From ddc25bdd2b7f34667111714fafc9c04f6ad97fee Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Wed, 7 Jan 2015 13:15:22 +0100 Subject: iio: dht11: Fix out-of-bounds read As we access i-1 we must not start with i=0. Signed-off-by: Richard Weinberger Acked-by: Hartmut Knaack Acked-by: Harald Geyer Reviewed-by: Sanjeev Sharma Signed-off-by: Jonathan Cameron --- drivers/iio/humidity/dht11.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/humidity/dht11.c b/drivers/iio/humidity/dht11.c index 623c145d8a97..f546ecae90f1 100644 --- a/drivers/iio/humidity/dht11.c +++ b/drivers/iio/humidity/dht11.c @@ -88,7 +88,7 @@ static int dht11_decode(struct dht11 *dht11, int offset) unsigned char temp_int, temp_dec, hum_int, hum_dec, checksum; /* Calculate timestamp resolution */ - for (i = 0; i < dht11->num_edges; ++i) { + for (i = 1; i < dht11->num_edges; ++i) { t = dht11->edges[i].ts - dht11->edges[i-1].ts; if (t > 0 && t < timeres) timeres = t; -- cgit v1.2.3 From 004bc530341a40536494431cf665504f8ee70266 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Wed, 7 Jan 2015 13:18:23 +0100 Subject: iio: dht11: Add locking Make sure that the read function is not interrupted... Signed-off-by: Richard Weinberger Acked-by: Harald Geyer Reviewed-by: Sanjeev Sharma Signed-off-by: Jonathan Cameron --- drivers/iio/humidity/dht11.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/iio/humidity/dht11.c b/drivers/iio/humidity/dht11.c index f546ecae90f1..7717f5c3395b 100644 --- a/drivers/iio/humidity/dht11.c +++ b/drivers/iio/humidity/dht11.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include @@ -57,6 +58,7 @@ struct dht11 { int irq; struct completion completion; + struct mutex lock; s64 timestamp; int temperature; @@ -145,6 +147,7 @@ static int dht11_read_raw(struct iio_dev *iio_dev, struct dht11 *dht11 = iio_priv(iio_dev); int ret; + mutex_lock(&dht11->lock); if (dht11->timestamp + DHT11_DATA_VALID_TIME < iio_get_time_ns()) { reinit_completion(&dht11->completion); @@ -185,6 +188,7 @@ static int dht11_read_raw(struct iio_dev *iio_dev, ret = -EINVAL; err: dht11->num_edges = -1; + mutex_unlock(&dht11->lock); return ret; } @@ -268,6 +272,7 @@ static int dht11_probe(struct platform_device *pdev) platform_set_drvdata(pdev, iio); init_completion(&dht11->completion); + mutex_init(&dht11->lock); iio->name = pdev->name; iio->dev.parent = &pdev->dev; iio->info = &dht11_iio_info; -- cgit v1.2.3 From 94e65519abde01cbffb9c538a4598f6a50bc86d1 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Wed, 7 Jan 2015 13:22:49 +0100 Subject: iio: dht11: IRQ fixes Since setting irq-enabled GPIOs into output state is not supported by all GPIO controllers, we need to disable the irq while requesting sensor data. As side effect we lose a tiny bit of functionality: Some wiring problems can't be concluded from log messages anymore. Signed-off-by: Richard Weinberger Signed-off-by: Harald Geyer Signed-off-by: Jonathan Cameron --- drivers/iio/humidity/dht11.c | 62 +++++++++++++++++++++++++------------------- 1 file changed, 35 insertions(+), 27 deletions(-) diff --git a/drivers/iio/humidity/dht11.c b/drivers/iio/humidity/dht11.c index 7717f5c3395b..7d79a1ac5f5f 100644 --- a/drivers/iio/humidity/dht11.c +++ b/drivers/iio/humidity/dht11.c @@ -40,8 +40,12 @@ #define DHT11_DATA_VALID_TIME 2000000000 /* 2s in ns */ -#define DHT11_EDGES_PREAMBLE 4 +#define DHT11_EDGES_PREAMBLE 2 #define DHT11_BITS_PER_READ 40 +/* + * Note that when reading the sensor actually 84 edges are detected, but + * since the last edge is not significant, we only store 83: + */ #define DHT11_EDGES_PER_READ (2*DHT11_BITS_PER_READ + DHT11_EDGES_PREAMBLE + 1) /* Data transmission timing (nano seconds) */ @@ -140,6 +144,27 @@ static int dht11_decode(struct dht11 *dht11, int offset) return 0; } +/* + * IRQ handler called on GPIO edges + */ +static irqreturn_t dht11_handle_irq(int irq, void *data) +{ + struct iio_dev *iio = data; + struct dht11 *dht11 = iio_priv(iio); + + /* TODO: Consider making the handler safe for IRQ sharing */ + if (dht11->num_edges < DHT11_EDGES_PER_READ && dht11->num_edges >= 0) { + dht11->edges[dht11->num_edges].ts = iio_get_time_ns(); + dht11->edges[dht11->num_edges++].value = + gpio_get_value(dht11->gpio); + + if (dht11->num_edges >= DHT11_EDGES_PER_READ) + complete(&dht11->completion); + } + + return IRQ_HANDLED; +} + static int dht11_read_raw(struct iio_dev *iio_dev, const struct iio_chan_spec *chan, int *val, int *val2, long m) @@ -160,8 +185,17 @@ static int dht11_read_raw(struct iio_dev *iio_dev, if (ret) goto err; + ret = request_irq(dht11->irq, dht11_handle_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + iio_dev->name, iio_dev); + if (ret) + goto err; + ret = wait_for_completion_killable_timeout(&dht11->completion, HZ); + + free_irq(dht11->irq, iio_dev); + if (ret == 0 && dht11->num_edges < DHT11_EDGES_PER_READ - 1) { dev_err(&iio_dev->dev, "Only %d signal edges detected\n", @@ -197,27 +231,6 @@ static const struct iio_info dht11_iio_info = { .read_raw = dht11_read_raw, }; -/* - * IRQ handler called on GPIO edges -*/ -static irqreturn_t dht11_handle_irq(int irq, void *data) -{ - struct iio_dev *iio = data; - struct dht11 *dht11 = iio_priv(iio); - - /* TODO: Consider making the handler safe for IRQ sharing */ - if (dht11->num_edges < DHT11_EDGES_PER_READ && dht11->num_edges >= 0) { - dht11->edges[dht11->num_edges].ts = iio_get_time_ns(); - dht11->edges[dht11->num_edges++].value = - gpio_get_value(dht11->gpio); - - if (dht11->num_edges >= DHT11_EDGES_PER_READ) - complete(&dht11->completion); - } - - return IRQ_HANDLED; -} - static const struct iio_chan_spec dht11_chan_spec[] = { { .type = IIO_TEMP, .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), }, @@ -260,11 +273,6 @@ static int dht11_probe(struct platform_device *pdev) dev_err(dev, "GPIO %d has no interrupt\n", dht11->gpio); return -EINVAL; } - ret = devm_request_irq(dev, dht11->irq, dht11_handle_irq, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - pdev->name, iio); - if (ret) - return ret; dht11->timestamp = iio_get_time_ns() - DHT11_DATA_VALID_TIME - 1; dht11->num_edges = -1; -- cgit v1.2.3 From f2229ab8611e6e79992b6357db3fb4faf70e74a9 Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Wed, 31 Dec 2014 03:59:46 -0500 Subject: iio: iadc: wait_for_completion_timeout time in jiffies The timeout value to wait_for_completion_timeout is in jiffies but the value being passed seems like it was intended to by microseconds Note that the timeout was extremely long thus it might be too short now. In any case it probably should be passed through usecs_to_jiffies() or msecs_to_jiffies() patch is against linux-next 3.19.0-rc1 -next-20141226 patch was only compile-tested x86_64_defcofnig + CONFIG_SPMI=m CONFIG_IIO=m, CONFIG_QCOM_SPMI_IADC=m Signed-off-by: Nicholas Mc Guire Acked-by: Ivan T. Ivanov Signed-off-by: Jonathan Cameron --- drivers/iio/adc/qcom-spmi-iadc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/iio/adc/qcom-spmi-iadc.c b/drivers/iio/adc/qcom-spmi-iadc.c index b9666f2f5e51..fabd24edc2a1 100644 --- a/drivers/iio/adc/qcom-spmi-iadc.c +++ b/drivers/iio/adc/qcom-spmi-iadc.c @@ -296,7 +296,8 @@ static int iadc_do_conversion(struct iadc_chip *iadc, int chan, u16 *data) if (iadc->poll_eoc) { ret = iadc_poll_wait_eoc(iadc, wait); } else { - ret = wait_for_completion_timeout(&iadc->complete, wait); + ret = wait_for_completion_timeout(&iadc->complete, + usecs_to_jiffies(wait)); if (!ret) ret = -ETIMEDOUT; else -- cgit v1.2.3 From 4f33fbae555000bf73aaacbc4f5b24668afc8c7a Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 9 Jan 2015 15:13:37 -0800 Subject: iio: imu: inv_mpu6050: Prevent dereferencing NULL When id is null, with ACPI enumeration, don't dereference it. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index b75519deac1a..eedd3e07d27c 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -690,7 +690,11 @@ static int inv_mpu_probe(struct i2c_client *client, i2c_set_clientdata(client, indio_dev); indio_dev->dev.parent = &client->dev; - indio_dev->name = id->name; + /* id will be NULL when enumerated via ACPI */ + if (id) + indio_dev->name = (char *)id->name; + else + indio_dev->name = (char *)dev_name(&client->dev); indio_dev->channels = inv_mpu_channels; indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels); -- cgit v1.2.3 From f81197b8a31b8fb287ae57f597b5b6841e1ece92 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Kristina=20Mart=C5=A1enko?= Date: Sun, 25 Jan 2015 18:28:19 +0200 Subject: iio: mxs-lradc: separate touchscreen and buffer virtual channels MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The touchscreen was initially designed [1] to map all of its physical channels to one virtual channel, leaving buffered capture to use the remaining 7 virtual channels. When the touchscreen was reimplemented [2], it was made to use four virtual channels, which overlap and conflict with the channels the buffer uses. As a result, when the buffer is enabled, the touchscreen's virtual channels are remapped to whichever physical channels the buffer was configured with, causing the touchscreen to read those instead of the touch measurement channels. Effectively the touchscreen stops working. So here we separate the channels again, giving the touchscreen 2 virtual channels and the buffer 6. We can't give the touchscreen just 1 channel as before, as the current pressure calculation requires 2 channels to be read at the same time. This makes the touchscreen continue to work during buffered capture. It has been tested on i.MX28, but not on i.MX23. [1] 06ddd353f5c8 ("iio: mxs: Implement support for touchscreen") [2] dee05308f602 ("Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection") Signed-off-by: Kristina Martšenko Reviewed-by: Marek Vasut Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/mxs-lradc.c | 166 ++++++++++++++++-------------------- 1 file changed, 75 insertions(+), 91 deletions(-) diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c index f053535385bf..4e574b76ead0 100644 --- a/drivers/staging/iio/adc/mxs-lradc.c +++ b/drivers/staging/iio/adc/mxs-lradc.c @@ -214,11 +214,14 @@ struct mxs_lradc { unsigned long is_divided; /* - * Touchscreen LRADC channels receives a private slot in the CTRL4 - * register, the slot #7. Therefore only 7 slots instead of 8 in the - * CTRL4 register can be mapped to LRADC channels when using the - * touchscreen. - * + * When the touchscreen is enabled, we give it two private virtual + * channels: #6 and #7. This means that only 6 virtual channels (instead + * of 8) will be available for buffered capture. + */ +#define TOUCHSCREEN_VCHANNEL1 7 +#define TOUCHSCREEN_VCHANNEL2 6 + + /* * Furthermore, certain LRADC channels are shared between touchscreen * and/or touch-buttons and generic LRADC block. Therefore when using * either of these, these channels are not available for the regular @@ -342,6 +345,9 @@ struct mxs_lradc { #define LRADC_CTRL4 0x140 #define LRADC_CTRL4_LRADCSELECT_MASK(n) (0xf << ((n) * 4)) #define LRADC_CTRL4_LRADCSELECT_OFFSET(n) ((n) * 4) +#define LRADC_CTRL4_LRADCSELECT(n, x) \ + (((x) << LRADC_CTRL4_LRADCSELECT_OFFSET(n)) & \ + LRADC_CTRL4_LRADCSELECT_MASK(n)) #define LRADC_RESOLUTION 12 #define LRADC_SINGLE_SAMPLE_MASK ((1 << LRADC_RESOLUTION) - 1) @@ -416,6 +422,14 @@ static bool mxs_lradc_check_touch_event(struct mxs_lradc *lradc) LRADC_STATUS_TOUCH_DETECT_RAW); } +static void mxs_lradc_map_channel(struct mxs_lradc *lradc, unsigned vch, + unsigned ch) +{ + mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(vch), + LRADC_CTRL4); + mxs_lradc_reg_set(lradc, LRADC_CTRL4_LRADCSELECT(vch, ch), LRADC_CTRL4); +} + static void mxs_lradc_setup_ts_channel(struct mxs_lradc *lradc, unsigned ch) { /* @@ -443,12 +457,8 @@ static void mxs_lradc_setup_ts_channel(struct mxs_lradc *lradc, unsigned ch) LRADC_DELAY_DELAY(lradc->over_sample_delay - 1), LRADC_DELAY(3)); - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(2) | - LRADC_CTRL1_LRADC_IRQ(3) | LRADC_CTRL1_LRADC_IRQ(4) | - LRADC_CTRL1_LRADC_IRQ(5), LRADC_CTRL1); + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch), LRADC_CTRL1); - /* wake us again, when the complete conversion is done */ - mxs_lradc_reg_set(lradc, LRADC_CTRL1_LRADC_IRQ_EN(ch), LRADC_CTRL1); /* * after changing the touchscreen plates setting * the signals need some initial time to settle. Start the @@ -502,12 +512,8 @@ static void mxs_lradc_setup_ts_pressure(struct mxs_lradc *lradc, unsigned ch1, LRADC_DELAY_DELAY(lradc->over_sample_delay - 1), LRADC_DELAY(3)); - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(2) | - LRADC_CTRL1_LRADC_IRQ(3) | LRADC_CTRL1_LRADC_IRQ(4) | - LRADC_CTRL1_LRADC_IRQ(5), LRADC_CTRL1); + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch2), LRADC_CTRL1); - /* wake us again, when the conversions are done */ - mxs_lradc_reg_set(lradc, LRADC_CTRL1_LRADC_IRQ_EN(ch2), LRADC_CTRL1); /* * after changing the touchscreen plates setting * the signals need some initial time to settle. Start the @@ -573,36 +579,6 @@ static unsigned mxs_lradc_read_ts_pressure(struct mxs_lradc *lradc, #define TS_CH_XM 4 #define TS_CH_YM 5 -static int mxs_lradc_read_ts_channel(struct mxs_lradc *lradc) -{ - u32 reg; - int val; - - reg = readl(lradc->base + LRADC_CTRL1); - - /* only channels 3 to 5 are of interest here */ - if (reg & LRADC_CTRL1_LRADC_IRQ(TS_CH_YP)) { - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(TS_CH_YP) | - LRADC_CTRL1_LRADC_IRQ(TS_CH_YP), LRADC_CTRL1); - val = mxs_lradc_read_raw_channel(lradc, TS_CH_YP); - } else if (reg & LRADC_CTRL1_LRADC_IRQ(TS_CH_XM)) { - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(TS_CH_XM) | - LRADC_CTRL1_LRADC_IRQ(TS_CH_XM), LRADC_CTRL1); - val = mxs_lradc_read_raw_channel(lradc, TS_CH_XM); - } else if (reg & LRADC_CTRL1_LRADC_IRQ(TS_CH_YM)) { - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(TS_CH_YM) | - LRADC_CTRL1_LRADC_IRQ(TS_CH_YM), LRADC_CTRL1); - val = mxs_lradc_read_raw_channel(lradc, TS_CH_YM); - } else { - return -EIO; - } - - mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2)); - mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3)); - - return val; -} - /* * YP(open)--+-------------+ * | |--+ @@ -646,7 +622,8 @@ static void mxs_lradc_prepare_x_pos(struct mxs_lradc *lradc) mxs_lradc_reg_set(lradc, mxs_lradc_drive_x_plate(lradc), LRADC_CTRL0); lradc->cur_plate = LRADC_SAMPLE_X; - mxs_lradc_setup_ts_channel(lradc, TS_CH_YP); + mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YP); + mxs_lradc_setup_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1); } /* @@ -667,7 +644,8 @@ static void mxs_lradc_prepare_y_pos(struct mxs_lradc *lradc) mxs_lradc_reg_set(lradc, mxs_lradc_drive_y_plate(lradc), LRADC_CTRL0); lradc->cur_plate = LRADC_SAMPLE_Y; - mxs_lradc_setup_ts_channel(lradc, TS_CH_XM); + mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_XM); + mxs_lradc_setup_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1); } /* @@ -688,7 +666,10 @@ static void mxs_lradc_prepare_pressure(struct mxs_lradc *lradc) mxs_lradc_reg_set(lradc, mxs_lradc_drive_pressure(lradc), LRADC_CTRL0); lradc->cur_plate = LRADC_SAMPLE_PRESSURE; - mxs_lradc_setup_ts_pressure(lradc, TS_CH_XP, TS_CH_YM); + mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YM); + mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL2, TS_CH_XP); + mxs_lradc_setup_ts_pressure(lradc, TOUCHSCREEN_VCHANNEL2, + TOUCHSCREEN_VCHANNEL1); } static void mxs_lradc_enable_touch_detection(struct mxs_lradc *lradc) @@ -701,6 +682,19 @@ static void mxs_lradc_enable_touch_detection(struct mxs_lradc *lradc) mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); } +static void mxs_lradc_start_touch_event(struct mxs_lradc *lradc) +{ + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, + LRADC_CTRL1); + mxs_lradc_reg_set(lradc, + LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1), LRADC_CTRL1); + /* + * start with the Y-pos, because it uses nearly the same plate + * settings like the touch detection + */ + mxs_lradc_prepare_y_pos(lradc); +} + static void mxs_lradc_report_ts_event(struct mxs_lradc *lradc) { input_report_abs(lradc->ts_input, ABS_X, lradc->ts_x_pos); @@ -718,10 +712,12 @@ static void mxs_lradc_complete_touch_event(struct mxs_lradc *lradc) * start a dummy conversion to burn time to settle the signals * note: we are not interested in the conversion's value */ - mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(5)); - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(5), LRADC_CTRL1); - mxs_lradc_reg_set(lradc, LRADC_CTRL1_LRADC_IRQ_EN(5), LRADC_CTRL1); - mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(1 << 5) | + mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(TOUCHSCREEN_VCHANNEL1)); + mxs_lradc_reg_clear(lradc, + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) | + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2), LRADC_CTRL1); + mxs_lradc_reg_wrt(lradc, + LRADC_DELAY_TRIGGER(1 << TOUCHSCREEN_VCHANNEL1) | LRADC_DELAY_KICK | LRADC_DELAY_DELAY(10), /* waste 5 ms */ LRADC_DELAY(2)); } @@ -753,59 +749,45 @@ static void mxs_lradc_finish_touch_event(struct mxs_lradc *lradc, bool valid) /* if it is released, wait for the next touch via IRQ */ lradc->cur_plate = LRADC_TOUCH; - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ, LRADC_CTRL1); + mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2)); + mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3)); + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ | + LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) | + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1), LRADC_CTRL1); mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); } /* touchscreen's state machine */ static void mxs_lradc_handle_touch(struct mxs_lradc *lradc) { - int val; - switch (lradc->cur_plate) { case LRADC_TOUCH: - /* - * start with the Y-pos, because it uses nearly the same plate - * settings like the touch detection - */ - if (mxs_lradc_check_touch_event(lradc)) { - mxs_lradc_reg_clear(lradc, - LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, - LRADC_CTRL1); - mxs_lradc_prepare_y_pos(lradc); - } + if (mxs_lradc_check_touch_event(lradc)) + mxs_lradc_start_touch_event(lradc); mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ, LRADC_CTRL1); return; case LRADC_SAMPLE_Y: - val = mxs_lradc_read_ts_channel(lradc); - if (val < 0) { - mxs_lradc_enable_touch_detection(lradc); /* re-start */ - return; - } - lradc->ts_y_pos = val; + lradc->ts_y_pos = mxs_lradc_read_raw_channel(lradc, + TOUCHSCREEN_VCHANNEL1); mxs_lradc_prepare_x_pos(lradc); return; case LRADC_SAMPLE_X: - val = mxs_lradc_read_ts_channel(lradc); - if (val < 0) { - mxs_lradc_enable_touch_detection(lradc); /* re-start */ - return; - } - lradc->ts_x_pos = val; + lradc->ts_x_pos = mxs_lradc_read_raw_channel(lradc, + TOUCHSCREEN_VCHANNEL1); mxs_lradc_prepare_pressure(lradc); return; case LRADC_SAMPLE_PRESSURE: - lradc->ts_pressure = - mxs_lradc_read_ts_pressure(lradc, TS_CH_XP, TS_CH_YM); + lradc->ts_pressure = mxs_lradc_read_ts_pressure(lradc, + TOUCHSCREEN_VCHANNEL2, + TOUCHSCREEN_VCHANNEL1); mxs_lradc_complete_touch_event(lradc); return; case LRADC_SAMPLE_VALID: - val = mxs_lradc_read_ts_channel(lradc); /* ignore the value */ mxs_lradc_finish_touch_event(lradc, 1); break; } @@ -1083,9 +1065,8 @@ static void mxs_lradc_disable_ts(struct mxs_lradc *lradc) { /* stop all interrupts from firing */ mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN | - LRADC_CTRL1_LRADC_IRQ_EN(2) | LRADC_CTRL1_LRADC_IRQ_EN(3) | - LRADC_CTRL1_LRADC_IRQ_EN(4) | LRADC_CTRL1_LRADC_IRQ_EN(5), - LRADC_CTRL1); + LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) | + LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL2), LRADC_CTRL1); /* Power-down touchscreen touch-detect circuitry. */ mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); @@ -1151,26 +1132,29 @@ static irqreturn_t mxs_lradc_handle_irq(int irq, void *data) struct iio_dev *iio = data; struct mxs_lradc *lradc = iio_priv(iio); unsigned long reg = readl(lradc->base + LRADC_CTRL1); + uint32_t clr_irq = mxs_lradc_irq_mask(lradc); const uint32_t ts_irq_mask = LRADC_CTRL1_TOUCH_DETECT_IRQ | - LRADC_CTRL1_LRADC_IRQ(2) | - LRADC_CTRL1_LRADC_IRQ(3) | - LRADC_CTRL1_LRADC_IRQ(4) | - LRADC_CTRL1_LRADC_IRQ(5); + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) | + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2); if (!(reg & mxs_lradc_irq_mask(lradc))) return IRQ_NONE; - if (lradc->use_touchscreen && (reg & ts_irq_mask)) + if (lradc->use_touchscreen && (reg & ts_irq_mask)) { mxs_lradc_handle_touch(lradc); + /* Make sure we don't clear the next conversion's interrupt. */ + clr_irq &= ~(LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) | + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2)); + } + if (iio_buffer_enabled(iio)) iio_trigger_poll(iio->trig); else if (reg & LRADC_CTRL1_LRADC_IRQ(0)) complete(&lradc->completion); - mxs_lradc_reg_clear(lradc, reg & mxs_lradc_irq_mask(lradc), - LRADC_CTRL1); + mxs_lradc_reg_clear(lradc, reg & clr_irq, LRADC_CTRL1); return IRQ_HANDLED; } @@ -1346,7 +1330,7 @@ static bool mxs_lradc_validate_scan_mask(struct iio_dev *iio, if (lradc->use_touchbutton) rsvd_chans++; if (lradc->use_touchscreen) - rsvd_chans++; + rsvd_chans += 2; /* Test for attempts to map channels with special mode of operation. */ if (bitmap_intersects(mask, &rsvd_mask, LRADC_MAX_TOTAL_CHANS)) -- cgit v1.2.3 From 86bf7f3ef7e961e91e16dceb31ae0f583483b204 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Kristina=20Mart=C5=A1enko?= Date: Sun, 25 Jan 2015 18:28:20 +0200 Subject: iio: mxs-lradc: make ADC reads not disable touchscreen interrupts MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reading a channel through sysfs, or starting a buffered capture, will currently turn off the touchscreen. This is because the read_raw() and buffer preenable()/postdisable() callbacks disable interrupts for all LRADC channels, including those the touchscreen uses. So make the callbacks only disable interrupts for the channels they use. This means channel 0 for read_raw() and channels 0-5 for the buffer (if the touchscreen is enabled). Since the touchscreen uses different channels (6 and 7), it no longer gets turned off. Note that only i.MX28 is affected by this issue, i.MX23 should be fine. Signed-off-by: Kristina Martšenko Reviewed-by: Marek Vasut Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/mxs-lradc.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c index 4e574b76ead0..653af03bc69d 100644 --- a/drivers/staging/iio/adc/mxs-lradc.c +++ b/drivers/staging/iio/adc/mxs-lradc.c @@ -220,6 +220,9 @@ struct mxs_lradc { */ #define TOUCHSCREEN_VCHANNEL1 7 #define TOUCHSCREEN_VCHANNEL2 6 +#define BUFFER_VCHANS_LIMITED 0x3f +#define BUFFER_VCHANS_ALL 0xff + u8 buffer_vchans; /* * Furthermore, certain LRADC channels are shared between touchscreen @@ -819,7 +822,7 @@ static int mxs_lradc_read_single(struct iio_dev *iio_dev, int chan, int *val) * used if doing raw sampling. */ if (lradc->soc == IMX28_LRADC) - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK, + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), LRADC_CTRL1); mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0); @@ -1266,8 +1269,9 @@ static int mxs_lradc_buffer_preenable(struct iio_dev *iio) } if (lradc->soc == IMX28_LRADC) - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK, - LRADC_CTRL1); + mxs_lradc_reg_clear(lradc, + lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET, + LRADC_CTRL1); mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0); for_each_set_bit(chan, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) { @@ -1303,8 +1307,9 @@ static int mxs_lradc_buffer_postdisable(struct iio_dev *iio) mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0); if (lradc->soc == IMX28_LRADC) - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK, - LRADC_CTRL1); + mxs_lradc_reg_clear(lradc, + lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET, + LRADC_CTRL1); kfree(lradc->buffer); mutex_unlock(&lradc->lock); @@ -1542,6 +1547,11 @@ static int mxs_lradc_probe(struct platform_device *pdev) touch_ret = mxs_lradc_probe_touchscreen(lradc, node); + if (touch_ret == 0) + lradc->buffer_vchans = BUFFER_VCHANS_LIMITED; + else + lradc->buffer_vchans = BUFFER_VCHANS_ALL; + /* Grab all IRQ sources */ for (i = 0; i < of_cfg->irq_count; i++) { lradc->irq[i] = platform_get_irq(pdev, i); -- cgit v1.2.3 From 6abe0300a1d5242f4ff89257197f284679af1a06 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Kristina=20Mart=C5=A1enko?= Date: Sun, 25 Jan 2015 18:28:21 +0200 Subject: iio: mxs-lradc: make ADC reads not unschedule touchscreen conversions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reading a channel through sysfs, or starting a buffered capture, can occasionally turn off the touchscreen. This is because the read_raw() and buffer preenable()/postdisable() callbacks unschedule current conversions on all channels. If a delay channel happens to schedule a touchscreen conversion at the same time, the conversion gets cancelled and the touchscreen sequence stops. This is probably related to this note from the reference manual: "If a delay group schedules channels to be sampled and a manual write to the schedule field in CTRL0 occurs while the block is discarding samples, the LRADC will switch to the new schedule and will not sample the channels that were previously scheduled. The time window for this to happen is very small and lasts only while the LRADC is discarding samples." So make the callbacks only unschedule conversions for the channels they use. This means channel 0 for read_raw() and channels 0-5 for the buffer (if the touchscreen is enabled). Since the touchscreen uses different channels (6 and 7), it no longer gets turned off. This is tested and fixes the issue on i.MX28, but hasn't been tested on i.MX23. Signed-off-by: Kristina Martšenko Reviewed-by: Marek Vasut Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/mxs-lradc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c index 653af03bc69d..d2e0c275bf4d 100644 --- a/drivers/staging/iio/adc/mxs-lradc.c +++ b/drivers/staging/iio/adc/mxs-lradc.c @@ -824,7 +824,7 @@ static int mxs_lradc_read_single(struct iio_dev *iio_dev, int chan, int *val) if (lradc->soc == IMX28_LRADC) mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), LRADC_CTRL1); - mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0); + mxs_lradc_reg_clear(lradc, 0x1, LRADC_CTRL0); /* Enable / disable the divider per requirement */ if (test_bit(chan, &lradc->is_divided)) @@ -1272,7 +1272,7 @@ static int mxs_lradc_buffer_preenable(struct iio_dev *iio) mxs_lradc_reg_clear(lradc, lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET, LRADC_CTRL1); - mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0); + mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0); for_each_set_bit(chan, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) { ctrl4_set |= chan << LRADC_CTRL4_LRADCSELECT_OFFSET(ofs); @@ -1305,7 +1305,7 @@ static int mxs_lradc_buffer_postdisable(struct iio_dev *iio) mxs_lradc_reg_clear(lradc, LRADC_DELAY_TRIGGER_LRADCS_MASK | LRADC_DELAY_KICK, LRADC_DELAY(0)); - mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0); + mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0); if (lradc->soc == IMX28_LRADC) mxs_lradc_reg_clear(lradc, lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET, -- cgit v1.2.3 From 89bb35e200bee745c539a96666e0792301ca40f1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Kristina=20Mart=C5=A1enko?= Date: Sun, 25 Jan 2015 18:28:22 +0200 Subject: iio: mxs-lradc: only update the buffer when its conversions have finished MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Using the touchscreen while running buffered capture results in the buffer reporting lots of wrong values, often just zeros. This is because we push readings to the buffer every time a touchscreen interrupt arrives, including when the buffer's own conversions have not yet finished. So let's only push to the buffer when its conversions are ready. Signed-off-by: Kristina Martšenko Reviewed-by: Marek Vasut Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/mxs-lradc.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c index d2e0c275bf4d..ebcbd12d48b9 100644 --- a/drivers/staging/iio/adc/mxs-lradc.c +++ b/drivers/staging/iio/adc/mxs-lradc.c @@ -1152,10 +1152,12 @@ static irqreturn_t mxs_lradc_handle_irq(int irq, void *data) LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2)); } - if (iio_buffer_enabled(iio)) - iio_trigger_poll(iio->trig); - else if (reg & LRADC_CTRL1_LRADC_IRQ(0)) + if (iio_buffer_enabled(iio)) { + if (reg & lradc->buffer_vchans) + iio_trigger_poll(iio->trig); + } else if (reg & LRADC_CTRL1_LRADC_IRQ(0)) { complete(&lradc->completion); + } mxs_lradc_reg_clear(lradc, reg & clr_irq, LRADC_CTRL1); -- cgit v1.2.3 From f7067a5ad717d4dbb4faa3ec56744152f6ba97ad Mon Sep 17 00:00:00 2001 From: Rasmus Villemoes Date: Fri, 23 Jan 2015 00:09:56 +0100 Subject: staging: iio: ad2s1200: Fix sign extension The line above makes vel a 12-bit quantity (st->rx[] is u8). The intention is to sign-extend vel using bit 11 as the sign bit. But because of C's promotion rules "vel = (vel << 4) >> 4;" is actually a no-op, since vel is promoted to int before the inner shift. sign_extend32 works equally well for 8 and 16 bits types, so use that. Signed-off-by: Rasmus Villemoes Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/resolver/ad2s1200.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/staging/iio/resolver/ad2s1200.c b/drivers/staging/iio/resolver/ad2s1200.c index 017d2f8379b7..c17893b4918c 100644 --- a/drivers/staging/iio/resolver/ad2s1200.c +++ b/drivers/staging/iio/resolver/ad2s1200.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -68,7 +69,7 @@ static int ad2s1200_read_raw(struct iio_dev *indio_dev, break; case IIO_ANGL_VEL: vel = (((s16)(st->rx[0])) << 4) | ((st->rx[1] & 0xF0) >> 4); - vel = (vel << 4) >> 4; + vel = sign_extend32(vel, 11); *val = vel; break; default: -- cgit v1.2.3 From 19e353f2b344ad86cea6ebbc0002e5f903480a90 Mon Sep 17 00:00:00 2001 From: Rasmus Villemoes Date: Fri, 23 Jan 2015 00:34:02 +0100 Subject: iio: imu: adis16400: Fix sign extension The intention is obviously to sign-extend a 12 bit quantity. But because of C's promotion rules, the assignment is equivalent to "val16 &= 0xfff;". Use the proper API for this. Signed-off-by: Rasmus Villemoes Acked-by: Lars-Peter Clausen Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/imu/adis16400_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/iio/imu/adis16400_core.c b/drivers/iio/imu/adis16400_core.c index b70873de04ea..fa795dcd5f75 100644 --- a/drivers/iio/imu/adis16400_core.c +++ b/drivers/iio/imu/adis16400_core.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -414,7 +415,7 @@ static int adis16400_read_raw(struct iio_dev *indio_dev, mutex_unlock(&indio_dev->mlock); if (ret) return ret; - val16 = ((val16 & 0xFFF) << 4) >> 4; + val16 = sign_extend32(val16, 11); *val = val16; return IIO_VAL_INT; case IIO_CHAN_INFO_OFFSET: -- cgit v1.2.3 From 03305e535cd5cdc1079b32909bf4b2dd67d46f7f Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sat, 3 Jan 2015 20:34:12 +0000 Subject: iio: mxs-lradc: fix iio channel map regression Since commit c8231a9af8147f8a ("iio: mxs-lradc: compute temperature from channel 8 and 9") with the removal of adc channel 9 there is no 1-1 mapping in the channel spec. All hwmon channel values above 9 are accessible via there index minus one. So add a hidden iio channel 9 to fix this issue. Signed-off-by: Stefan Wahren Acked-by: Alexandre Belloni Reviewed-by: Marek Vasut Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/mxs-lradc.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c index ebcbd12d48b9..351339ccaad6 100644 --- a/drivers/staging/iio/adc/mxs-lradc.c +++ b/drivers/staging/iio/adc/mxs-lradc.c @@ -1397,6 +1397,13 @@ static const struct iio_chan_spec mxs_lradc_chan_spec[] = { .channel = 8, .scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,}, }, + /* Hidden channel to keep indexes */ + { + .type = IIO_TEMP, + .indexed = 1, + .scan_index = -1, + .channel = 9, + }, MXS_ADC_CHAN(10, IIO_VOLTAGE), /* VDDIO */ MXS_ADC_CHAN(11, IIO_VOLTAGE), /* VTH */ MXS_ADC_CHAN(12, IIO_VOLTAGE), /* VDDA */ -- cgit v1.2.3 From 9e128ced3851d2802b6db870f6b2e93f449ce013 Mon Sep 17 00:00:00 2001 From: Angelo Compagnucci Date: Wed, 4 Feb 2015 15:14:26 +0100 Subject: iio:adc:mcp3422 Fix incorrect scales table This patch fixes uncorrect order of mcp3422_scales table, the values was erroneously transposed. It removes also an unused array and a wrong comment. Signed-off-by: Angelo Compagnucci Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/adc/mcp3422.c | 17 ++++------------- 1 file changed, 4 insertions(+), 13 deletions(-) diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c index 51672256072b..b96c636470ef 100644 --- a/drivers/iio/adc/mcp3422.c +++ b/drivers/iio/adc/mcp3422.c @@ -58,20 +58,11 @@ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ } -/* LSB is in nV to eliminate floating point */ -static const u32 rates_to_lsb[] = {1000000, 250000, 62500, 15625}; - -/* - * scales calculated as: - * rates_to_lsb[sample_rate] / (1 << pga); - * pga is 1 for 0, 2 - */ - static const int mcp3422_scales[4][4] = { - { 1000000, 250000, 62500, 15625 }, - { 500000 , 125000, 31250, 7812 }, - { 250000 , 62500 , 15625, 3906 }, - { 125000 , 31250 , 7812 , 1953 } }; + { 1000000, 500000, 250000, 125000 }, + { 250000 , 125000, 62500 , 31250 }, + { 62500 , 31250 , 15625 , 7812 }, + { 15625 , 7812 , 3906 , 1953 } }; /* Constant msleep times for data acquisitions */ static const int mcp3422_read_times[4] = { -- cgit v1.2.3 From da019f59cb16570e78feaf10380ac65a3a06861e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Urs=20F=C3=A4ssler?= Date: Mon, 2 Feb 2015 17:12:23 +0100 Subject: iio: ad5686: fix optional reference voltage declaration MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When not using the "_optional" function, a dummy regulator is returned and the driver fails to initialize. Signed-off-by: Urs Fässler Acked-by: Lars-Peter Clausen Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/dac/ad5686.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/dac/ad5686.c b/drivers/iio/dac/ad5686.c index f57562aa396f..15c73e20272d 100644 --- a/drivers/iio/dac/ad5686.c +++ b/drivers/iio/dac/ad5686.c @@ -322,7 +322,7 @@ static int ad5686_probe(struct spi_device *spi) st = iio_priv(indio_dev); spi_set_drvdata(spi, indio_dev); - st->reg = devm_regulator_get(&spi->dev, "vcc"); + st->reg = devm_regulator_get_optional(&spi->dev, "vcc"); if (!IS_ERR(st->reg)) { ret = regulator_enable(st->reg); if (ret) -- cgit v1.2.3 From 49e19d5f27aaa004692a2080453b9cc4d4fb6ec4 Mon Sep 17 00:00:00 2001 From: Roberta Dobrescu Date: Thu, 12 Feb 2015 23:00:14 +0200 Subject: iio: light: jsa1212: Select REGMAP_I2C This patch adds missing 'select' statement for jsa1212 driver. Without regmap_i2c, we get the following error when loading the module: Unknown symbol devm_regmap_init_i2c. Signed-off-by: Roberta Dobrescu Reviewed-by: Daniel Baluta Signed-off-by: Jonathan Cameron --- drivers/iio/light/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index ae68c64bdad3..e0ed374b33fd 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -126,6 +126,7 @@ config HID_SENSOR_PROX config JSA1212 tristate "JSA1212 ALS and proximity sensor driver" depends on I2C + select REGMAP_I2C help Say Y here if you want to build a IIO driver for JSA1212 proximity & ALS sensor device. -- cgit v1.2.3 From 8c3b3efb32e0fc5dc3c0a81c7f7639a14bebdb78 Mon Sep 17 00:00:00 2001 From: Roberta Dobrescu Date: Thu, 12 Feb 2015 23:00:15 +0200 Subject: iio: light: gp2ap020a00f: Select REGMAP_I2C This patch adds missing 'select' statement for gp2ap020a00f driver. Without regmap_i2c, we get the following error when loading the module: Unknown symbol devm_regmap_init_i2c. Signed-off-by: Roberta Dobrescu Reviewed-by: Daniel Baluta Signed-off-by: Jonathan Cameron --- drivers/iio/light/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index 5bea821adcae..a338089f8077 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -62,6 +62,7 @@ config CM36651 config GP2AP020A00F tristate "Sharp GP2AP020A00F Proximity/ALS sensor" depends on I2C + select REGMAP_I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER select IRQ_WORK -- cgit v1.2.3 From e765537add38cf7967efa11999bb5daf84a6517d Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sat, 14 Feb 2015 11:32:17 +0000 Subject: Revert "iio:humidity:si7020: fix pointer to i2c client" This reverts commit e0922e5e3ccb78aa0152e93dfbd1755ac39c8582. Requested by Andrey Smirnov. It incorrectly assumes that the level of indirection is not needed which is not true(probably because the driver incorrectly allocates sizeof(*client) instead of sizeof(*data) via devm_iio_device_alloc). If you look at the code of the probe function(see below) it is easy to see that what is being stored in the private memory of the IIO device instance is not a copy of a 'struct i2c_client' but a pointer to an instance passed as an argument to the probe function. struct i2c_client **data; int ret; < Some code skipped > indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*client)); if (!indio_dev) return -ENOMEM; data = iio_priv(indio_dev); *data = client; Without reverting this change any read of a raw value of this sensor leads to a kernel oops due to a NULL pointer de-reference on my hardware setup. Signed-off-by: Jonathan Cameron Cc: Stable@vger.kernel.org --- drivers/iio/humidity/si7020.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/humidity/si7020.c b/drivers/iio/humidity/si7020.c index b54164677b89..69e49f58a455 100644 --- a/drivers/iio/humidity/si7020.c +++ b/drivers/iio/humidity/si7020.c @@ -45,12 +45,12 @@ static int si7020_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { - struct i2c_client *client = iio_priv(indio_dev); + struct i2c_client **client = iio_priv(indio_dev); int ret; switch (mask) { case IIO_CHAN_INFO_RAW: - ret = i2c_smbus_read_word_data(client, + ret = i2c_smbus_read_word_data(*client, chan->type == IIO_TEMP ? SI7020CMD_TEMP_HOLD : SI7020CMD_RH_HOLD); -- cgit v1.2.3 From e01becbad300712a28f29b666e685536f45e83bc Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Thu, 12 Feb 2015 23:58:41 -0800 Subject: IIO: si7020: Allocate correct amount of memory in devm_iio_device_alloc Since only a pointer to struct i2c_client is stored in a private area of IIO device created by the driver there's no need to allocate sizeof(struct i2c_client) worth of storage. Pushed to stable as this is linked to the revert patch previously. Without this followup the original patch looks sensible. Signed-off-by: Andrey Smirnov Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/humidity/si7020.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/humidity/si7020.c b/drivers/iio/humidity/si7020.c index 69e49f58a455..fa3b809aff5e 100644 --- a/drivers/iio/humidity/si7020.c +++ b/drivers/iio/humidity/si7020.c @@ -126,7 +126,7 @@ static int si7020_probe(struct i2c_client *client, /* Wait the maximum power-up time after software reset. */ msleep(15); - indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*client)); + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!indio_dev) return -ENOMEM; -- cgit v1.2.3 From b841118ee6c0917004e7e763c4f6bf8eb10a6d93 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 18 Feb 2015 12:39:46 +0100 Subject: iio: common: ssp_sensors: Protect PM-only functions to kill warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_PM_SLEEP=n: drivers/iio/common/ssp_sensors/ssp_dev.c:644: warning: ‘ssp_suspend’ defined but not used drivers/iio/common/ssp_sensors/ssp_dev.c:669: warning: ‘ssp_resume’ defined but not used Protect the unused functions by #ifdef CONFIG_PM_SLEEP to fix this. Signed-off-by: Geert Uytterhoeven Acked-by: Karol Wrona Signed-off-by: Jonathan Cameron --- drivers/iio/common/ssp_sensors/ssp_dev.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/iio/common/ssp_sensors/ssp_dev.c b/drivers/iio/common/ssp_sensors/ssp_dev.c index 52d70435f5a1..55a90082a29b 100644 --- a/drivers/iio/common/ssp_sensors/ssp_dev.c +++ b/drivers/iio/common/ssp_sensors/ssp_dev.c @@ -640,6 +640,7 @@ static int ssp_remove(struct spi_device *spi) return 0; } +#ifdef CONFIG_PM_SLEEP static int ssp_suspend(struct device *dev) { int ret; @@ -688,6 +689,7 @@ static int ssp_resume(struct device *dev) return 0; } +#endif /* CONFIG_PM_SLEEP */ static const struct dev_pm_ops ssp_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(ssp_suspend, ssp_resume) -- cgit v1.2.3 From 3608688973e8c85fbcd9b7e72b90e224b8d01526 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 28 Jan 2015 14:58:44 +0100 Subject: iio: ak8975: fix AK09911 dependencies ak8975 depends on I2C and GPIOLIB, so any symbols that selects ak8975 must have the same dependency, or we get build errors: drivers/iio/magnetometer/ak8975.c: In function 'ak8975_who_i_am': drivers/iio/magnetometer/ak8975.c:393:2: error: implicit declaration of function 'i2c_smbus_read_i2c_block_data' [-Werror=implicit-function-declaration] ret = i2c_smbus_read_i2c_block_data(client, AK09912_REG_WIA1, ^ drivers/iio/magnetometer/ak8975.c: In function 'ak8975_set_mode': drivers/iio/magnetometer/ak8975.c:431:2: error: implicit declaration of function 'i2c_smbus_write_byte_data' [-Werror=implicit-function-declaration] ret = i2c_smbus_write_byte_data(data->client, Signed-off-by: Arnd Bergmann Fixes: 57e73a423b1e85 ("iio: ak8975: add ak09911 and ak09912 support") Signed-off-by: Jonathan Cameron --- drivers/iio/magnetometer/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig index 4c7a4c52dd06..a5d6de72c523 100644 --- a/drivers/iio/magnetometer/Kconfig +++ b/drivers/iio/magnetometer/Kconfig @@ -18,6 +18,8 @@ config AK8975 config AK09911 tristate "Asahi Kasei AK09911 3-axis Compass" + depends on I2C + depends on GPIOLIB select AK8975 help Deprecated: AK09911 is now supported by AK8975 driver. -- cgit v1.2.3 From 7e4f1e777814c6916b513b5dc90e030ee4e25f04 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Mon, 23 Feb 2015 13:22:44 -0700 Subject: staging: comedi: comedi_isadma: fix "stalled" detect in comedi_isadma_disable_on_sample() The "stalled" variable this function is used to detect if the DMA operation is stalled while trying to disable DMA on a full comedi sample. The reset of this variable should only occur when the remaining bytes of the DMA transfer does not equal the remaining bytes from the last check. Reported-by: coverity (CID 1271132) Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/comedi_isadma.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/staging/comedi/drivers/comedi_isadma.c b/drivers/staging/comedi/drivers/comedi_isadma.c index dbdea71d6b95..e856f01ca077 100644 --- a/drivers/staging/comedi/drivers/comedi_isadma.c +++ b/drivers/staging/comedi/drivers/comedi_isadma.c @@ -91,9 +91,10 @@ unsigned int comedi_isadma_disable_on_sample(unsigned int dma_chan, stalled++; if (stalled > 10) break; + } else { + residue = new_residue; + stalled = 0; } - residue = new_residue; - stalled = 0; } return residue; } -- cgit v1.2.3 From 981c1fe9ae20e5fb7c1ee7038efa03933e637925 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Mon, 23 Feb 2015 15:13:49 -0700 Subject: staging: comedi: vmk80xx: remove "firmware version" kernel messages During the attach of this driver a couple commands are sent to the hardware with usb_bulk_msg() to read the firmware version information. This information is then dumped as dev_info() kernel messages. Thee messages are just added noise and don't effect the operation of the driver. For simplicity, remove the messages as well as the then unused functions vmk80xx_read_eeprom() and vmk80xx_check_data_link(). This also fixes an issue reported by coverity about an out-of-bounds write in vmk80xx_read_eeprom(). Reported-by: coverity (CID 711413) Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/vmk80xx.c | 71 -------------------------------- 1 file changed, 71 deletions(-) diff --git a/drivers/staging/comedi/drivers/vmk80xx.c b/drivers/staging/comedi/drivers/vmk80xx.c index e37118321a27..a0906685e27f 100644 --- a/drivers/staging/comedi/drivers/vmk80xx.c +++ b/drivers/staging/comedi/drivers/vmk80xx.c @@ -103,11 +103,6 @@ enum vmk80xx_model { VMK8061_MODEL }; -struct firmware_version { - unsigned char ic3_vers[32]; /* USB-Controller */ - unsigned char ic6_vers[32]; /* CPU */ -}; - static const struct comedi_lrange vmk8061_range = { 2, { UNI_RANGE(5), @@ -156,68 +151,12 @@ static const struct vmk80xx_board vmk80xx_boardinfo[] = { struct vmk80xx_private { struct usb_endpoint_descriptor *ep_rx; struct usb_endpoint_descriptor *ep_tx; - struct firmware_version fw; struct semaphore limit_sem; unsigned char *usb_rx_buf; unsigned char *usb_tx_buf; enum vmk80xx_model model; }; -static int vmk80xx_check_data_link(struct comedi_device *dev) -{ - struct vmk80xx_private *devpriv = dev->private; - struct usb_device *usb = comedi_to_usb_dev(dev); - unsigned int tx_pipe; - unsigned int rx_pipe; - unsigned char tx[1]; - unsigned char rx[2]; - - tx_pipe = usb_sndbulkpipe(usb, 0x01); - rx_pipe = usb_rcvbulkpipe(usb, 0x81); - - tx[0] = VMK8061_CMD_RD_PWR_STAT; - - /* - * Check that IC6 (PIC16F871) is powered and - * running and the data link between IC3 and - * IC6 is working properly - */ - usb_bulk_msg(usb, tx_pipe, tx, 1, NULL, devpriv->ep_tx->bInterval); - usb_bulk_msg(usb, rx_pipe, rx, 2, NULL, HZ * 10); - - return (int)rx[1]; -} - -static void vmk80xx_read_eeprom(struct comedi_device *dev, int flag) -{ - struct vmk80xx_private *devpriv = dev->private; - struct usb_device *usb = comedi_to_usb_dev(dev); - unsigned int tx_pipe; - unsigned int rx_pipe; - unsigned char tx[1]; - unsigned char rx[64]; - int cnt; - - tx_pipe = usb_sndbulkpipe(usb, 0x01); - rx_pipe = usb_rcvbulkpipe(usb, 0x81); - - tx[0] = VMK8061_CMD_RD_VERSION; - - /* - * Read the firmware version info of IC3 and - * IC6 from the internal EEPROM of the IC - */ - usb_bulk_msg(usb, tx_pipe, tx, 1, NULL, devpriv->ep_tx->bInterval); - usb_bulk_msg(usb, rx_pipe, rx, 64, &cnt, HZ * 10); - - rx[cnt] = '\0'; - - if (flag & IC3_VERSION) - strncpy(devpriv->fw.ic3_vers, rx + 1, 24); - else /* IC6_VERSION */ - strncpy(devpriv->fw.ic6_vers, rx + 25, 24); -} - static void vmk80xx_do_bulk_msg(struct comedi_device *dev) { struct vmk80xx_private *devpriv = dev->private; @@ -878,16 +817,6 @@ static int vmk80xx_auto_attach(struct comedi_device *dev, usb_set_intfdata(intf, devpriv); - if (devpriv->model == VMK8061_MODEL) { - vmk80xx_read_eeprom(dev, IC3_VERSION); - dev_info(&intf->dev, "%s\n", devpriv->fw.ic3_vers); - - if (vmk80xx_check_data_link(dev)) { - vmk80xx_read_eeprom(dev, IC6_VERSION); - dev_info(&intf->dev, "%s\n", devpriv->fw.ic6_vers); - } - } - if (devpriv->model == VMK8055_MODEL) vmk80xx_reset_device(dev); -- cgit v1.2.3 From abe46b8932dd9a6dfc3698e3eb121809b7b9ed28 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Fri, 27 Feb 2015 16:04:42 +0000 Subject: staging: comedi: adv_pci1710: fix AI INSN_READ for non-zero channel Reading of analog input channels by the `INSN_READ` comedi instruction is broken for all except channel 0. `pci171x_ai_insn_read()` calls `pci171x_ai_read_sample()` with the wrong value for the third parameter. It is supposed to be the current index in a channel list (which is always of length 1 in this case, so the index should be 0), but instead it is passing the actual channel number. `pci171x_ai_read_sample()` checks the channel number encoded in the raw sample value read from the hardware matches the channel number stored in the specified index of the previously set up channel list and returns `-ENODATA` if it doesn't match. Since the index should always be 0 in this case, the match will fail unless the channel number is also 0. Fix it by passing 0 as the channel index. Note that when the bug first appeared, it was `pci171x_ai_dropout()` that was called with the wrong parameter value. `pci171x_ai_dropout()` got replaced with `pci171x_ai_read_sample()` in commit 7fd2dae2500d ("staging: comedi: adv_pci1710: introduce pci171x_ai_read_sample()"). Fixes: 16c7eb6047bb ("staging: comedi: adv_pci1710: always enable PCI171x_PARANOIDCHECK code") Signed-off-by: Ian Abbott Cc: stable # 3.16+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/adv_pci1710.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c b/drivers/staging/comedi/drivers/adv_pci1710.c index 9800c01e6fb9..3f72451d2de0 100644 --- a/drivers/staging/comedi/drivers/adv_pci1710.c +++ b/drivers/staging/comedi/drivers/adv_pci1710.c @@ -426,7 +426,6 @@ static int pci171x_ai_insn_read(struct comedi_device *dev, unsigned int *data) { struct pci1710_private *devpriv = dev->private; - unsigned int chan = CR_CHAN(insn->chanspec); int ret = 0; int i; @@ -447,7 +446,7 @@ static int pci171x_ai_insn_read(struct comedi_device *dev, if (ret) break; - ret = pci171x_ai_read_sample(dev, s, chan, &val); + ret = pci171x_ai_read_sample(dev, s, 0, &val); if (ret) break; -- cgit v1.2.3