From b58262396fabd43dc869b576e3defdd23b32fe94 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Wed, 11 Apr 2018 17:31:35 +0200 Subject: drm/imx: imx-ldb: disable LDB on driver bind The LVDS signal integrity is only guaranteed when the correct enable sequence (first IPU DI, then LDB) is used. If the LDB display output was active before the imx-drm driver is loaded (like when a bootsplash was active) the DI will be disabled by the full IPU reset we do when loading the driver. The LDB control registers are not part of the IPU range and thus will remain unchanged. This leads to the LDB still being active when the DI is getting enabled, effectively reversing the required enable sequence. Fix this by also disabling the LDB on driver bind. Signed-off-by: Lucas Stach Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/imx-ldb.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c index 56dd7a9a8e25..17974c0b4be8 100644 --- a/drivers/gpu/drm/imx/imx-ldb.c +++ b/drivers/gpu/drm/imx/imx-ldb.c @@ -612,6 +612,9 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) return PTR_ERR(imx_ldb->regmap); } + /* disable LDB by resetting the control register to POR default */ + regmap_write(imx_ldb->regmap, IOMUXC_GPR2, 0); + imx_ldb->dev = dev; if (of_id) -- cgit v1.2.3 From c80d673b91a6c81d765864e10f2b15110ee900ad Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Wed, 11 Apr 2018 17:31:36 +0200 Subject: drm/imx: imx-ldb: check if channel is enabled before printing warning If the second LVDS channel has been disabled in the DT when using dual-channel mode we should not print a warning. Signed-off-by: Lucas Stach Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/imx-ldb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c index 17974c0b4be8..dd5312b02a8d 100644 --- a/drivers/gpu/drm/imx/imx-ldb.c +++ b/drivers/gpu/drm/imx/imx-ldb.c @@ -655,14 +655,14 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) if (ret || i < 0 || i > 1) return -EINVAL; + if (!of_device_is_available(child)) + continue; + if (dual && i > 0) { dev_warn(dev, "dual-channel mode, ignoring second output\n"); continue; } - if (!of_device_is_available(child)) - continue; - channel = &imx_ldb->channel[i]; channel->ldb = imx_ldb; channel->chno = i; -- cgit v1.2.3 From bbe4a089e299efe696ef520e58513c12c0d497c9 Mon Sep 17 00:00:00 2001 From: Steve Longerbeam Date: Thu, 31 May 2018 17:30:41 -0700 Subject: gpu: ipu-csi: Check for field type alternate When the CSI is receiving from a bt.656 bus, include a check for field type 'alternate' when determining whether to set CSI clock mode to CCIR656_INTERLACED or CCIR656_PROGRESSIVE. Signed-off-by: Steve Longerbeam Signed-off-by: Philipp Zabel --- drivers/gpu/ipu-v3/ipu-csi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/ipu-v3/ipu-csi.c b/drivers/gpu/ipu-v3/ipu-csi.c index caa05b0702e1..5450a2db1219 100644 --- a/drivers/gpu/ipu-v3/ipu-csi.c +++ b/drivers/gpu/ipu-v3/ipu-csi.c @@ -339,7 +339,8 @@ static void fill_csi_bus_cfg(struct ipu_csi_bus_config *csicfg, break; case V4L2_MBUS_BT656: csicfg->ext_vsync = 0; - if (V4L2_FIELD_HAS_BOTH(mbus_fmt->field)) + if (V4L2_FIELD_HAS_BOTH(mbus_fmt->field) || + mbus_fmt->field == V4L2_FIELD_ALTERNATE) csicfg->clk_mode = IPU_CSI_CLK_MODE_CCIR656_INTERLACED; else csicfg->clk_mode = IPU_CSI_CLK_MODE_CCIR656_PROGRESSIVE; -- cgit v1.2.3