From 15f1122f92c02f654037d8fb98164b785207b7af Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 15 Jan 2020 07:25:28 -0600 Subject: usb: musb: omap2430: Handle multiple ID ground interrupts We currently get "unhandled DISCONNECT transition" warnings from musb core on device disconnect as things are wrongly set to OTG_STATE_A_IDLE in host mode when enumerating devices. We can also get "Failed to write reg index" errors after enumerating. This is happening at least with cpcap phy where we get multiple ID ground interrupts. Looks like it's VBUS keeps timing out and needs to be kicked when the phy sends multiple ID ground interrupts during host mode. Cc: Jacopo Mondi Cc: Marcel Partap Cc: Merlijn Wajer Cc: Michael Scott Cc: NeKit Cc: Pavel Machek Cc: Sebastian Reichel Acked-by: Pavel Machek Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Link: https://lore.kernel.org/r/20200115132547.364-7-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/omap2430.c | 25 +++++++++++++++++++------ 1 file changed, 19 insertions(+), 6 deletions(-) diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 920862c3fc64..e572ee624128 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -151,13 +151,26 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) switch (glue->status) { case MUSB_ID_GROUND: dev_dbg(musb->controller, "ID GND\n"); - - musb->xceiv->otg->state = OTG_STATE_A_IDLE; - musb->xceiv->last_event = USB_EVENT_ID; - if (musb->gadget_driver) { - omap_control_usb_set_mode(glue->control_otghs, - USB_MODE_HOST); + switch (musb->xceiv->otg->state) { + case OTG_STATE_A_WAIT_VRISE: + case OTG_STATE_A_WAIT_BCON: + case OTG_STATE_A_HOST: + case OTG_STATE_A_IDLE: + /* + * On multiple ID ground interrupts just keep enabling + * VBUS. At least cpcap VBUS shuts down otherwise. + */ omap2430_musb_set_vbus(musb, 1); + break; + default: + musb->xceiv->otg->state = OTG_STATE_A_IDLE; + musb->xceiv->last_event = USB_EVENT_ID; + if (musb->gadget_driver) { + omap_control_usb_set_mode(glue->control_otghs, + USB_MODE_HOST); + omap2430_musb_set_vbus(musb, 1); + } + break; } break; -- cgit v1.2.3