From 3f75dc949b330f9ba73313cf058902bde86fd80d Mon Sep 17 00:00:00 2001 From: Songjun Wu Date: Wed, 17 Aug 2016 03:05:28 -0300 Subject: [media] atmel-isc: DT binding for Image Sensor Controller driver DT binding documentation for ISC driver. Acked-by: Rob Herring Signed-off-by: Songjun Wu Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- .../devicetree/bindings/media/atmel-isc.txt | 65 ++++++++++++++++++++++ 1 file changed, 65 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/atmel-isc.txt diff --git a/Documentation/devicetree/bindings/media/atmel-isc.txt b/Documentation/devicetree/bindings/media/atmel-isc.txt new file mode 100644 index 000000000000..bbe0e87c6188 --- /dev/null +++ b/Documentation/devicetree/bindings/media/atmel-isc.txt @@ -0,0 +1,65 @@ +Atmel Image Sensor Controller (ISC) +---------------------------------------------- + +Required properties for ISC: +- compatible + Must be "atmel,sama5d2-isc". +- reg + Physical base address and length of the registers set for the device. +- interrupts + Should contain IRQ line for the ISC. +- clocks + List of clock specifiers, corresponding to entries in + the clock-names property; + Please refer to clock-bindings.txt. +- clock-names + Required elements: "hclock", "iscck", "gck". +- #clock-cells + Should be 0. +- clock-output-names + Should be "isc-mck". +- pinctrl-names, pinctrl-0 + Please refer to pinctrl-bindings.txt. + +ISC supports a single port node with parallel bus. It should contain one +'port' child node with child 'endpoint' node. Please refer to the bindings +defined in Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: +isc: isc@f0008000 { + compatible = "atmel,sama5d2-isc"; + reg = <0xf0008000 0x4000>; + interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>; + clocks = <&isc_clk>, <&iscck>, <&isc_gclk>; + clock-names = "hclock", "iscck", "gck"; + #clock-cells = <0>; + clock-output-names = "isc-mck"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>; + + port { + isc_0: endpoint { + remote-endpoint = <&ov7740_0>; + hsync-active = <1>; + vsync-active = <0>; + pclk-sample = <1>; + }; + }; +}; + +i2c1: i2c@fc028000 { + ov7740: camera@21 { + compatible = "ovti,ov7740"; + reg = <0x21>; + clocks = <&isc>; + clock-names = "xvclk"; + assigned-clocks = <&isc>; + assigned-clock-rates = <24000000>; + + port { + ov7740_0: endpoint { + remote-endpoint = <&isc_0>; + }; + }; + }; +}; -- cgit v1.2.3