.c +++ b/drivers/net/mlx4/en_netdev.c @@ -1057,7 +1057,7 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, * Set driver features */ dev->features |= NETIF_F_SG; - dev->features |= NETIF_F_HW_CSUM; + dev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; dev->features |= NETIF_F_HIGHDMA; dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | -- cgit v1.2.3 From b1b243afac302d181d19c8024c355d9677beab49 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Mon, 20 Apr 2009 04:34:38 +0000 Subject: mlx4_en: Move to SW counters for total bytes and packets The per ring counters are implemented in SW. Now moving to have the total counters as the sum of all rings. This way the numbers will always be consistent and we no longer depend on HW buffer size limitations for those counters that can be insufficient in some cases. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/mlx4/en_port.c | 45 +++++++++++++-------------------------------- 1 file changed, 13 insertions(+), 32 deletions(-) diff --git a/drivers/net/mlx4/en_port.c b/drivers/net/mlx4/en_port.c index c5a4c0389752..a29abe845d2e 100644 --- a/drivers/net/mlx4/en_port.c +++ b/drivers/net/mlx4/en_port.c @@ -151,6 +151,7 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) struct mlx4_cmd_mailbox *mailbox; u64 in_mod = reset << 8 | port; int err; + int i; mailbox = mlx4_alloc_cmd_mailbox(mdev->dev); if (IS_ERR(mailbox)) @@ -165,38 +166,18 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) spin_lock_bh(&priv->stats_lock); - stats->rx_packets = be32_to_cpu(mlx4_en_stats->RTOTFRMS) - - be32_to_cpu(mlx4_en_stats->RDROP); - stats->tx_packets = be64_to_cpu(mlx4_en_stats->TTOT_prio_0) + - be64_to_cpu(mlx4_en_stats->TTOT_prio_1) + - be64_to_cpu(mlx4_en_stats->TTOT_prio_2) + - be64_to_cpu(mlx4_en_stats->TTOT_prio_3) + - be64_to_cpu(mlx4_en_stats->TTOT_prio_4) + - be64_to_cpu(mlx4_en_stats->TTOT_prio_5) + - be64_to_cpu(mlx4_en_stats->TTOT_prio_6) + - be64_to_cpu(mlx4_en_stats->TTOT_prio_7) + - be64_to_cpu(mlx4_en_stats->TTOT_novlan) + - be64_to_cpu(mlx4_en_stats->TTOT_loopbk); - stats->rx_bytes = be64_to_cpu(mlx4_en_stats->ROCT_prio_0) + - be64_to_cpu(mlx4_en_stats->ROCT_prio_1) + - be64_to_cpu(mlx4_en_stats->ROCT_prio_2) + - be64_to_cpu(mlx4_en_stats->ROCT_prio_3) + - be64_to_cpu(mlx4_en_stats->ROCT_prio_4) + - be64_to_cpu(mlx4_en_stats->ROCT_prio_5) + - be64_to_cpu(mlx4_en_stats->ROCT_prio_6) + - be64_to_cpu(mlx4_en_stats->ROCT_prio_7) + - be64_to_cpu(mlx4_en_stats->ROCT_novlan); - - stats->tx_bytes = be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_0) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_1) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_2) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_3) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_4) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_5) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_6) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_7) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_novlan) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_loopbk); + stats->rx_packets = 0; + stats->rx_bytes = 0; + for (i = 0; i < priv->rx_ring_num; i++) { + stats->rx_packets += priv->rx_ring[i].packets; + stats->rx_bytes += priv->rx_ring[i].bytes; + } + stats->tx_packets = 0; + stats->tx_bytes = 0; + for (i = 0; i <= priv->tx_ring_num; i++) { + stats->tx_packets += priv->tx_ring[i].packets; + stats->tx_bytes += priv->tx_ring[i].bytes; + } stats->rx_errors = be64_to_cpu(mlx4_en_stats->PCS) + be32_to_cpu(mlx4_en_stats->RdropLength) + -- cgit v1.2.3 From 1a44cc3778f63dca5795708da2a2a7696da7fd61 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 20 Apr 2009 18:32:08 +0000 Subject: mlx4_en: Fix cleanup if workqueue create in mlx4_en_add() fails If creating a workqueue fails, don't jump to the error path where that same workqueue is destroyed, since destroy_workqueue() can't handle a NULL pointer. This was spotted by the Coverity checker (CID 2617). Signed-off-by: Roland Dreier Signed-off-by: David S. Miller --- drivers/net/mlx4/en_main.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/mlx4/en_main.c b/drivers/net/mlx4/en_main.c index eda72dd2120f..510633fd57f6 100644 --- a/drivers/net/mlx4/en_main.c +++ b/drivers/net/mlx4/en_main.c @@ -181,7 +181,7 @@ static void *mlx4_en_add(struct mlx4_dev *dev) mdev->workqueue = create_singlethread_workqueue("mlx4_en"); if (!mdev->workqueue) { err = -ENOMEM; - goto err_close_nic; + goto err_mr; } /* At this stage all non-port specific tasks are complete: @@ -214,9 +214,8 @@ err_free_netdev: flush_workqueue(mdev->workqueue); /* Stop event queue before we drop down to release shared SW state */ - -err_close_nic: destroy_workqueue(mdev->workqueue); + err_mr: mlx4_mr_free(dev, &mdev->mr); err_uar: -- cgit v1.2.3 From 99b28c47091db2bb7f594a5088831d341a800a33 Mon Sep 17 00:00:00 2001 From: Ken Kawasaki Date: Sat, 18 Apr 2009 13:44:44 +0000 Subject: pcnet_cs: add cis(firmware) of the Allied Telesis LA-PCM pcnet_cs: add cis(firmware) of the Allied Telesis LA-PCM Signed-off-by: Ken Kawasaki Signed-off-by: David S. Miller --- drivers/net/pcmcia/pcnet_cs.c | 2 +- firmware/Makefile | 1 + firmware/WHENCE | 10 ++++++++++ firmware/cis/LA-PCM.cis.ihex | 20 ++++++++++++++++++++ 4 files changed, 32 insertions(+), 1 deletion(-) create mode 100644 firmware/cis/LA-PCM.cis.ihex diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 2fbf9f9ddd37..652a36888361 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1758,7 +1758,7 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"), PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"), PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "DP83903.cis"), - PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "LA-PCM.cis"), + PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "cis/LA-PCM.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "PE520.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "NE2K.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "PE-200.cis"), diff --git a/firmware/Makefile b/firmware/Makefile index 142c17ab9e57..25200d106ee8 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -46,6 +46,7 @@ fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \ e100/d102e_ucode.bin fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin +fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \ advansys/3550.bin advansys/38C0800.bin diff --git a/firmware/WHENCE b/firmware/WHENCE index 10f61c9e5a8a..4c52984a8319 100644 --- a/firmware/WHENCE +++ b/firmware/WHENCE @@ -576,6 +576,16 @@ Found in hex form in kernel source. -------------------------------------------------------------------------- +Driver: PCMCIA_PCNET - NE2000 compatible PCMCIA adapter + +File: cis/LA-PCM.cis + +Licence: GPL + +Originally developed by the pcmcia-cs project + +-------------------------------------------------------------------------- + Driver: PCMCIA_SMC91C92 - SMC 91Cxx PCMCIA File: ositech/Xilinx7OD.bin diff --git a/firmware/cis/LA-PCM.cis.ihex b/firmware/cis/LA-PCM.cis.ihex new file mode 100644 index 000000000000..a0ff0c7b393d --- /dev/null +++ b/firmware/cis/LA-PCM.cis.ihex @@ -0,0 +1,20 @@ +:100000000105D4F953E9FF17035338FF20040FC04B +:1000100002002102060315390401416C6C69656414 +:100020002054656C657369732C4B2E4B00457468C6 +:1000300065726E6574204C414E20436172640043CA +:10004000656E747265434F4D004C412D50434D0019 +:10005000FF1A0602100000020B1B08810108E06075 +:1000600000021F1B08820108E06020021F1B08839A +:100070000108E06040021F1B08840108E060600284 +:100080001F1B08850108E06080021F1B088601080D +:10009000E060A0021F1B08870108E060C0021F1B70 +:1000A00008880108E060E0021F1B08890108E06081 +:1000B00000031F1B088A0108E06020031F1B088B38 +:1000C0000108E06040031F1B088C0108E06060032A +:1000D0001F1B088D0108E06080031F1B088E0108AC +:1000E000E060A0031F1B088F0108E060C0031F1B16 +:0D00F00008900108E060E0031F1400FF000D +:00000001FF +# +# Replacement CIS for Allied Telesis LA-PCM +# -- cgit v1.2.3 From 1bb593801ee32dd9d983dea3cbedf68f71345f78 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 21 Apr 2009 02:08:51 -0700 Subject: atmel: fix netdev ops conversion sparse says: drivers/net/wireless/atmel.c:1501:3: warning: Initializer entry defined twice drivers/net/wireless/atmel.c:1505:3: also defined here and it's correct; atmel has its own ndo_change_mtu and shouldn't use eth_change_mtu. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- drivers/net/wireless/atmel.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index 857d84148b1d..27eef8fb7107 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -1502,7 +1502,6 @@ static const struct net_device_ops atmel_netdev_ops = { .ndo_set_mac_address = atmel_set_mac_address, .ndo_start_xmit = start_tx, .ndo_do_ioctl = atmel_ioctl, - .ndo_change_mtu = eth_change_mtu, .ndo_validate_addr = eth_validate_addr, }; -- cgit v1.2.3 From 4b6f764e148a194f792e75d43dc3504bc0d81064 Mon Sep 17 00:00:00 2001 From: Jay Sternberg Date: Mon, 20 Apr 2009 14:36:54 -0700 Subject: iwlwifi: fix EEPROM validation mask to include OTP only devices Fix the bug where some revisions of 6000 series hardware cannot be used. Later versions of 6000 series have the EEPROM replaced by OTP. For these devices to be used we need to expand valid EEPROM mask. Signed-off-by: Jay Sternberg Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-csr.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h index 2f1242447b3b..6e983149b83b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-csr.h +++ b/drivers/net/wireless/iwlwifi/iwl-csr.h @@ -223,7 +223,7 @@ #define CSR_EEPROM_REG_MSK_DATA (0xFFFF0000) /* EEPROM GP */ -#define CSR_EEPROM_GP_VALID_MSK (0x00000006) +#define CSR_EEPROM_GP_VALID_MSK (0x00000007) #define CSR_EEPROM_GP_BAD_SIGNATURE (0x00000000) #define CSR_EEPROM_GP_IF_OWNER_MSK (0x00000180) -- cgit v1.2.3 From 71d449b55abf5018d7c711b2b62abc0c083723c4 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Mon, 20 Apr 2009 14:37:01 -0700 Subject: iwl3945: use cancel_delayed_work_sync to cancel rfkill_poll Users reported lockup with work still trying to run after module has been unloaded. http://thread.gmane.org/gmane.linux.kernel.wireless.general/30594/focus=30601 Signed-off-by: Reinette Chatre Reported-by: TJ Reported-by: Huaxu Wan Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index da61ecd62882..1299479f99dc 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -5196,7 +5196,7 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev) sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group); iwl_rfkill_unregister(priv); - cancel_delayed_work(&priv->rfkill_poll); + cancel_delayed_work_sync(&priv->rfkill_poll); iwl3945_dealloc_ucode_pci(priv); -- cgit v1.2.3 From 7d42081a271bd8a82f2100524085c4f029e47717 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Mon, 20 Apr 2009 15:36:19 -0700 Subject: mac80211: do not print WARN if config interface It is expected that config interface will always succeed as mac80211 will only request what driver supports. The exception here is when a device has rfkill enabled. At this time the rfkill state is unknown to mac80211 and config interface can fail. When this happens we deal with this error instead of printing a WARN. Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- net/mac80211/pm.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index 027302326498..81985d27cbda 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -156,8 +156,19 @@ int __ieee80211_resume(struct ieee80211_hw *hw) case NL80211_IFTYPE_ADHOC: case NL80211_IFTYPE_AP: case NL80211_IFTYPE_MESH_POINT: - WARN_ON(ieee80211_if_config(sdata, changed)); - ieee80211_bss_info_change_notify(sdata, ~0); + /* + * Driver's config_interface can fail if rfkill is + * enabled. Accommodate this return code. + * FIXME: When mac80211 has knowledge of rfkill + * state the code below can change back to: + * WARN(ieee80211_if_config(sdata, changed)); + * ieee80211_bss_info_change_notify(sdata, ~0); + */ + if (ieee80211_if_config(sdata, changed)) + printk(KERN_DEBUG "%s: failed to configure interface during resume\n", + sdata->dev->name); + else + ieee80211_bss_info_change_notify(sdata, ~0); break; case NL80211_IFTYPE_WDS: break; -- cgit v1.2.3 From d1bcb9f1273adee6d2ce5edf84f19409a5cc31b9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 21 Apr 2009 01:36:59 +0200 Subject: mac80211: fix alignment calculation bug When checking whether or not a given frame needs to be moved to be properly aligned to a 4-byte boundary, we use & 4 which wasn't intended, this code should check the lowest two bits. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/rx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 5fa7aedd90ed..9776f73c51ad 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1397,7 +1397,7 @@ ieee80211_deliver_skb(struct ieee80211_rx_data *rx) * mac80211. That also explains the __skb_push() * below. */ - align = (unsigned long)skb->data & 4; + align = (unsigned long)skb->data & 3; if (align) { if (WARN_ON(skb_headroom(skb) < 3)) { dev_kfree_skb(skb); -- cgit v1.2.3 From c491bf1205485c83086bf4f2f26ca6598d48133a Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Tue, 21 Apr 2009 16:22:01 +0300 Subject: mwl8: fix build warning. This patch fixes a build warning in mwl8.c. (Marvell TOPDOG wireless driver) The warning it fixes is: "large integer implicitly truncated to unsigned type." The rx_ctrl member of the mwl8k_rx_desc struct is 8 bit (__u8 ), whereas trying to assign it a 32 bit value (which is returned from cpu_to_le32()) causes the compiler to issue a truncation warning. Signed-off-by: Rami Rosen Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index b5dbf6d9e517..a9a970469c2a 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -893,8 +893,7 @@ static int mwl8k_rxq_init(struct ieee80211_hw *hw, int index) rx_desc->next_rx_desc_phys_addr = cpu_to_le32(rxq->rx_desc_dma + nexti * sizeof(*rx_desc)); - rx_desc->rx_ctrl = - cpu_to_le32(MWL8K_RX_CTRL_OWNED_BY_HOST); + rx_desc->rx_ctrl = MWL8K_RX_CTRL_OWNED_BY_HOST; } return 0; -- cgit v1.2.3 From d2ee9cd2e2bdfa2e5817142d6f044697066d3977 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Tue, 21 Apr 2009 10:55:47 -0700 Subject: iwlwifi: add debugging for TX path When debugging TX issues it is helpful to know the seq nr of the frame being transmitted. The seq nr is printed as part of ucode's log informing us which frame is being processed. Having this information printed in driver log makes it easy to match activities between driver and firmware. Also make possible to print TX flags directly. These are already printed as part of entire TX command, but having it printed directly in cpu format makes it easier to look at. Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-tx.c | 4 +++- drivers/net/wireless/iwlwifi/iwl3945-base.c | 4 +++- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 1f117a49c569..8ef53e28176f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -875,8 +875,10 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) txq->need_update = 0; } + IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n", + le16_to_cpu(out_cmd->hdr.sequence)); + IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx_cmd->tx_flags)); iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd, sizeof(*tx_cmd)); - iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len); /* Set up entry for this TFD in Tx byte-count array */ diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 1299479f99dc..acefc3721267 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -1146,8 +1146,10 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) txq->need_update = 0; } + IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n", + le16_to_cpu(out_cmd->hdr.sequence)); + IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx->tx_flags)); iwl_print_hex_dump(priv, IWL_DL_TX, tx, sizeof(*tx)); - iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx->hdr, ieee80211_hdrlen(fc)); -- cgit v1.2.3 From df833b1d73680f9f9dc72cbc3215edbbc6ab740d Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Tue, 21 Apr 2009 10:55:48 -0700 Subject: iwlwifi: DMA fixes A few issues wrt DMA were uncovered when using the driver with swiotlb. - driver should not use memory after it has been mapped - iwl3945's RX queue management cannot use all of iwlagn because the size of the RX buffer is different. Revert back to using iwl3945 specific routines that map/unmap memory. - no need to "dma_syn_single_range_for_cpu" followed by pci_unmap_single, we can just call pci_unmap_single initially - only map the memory area that will be used by device. this is especially relevant to the mapping of iwl_cmd. we should not map the entire structure because the meta data at the beginning of structure contains the address to be used later for unmapping. If the address to be used for unmapping is stored in mapped data it creates a problem. - ensure that _if_ memory needs to be modified after it is mapped that we call _sync_single_for_cpu first, and then release it back to device with _sync_single_for_device - we mapped the wrong length of data for host commands, with mapped length differing with length provided to device, fix that. Thanks to Jason Andryuk for significant bisecting help to find these issues. This fixes http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1964 Signed-off-by: Reinette Chatre Tested-by: Jason Andryuk Tested-by: Ben Gamari Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-3945.c | 2 +- drivers/net/wireless/iwlwifi/iwl-3945.h | 1 + drivers/net/wireless/iwlwifi/iwl-agn.c | 11 +-- drivers/net/wireless/iwlwifi/iwl-dev.h | 4 + drivers/net/wireless/iwlwifi/iwl-tx.c | 95 ++++++++++-------- drivers/net/wireless/iwlwifi/iwl3945-base.c | 148 +++++++++++++++++++--------- 6 files changed, 165 insertions(+), 96 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index 2399328e8de7..527525cc0919 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -1192,7 +1192,7 @@ int iwl3945_hw_nic_init(struct iwl_priv *priv) return -ENOMEM; } } else - iwl_rx_queue_reset(priv, rxq); + iwl3945_rx_queue_reset(priv, rxq); iwl3945_rx_replenish(priv); diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h index ab7aaf6872c7..55188844657b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945.h @@ -215,6 +215,7 @@ extern int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm); extern int iwl3945_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq, int count, u32 id); extern void iwl3945_rx_replenish(void *data); +extern void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq); extern void iwl3945_tx_queue_free(struct iwl_priv *priv, struct iwl_tx_queue *txq); extern int iwl3945_send_cmd_pdu(struct iwl_priv *priv, u8 id, u16 len, const void *data); diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 3889158b359c..1ef4192207a5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -976,11 +976,9 @@ void iwl_rx_handle(struct iwl_priv *priv) rxq->queue[i] = NULL; - dma_sync_single_range_for_cpu( - &priv->pci_dev->dev, rxb->real_dma_addr, - rxb->aligned_dma_addr - rxb->real_dma_addr, - priv->hw_params.rx_buf_size, - PCI_DMA_FROMDEVICE); + pci_unmap_single(priv->pci_dev, rxb->real_dma_addr, + priv->hw_params.rx_buf_size + 256, + PCI_DMA_FROMDEVICE); pkt = (struct iwl_rx_packet *)rxb->skb->data; /* Reclaim a command buffer only if this packet is a response @@ -1031,9 +1029,6 @@ void iwl_rx_handle(struct iwl_priv *priv) rxb->skb = NULL; } - pci_unmap_single(priv->pci_dev, rxb->real_dma_addr, - priv->hw_params.rx_buf_size + 256, - PCI_DMA_FROMDEVICE); spin_lock_irqsave(&rxq->lock, flags); list_add_tail(&rxb->list, &priv->rxq.rx_used); spin_unlock_irqrestore(&rxq->lock, flags); diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index ec9a13846edd..cf7f0db58fcf 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -360,12 +360,16 @@ struct iwl_host_cmd { /** * struct iwl_rx_queue - Rx queue + * @bd: driver's pointer to buffer of receive buffer descriptors (rbd) + * @dma_addr: bus address of buffer of receive buffer descriptors (rbd) * @read: Shared index to newest available Rx buffer * @write: Shared index to oldest written Rx packet * @free_count: Number of pre-allocated buffers in rx_free * @rx_free: list of free SKBs for use * @rx_used: List of Rx buffers with no SKB * @need_update: flag to indicate we need to update read/write index + * @rb_stts: driver's pointer to receive buffer status + * @rb_stts_dma: bus address of receive buffer status * * NOTE: rx_free and rx_used are used as a FIFO for iwl_rx_mem_buffers */ diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 8ef53e28176f..71d5b8a1a73e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -799,6 +799,22 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) /* Copy MAC header from skb into command buffer */ memcpy(tx_cmd->hdr, hdr, hdr_len); + + /* Total # bytes to be transmitted */ + len = (u16)skb->len; + tx_cmd->len = cpu_to_le16(len); + + if (info->control.hw_key) + iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id); + + /* TODO need this for burst mode later on */ + iwl_tx_cmd_build_basic(priv, tx_cmd, info, hdr, sta_id); + + /* set is_hcca to 0; it probably will never be implemented */ + iwl_tx_cmd_build_rate(priv, tx_cmd, info, fc, sta_id, 0); + + iwl_update_tx_stats(priv, le16_to_cpu(fc), len); + /* * Use the first empty entry in this queue's command buffer array * to contain the Tx command and MAC header concatenated together @@ -819,21 +835,30 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) else len_org = 0; + /* Tell NIC about any 2-byte padding after MAC header */ + if (len_org) + tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK; + /* Physical address of this Tx command's header (not MAC header!), * within command buffer array. */ txcmd_phys = pci_map_single(priv->pci_dev, - out_cmd, sizeof(struct iwl_cmd), + &out_cmd->hdr, len, PCI_DMA_BIDIRECTIONAL); pci_unmap_addr_set(&out_cmd->meta, mapping, txcmd_phys); - pci_unmap_len_set(&out_cmd->meta, len, sizeof(struct iwl_cmd)); + pci_unmap_len_set(&out_cmd->meta, len, len); /* Add buffer containing Tx command and MAC(!) header to TFD's * first entry */ - txcmd_phys += offsetof(struct iwl_cmd, hdr); priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq, txcmd_phys, len, 1, 0); - if (info->control.hw_key) - iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id); + if (!ieee80211_has_morefrags(hdr->frame_control)) { + txq->need_update = 1; + if (qc) + priv->stations[sta_id].tid[tid].seq_number = seq_number; + } else { + wait_write_ptr = 1; + txq->need_update = 0; + } /* Set up TFD's 2nd entry to point directly to remainder of skb, * if any (802.11 null frames have no payload). */ @@ -846,35 +871,17 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) 0, 0); } - /* Tell NIC about any 2-byte padding after MAC header */ - if (len_org) - tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK; - - /* Total # bytes to be transmitted */ - len = (u16)skb->len; - tx_cmd->len = cpu_to_le16(len); - /* TODO need this for burst mode later on */ - iwl_tx_cmd_build_basic(priv, tx_cmd, info, hdr, sta_id); - - /* set is_hcca to 0; it probably will never be implemented */ - iwl_tx_cmd_build_rate(priv, tx_cmd, info, fc, sta_id, 0); - - iwl_update_tx_stats(priv, le16_to_cpu(fc), len); - scratch_phys = txcmd_phys + sizeof(struct iwl_cmd_header) + - offsetof(struct iwl_tx_cmd, scratch); + offsetof(struct iwl_tx_cmd, scratch); + + len = sizeof(struct iwl_tx_cmd) + + sizeof(struct iwl_cmd_header) + hdr_len; + /* take back ownership of DMA buffer to enable update */ + pci_dma_sync_single_for_cpu(priv->pci_dev, txcmd_phys, + len, PCI_DMA_BIDIRECTIONAL); tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys); tx_cmd->dram_msb_ptr = iwl_get_dma_hi_addr(scratch_phys); - if (!ieee80211_has_morefrags(hdr->frame_control)) { - txq->need_update = 1; - if (qc) - priv->stations[sta_id].tid[tid].seq_number = seq_number; - } else { - wait_write_ptr = 1; - txq->need_update = 0; - } - IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n", le16_to_cpu(out_cmd->hdr.sequence)); IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx_cmd->tx_flags)); @@ -882,7 +889,11 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len); /* Set up entry for this TFD in Tx byte-count array */ - priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, len); + priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, + le16_to_cpu(tx_cmd->len)); + + pci_dma_sync_single_for_device(priv->pci_dev, txcmd_phys, + len, PCI_DMA_BIDIRECTIONAL); /* Tell device the write index *just past* this latest filled TFD */ q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd); @@ -970,18 +981,9 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) INDEX_TO_SEQ(q->write_ptr)); if (out_cmd->meta.flags & CMD_SIZE_HUGE) out_cmd->hdr.sequence |= SEQ_HUGE_FRAME; - len = (idx == TFD_CMD_SLOTS) ? - IWL_MAX_SCAN_SIZE : sizeof(struct iwl_cmd); + len = sizeof(struct iwl_cmd) - sizeof(struct iwl_cmd_meta); + len += (idx == TFD_CMD_SLOTS) ? IWL_MAX_SCAN_SIZE : 0; - phys_addr = pci_map_single(priv->pci_dev, out_cmd, - len, PCI_DMA_BIDIRECTIONAL); - pci_unmap_addr_set(&out_cmd->meta, mapping, phys_addr); - pci_unmap_len_set(&out_cmd->meta, len, len); - phys_addr += offsetof(struct iwl_cmd, hdr); - - priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq, - phys_addr, fix_size, 1, - U32_PAD(cmd->len)); #ifdef CONFIG_IWLWIFI_DEBUG switch (out_cmd->hdr.cmd) { @@ -1009,6 +1011,15 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) /* Set up entry in queue's byte count circular buffer */ priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, 0); + phys_addr = pci_map_single(priv->pci_dev, &out_cmd->hdr, + fix_size, PCI_DMA_BIDIRECTIONAL); + pci_unmap_addr_set(&out_cmd->meta, mapping, phys_addr); + pci_unmap_len_set(&out_cmd->meta, len, fix_size); + + priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq, + phys_addr, fix_size, 1, + U32_PAD(cmd->len)); + /* Increment and update queue's write index */ q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd); ret = iwl_txq_update_write_ptr(priv, txq); diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index acefc3721267..617c4235d971 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -972,7 +972,7 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) dma_addr_t phys_addr; dma_addr_t txcmd_phys; int txq_id = skb_get_queue_mapping(skb); - u16 len, idx, len_org, hdr_len; + u16 len, idx, len_org, hdr_len; /* TODO: len_org is not used */ u8 id; u8 unicast; u8 sta_id; @@ -1074,6 +1074,40 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) /* Copy MAC header from skb into command buffer */ memcpy(tx->hdr, hdr, hdr_len); + + if (info->control.hw_key) + iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, sta_id); + + /* TODO need this for burst mode later on */ + iwl3945_build_tx_cmd_basic(priv, out_cmd, info, hdr, sta_id); + + /* set is_hcca to 0; it probably will never be implemented */ + iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, info, hdr, sta_id, 0); + + /* Total # bytes to be transmitted */ + len = (u16)skb->len; + tx->len = cpu_to_le16(len); + + + tx->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK; + tx->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK; + + if (!ieee80211_has_morefrags(hdr->frame_control)) { + txq->need_update = 1; + if (qc) + priv->stations_39[sta_id].tid[tid].seq_number = seq_number; + } else { + wait_write_ptr = 1; + txq->need_update = 0; + } + + IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n", + le16_to_cpu(out_cmd->hdr.sequence)); + IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx->tx_flags)); + iwl_print_hex_dump(priv, IWL_DL_TX, tx, sizeof(*tx)); + iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx->hdr, + ieee80211_hdrlen(fc)); + /* * Use the first empty entry in this queue's command buffer array * to contain the Tx command and MAC header concatenated together @@ -1096,22 +1130,18 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) /* Physical address of this Tx command's header (not MAC header!), * within command buffer array. */ - txcmd_phys = pci_map_single(priv->pci_dev, - out_cmd, sizeof(struct iwl_cmd), - PCI_DMA_TODEVICE); + txcmd_phys = pci_map_single(priv->pci_dev, &out_cmd->hdr, + len, PCI_DMA_TODEVICE); + /* we do not map meta data ... so we can safely access address to + * provide to unmap command*/ pci_unmap_addr_set(&out_cmd->meta, mapping, txcmd_phys); - pci_unmap_len_set(&out_cmd->meta, len, sizeof(struct iwl_cmd)); - /* Add buffer containing Tx command and MAC(!) header to TFD's - * first entry */ - txcmd_phys += offsetof(struct iwl_cmd, hdr); + pci_unmap_len_set(&out_cmd->meta, len, len); /* Add buffer containing Tx command and MAC(!) header to TFD's * first entry */ priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq, txcmd_phys, len, 1, 0); - if (info->control.hw_key) - iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, sta_id); /* Set up TFD's 2nd entry to point directly to remainder of skb, * if any (802.11 null frames have no payload). */ @@ -1124,34 +1154,6 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) 0, U32_PAD(len)); } - /* Total # bytes to be transmitted */ - len = (u16)skb->len; - tx->len = cpu_to_le16(len); - - /* TODO need this for burst mode later on */ - iwl3945_build_tx_cmd_basic(priv, out_cmd, info, hdr, sta_id); - - /* set is_hcca to 0; it probably will never be implemented */ - iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, info, hdr, sta_id, 0); - - tx->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK; - tx->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK; - - if (!ieee80211_has_morefrags(hdr->frame_control)) { - txq->need_update = 1; - if (qc) - priv->stations_39[sta_id].tid[tid].seq_number = seq_number; - } else { - wait_write_ptr = 1; - txq->need_update = 0; - } - - IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n", - le16_to_cpu(out_cmd->hdr.sequence)); - IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx->tx_flags)); - iwl_print_hex_dump(priv, IWL_DL_TX, tx, sizeof(*tx)); - iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx->hdr, - ieee80211_hdrlen(fc)); /* Tell device the write index *just past* this latest filled TFD */ q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd); @@ -1663,6 +1665,37 @@ static void iwl3945_rx_allocate(struct iwl_priv *priv) spin_unlock_irqrestore(&rxq->lock, flags); } +void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) +{ + unsigned long flags; + int i; + spin_lock_irqsave(&rxq->lock, flags); + INIT_LIST_HEAD(&rxq->rx_free); + INIT_LIST_HEAD(&rxq->rx_used); + /* Fill the rx_used queue with _all_ of the Rx buffers */ + for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) { + /* In the reset function, these buffers may have been allocated + * to an SKB, so we need to unmap and free potential storage */ + if (rxq->pool[i].skb != NULL) { + pci_unmap_single(priv->pci_dev, + rxq->pool[i].real_dma_addr, + priv->hw_params.rx_buf_size, + PCI_DMA_FROMDEVICE); + priv->alloc_rxb_skb--; + dev_kfree_skb(rxq->pool[i].skb); + rxq->pool[i].skb = NULL; + } + list_add_tail(&rxq->pool[i].list, &rxq->rx_used); + } + + /* Set us so that we have processed and used all buffers, but have + * not restocked the Rx queue with fresh buffers */ + rxq->read = rxq->write = 0; + rxq->free_count = 0; + spin_unlock_irqrestore(&rxq->lock, flags); +} +EXPORT_SYMBOL(iwl3945_rx_queue_reset); + /* * this should be called while priv->lock is locked */ @@ -1687,6 +1720,34 @@ void iwl3945_rx_replenish(void *data) spin_unlock_irqrestore(&priv->lock, flags); } +/* Assumes that the skb field of the buffers in 'pool' is kept accurate. + * If an SKB has been detached, the POOL needs to have its SKB set to NULL + * This free routine walks the list of POOL entries and if SKB is set to + * non NULL it is unmapped and freed + */ +static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq) +{ + int i; + for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) { + if (rxq->pool[i].skb != NULL) { + pci_unmap_single(priv->pci_dev, + rxq->pool[i].real_dma_addr, + priv->hw_params.rx_buf_size, + PCI_DMA_FROMDEVICE); + dev_kfree_skb(rxq->pool[i].skb); + } + } + + pci_free_consistent(priv->pci_dev, 4 * RX_QUEUE_SIZE, rxq->bd, + rxq->dma_addr); + pci_free_consistent(priv->pci_dev, sizeof(struct iwl_rb_status), + rxq->rb_stts, rxq->rb_stts_dma); + rxq->bd = NULL; + rxq->rb_stts = NULL; +} +EXPORT_SYMBOL(iwl3945_rx_queue_free); + + /* Convert linear signal-to-noise ratio into dB */ static u8 ratio2dB[100] = { /* 0 1 2 3 4 5 6 7 8 9 */ @@ -1804,9 +1865,9 @@ static void iwl3945_rx_handle(struct iwl_priv *priv) rxq->queue[i] = NULL; - pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->real_dma_addr, - priv->hw_params.rx_buf_size, - PCI_DMA_FROMDEVICE); + pci_unmap_single(priv->pci_dev, rxb->real_dma_addr, + priv->hw_params.rx_buf_size, + PCI_DMA_FROMDEVICE); pkt = (struct iwl_rx_packet *)rxb->skb->data; /* Reclaim a command buffer only if this packet is a response @@ -1854,9 +1915,6 @@ static void iwl3945_rx_handle(struct iwl_priv *priv) rxb->skb = NULL; } - pci_unmap_single(priv->pci_dev, rxb->real_dma_addr, - priv->hw_params.rx_buf_size, - PCI_DMA_FROMDEVICE); spin_lock_irqsave(&rxq->lock, flags); list_add_tail(&rxb->list, &priv->rxq.rx_used); spin_unlock_irqrestore(&rxq->lock, flags); @@ -5203,7 +5261,7 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev) iwl3945_dealloc_ucode_pci(priv); if (priv->rxq.bd) - iwl_rx_queue_free(priv, &priv->rxq); + iwl3945_rx_queue_free(priv, &priv->rxq); iwl3945_hw_txq_ctx_free(priv); iwl3945_unset_hw_params(priv); -- cgit v1.2.3 From bbe188c8f16effd902d1ad391e06e41ce649b22e Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Tue, 21 Apr 2009 06:04:20 +0000 Subject: af_iucv: consider state IUCV_CLOSING when closing a socket Make sure a second invocation of iucv_sock_close() guarantees proper freeing of an iucv path. Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/iucv/af_iucv.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c index 49e786535dc8..2941ee50393b 100644 --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -172,6 +172,7 @@ static void iucv_sock_close(struct sock *sk) err = iucv_sock_wait_state(sk, IUCV_CLOSED, 0, timeo); } + case IUCV_CLOSING: /* fall through */ sk->sk_state = IUCV_CLOSED; sk->sk_state_change(sk); @@ -224,6 +225,8 @@ static struct sock *iucv_sock_alloc(struct socket *sock, int proto, gfp_t prio) spin_lock_init(&iucv_sk(sk)->message_q.lock); skb_queue_head_init(&iucv_sk(sk)->backlog_skb_q); iucv_sk(sk)->send_tag = 0; + iucv_sk(sk)->path = NULL; + memset(&iucv_sk(sk)->src_user_id , 0, 32); sk->sk_destruct = iucv_sock_destruct; sk->sk_sndtimeo = IUCV_CONN_TIMEOUT; -- cgit v1.2.3 From 60d3705fcbfe7deca8e94bc7ddecd6f9f1a4647e Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Tue, 21 Apr 2009 06:04:21 +0000 Subject: af_iucv: fix oops in iucv_sock_recvmsg() for MSG_PEEK flag If iucv_sock_recvmsg() is called with MSG_PEEK flag set, the skb is enqueued twice. If the socket is then closed, the pointer to the skb is freed twice. Remove the skb_queue_head() call for MSG_PEEK, because the skb_recv_datagram() function already handles MSG_PEEK (does not dequeue the skb). Signed-off-by: Hendrik Brueckner Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/iucv/af_iucv.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c index 2941ee50393b..42b3be302c57 100644 --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -814,6 +814,8 @@ static int iucv_sock_recvmsg(struct kiocb *iocb, struct socket *sock, target = sock_rcvlowat(sk, flags & MSG_WAITALL, len); + /* receive/dequeue next skb: + * the function understands MSG_PEEK and, thus, does not dequeue skb */ skb = skb_recv_datagram(sk, flags, noblock, &err); if (!skb) { if (sk->sk_shutdown & RCV_SHUTDOWN) @@ -861,9 +863,7 @@ static int iucv_sock_recvmsg(struct kiocb *iocb, struct socket *sock, iucv_process_message_q(sk); spin_unlock_bh(&iucv->message_q.lock); } - - } else - skb_queue_head(&sk->sk_receive_queue, skb); + } done: return err ? : copied; -- cgit v1.2.3 From fe86e54ef9465c97a16337d2a41a4cf486b937ae Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Tue, 21 Apr 2009 06:04:22 +0000 Subject: af_iucv: Reject incoming msgs if RECV_SHUTDOWN is set Reject incoming iucv messages if the receive direction has been shut down. It avoids that the queue of outstanding messages increases and exceeds the message limit of the iucv communication path. Signed-off-by: Hendrik Brueckner Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/iucv/af_iucv.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c index 42b3be302c57..ee517108856e 100644 --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -1116,8 +1116,10 @@ static void iucv_callback_rx(struct iucv_path *path, struct iucv_message *msg) struct sock_msg_q *save_msg; int len; - if (sk->sk_shutdown & RCV_SHUTDOWN) + if (sk->sk_shutdown & RCV_SHUTDOWN) { + iucv_message_reject(path, msg); return; + } if (!list_empty(&iucv->message_q.list) || !skb_queue_empty(&iucv->backlog_skb_q)) -- cgit v1.2.3 From e14ad5fa8705fb354e72312479abbe420ebc3f8e Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Tue, 21 Apr 2009 06:04:23 +0000 Subject: af_iucv: Test additional sk states in iucv_sock_shutdown Add few more sk states in iucv_sock_shutdown(). Signed-off-by: Hendrik Brueckner Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/iucv/af_iucv.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c index ee517108856e..9cfdaaddc5b2 100644 --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -937,6 +937,9 @@ static int iucv_sock_shutdown(struct socket *sock, int how) lock_sock(sk); switch (sk->sk_state) { + case IUCV_DISCONN: + case IUCV_CLOSING: + case IUCV_SEVERED: case IUCV_CLOSED: err = -ENOTCONN; goto fail; -- cgit v1.2.3 From 3fa6b5adbe46b3d665267dee0f879858ab464f44 Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Tue, 21 Apr 2009 06:04:24 +0000 Subject: af_iucv: Fix race when queuing incoming iucv messages AF_IUCV runs into a race when queuing incoming iucv messages and receiving the resulting backlog. If the Linux system is under pressure (high load or steal time), the message queue grows up, but messages are not received and queued onto the backlog queue. In that case, applications do not receive any data with recvmsg() even if AF_IUCV puts incoming messages onto the message queue. The race can be avoided if the message queue spinlock in the message_pending callback is spreaded across the entire callback function. Signed-off-by: Hendrik Brueckner Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/iucv/af_iucv.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c index 9cfdaaddc5b2..b51c9187c347 100644 --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -1124,6 +1124,8 @@ static void iucv_callback_rx(struct iucv_path *path, struct iucv_message *msg) return; } + spin_lock(&iucv->message_q.lock); + if (!list_empty(&iucv->message_q.list) || !skb_queue_empty(&iucv->backlog_skb_q)) goto save_message; @@ -1137,9 +1139,8 @@ static void iucv_callback_rx(struct iucv_path *path, struct iucv_message *msg) if (!skb) goto save_message; - spin_lock(&iucv->message_q.lock); iucv_process_message(sk, skb, path, msg); - spin_unlock(&iucv->message_q.lock); + goto out_unlock; return; @@ -1150,8 +1151,9 @@ save_message: save_msg->path = path; save_msg->msg = *msg; - spin_lock(&iucv->message_q.lock); list_add_tail(&save_msg->list, &iucv->message_q.list); + +out_unlock: spin_unlock(&iucv->message_q.lock); } -- cgit v1.2.3 From 3f9738f73ad08ef770df64f145007bd27ac2fa16 Mon Sep 17 00:00:00 2001 From: Jianjun kong Date: Mon, 20 Apr 2009 23:48:25 +0000 Subject: 8139too: fix HW initial flow While ifconfig eth0 up kernel calls open() of 8139 driver(8139too.c). In rtl8139_hw_start() of rtl8139_open(), 8139 driver enable RX before setting up the DMA buffer address. In this interval where RX was enabled and DMA buffer address is not yet set up, any incoming broadcast packet would be send to a strange physical address: 0x003e8800 which is the default value of DMA buffer address. Unfortunately, this address is used by Linux kernel. So kernel panics. This patch fix it by setting up DMA buffer address before RX enabled and everything is fine even under broadcast packets attack. Signed-off-by: Jonathan Lin Signed-off-by: Amos Kong Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/8139too.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index 29df398b7727..1fc45431a620 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -1383,6 +1383,11 @@ static void rtl8139_hw_start (struct net_device *dev) RTL_W32_F (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0))); RTL_W32_F (MAC0 + 4, le16_to_cpu (*(__le16 *) (dev->dev_addr + 4))); + tp->cur_rx = 0; + + /* init Rx ring buffer DMA address */ + RTL_W32_F (RxBuf, tp->rx_ring_dma); + /* Must enable Tx/Rx before setting transfer thresholds! */ RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb); @@ -1390,8 +1395,6 @@ static void rtl8139_hw_start (struct net_device *dev) RTL_W32 (RxConfig, tp->rx_config); RTL_W32 (TxConfig, rtl8139_tx_config); - tp->cur_rx = 0; - rtl_check_media (dev, 1); if (tp->chipset >= CH_8139B) { @@ -1406,9 +1409,6 @@ static void rtl8139_hw_start (struct net_device *dev) /* Lock Config[01234] and BMCR register writes */ RTL_W8 (Cfg9346, Cfg9346_Lock); - /* init Rx ring buffer DMA address */ - RTL_W32_F (RxBuf, tp->rx_ring_dma); - /* init Tx buffer DMA addresses */ for (i = 0; i < NUM_TX_DESC; i++) RTL_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs)); -- cgit v1.2.3 From cef309cf6112f9a44b1ebcefc1641d01d35c83dc Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Mon, 20 Apr 2009 22:36:43 +0000 Subject: ucc_geth.c: Fix upsmr setting in RMII mode If using the UCC on a MPC8360 in RMII mode, don;t set UCC_GETH_UPSMR_RPM bit in the upsmr register. Signed-off-by: Heiko Schocher Acked-by: Li Yang Signed-off-by: David S. Miller --- drivers/net/ucc_geth.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index d3f39e86eb95..44f8392da117 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -1394,7 +1394,8 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth) (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID) || (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID) || (ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) { - upsmr |= UCC_GETH_UPSMR_RPM; + if (ugeth->phy_interface != PHY_INTERFACE_MODE_RMII) + upsmr |= UCC_GETH_UPSMR_RPM; switch (ugeth->max_speed) { case SPEED_10: upsmr |= UCC_GETH_UPSMR_R10M; -- cgit v1.2.3 From 50b2ff1bc47baacb8e9882b2b2a74b240ddbeecf Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Tue, 21 Apr 2009 10:04:22 +0000 Subject: netlabel: Always remove the correct address selector The NetLabel address selector mechanism has a problem where it can get mistakenly remove the wrong selector when similar addresses are used. The problem is caused when multiple addresses are configured that have different netmasks but the same address, e.g. 127.0.0.0/8 and 127.0.0.0/24. This patch fixes the problem. Reported-by: Etienne Basset Signed-off-by: Paul Moore Acked-by: James Morris Tested-by: Etienne Basset Signed-off-by: David S. Miller --- net/netlabel/netlabel_addrlist.c | 26 ++++++++++---------------- 1 file changed, 10 insertions(+), 16 deletions(-) diff --git a/net/netlabel/netlabel_addrlist.c b/net/netlabel/netlabel_addrlist.c index 834c6eb7f484..c0519139679e 100644 --- a/net/netlabel/netlabel_addrlist.c +++ b/net/netlabel/netlabel_addrlist.c @@ -256,13 +256,11 @@ struct netlbl_af4list *netlbl_af4list_remove(__be32 addr, __be32 mask, { struct netlbl_af4list *entry; - entry = netlbl_af4list_search(addr, head); - if (entry != NULL && entry->addr == addr && entry->mask == mask) { - netlbl_af4list_remove_entry(entry); - return entry; - } - - return NULL; + entry = netlbl_af4list_search_exact(addr, mask, head); + if (entry == NULL) + return NULL; + netlbl_af4list_remove_entry(entry); + return entry; } #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) @@ -299,15 +297,11 @@ struct netlbl_af6list *netlbl_af6list_remove(const struct in6_addr *addr, { struct netlbl_af6list *entry; - entry = netlbl_af6list_search(addr, head); - if (entry != NULL && - ipv6_addr_equal(&entry->addr, addr) && - ipv6_addr_equal(&entry->mask, mask)) { - netlbl_af6list_remove_entry(entry); - return entry; - } - - return NULL; + entry = netlbl_af6list_search_exact(addr, mask, head); + if (entry == NULL) + return NULL; + netlbl_af6list_remove_entry(entry); + return entry; } #endif /* IPv6 */ -- cgit v1.2.3 From cc29c70dd581f85ee7a3e7980fb031f90b90a2ab Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 22 Apr 2009 00:49:51 -0700 Subject: net/netrom: Fix socket locking Patch "af_rose/x25: Sanity check the maximum user frame size" (commit 83e0bbcbe2145f160fbaa109b0439dae7f4a38a9) from Alan Cox got locking wrong. If we bail out due to user frame size being too large, we must unlock the socket beforehand. Signed-off-by: Jean Delvare Signed-off-by: David S. Miller --- net/netrom/af_netrom.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c index 4e705f87969f..3be0e016ab7d 100644 --- a/net/netrom/af_netrom.c +++ b/net/netrom/af_netrom.c @@ -1084,8 +1084,10 @@ static int nr_sendmsg(struct kiocb *iocb, struct socket *sock, /* Build a packet - the conventional user limit is 236 bytes. We can do ludicrously large NetROM frames but must not overflow */ - if (len > 65536) - return -EMSGSIZE; + if (len > 65536) { + err = -EMSGSIZE; + goto out; + } SOCK_DEBUG(sk, "NET/ROM: sendto: building packet.\n"); size = len + NR_NETWORK_LEN + NR_TRANSPORT_LEN; -- cgit v1.2.3 From 29fe1b481283a1bada994a69f65736db4ae6f35f Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Wed, 22 Apr 2009 02:26:37 -0700 Subject: netfilter: ctnetlink: fix gcc warning during compilation This patch fixes a (bogus?) gcc warning during compilation: net/netfilter/nf_conntrack_netlink.c:1234: warning: 'helpname' may be used uninitialized in this function net/netfilter/nf_conntrack_netlink.c:991: warning: 'helpname' may be used uninitialized in this function In fact, helpname is initialized by ctnetlink_parse_help() so I cannot see a way to use it without being initialized. Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_netlink.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 0ea36e0c8a0e..f13fc57e1ecb 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -988,7 +988,7 @@ ctnetlink_change_helper(struct nf_conn *ct, struct nlattr *cda[]) { struct nf_conntrack_helper *helper; struct nf_conn_help *help = nfct_help(ct); - char *helpname; + char *helpname = NULL; int err; /* don't change helper of sibling connections */ @@ -1231,7 +1231,7 @@ ctnetlink_create_conntrack(struct nlattr *cda[], rcu_read_lock(); if (cda[CTA_HELP]) { - char *helpname; + char *helpname = NULL; err = ctnetlink_parse_help(cda[CTA_HELP], &helpname); if (err < 0) -- cgit v1.2.3