From 3490c92a0963280f7f01ebb23989066a67dfd18d Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Mon, 15 May 2017 13:30:29 +1200 Subject: hwmon: (adt7475) add high frequency support Systems using 4-wire fans usually require high frequency (22.5kHz) output on the pwm. Add 22500 as a valid option in the pwmfreq_table. In high frequency mode the low-order bit are ignored so they can safely be set to 0. Signed-off-by: Chris Packham Signed-off-by: Guenter Roeck --- drivers/hwmon/adt7475.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c index 3eb8c5c2f8af..3dfb16a95185 100644 --- a/drivers/hwmon/adt7475.c +++ b/drivers/hwmon/adt7475.c @@ -852,7 +852,7 @@ static ssize_t set_pwmctrl(struct device *dev, struct device_attribute *attr, /* List of frequencies for the PWM */ static const int pwmfreq_table[] = { - 11, 14, 22, 29, 35, 44, 58, 88 + 11, 14, 22, 29, 35, 44, 58, 88, 22500 }; static ssize_t show_pwmfreq(struct device *dev, struct device_attribute *attr, @@ -860,9 +860,10 @@ static ssize_t show_pwmfreq(struct device *dev, struct device_attribute *attr, { struct adt7475_data *data = adt7475_update_device(dev); struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + int i = clamp_val(data->range[sattr->index] & 0xf, 0, + ARRAY_SIZE(pwmfreq_table) - 1); - return sprintf(buf, "%d\n", - pwmfreq_table[data->range[sattr->index] & 7]); + return sprintf(buf, "%d\n", pwmfreq_table[i]); } static ssize_t set_pwmfreq(struct device *dev, struct device_attribute *attr, @@ -883,7 +884,7 @@ static ssize_t set_pwmfreq(struct device *dev, struct device_attribute *attr, data->range[sattr->index] = adt7475_read(TEMP_TRANGE_REG(sattr->index)); - data->range[sattr->index] &= ~7; + data->range[sattr->index] &= ~0xf; data->range[sattr->index] |= out; i2c_smbus_write_byte_data(client, TEMP_TRANGE_REG(sattr->index), -- cgit v1.2.3