| Age | Commit message (Collapse) | Author |
|---|
|
Drop bsp_vcpu pointer from kvm struct since its only use is incorrect
anyway.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
This fixes byte accesses to IOAPIC_REG_SELECT as mandated by at least the
ICH10 and Intel Series 5 chipset specs. It also makes ioapic_mmio_write
consistent with ioapic_mmio_read, which also allows byte and word accesses.
Signed-off-by: Julian Stecklina <js@alien8.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Currently the method of dealing with an IO operation on a bus (PIO/MMIO)
is to call the read or write callback for each device registered
on the bus until we find a device which handles it.
Since the number of devices on a bus can be significant due to ioeventfds
and coalesced MMIO zones, this leads to a lot of overhead on each IO
operation.
Instead of registering devices, we now register ranges which points to
a device. Lookup is done using an efficient bsearch instead of a linear
search.
Performance test was conducted by comparing exit count per second with
200 ioeventfds created on one byte and the guest is trying to access a
different byte continuously (triggering usermode exits).
Before the patch the guest has achieved 259k exits per second, after the
patch the guest does 274k exits per second.
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Function ioapic_debug() in the ioapic_deliver() misnames
one filed by reference. This patch correct it.
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Devices register mask notifier using gsi, but irqchip knows about
irqchip/pin, so conversion from irqchip/pin to gsi should be done before
looking for mask notifier to call.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Read ioapic->irr inside ioapic->lock protected section.
KVM-Stable-Tag
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
kvm_set_irq is used from non sleepable contexes, so convert ioapic from
mutex to spinlock.
KVM-Stable-Tag.
Tested-by: Ralf Bonenkamp <ralf.bonenkamp@swyx.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
|
If we fail to init ioapic device or the fail to setup the default irq
routing, the device register by kvm_create_pic() and kvm_ioapic_init()
remain unregister. This patch fixed to do this.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
kvm->arch.vioapic should be NULL in case of kvm_ioapic_init() failure
due to cannot register io dev.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
When the guest acknowledges an interrupt, it sends an EOI message to the local
apic, which broadcasts it to the ioapic. To handle the EOI, we need to take
the ioapic mutex.
On large guests, this causes a lot of contention on this mutex. Since large
guests usually don't route interrupts via the ioapic (they use msi instead),
this is completely unnecessary.
Avoid taking the mutex by introducing a handled_vectors bitmap. Before taking
the mutex, check if the ioapic was actually responsible for the acked vector.
If not, we can return early.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
The allows removal of irq_lock from the injection path.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
This bug was introduced by b4a2f5e723e4f7df467.
Cc: stable@kernel.org
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Today kvm_io_bus_regsiter_dev() returns void and will internally BUG_ON
if it fails. We want to create dynamic MMIO/PIO entries driven from
userspace later in the series, so we need to enhance the code to be more
robust with the following changes:
1) Add a return value to the registration function
2) Fix up all the callsites to check the return code, handle any
failures, and percolate the error up to the caller.
3) Add an unregister function that collapses holes in the array
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Add tracepoint in msi/ioapic/pic set_irq() functions,
in IPI sending and in the point where IRQ is placed into
apic's IRR.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Cosmetic only. No logic is changed by this patch.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
There is a missing unlock on one fail path in ioapic_mmio_write,
fix that.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
This changes bus accesses to use high-level kvm_io_bus_read/kvm_io_bus_write
functions. in_range now becomes unused so it is removed from device ops in
favor of read/write callbacks performing range checks internally.
This allows aliasing (mostly for in-kernel virtio), as well as better error
handling by making it possible to pass errors up to userspace.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Use slots_lock to protect device list on the bus. slots_lock is already
taken for read everywhere, so we only need to take it for write when
registering devices. This is in preparation to removing in_range and
kvm->lock around it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Use it instead of open code "vcpu_id zero is BSP" assumption.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Introduce irq_lock, and use to protect ioapic data structures.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
We modernize the io_device code so that we use container_of() instead of
dev->private, and move the vtable to a separate ops structure
(theoretically allows better caching for multiple instances of the same
ops structure)
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
The check for an edge is broken in current ioapic code. ioapic->irr is
cleared on each edge interrupt by ioapic_service() and this makes
old_irr != ioapic->irr condition in kvm_ioapic_set_irq() to be always
true. The patch fixes the code to properly recognise edge.
Some HW emulation calls set_irq() without level change. If each such
call is propagated to an OS it may confuse a device driver. This is the
case with keyboard device emulation and Windows XP x64 installer on SMP VM.
Each keystroke produce two interrupts (down/up) one interrupt is
submitted to CPU0 and another to CPU1. This confuses Windows somehow
and it ignores keystrokes.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Deliver interrupt during destination matching loop.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Use kvm_apic_match_dest() in kvm_get_intr_delivery_bitmask() instead
of duplicating the same code. Use kvm_get_intr_delivery_bitmask() in
apic_send_ipi() to figure out ipi destination instead of reimplementing
the logic.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
ioapic_deliver() and kvm_set_msi() have code duplication. Move
the code into ioapic_deliver_entry() function and call it from
both places.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Get rid of ioapic_inj_irq() and ioapic_inj_nmi() functions.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Gleb fixed bitmap ops usage in kvm_ioapic_get_delivery_bitmask.
Sheng merged two functions, as well as fixed several issues in
kvm_get_intr_delivery_bitmask
1. deliver_bitmask is a bitmap rather than a unsigned long intereger.
2. Lowest priority target bitmap wrong calculated by mistake.
3. Prevent potential NULL reference.
4. Declaration in include/kvm_host.h caused powerpc compilation warning.
5. Add warning for guest broadcast interrupt with lowest priority delivery mode.
6. Removed duplicate bitmap clean up in caller of kvm_get_intr_delivery_bitmask.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
It's also convenient when we extend KVM supported vcpu number in the future.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
In order to use with bit ops.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Prepared for reuse ioapic_redir_entry for MSI.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
IRQ injection status is either -1 (if there was no CPU found
that should except the interrupt because IRQ was masked or
ioapic was misconfigured or ...) or >= 0 in that case the
number indicates to how many CPUs interrupt was injected.
If the value is 0 it means that the interrupt was coalesced
and probably should be reinjected.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
IRQ ack notifications assume an identity mapping between pin->gsi,
which might not be the case with, for example, HPET.
Translate before acking.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
|
|
Allow clients to request notifications when the guest masks or unmasks a
particular irq line. This complements irq ack notifications, as the guest
will not ack an irq line that is masked.
Currently implemented for the ioapic only.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
It would be used for MSI in device assignment, for MSI dispatch.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Kick the NMI receiving VCPU in case the triggering caller runs in a
different context.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Before enabling notify_acked_irq for ia64, leave the related APIs as
nop-op first.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
|
|
Based on a patch from: Ben-Ami Yassour <benami@il.ibm.com>
which was based on a patch from: Amit Shah <amit.shah@qumranet.com>
Notify IRQ acking on PIC/APIC emulation. The previous patch missed two things:
- Edge triggered interrupts on IOAPIC
- PIC reset with IRR/ISR set should be equivalent to ack (LAPIC probably
needs something similar).
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
CC: Amit Shah <amit.shah@qumranet.com>
CC: Ben-Ami Yassour <benami@il.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
|
|
Modify member in_range() of structure kvm_io_device to pass length and the type
of the I/O (write or read).
This modification allows to use kvm_io_device with coalesced MMIO.
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>
|
|
[avi: fix ia64 build breakage]
Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
|
|
The "remote_irr" variable is used to indicate an interrupt
which has been received by the LAPIC, but not acked.
In our EOI handler, we unset remote_irr and re-inject the
interrupt if the interrupt line is still asserted.
However, we do not set remote_irr here, leading to a
situation where if kvm_ioapic_set_irq() is called, then we go
ahead and call ioapic_service(). This means that IRR is
re-asserted even though the interrupt is currently in service
(i.e. LAPIC IRR is cleared and ISR/TMR set)
The issue with this is that when the currently executing
interrupt handler finishes and writes LAPIC EOI, then TMR is
unset and EOI sent to the IOAPIC. Since IRR is now asserted,
but TMR is not, then when the second interrupt is handled,
no EOI is sent and if there is any pending interrupt, it is
not re-injected.
This fixes a hang only seen while running mke2fs -j on an
8Gb virtio disk backed by a fully sparse raw file, with
aliguori "avoid fragmented virtio-blk transfers by copying"
changes.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
|
|
The ioapic acknowledge path translates interrupt vectors to irqs. It
currently uses a first match algorithm, stopping when it finds the first
redirection table entry containing the vector. That fails however if the
guest changes the irq to a different line, leaving the old redirection table
entry in place (though masked). Result is interrupts not making it to the
guest.
Fix by always scanning the entire redirection table.
Signed-off-by: Avi Kivity <avi@qumranet.com>
|
|
There's a bug in the IOAPIC code for level-triggered interrupts. Its
relatively easy to trigger by sharing (virtio-blk + usbtablet was the
testcase, initially reported by Gerd von Egidy).
The "remote_irr" variable is used to indicate accepted but not yet acked
interrupts. Its cleared from the EOI handler.
Problem is that the EOI handler clears remote_irr unconditionally, even
if it reinjected another pending interrupt.
In that case, kvm_ioapic_set_irq() proceeds to ioapic_service() which
sets remote_irr even if it failed to inject (since the IRR was high due
to EOI reinjection).
Since the TMR bit has been cleared by the first EOI, the second one
fails to clear remote_irr.
End result is interrupt line dead.
Fix it by setting remote_irr only if a new pending interrupt has been
generated (and the TMR bit for vector in question set).
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
|
|
Some Linux versions allow the timer interrupt to be processed by more than
one cpu, leading to hangs due to tsc instability. Work around the issue
by only disaptching the interrupt to vcpu 0.
Problem analyzed (and patch tested) by Sheng Yang.
Signed-off-by: Avi Kivity <avi@qumranet.com>
|
|
Move ioapic code to common, since IA64 also needs it.
Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
|
