From 54f9c4d0778b3f9ab791b1b7eb1a5d2809f02f50 Mon Sep 17 00:00:00 2001 From: Alistair Popple Date: Tue, 20 Sep 2016 09:01:38 +0200 Subject: ipmi: add an Aspeed BT IPMI BMC driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds a simple device driver to expose the iBT interface on Aspeed SOCs (AST2400 and AST2500) as a character device. Such SOCs are commonly used as BMCs (BaseBoard Management Controllers) and this driver implements the BMC side of the BT interface. The BT (Block Transfer) interface is used to perform in-band IPMI communication between a host and its BMC. Entire messages are buffered before sending a notification to the other end, host or BMC, that there is data to be read. Usually, the host emits requests and the BMC responses but the specification provides a mean for the BMC to send SMS Attention (BMC-to-Host attention or System Management Software attention) messages. For this purpose, the driver introduces a specific ioctl on the device: 'BT_BMC_IOCTL_SMS_ATN' that can be used by the system running on the BMC to signal the host of such an event. The device name defaults to '/dev/ipmi-bt-host' Signed-off-by: Alistair Popple Signed-off-by: Jeremy Kerr Signed-off-by: Joel Stanley [clg: - checkpatch fixes - added a devicetree binding documentation - replace 'bt_host' by 'bt_bmc' to reflect that the driver is the BMC side of the IPMI BT interface - renamed the device to 'ipmi-bt-host' - introduced a temporary buffer to copy_{to,from}_user - used platform_get_irq() - moved the driver under drivers/char/ipmi/ but kept it as a misc device - changed the compatible cell to "aspeed,ast2400-bt-bmc" ] Signed-off-by: Cédric Le Goater Acked-by: Arnd Bergmann [clg: - checkpatch --strict fixes - removed the use of devm_iounmap, devm_kfree in cleanup paths - introduced an atomic-t to limit opens to 1 - introduced a mutex to protect write/read operations] Acked-by: Rob Herring Signed-off-by: Cédric Le Goater Signed-off-by: Corey Minyard --- Documentation/devicetree/bindings/ipmi.txt | 25 - .../bindings/ipmi/aspeed,ast2400-bt-bmc.txt | 23 + .../devicetree/bindings/ipmi/ipmi-smic.txt | 25 + drivers/Makefile | 2 +- drivers/char/ipmi/Kconfig | 7 + drivers/char/ipmi/Makefile | 1 + drivers/char/ipmi/bt-bmc.c | 510 +++++++++++++++++++++ include/uapi/linux/Kbuild | 1 + include/uapi/linux/bt-bmc.h | 18 + 9 files changed, 586 insertions(+), 26 deletions(-) delete mode 100644 Documentation/devicetree/bindings/ipmi.txt create mode 100644 Documentation/devicetree/bindings/ipmi/aspeed,ast2400-bt-bmc.txt create mode 100644 Documentation/devicetree/bindings/ipmi/ipmi-smic.txt create mode 100644 drivers/char/ipmi/bt-bmc.c create mode 100644 include/uapi/linux/bt-bmc.h diff --git a/Documentation/devicetree/bindings/ipmi.txt b/Documentation/devicetree/bindings/ipmi.txt deleted file mode 100644 index d5f1a877ed3e..000000000000 --- a/Documentation/devicetree/bindings/ipmi.txt +++ /dev/null @@ -1,25 +0,0 @@ -IPMI device - -Required properties: -- compatible: should be one of ipmi-kcs, ipmi-smic, or ipmi-bt -- device_type: should be ipmi -- reg: Address and length of the register set for the device - -Optional properties: -- interrupts: The interrupt for the device. Without this the interface - is polled. -- reg-size - The size of the register. Defaults to 1 -- reg-spacing - The number of bytes between register starts. Defaults to 1 -- reg-shift - The amount to shift the registers to the right to get the data - into bit zero. - -Example: - -smic@fff3a000 { - compatible = "ipmi-smic"; - device_type = "ipmi"; - reg = <0xfff3a000 0x1000>; - interrupts = <0 24 4>; - reg-size = <4>; - reg-spacing = <4>; -}; diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-bt-bmc.txt b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-bt-bmc.txt new file mode 100644 index 000000000000..fbbacd958240 --- /dev/null +++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-bt-bmc.txt @@ -0,0 +1,23 @@ +* Aspeed BT (Block Transfer) IPMI interface + +The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs +(BaseBoard Management Controllers) and the BT interface can be used to +perform in-band IPMI communication with their host. + +Required properties: + +- compatible : should be "aspeed,ast2400-bt-bmc" +- reg: physical address and size of the registers + +Optional properties: + +- interrupts: interrupt generated by the BT interface. without an + interrupt, the driver will operate in poll mode. + +Example: + + ibt@1e789140 { + compatible = "aspeed,ast2400-bt-bmc"; + reg = <0x1e789140 0x18>; + interrupts = <8>; + }; diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt b/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt new file mode 100644 index 000000000000..d5f1a877ed3e --- /dev/null +++ b/Documentation/devicetree/bindings/ipmi/ipmi-smic.txt @@ -0,0 +1,25 @@ +IPMI device + +Required properties: +- compatible: should be one of ipmi-kcs, ipmi-smic, or ipmi-bt +- device_type: should be ipmi +- reg: Address and length of the register set for the device + +Optional properties: +- interrupts: The interrupt for the device. Without this the interface + is polled. +- reg-size - The size of the register. Defaults to 1 +- reg-spacing - The number of bytes between register starts. Defaults to 1 +- reg-shift - The amount to shift the registers to the right to get the data + into bit zero. + +Example: + +smic@fff3a000 { + compatible = "ipmi-smic"; + device_type = "ipmi"; + reg = <0xfff3a000 0x1000>; + interrupts = <0 24 4>; + reg-size = <4>; + reg-spacing = <4>; +}; diff --git a/drivers/Makefile b/drivers/Makefile index 53abb4a5f736..5a9e7b6b7928 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -21,7 +21,7 @@ obj-y += video/ obj-y += idle/ # IPMI must come before ACPI in order to provide IPMI opregion support -obj-$(CONFIG_IPMI_HANDLER) += char/ipmi/ +obj-y += char/ipmi/ obj-$(CONFIG_ACPI) += acpi/ obj-$(CONFIG_SFI) += sfi/ diff --git a/drivers/char/ipmi/Kconfig b/drivers/char/ipmi/Kconfig index 5a9350b1069a..2c234e3e7513 100644 --- a/drivers/char/ipmi/Kconfig +++ b/drivers/char/ipmi/Kconfig @@ -76,3 +76,10 @@ config IPMI_POWEROFF the IPMI management controller is capable of this. endif # IPMI_HANDLER + +config ASPEED_BT_IPMI_BMC + tristate "BT IPMI bmc driver" + help + Provides a driver for the BT (Block Transfer) IPMI interface + found on Aspeed SOCs (AST2400 and AST2500). The driver + implements the BMC side of the BT interface. diff --git a/drivers/char/ipmi/Makefile b/drivers/char/ipmi/Makefile index f3ffde1f5f1f..0d98cd91def1 100644 --- a/drivers/char/ipmi/Makefile +++ b/drivers/char/ipmi/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_IPMI_SSIF) += ipmi_ssif.o obj-$(CONFIG_IPMI_POWERNV) += ipmi_powernv.o obj-$(CONFIG_IPMI_WATCHDOG) += ipmi_watchdog.o obj-$(CONFIG_IPMI_POWEROFF) += ipmi_poweroff.o +obj-$(CONFIG_ASPEED_BT_IPMI_BMC) += bt-bmc.o diff --git a/drivers/char/ipmi/bt-bmc.c b/drivers/char/ipmi/bt-bmc.c new file mode 100644 index 000000000000..2e880bf0be26 --- /dev/null +++ b/drivers/char/ipmi/bt-bmc.c @@ -0,0 +1,510 @@ +/* + * Copyright (c) 2015-2016, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * This is a BMC device used to communicate to the host + */ +#define DEVICE_NAME "ipmi-bt-host" + +#define BT_IO_BASE 0xe4 +#define BT_IRQ 10 + +#define BT_CR0 0x0 +#define BT_CR0_IO_BASE 16 +#define BT_CR0_IRQ 12 +#define BT_CR0_EN_CLR_SLV_RDP 0x8 +#define BT_CR0_EN_CLR_SLV_WRP 0x4 +#define BT_CR0_ENABLE_IBT 0x1 +#define BT_CR1 0x4 +#define BT_CR1_IRQ_H2B 0x01 +#define BT_CR1_IRQ_HBUSY 0x40 +#define BT_CR2 0x8 +#define BT_CR2_IRQ_H2B 0x01 +#define BT_CR2_IRQ_HBUSY 0x40 +#define BT_CR3 0xc +#define BT_CTRL 0x10 +#define BT_CTRL_B_BUSY 0x80 +#define BT_CTRL_H_BUSY 0x40 +#define BT_CTRL_OEM0 0x20 +#define BT_CTRL_SMS_ATN 0x10 +#define BT_CTRL_B2H_ATN 0x08 +#define BT_CTRL_H2B_ATN 0x04 +#define BT_CTRL_CLR_RD_PTR 0x02 +#define BT_CTRL_CLR_WR_PTR 0x01 +#define BT_BMC2HOST 0x14 +#define BT_INTMASK 0x18 +#define BT_INTMASK_B2H_IRQEN 0x01 +#define BT_INTMASK_B2H_IRQ 0x02 +#define BT_INTMASK_BMC_HWRST 0x80 + +#define BT_BMC_BUFFER_SIZE 256 + +struct bt_bmc { + struct device dev; + struct miscdevice miscdev; + void __iomem *base; + int irq; + wait_queue_head_t queue; + struct timer_list poll_timer; + struct mutex mutex; +}; + +static atomic_t open_count = ATOMIC_INIT(0); + +static u8 bt_inb(struct bt_bmc *bt_bmc, int reg) +{ + return ioread8(bt_bmc->base + reg); +} + +static void bt_outb(struct bt_bmc *bt_bmc, u8 data, int reg) +{ + iowrite8(data, bt_bmc->base + reg); +} + +static void clr_rd_ptr(struct bt_bmc *bt_bmc) +{ + bt_outb(bt_bmc, BT_CTRL_CLR_RD_PTR, BT_CTRL); +} + +static void clr_wr_ptr(struct bt_bmc *bt_bmc) +{ + bt_outb(bt_bmc, BT_CTRL_CLR_WR_PTR, BT_CTRL); +} + +static void clr_h2b_atn(struct bt_bmc *bt_bmc) +{ + bt_outb(bt_bmc, BT_CTRL_H2B_ATN, BT_CTRL); +} + +static void set_b_busy(struct bt_bmc *bt_bmc) +{ + if (!(bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_B_BUSY)) + bt_outb(bt_bmc, BT_CTRL_B_BUSY, BT_CTRL); +} + +static void clr_b_busy(struct bt_bmc *bt_bmc) +{ + if (bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_B_BUSY) + bt_outb(bt_bmc, BT_CTRL_B_BUSY, BT_CTRL); +} + +static void set_b2h_atn(struct bt_bmc *bt_bmc) +{ + bt_outb(bt_bmc, BT_CTRL_B2H_ATN, BT_CTRL); +} + +static u8 bt_read(struct bt_bmc *bt_bmc) +{ + return bt_inb(bt_bmc, BT_BMC2HOST); +} + +static ssize_t bt_readn(struct bt_bmc *bt_bmc, u8 *buf, size_t n) +{ + int i; + + for (i = 0; i < n; i++) + buf[i] = bt_read(bt_bmc); + return n; +} + +static void bt_write(struct bt_bmc *bt_bmc, u8 c) +{ + bt_outb(bt_bmc, c, BT_BMC2HOST); +} + +static ssize_t bt_writen(struct bt_bmc *bt_bmc, u8 *buf, size_t n) +{ + int i; + + for (i = 0; i < n; i++) + bt_write(bt_bmc, buf[i]); + return n; +} + +static void set_sms_atn(struct bt_bmc *bt_bmc) +{ + bt_outb(bt_bmc, BT_CTRL_SMS_ATN, BT_CTRL); +} + +static struct bt_bmc *file_bt_bmc(struct file *file) +{ + return container_of(file->private_data, struct bt_bmc, miscdev); +} + +static int bt_bmc_open(struct inode *inode, struct file *file) +{ + struct bt_bmc *bt_bmc = file_bt_bmc(file); + + if (atomic_inc_return(&open_count) == 1) { + clr_b_busy(bt_bmc); + return 0; + } + + atomic_dec(&open_count); + return -EBUSY; +} + +/* + * The BT (Block Transfer) interface means that entire messages are + * buffered by the host before a notification is sent to the BMC that + * there is data to be read. The first byte is the length and the + * message data follows. The read operation just tries to capture the + * whole before returning it to userspace. + * + * BT Message format : + * + * Byte 1 Byte 2 Byte 3 Byte 4 Byte 5:N + * Length NetFn/LUN Seq Cmd Data + * + */ +static ssize_t bt_bmc_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct bt_bmc *bt_bmc = file_bt_bmc(file); + u8 len; + int len_byte = 1; + u8 kbuffer[BT_BMC_BUFFER_SIZE]; + ssize_t ret = 0; + ssize_t nread; + + if (!access_ok(VERIFY_WRITE, buf, count)) + return -EFAULT; + + WARN_ON(*ppos); + + if (wait_event_interruptible(bt_bmc->queue, + bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_H2B_ATN)) + return -ERESTARTSYS; + + mutex_lock(&bt_bmc->mutex); + + if (unlikely(!(bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_H2B_ATN))) { + ret = -EIO; + goto out_unlock; + } + + set_b_busy(bt_bmc); + clr_h2b_atn(bt_bmc); + clr_rd_ptr(bt_bmc); + + /* + * The BT frames start with the message length, which does not + * include the length byte. + */ + kbuffer[0] = bt_read(bt_bmc); + len = kbuffer[0]; + + /* We pass the length back to userspace as well */ + if (len + 1 > count) + len = count - 1; + + while (len) { + nread = min_t(ssize_t, len, sizeof(kbuffer) - len_byte); + + bt_readn(bt_bmc, kbuffer + len_byte, nread); + + if (copy_to_user(buf, kbuffer, nread + len_byte)) { + ret = -EFAULT; + break; + } + len -= nread; + buf += nread + len_byte; + ret += nread + len_byte; + len_byte = 0; + } + + clr_b_busy(bt_bmc); + +out_unlock: + mutex_unlock(&bt_bmc->mutex); + return ret; +} + +/* + * BT Message response format : + * + * Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6:N + * Length NetFn/LUN Seq Cmd Code Data + */ +static ssize_t bt_bmc_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct bt_bmc *bt_bmc = file_bt_bmc(file); + u8 kbuffer[BT_BMC_BUFFER_SIZE]; + ssize_t ret = 0; + ssize_t nwritten; + + /* + * send a minimum response size + */ + if (count < 5) + return -EINVAL; + + if (!access_ok(VERIFY_READ, buf, count)) + return -EFAULT; + + WARN_ON(*ppos); + + /* + * There's no interrupt for clearing bmc busy so we have to + * poll + */ + if (wait_event_interruptible(bt_bmc->queue, + !(bt_inb(bt_bmc, BT_CTRL) & + (BT_CTRL_H_BUSY | BT_CTRL_B2H_ATN)))) + return -ERESTARTSYS; + + mutex_lock(&bt_bmc->mutex); + + if (unlikely(bt_inb(bt_bmc, BT_CTRL) & + (BT_CTRL_H_BUSY | BT_CTRL_B2H_ATN))) { + ret = -EIO; + goto out_unlock; + } + + clr_wr_ptr(bt_bmc); + + while (count) { + nwritten = min_t(ssize_t, count, sizeof(kbuffer)); + if (copy_from_user(&kbuffer, buf, nwritten)) { + ret = -EFAULT; + break; + } + + bt_writen(bt_bmc, kbuffer, nwritten); + + count -= nwritten; + buf += nwritten; + ret += nwritten; + } + + set_b2h_atn(bt_bmc); + +out_unlock: + mutex_unlock(&bt_bmc->mutex); + return ret; +} + +static long bt_bmc_ioctl(struct file *file, unsigned int cmd, + unsigned long param) +{ + struct bt_bmc *bt_bmc = file_bt_bmc(file); + + switch (cmd) { + case BT_BMC_IOCTL_SMS_ATN: + set_sms_atn(bt_bmc); + return 0; + } + return -EINVAL; +} + +static int bt_bmc_release(struct inode *inode, struct file *file) +{ + struct bt_bmc *bt_bmc = file_bt_bmc(file); + + atomic_dec(&open_count); + set_b_busy(bt_bmc); + return 0; +} + +static unsigned int bt_bmc_poll(struct file *file, poll_table *wait) +{ + struct bt_bmc *bt_bmc = file_bt_bmc(file); + unsigned int mask = 0; + u8 ctrl; + + poll_wait(file, &bt_bmc->queue, wait); + + ctrl = bt_inb(bt_bmc, BT_CTRL); + + if (ctrl & BT_CTRL_H2B_ATN) + mask |= POLLIN; + + if (!(ctrl & (BT_CTRL_H_BUSY | BT_CTRL_B2H_ATN))) + mask |= POLLOUT; + + return mask; +} + +static const struct file_operations bt_bmc_fops = { + .owner = THIS_MODULE, + .open = bt_bmc_open, + .read = bt_bmc_read, + .write = bt_bmc_write, + .release = bt_bmc_release, + .poll = bt_bmc_poll, + .unlocked_ioctl = bt_bmc_ioctl, +}; + +static void poll_timer(unsigned long data) +{ + struct bt_bmc *bt_bmc = (void *)data; + + bt_bmc->poll_timer.expires += msecs_to_jiffies(500); + wake_up(&bt_bmc->queue); + add_timer(&bt_bmc->poll_timer); +} + +static irqreturn_t bt_bmc_irq(int irq, void *arg) +{ + struct bt_bmc *bt_bmc = arg; + u32 reg; + + reg = ioread32(bt_bmc->base + BT_CR2); + reg &= BT_CR2_IRQ_H2B | BT_CR2_IRQ_HBUSY; + if (!reg) + return IRQ_NONE; + + /* ack pending IRQs */ + iowrite32(reg, bt_bmc->base + BT_CR2); + + wake_up(&bt_bmc->queue); + return IRQ_HANDLED; +} + +static int bt_bmc_config_irq(struct bt_bmc *bt_bmc, + struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + u32 reg; + int rc; + + bt_bmc->irq = platform_get_irq(pdev, 0); + if (!bt_bmc->irq) + return -ENODEV; + + rc = devm_request_irq(dev, bt_bmc->irq, bt_bmc_irq, IRQF_SHARED, + DEVICE_NAME, bt_bmc); + if (rc < 0) { + dev_warn(dev, "Unable to request IRQ %d\n", bt_bmc->irq); + bt_bmc->irq = 0; + return rc; + } + + /* + * Configure IRQs on the bmc clearing the H2B and HBUSY bits; + * H2B will be asserted when the bmc has data for us; HBUSY + * will be cleared (along with B2H) when we can write the next + * message to the BT buffer + */ + reg = ioread32(bt_bmc->base + BT_CR1); + reg |= BT_CR1_IRQ_H2B | BT_CR1_IRQ_HBUSY; + iowrite32(reg, bt_bmc->base + BT_CR1); + + return 0; +} + +static int bt_bmc_probe(struct platform_device *pdev) +{ + struct bt_bmc *bt_bmc; + struct device *dev; + struct resource *res; + int rc; + + if (!pdev || !pdev->dev.of_node) + return -ENODEV; + + dev = &pdev->dev; + dev_info(dev, "Found bt bmc device\n"); + + bt_bmc = devm_kzalloc(dev, sizeof(*bt_bmc), GFP_KERNEL); + if (!bt_bmc) + return -ENOMEM; + + dev_set_drvdata(&pdev->dev, bt_bmc); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "Unable to find resources\n"); + return -ENXIO; + } + + bt_bmc->base = devm_ioremap_resource(&pdev->dev, res); + if (!bt_bmc->base) + return -ENOMEM; + + mutex_init(&bt_bmc->mutex); + init_waitqueue_head(&bt_bmc->queue); + + bt_bmc->miscdev.minor = MISC_DYNAMIC_MINOR, + bt_bmc->miscdev.name = DEVICE_NAME, + bt_bmc->miscdev.fops = &bt_bmc_fops, + bt_bmc->miscdev.parent = dev; + rc = misc_register(&bt_bmc->miscdev); + if (rc) { + dev_err(dev, "Unable to register misc device\n"); + return rc; + } + + bt_bmc_config_irq(bt_bmc, pdev); + + if (bt_bmc->irq) { + dev_info(dev, "Using IRQ %d\n", bt_bmc->irq); + } else { + dev_info(dev, "No IRQ; using timer\n"); + setup_timer(&bt_bmc->poll_timer, poll_timer, + (unsigned long)bt_bmc); + bt_bmc->poll_timer.expires = jiffies + msecs_to_jiffies(10); + add_timer(&bt_bmc->poll_timer); + } + + iowrite32((BT_IO_BASE << BT_CR0_IO_BASE) | + (BT_IRQ << BT_CR0_IRQ) | + BT_CR0_EN_CLR_SLV_RDP | + BT_CR0_EN_CLR_SLV_WRP | + BT_CR0_ENABLE_IBT, + bt_bmc->base + BT_CR0); + + clr_b_busy(bt_bmc); + + return 0; +} + +static int bt_bmc_remove(struct platform_device *pdev) +{ + struct bt_bmc *bt_bmc = dev_get_drvdata(&pdev->dev); + + misc_deregister(&bt_bmc->miscdev); + if (!bt_bmc->irq) + del_timer_sync(&bt_bmc->poll_timer); + return 0; +} + +static const struct of_device_id bt_bmc_match[] = { + { .compatible = "aspeed,ast2400-bt-bmc" }, + { }, +}; + +static struct platform_driver bt_bmc_driver = { + .driver = { + .name = DEVICE_NAME, + .of_match_table = bt_bmc_match, + }, + .probe = bt_bmc_probe, + .remove = bt_bmc_remove, +}; + +module_platform_driver(bt_bmc_driver); + +MODULE_DEVICE_TABLE(of, bt_bmc_match); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Alistair Popple "); +MODULE_DESCRIPTION("Linux device interface to the BT interface"); diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild index 185f8ea2702f..17b12942c67d 100644 --- a/include/uapi/linux/Kbuild +++ b/include/uapi/linux/Kbuild @@ -74,6 +74,7 @@ header-y += bpf_common.h header-y += bpf.h header-y += bpqether.h header-y += bsg.h +header-y += bt-bmc.h header-y += btrfs.h header-y += can.h header-y += capability.h diff --git a/include/uapi/linux/bt-bmc.h b/include/uapi/linux/bt-bmc.h new file mode 100644 index 000000000000..d9ec766a63d0 --- /dev/null +++ b/include/uapi/linux/bt-bmc.h @@ -0,0 +1,18 @@ +/* + * Copyright (c) 2015-2016, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _UAPI_LINUX_BT_BMC_H +#define _UAPI_LINUX_BT_BMC_H + +#include + +#define __BT_BMC_IOCTL_MAGIC 0xb1 +#define BT_BMC_IOCTL_SMS_ATN _IO(__BT_BMC_IOCTL_MAGIC, 0x00) + +#endif /* _UAPI_LINUX_BT_BMC_H */ -- cgit v1.2.3 From 1a377a79211a08c5c8a05c0b6dee6d5b13ef4107 Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Wed, 21 Sep 2016 19:35:53 +0930 Subject: ipmi: Fix ioremap error handling in bt-bmc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit devm_ioremap_resource returns ERR_PTR so we can't check for NULL. Signed-off-by: Joel Stanley Acked-by: Cédric Le Goater Signed-off-by: Corey Minyard --- drivers/char/ipmi/bt-bmc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/char/ipmi/bt-bmc.c b/drivers/char/ipmi/bt-bmc.c index 2e880bf0be26..de64bf1f2f4d 100644 --- a/drivers/char/ipmi/bt-bmc.c +++ b/drivers/char/ipmi/bt-bmc.c @@ -438,8 +438,8 @@ static int bt_bmc_probe(struct platform_device *pdev) } bt_bmc->base = devm_ioremap_resource(&pdev->dev, res); - if (!bt_bmc->base) - return -ENOMEM; + if (IS_ERR(bt_bmc->base)) + return PTR_ERR(bt_bmc->base); mutex_init(&bt_bmc->mutex); init_waitqueue_head(&bt_bmc->queue); -- cgit v1.2.3 From a3e6061bad6292f2d5be3c1c4ccf1fa136517dec Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?C=C3=A9dric=20Le=20Goater?= Date: Wed, 21 Sep 2016 12:24:34 +0200 Subject: ipmi/bt-bmc: add a dependency on ARCH_ASPEED MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Cédric Le Goater Signed-off-by: Corey Minyard --- drivers/char/ipmi/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/char/ipmi/Kconfig b/drivers/char/ipmi/Kconfig index 2c234e3e7513..7f816655cbbf 100644 --- a/drivers/char/ipmi/Kconfig +++ b/drivers/char/ipmi/Kconfig @@ -78,6 +78,7 @@ config IPMI_POWEROFF endif # IPMI_HANDLER config ASPEED_BT_IPMI_BMC + depends on ARCH_ASPEED tristate "BT IPMI bmc driver" help Provides a driver for the BT (Block Transfer) IPMI interface -- cgit v1.2.3 From d94655b405ba08838fb3db301dddb02a435ae16c Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sat, 24 Sep 2016 12:02:54 +0000 Subject: ipmi/bt-bmc: remove redundant return value check of platform_get_resource() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Remove unneeded error handling on the result of a call to platform_get_resource() when the value is passed to devm_ioremap_resource(). Signed-off-by: Wei Yongjun Acked-by: Cédric Le Goater Signed-off-by: Corey Minyard --- drivers/char/ipmi/bt-bmc.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/char/ipmi/bt-bmc.c b/drivers/char/ipmi/bt-bmc.c index de64bf1f2f4d..b49e61320952 100644 --- a/drivers/char/ipmi/bt-bmc.c +++ b/drivers/char/ipmi/bt-bmc.c @@ -432,11 +432,6 @@ static int bt_bmc_probe(struct platform_device *pdev) dev_set_drvdata(&pdev->dev, bt_bmc); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "Unable to find resources\n"); - return -ENXIO; - } - bt_bmc->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(bt_bmc->base)) return PTR_ERR(bt_bmc->base); -- cgit v1.2.3 From bd85f4b37ddf2da22ccf5b29d264b2459b6722df Mon Sep 17 00:00:00 2001 From: Xie XiuQi Date: Tue, 27 Sep 2016 15:07:12 +0800 Subject: ipmi: fix crash on reading version from proc after unregisted bmc I meet a crash, which could be reproduce: 1) while true; do cat /proc/ipmi/0/version; done 2) modprobe -rv ipmi_si ipmi_msghandler ipmi_devintf [82761.021137] IPMI BT: req2rsp=5 secs retries=2 [82761.034524] ipmi device interface [82761.222218] ipmi_si ipmi_si.0: Found new BMC (man_id: 0x0007db, prod_id: 0x0001, dev_id: 0x01) [82761.222230] ipmi_si ipmi_si.0: IPMI bt interface initialized [82903.922740] BUG: unable to handle kernel NULL pointer dereference at 00000000000002d4 [82903.930952] IP: [] smi_version_proc_show+0x18/0x40 [ipmi_msghandler] [82903.939220] PGD 86693a067 PUD 865304067 PMD 0 [82903.943893] Thread overran stack, or stack corrupted [82903.949034] Oops: 0000 [#1] SMP [82903.983091] Modules linked in: ipmi_si(-) ipmi_msghandler binfmt_misc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ... [82904.057285] pps_core scsi_transport_sas dm_mod vfio_iommu_type1 vfio xt_sctp nf_conntrack_proto_sctp nf_nat_proto_sctp nf_nat nf_conntrack sctp libcrc32c [last unloaded: ipmi_devintf] [82904.073169] CPU: 37 PID: 28089 Comm: cat Tainted: GF O ---- ------- 3.10.0-327.28.3.el7.x86_64 #1 [82904.083373] Hardware name: Huawei RH2288H V3/BC11HGSA0, BIOS 3.22 05/16/2016 [82904.090592] task: ffff880101cc2e00 ti: ffff880369c54000 task.ti: ffff880369c54000 [82904.098414] RIP: 0010:[] [] smi_version_proc_show+0x18/0x40 [ipmi_msghandler] [82904.109124] RSP: 0018:ffff880369c57e70 EFLAGS: 00010203 [82904.114608] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000024688470 [82904.121912] RDX: fffffffffffffff4 RSI: ffffffffa0313404 RDI: ffff8808670ce200 [82904.129218] RBP: ffff880369c57e70 R08: 0000000000019720 R09: ffffffff81204a27 [82904.136521] R10: ffff88046f803300 R11: 0000000000000246 R12: ffff880662399700 [82904.143828] R13: 0000000000000001 R14: ffff880369c57f48 R15: ffff8808670ce200 [82904.151128] FS: 00007fb70c9ca740(0000) GS:ffff88086e340000(0000) knlGS:0000000000000000 [82904.159557] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [82904.165473] CR2: 00000000000002d4 CR3: 0000000864c0c000 CR4: 00000000003407e0 [82904.172778] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [82904.180084] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [82904.187385] Stack: [82904.189573] ffff880369c57ee0 ffffffff81204f1a 00000000122a2427 0000000001426000 [82904.197392] ffff8808670ce238 0000000000010000 0000000000000000 0000000000000fff [82904.205198] 00000000122a2427 ffff880862079600 0000000001426000 ffff880369c57f48 [82904.212962] Call Trace: [82904.219667] [] seq_read+0xfa/0x3a0 [82904.224893] [] proc_reg_read+0x3d/0x80 [82904.230468] [] vfs_read+0x9c/0x170 [82904.235689] [] SyS_read+0x7f/0xe0 [82904.240816] [] system_call_fastpath+0x16/0x1b [82904.246991] Code: 30 a0 e8 0c 6f ef e0 5b 5d c3 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 47 78 55 48 c7 c6 04 34 31 a0 48 89 e5 48 8b 40 50 <0f> b6 90 d4 02 00 00 31 c0 89 d1 83 e2 0f c0 e9 04 0f b6 c9 e8 [82904.267710] RIP [] smi_version_proc_show+0x18/0x40 [ipmi_msghandler] [82904.276079] RSP [82904.279734] CR2: 00000000000002d4 [82904.283731] ---[ end trace a69e4328b49dd7c4 ]--- [82904.328118] Kernel panic - not syncing: Fatal exception Reading versin from /proc need bmc device struct available. So in this patch we move add/remove_proc_entries between ipmi_bmc_register and ipmi_bmc_unregister. Cc: Kefeng Wang Signed-off-by: Xie XiuQi Signed-off-by: Corey Minyard --- drivers/char/ipmi/ipmi_msghandler.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index d8619998cfb5..fcdd886819f5 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -2891,11 +2891,11 @@ int ipmi_register_smi(const struct ipmi_smi_handlers *handlers, intf->curr_channel = IPMI_MAX_CHANNELS; } + rv = ipmi_bmc_register(intf, i); + if (rv == 0) rv = add_proc_entries(intf, i); - rv = ipmi_bmc_register(intf, i); - out: if (rv) { if (intf->proc_dir) @@ -2982,8 +2982,6 @@ int ipmi_unregister_smi(ipmi_smi_t intf) int intf_num = intf->intf_num; ipmi_user_t user; - ipmi_bmc_unregister(intf); - mutex_lock(&smi_watchers_mutex); mutex_lock(&ipmi_interfaces_mutex); intf->intf_num = -1; @@ -3007,6 +3005,7 @@ int ipmi_unregister_smi(ipmi_smi_t intf) mutex_unlock(&ipmi_interfaces_mutex); remove_proc_entries(intf); + ipmi_bmc_unregister(intf); /* * Call all the watcher interfaces to tell them that -- cgit v1.2.3