From 51a0d036f995585e8c5c30797d5bce28645d9dd7 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 21 Nov 2013 14:32:04 -0800 Subject: ARM: drivers/rtc/rtc-at91rm9200.c: disable interrupts at shutdown Make sure RTC-interrupts are disabled at shutdown. As the RTC is generally powered by backup power (VDDBU), its interrupts are not disabled on wake-up, user, watchdog or software reset. This could cause troubles on other systems (e.g. older kernels) if an interrupt occurs before a handler has been installed at next boot. Let us be well-behaved and disable them on clean shutdowns at least (as do the RTT-based rtc-at91sam9 driver). Signed-off-by: Johan Hovold Acked-by: Nicolas Ferre Cc: Jean-Christophe Plagniol-Villard Cc: Andrew Victor Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-at91rm9200.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c index 8b2cd8a5a2ff..c0da95e95702 100644 --- a/drivers/rtc/rtc-at91rm9200.c +++ b/drivers/rtc/rtc-at91rm9200.c @@ -428,6 +428,14 @@ static int __exit at91_rtc_remove(struct platform_device *pdev) return 0; } +static void at91_rtc_shutdown(struct platform_device *pdev) +{ + /* Disable all interrupts */ + at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM | + AT91_RTC_SECEV | AT91_RTC_TIMEV | + AT91_RTC_CALEV); +} + #ifdef CONFIG_PM_SLEEP /* AT91RM9200 RTC Power management control */ @@ -466,6 +474,7 @@ static SIMPLE_DEV_PM_OPS(at91_rtc_pm_ops, at91_rtc_suspend, at91_rtc_resume); static struct platform_driver at91_rtc_driver = { .remove = __exit_p(at91_rtc_remove), + .shutdown = at91_rtc_shutdown, .driver = { .name = "at91_rtc", .owner = THIS_MODULE, -- cgit v1.2.3