From 514820eb982eb85677ed2ecef9710e90e24fbdab Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 8 Jun 2011 18:51:32 +0900 Subject: serial: sh-sci: Consolidate RXD pin handling. Non-SCI parts do not have the special port reg necessary for cases where the RX and SCI pins are muxed and need to be manually polled, so these like always fall back on the normal FIFO processing paths. SH7760 is in a class in and of itself with regards to mapping its SIM card interface via the SCI port class despite not having any of the RXD lines wired up and so implicitly behaving more like a SCIF in this regard. Out of the other CPUs, some support the port check via the same block while others do it through an external SuperI/O, so it's not even possible to perform the check relative to the ioremapped cookie offset, so the separate read semantics are preserved here, too. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh3/setup-sh770x.c | 1 + arch/sh/kernel/cpu/sh4/setup-sh7750.c | 1 + drivers/tty/serial/sh-sci.c | 13 +++++++++++++ drivers/tty/serial/sh-sci.h | 29 ----------------------------- include/linux/serial_sci.h | 2 ++ 5 files changed, 17 insertions(+), 29 deletions(-) diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c index 4551ad647c2c..6d549792f791 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -108,6 +108,7 @@ static struct platform_device rtc_device = { static struct plat_sci_port scif0_platform_data = { .mapbase = 0xfffffe80, + .port_reg = 0xa4000136, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_TE | SCSCR_RE, .scbrr_algo_id = SCBRR_ALGO_2, diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index e53b4b38bd11..8ea26e791187 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -38,6 +38,7 @@ static struct platform_device rtc_device = { static struct plat_sci_port sci_platform_data = { .mapbase = 0xffe00000, + .port_reg = 0xffe0001C .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_TE | SCSCR_RE, .scbrr_algo_id = SCBRR_ALGO_2, diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index bb27885ea2e5..3248ddaa889d 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -363,6 +363,19 @@ static int sci_rxfill(struct uart_port *port) return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0; } +/* + * SCI helper for checking the state of the muxed port/RXD pins. + */ +static inline int sci_rxd_in(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + + if (s->cfg->port_reg <= 0) + return 1; + + return !!__raw_readb(s->cfg->port_reg); +} + /* ********************************************************************** * * the interrupt related routines * * ********************************************************************** */ diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h index caab353a98b5..1c20f7f9ba4f 100644 --- a/drivers/tty/serial/sh-sci.h +++ b/drivers/tty/serial/sh-sci.h @@ -287,32 +287,3 @@ SCIF_FNS(SCLSR, 0, 0, 0x24, 16) #endif #define sci_in(port, reg) sci_##reg##_in(port) #define sci_out(port, reg, value) sci_##reg##_out(port, value) - -#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ - defined(CONFIG_CPU_SUBTYPE_SH7707) || \ - defined(CONFIG_CPU_SUBTYPE_SH7708) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xfffffe80) - return __raw_readb(SCPDR)&0x01 ? 1 : 0; /* SCI */ - return 1; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ - defined(CONFIG_CPU_SUBTYPE_SH7091) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xffe00000) - return __raw_readb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */ - return 1; -} -#else /* default case for non-SCI processors */ -static inline int sci_rxd_in(struct uart_port *port) -{ - return 1; -} -#endif diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 5fac3bccfd87..ecefec7c0b67 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -86,6 +86,8 @@ struct plat_sci_port { int overrun_bit; unsigned int error_mask; + int port_reg; + struct device *dma_dev; unsigned int dma_slave_tx; -- cgit v1.2.3