summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2020-04-22selftests: A few improvements to fib_nexthops.shDavid Ahern
Add nodad when adding IPv6 addresses and remove the sleep. A recent change to iproute2 moved the 'pref medium' to the prefix (where it belongs). Change the expected route check to strip 'pref medium' to be compatible with old and new iproute2. Add IPv4 runtime test with an IPv6 address as the gateway in the default route. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22selftests: tc-testing: Add a TDC test for pedit munge ip6 dsfieldPetr Machata
Add a self-test for the IPv6 dsfield munge that iproute2 will support. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22selftests: forwarding: pedit_dsfield: Add pedit munge ip6 dsfieldPetr Machata
Extend the pedit_dsfield forwarding selftest with coverage of "pedit ex munge ip6 dsfield set". Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22selftests: Add tests for vrf and xfrmsDavid Ahern
Add tests for vrf and xfrms with a second round after adding a qdisc. There are a few known problems documented with the test cases that fail. The fix is non-trivial; will come back to it when time allows. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20selftests: pmtu: implement IPIP, SIT and ip6tnl PMTU discovery testsLourdes Pedrajas
Add PMTU discovery tests for these encapsulations: - IPIP - SIT, mode ip6ip - ip6tnl, modes ip6ip6 and ipip6 Signed-off-by: Lourdes Pedrajas <lu@pplo.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Disable RISCV BPF JIT builds when !MMU, from Björn Töpel. 2) nf_tables leaves dangling pointer after free, fix from Eric Dumazet. 3) Out of boundary write in __xsk_rcv_memcpy(), fix from Li RongQing. 4) Adjust icmp6 message source address selection when routes have a preferred source address set, from Tim Stallard. 5) Be sure to validate HSR protocol version when creating new links, from Taehee Yoo. 6) CAP_NET_ADMIN should be sufficient to manage l2tp tunnels even in non-initial namespaces, from Michael Weiß. 7) Missing release firmware call in mlx5, from Eran Ben Elisha. 8) Fix variable type in macsec_changelink(), caught by KASAN. Fix from Taehee Yoo. 9) Fix pause frame negotiation in marvell phy driver, from Clemens Gruber. 10) Record RX queue early enough in tun packet paths such that XDP programs will see the correct RX queue index, from Gilberto Bertin. 11) Fix double unlock in mptcp, from Florian Westphal. 12) Fix offset overflow in ARM bpf JIT, from Luke Nelson. 13) marvell10g needs to soft reset PHY when coming out of low power mode, from Russell King. 14) Fix MTU setting regression in stmmac for some chip types, from Florian Fainelli. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits) amd-xgbe: Use __napi_schedule() in BH context mISDN: make dmril and dmrim static net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode tipc: fix incorrect increasing of link window Documentation: Fix tcp_challenge_ack_limit default value net: tulip: make early_486_chipsets static dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400 ipv6: remove redundant assignment to variable err net/rds: Use ERR_PTR for rds_message_alloc_sgs() net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge selftests/bpf: Check for correct program attach/detach in xdp_attach test libbpf: Fix type of old_fd in bpf_xdp_set_link_opts libbpf: Always specify expected_attach_type on program load if supported xsk: Add missing check on user supplied headroom size mac80211: fix channel switch trigger from unknown mesh peer mac80211: fix race in ieee80211_register_hw() net: marvell10g: soft-reset the PHY when coming out of low power net: marvell10g: report firmware version net/cxgb4: Check the return from t4_query_params properly ...
2020-04-15selftests/bpf: Check for correct program attach/detach in xdp_attach testToke Høiland-Jørgensen
David Ahern noticed that there was a bug in the EXPECTED_FD code so programs did not get detached properly when that parameter was supplied. This case was not included in the xdp_attach tests; so let's add it to be sure that such a bug does not sneak back in down. Fixes: 87854a0b57b3 ("selftests/bpf: Add tests for attaching XDP programs") Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200414145025.182163-2-toke@redhat.com
2020-04-15libbpf: Fix type of old_fd in bpf_xdp_set_link_optsToke Høiland-Jørgensen
The 'old_fd' parameter used for atomic replacement of XDP programs is supposed to be an FD, but was left as a u32 from an earlier iteration of the patch that added it. It was converted to an int when read, so things worked correctly even with negative values, but better change the definition to correctly reflect the intention. Fixes: bd5ca3ef93cd ("libbpf: Add function to set link XDP fd while specifying old program") Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: David Ahern <dsahern@gmail.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200414145025.182163-1-toke@redhat.com
2020-04-15libbpf: Always specify expected_attach_type on program load if supportedAndrii Nakryiko
For some types of BPF programs that utilize expected_attach_type, libbpf won't set load_attr.expected_attach_type, even if expected_attach_type is known from section definition. This was done to preserve backwards compatibility with old kernels that didn't recognize expected_attach_type attribute yet (which was added in 5e43f899b03a ("bpf: Check attach type at prog load time"). But this is problematic for some BPF programs that utilize newer features that require kernel to know specific expected_attach_type (e.g., extended set of return codes for cgroup_skb/egress programs). This patch makes libbpf specify expected_attach_type by default, but also detect support for this field in kernel and not set it during program load. This allows to have a good metadata for bpf_program (e.g., bpf_program__get_extected_attach_type()), but still work with old kernels (for cases where it can work at all). Additionally, due to expected_attach_type being always set for recognized program types, bpf_program__attach_cgroup doesn't have to do extra checks to determine correct attach type, so remove that additional logic. Also adjust section_names selftest to account for this change. More detailed discussion can be found in [0]. [0] https://lore.kernel.org/bpf/20200412003604.GA15986@rdna-mbp.dhcp.thefacebook.com/ Fixes: 5cf1e9145630 ("bpf: cgroup inet skb programs can return 0 to 3") Fixes: 5e43f899b03a ("bpf: Check attach type at prog load time") Reported-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Andrey Ignatov <rdna@fb.com> Link: https://lore.kernel.org/bpf/20200414182645.1368174-1-andriin@fb.com
2020-04-14tools, bpftool: Fix struct_ops command invalid pointer freeDaniel T. Lee
In commit 65c93628599d ("bpftool: Add struct_ops support") a new type of command named struct_ops has been added. This command requires a kernel with CONFIG_DEBUG_INFO_BTF=y set and for retrieving BTF info in bpftool, the helper get_btf_vmlinux() is used. When running this command on kernel without BTF debug info, this will lead to 'btf_vmlinux' variable being an invalid(error) pointer. And by this, btf_free() causes a segfault when executing 'bpftool struct_ops'. This commit adds pointer validation with IS_ERR not to free invalid pointer, and this will fix the segfault issue. Fixes: 65c93628599d ("bpftool: Add struct_ops support") Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200410020612.2930667-1-danieltimlee@gmail.com
2020-04-14selftests/bpf: Validate frozen map contents stays frozenAndrii Nakryiko
Test that frozen and mmap()'ed BPF map can't be mprotect()'ed as writable or executable memory. Also validate that "downgrading" from writable to read-only doesn't screw up internal writable count accounting for the purposes of map freezing. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200410202613.3679837-2-andriin@fb.com
2020-04-11Merge tag 'kbuild-v5.7-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - raise minimum supported binutils version to 2.23 - remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports - move remaining CONFIG_AS_* tests to Kconfig from Makefile - enable -Wtautological-compare warnings to catch more issues - do not support GCC plugins for GCC <= 4.7 - fix various breakages of 'make xconfig' - include the linker version used for linking the kernel into LINUX_COMPILER, which is used for the banner, and also exposed to /proc/version - link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which allows us to remove the lib-ksyms.o workaround, and to solve the last known issue of the LLVM linker - add dummy tools in scripts/dummy-tools/ to enable all compiler tests in Kconfig, which will be useful for distro maintainers - support the single switch, LLVM=1 to use Clang and all LLVM utilities instead of GCC and Binutils. - support LLVM_IAS=1 to enable the integrated assembler, which is still experimental * tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits) kbuild: fix comment about missing include guard detection kbuild: support LLVM=1 to switch the default tools to Clang/LLVM kbuild: replace AS=clang with LLVM_IAS=1 kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory kbuild: remove -I$(srctree)/tools/include from scripts/Makefile kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h Documentation/llvm: fix the name of llvm-size kbuild: mkcompile_h: Include $LD version in /proc/version kconfig: qconf: Fix a few alignment issues kconfig: qconf: remove some old bogus TODOs kconfig: qconf: fix support for the split view mode kconfig: qconf: fix the content of the main widget kconfig: qconf: Change title for the item window kconfig: qconf: clean deprecated warnings gcc-plugins: drop support for GCC <= 4.7 kbuild: Enable -Wtautological-compare x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2 crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean' ...
2020-04-10change email address for Pali RohárPali Rohár
For security reasons I stopped using gmail account and kernel address is now up-to-date alias to my personal address. People periodically send me emails to address which they found in source code of drivers, so this change reflects state where people can contact me. [ Added .mailmap entry as per Joe Perches - Linus ] Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joe Perches <joe@perches.com> Link: http://lkml.kernel.org/r/20200307104237.8199-1-pali@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10selftests: kmod: test disabling module autoloadingEric Biggers
Test that request_module() fails with -ENOENT when /proc/sys/kernel/modprobe contains (a) a nonexistent path, and (b) an empty path. Case (b) is a regression test for the patch "kmod: make request_module() return an error when autoloading is disabled". Tested with 'kmod.sh -t 0010 && kmod.sh -t 0011', and also simply with 'kmod.sh' to run all kmod tests. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: NeilBrown <neilb@suse.com> Link: http://lkml.kernel.org/r/20200312202552.241885-5-ebiggers@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10selftests: kmod: fix handling test numbers above 9Eric Biggers
get_test_count() and get_test_enabled() were broken for test numbers above 9 due to awk interpreting a field specification like '$0010' as octal rather than decimal. Fix it by stripping the leading zeroes. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Jessica Yu <jeyu@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: NeilBrown <neilb@suse.com> Link: http://lkml.kernel.org/r/20200318230515.171692-5-ebiggers@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2020-04-10 The following pull-request contains BPF updates for your *net* tree. We've added 13 non-merge commits during the last 7 day(s) which contain a total of 13 files changed, 137 insertions(+), 43 deletions(-). The main changes are: 1) JIT code emission fixes for riscv and arm32, from Luke Nelson and Xi Wang. 2) Disable vmlinux BTF info if GCC_PLUGIN_RANDSTRUCT is used, from Slava Bacherikov. 3) Fix oob write in AF_XDP when meta data is used, from Li RongQing. 4) Fix bpf_get_link_xdp_id() handling on single prog when flags are specified, from Andrey Ignatov. 5) Fix sk_assign() BPF helper for request sockets that can have sk_reuseport field uninitialized, from Joe Stringer. 6) Fix mprotect() test case for the BPF LSM, from KP Singh. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-09Merge tag 'powerpc-5.7-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: "The bulk of this is the series to make CONFIG_COMPAT user-selectable, it's been around for a long time but was blocked behind the syscall-in-C series. Plus there's also a few fixes and other minor things. Summary: - A fix for a crash in machine check handling on pseries (ie. guests) - A small series to make it possible to disable CONFIG_COMPAT, and turn it off by default for ppc64le where it's not used. - A few other miscellaneous fixes and small improvements. Thanks to: Alexey Kardashevskiy, Anju T Sudhakar, Arnd Bergmann, Christophe Leroy, Dan Carpenter, Ganesh Goudar, Geert Uytterhoeven, Geoff Levand, Mahesh Salgaonkar, Markus Elfring, Michal Suchanek, Nicholas Piggin, Stephen Boyd, Wen Xiong" * tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Always build the tm-poison test 64-bit powerpc: Improve ppc_save_regs() Revert "powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled" powerpc/time: Replace <linux/clk-provider.h> by <linux/of_clk.h> powerpc/pseries/ddw: Extend upper limit for huge DMA window for persistent memory powerpc/perf: split callchain.c by bitness powerpc/64: Make COMPAT user-selectable disabled on littleendian by default. powerpc/64: make buildable without CONFIG_COMPAT powerpc/perf: consolidate valid_user_sp -> invalid_user_sp powerpc/perf: consolidate read_user_stack_32 powerpc: move common register copy functions from signal_32.c to signal.c powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro powerpc/ps3: Set CONFIG_UEVENT_HELPER=y in ps3_defconfig powerpc/ps3: Remove an unneeded NULL check powerpc/ps3: Remove duplicate error message powerpc/powernv: Re-enable imc trace-mode in kernel powerpc/perf: Implement a global lock to avoid races between trace, core and thread imc events. powerpc/pseries: Fix MCE handling on pseries selftests/eeh: Skip ahci adapters powerpc/64s: Fix doorbell wakeup msgclr optimisation
2020-04-08Merge tag 'libnvdimm-for-5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm and dax updates from Dan Williams: "There were multiple touches outside of drivers/nvdimm/ this round to add cross arch compatibility to the devm_memremap_pages() interface, enhance numa information for persistent memory ranges, and add a zero_page_range() dax operation. This cycle I switched from the patchwork api to Konstantin's b4 script for collecting tags (from x86, PowerPC, filesystem, and device-mapper folks), and everything looks to have gone ok there. This has all appeared in -next with no reported issues. Summary: - Add support for region alignment configuration and enforcement to fix compatibility across architectures and PowerPC page size configurations. - Introduce 'zero_page_range' as a dax operation. This facilitates filesystem-dax operation without a block-device. - Introduce phys_to_target_node() to facilitate drivers that want to know resulting numa node if a given reserved address range was onlined. - Advertise a persistence-domain for of_pmem and papr_scm. The persistence domain indicates where cpu-store cycles need to reach in the platform-memory subsystem before the platform will consider them power-fail protected. - Promote numa_map_to_online_node() to a cross-kernel generic facility. - Save x86 numa information to allow for node-id lookups for reserved memory ranges, deploy that capability for the e820-pmem driver. - Pick up some miscellaneous minor fixes, that missed v5.6-final, including a some smatch reports in the ioctl path and some unit test compilation fixups. - Fixup some flexible-array declarations" * tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (29 commits) dax: Move mandatory ->zero_page_range() check in alloc_dax() dax,iomap: Add helper dax_iomap_zero() to zero a range dax: Use new dax zero page method for zeroing a page dm,dax: Add dax zero_page_range operation s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driver dax, pmem: Add a dax operation zero_page_range pmem: Add functions for reading/writing page to/from pmem libnvdimm: Update persistence domain value for of_pmem and papr_scm device tools/test/nvdimm: Fix out of tree build libnvdimm/region: Fix build error libnvdimm/region: Replace zero-length array with flexible-array member libnvdimm/label: Replace zero-length array with flexible-array member ACPI: NFIT: Replace zero-length array with flexible-array member libnvdimm/region: Introduce an 'align' attribute libnvdimm/region: Introduce NDD_LABELING libnvdimm/namespace: Enforce memremap_compat_align() libnvdimm/pfn: Prevent raw mode fallback if pfn-infoblock valid libnvdimm: Out of bounds read in __nd_ioctl() acpi/nfit: improve bounds checking for 'func' mm/memremap_pages: Introduce memremap_compat_align() ...
2020-04-09kbuild: support LLVM=1 to switch the default tools to Clang/LLVMMasahiro Yamada
As Documentation/kbuild/llvm.rst implies, building the kernel with a full set of LLVM tools gets very verbose and unwieldy. Provide a single switch LLVM=1 to use Clang and LLVM tools instead of GCC and Binutils. You can pass it from the command line or as an environment variable. Please note LLVM=1 does not turn on the integrated assembler. You need to pass LLVM_IAS=1 to use it. When the upstream kernel is ready for the integrated assembler, I think we can make it default. We discussed what we need, and we agreed to go with a simple boolean flag that switches both target and host tools: https://lkml.org/lkml/2020/3/28/494 https://lkml.org/lkml/2020/4/3/43 Some items discussed, but not adopted: - LLVM_DIR When multiple versions of LLVM are installed, I just thought supporting LLVM_DIR=/path/to/my/llvm/bin/ might be useful. CC = $(LLVM_DIR)clang LD = $(LLVM_DIR)ld.lld ... However, we can handle this by modifying PATH. So, we decided to not do this. - LLVM_SUFFIX Some distributions (e.g. Debian) package specific versions of LLVM with naming conventions that use the version as a suffix. CC = clang$(LLVM_SUFFIX) LD = ld.lld(LLVM_SUFFIX) ... will allow a user to pass LLVM_SUFFIX=-11 to use clang-11 etc., but the suffixed versions in /usr/bin/ are symlinks to binaries in /usr/lib/llvm-#/bin/, so this can also be handled by PATH. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
2020-04-08Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: - Some bug fixes - The new vdpa subsystem with two first drivers * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-balloon: Revert "virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM" vdpa: move to drivers/vdpa virtio: Intel IFC VF driver for VDPA vdpasim: vDPA device simulator vhost: introduce vDPA-based backend virtio: introduce a vDPA based transport vDPA: introduce vDPA bus vringh: IOTLB support vhost: factor out IOTLB vhost: allow per device message handler vhost: refine vhost and vringh kconfig virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM virtio-net: Introduce hash report feature virtio-net: Introduce RSS receive steering feature virtio-net: Introduce extended RSC feature tools/virtio: option to build an out of tree module
2020-04-07Merge tag 'thermal-v5.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Convert tsens configuration DT binding to yaml (Rajeshwari) - Add interrupt support on the rcar sensor (Niklas Söderlund) - Add a new Spreadtrum thermal driver (Baolin Wang) - Add thermal binding for the fsl scu board, a new API to retrieve the sensor id bound to the thermal zone and i.MX system controller sensor (Anson Huang)) - Remove warning log when a deferred probe is requested on Exynos (Marek Szyprowski) - Add the thermal monitoring unit support for imx8mm with its DT bindings (Anson Huang) - Rephrase the Kconfig text for clarity (Linus Walleij) - Use the gpio descriptor for the ti-soc-thermal (Linus Walleij) - Align msg structure to 4 bytes for i.MX SC, fix the Kconfig dependency, add the __may_be unused annotation for PM functions and the COMPILE_TEST option for imx8mm (Anson Huang) - Fix a dependency on regmap in Kconfig for qoriq (Yuantian Tang) - Add DT binding and support for the rcar gen3 r8a77961 and improve the error path on the rcar init function (Niklas Söderlund) - Cleanup and improvements for the tsens Qcom sensor (Amit Kucheria) - Improve code by removing lock and caching values in the rcar thermal sensor (Niklas Söderlund) - Cleanup in the qoriq drivers and add a call to imx_thermal_unregister_legacy_cooling in the removal function (Anson Huang) - Remove redundant 'maxItems' in tsens and sprd DT bindings (Rob Herring) - Change the thermal DT bindings by making the cooling-maps optional (Yuantian Tang) - Add Tiger Lake support (Sumeet Pawnikar) - Use scnprintf() for avoiding potential buffer overflow (Takashi Iwai) - Make pkg_temp_lock a raw_spinlock_t(Clark Williams) - Fix incorrect data types by changing them to signed on i.MX SC (Anson Huang) - Replace zero-length array with flexible-array member (Gustavo A. R. Silva) - Add support for i.MX8MP in the driver and in the DT bindings (Anson Huang) - Fix return value of the cpufreq_set_cur_state() function (Willy Wolff) - Remove abusing and scary WARN_ON in the cpufreq cooling device (Daniel Lezcano) - Fix build warning of incorrect argument type reported by sparse on imx8mm (Anson Huang) - Fix stub for the devfreq cooling device (Martin Blumenstingl) - Fix cpu idle cooling documentation (Sergey Vidishev) * tag 'thermal-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (52 commits) Documentation: cpu-idle-cooling: Fix diagram for 33% duty cycle thermal: devfreq_cooling: inline all stubs for CONFIG_DEVFREQ_THERMAL=n thermal: imx8mm: Fix build warning of incorrect argument type thermal/drivers/cpufreq_cooling: Remove abusing WARN_ON thermal/drivers/cpufreq_cooling: Fix return of cpufreq_set_cur_state thermal: imx8mm: Add i.MX8MP support dt-bindings: thermal: imx8mm-thermal: Add support for i.MX8MP thermal: qcom: tsens.h: Replace zero-length array with flexible-array member thermal: imx_sc_thermal: Fix incorrect data type thermal: int340x_thermal: Use scnprintf() for avoiding potential buffer overflow thermal: int340x: processor_thermal: Add Tiger Lake support thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t dt-bindings: thermal: make cooling-maps property optional dt-bindings: thermal: qcom-tsens: Remove redundant 'maxItems' dt-bindings: thermal: sprd: Remove redundant 'maxItems' thermal: imx: Calling imx_thermal_unregister_legacy_cooling() in .remove thermal: qoriq: Sort includes alphabetically thermal: qoriq: Use devm_add_action_or_reset() to handle all cleanups thermal: rcar_thermal: Remove lock in rcar_thermal_get_current_temp() thermal: rcar_thermal: Do not store ctemp in rcar_thermal_priv ...
2020-04-07tc-testing: remove duplicate code in tdc.pyRoman Mashak
In set_operation_mode() function remove duplicated check for args.list parameter, which is already done one line before. Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-08selftests/bpf: Add test for bpf_get_link_xdp_idAndrey Ignatov
Add xdp_info selftest that makes sure that bpf_get_link_xdp_id returns valid prog_id for different input modes: * w/ and w/o flags when no program is attached; * w/ and w/o flags when one program is attached. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/2a9a6d1ce33b91ccc1aa3de6dba2d309f2062811.1586236080.git.rdna@fb.com
2020-04-08libbpf: Fix bpf_get_link_xdp_id flags handlingAndrey Ignatov
Currently if one of XDP_FLAGS_{DRV,HW,SKB}_MODE flags is passed to bpf_get_link_xdp_id() and there is a single XDP program attached to ifindex, that program's id will be returned by bpf_get_link_xdp_id() in prog_id argument no matter what mode the program is attached in, i.e. flags argument is not taken into account. For example, if there is a single program attached with XDP_FLAGS_SKB_MODE but user calls bpf_get_link_xdp_id() with flags = XDP_FLAGS_DRV_MODE, that skb program will be returned. Fix it by returning info->prog_id only if user didn't specify flags. If flags is specified then return corresponding mode-specific-field from struct xdp_link_info. The initial error was introduced in commit 50db9f073188 ("libbpf: Add a support for getting xdp prog id on ifindex") and then refactored in 473f4e133a12 so 473f4e133a12 is used in the Fixes tag. Fixes: 473f4e133a12 ("libbpf: Add bpf_get_link_xdp_info() function to get more XDP information") Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/0e9e30490b44b447bb2bebc69c7135e7fe7e4e40.1586236080.git.rdna@fb.com
2020-04-07kselftest: introduce new epoll test caseRoman Penyaev
This testcase repeats epollbug.c from the bug: https://bugzilla.kernel.org/show_bug.cgi?id=205933 What it tests? It tests the race between epoll_ctl() and epoll_wait(). New event mask passed to epoll_ctl() triggers wake up, which can be missed because of the bug described in the link. Reproduction is 100%, so easy to fix. Kudos, Max, for wonderful test case. Signed-off-by: Roman Penyaev <rpenyaev@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Max Neunhoeffer <max@arangodb.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Christopher Kohlhoff <chris.kohlhoff@clearpool.io> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Jes Sorensen <jes.sorensen@gmail.com> Link: http://lkml.kernel.org/r/20200214170211.561524-2-rpenyaev@suse.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07lib/rbtree: fix coding style of assignmentschenqiwu
Leave blank space between the right-hand and left-hand side of the assignment to meet the kernel coding style better. Signed-off-by: chenqiwu <chenqiwu@xiaomi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Michel Lespinasse <walken@google.com> Link: http://lkml.kernel.org/r/1582621140-25850-1-git-send-email-qiwuchen55@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07userfaultfd: selftests: add write-protect testPeter Xu
Add uffd tests for write protection. Instead of introducing new tests for it, let's simply squashing uffd-wp tests into existing uffd-missing test cases. Changes are: (1) Bouncing tests We do the write-protection in two ways during the bouncing test: - By using UFFDIO_COPY_MODE_WP when resolving MISSING pages: then we'll make sure for each bounce process every single page will be at least fault twice: once for MISSING, once for WP. - By direct call UFFDIO_WRITEPROTECT on existing faulted memories: To further torture the explicit page protection procedures of uffd-wp, we split each bounce procedure into two halves (in the background thread): the first half will be MISSING+WP for each page as explained above. After the first half, we write protect the faulted region in the background thread to make sure at least half of the pages will be write protected again which is the first half to test the new UFFDIO_WRITEPROTECT call. Then we continue with the 2nd half, which will contain both MISSING and WP faulting tests for the 2nd half and WP-only faults from the 1st half. (2) Event/Signal test Mostly previous tests but will do MISSING+WP for each page. For sigbus-mode test we'll need to provide standalone path to handle the write protection faults. For all tests, do statistics as well for uffd-wp pages. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-20-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07userfaultfd: selftests: refactor statisticsPeter Xu
Introduce uffd_stats structure for statistics of the self test, at the same time refactor the code to always pass in the uffd_stats for either read() or poll() typed fault handling threads instead of using two different ways to return the statistic results. No functional change. With the new structure, it's very easy to introduce new statistics. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-19-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-06libbpf: Initialize *nl_pid so gcc 10 is happyJeremy Cline
Builds of Fedora's kernel-tools package started to fail with "may be used uninitialized" warnings for nl_pid in bpf_set_link_xdp_fd() and bpf_get_link_xdp_info() on the s390 architecture. Although libbpf_netlink_open() always returns a negative number when it does not set *nl_pid, the compiler does not determine this and thus believes the variable might be used uninitialized. Assuage gcc's fears by explicitly initializing nl_pid. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1807781 Signed-off-by: Jeremy Cline <jcline@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200404051430.698058-1-jcline@redhat.com
2020-04-05Merge tag 'perf-urgent-2020-04-05' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more perf updates from Thomas Gleixner: "Perf updates all over the place: core: - Support for cgroup tracking in samples to allow cgroup based analysis tools: - Support for cgroup analysis - Commandline option and hotkey for perf top to change the sort order - A set of fixes all over the place - Various build system related improvements - Updates of the X86 pmu event JSON data - Documentation updates" * tag 'perf-urgent-2020-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits) perf python: Fix clang detection to strip out options passed in $CC perf tools: Support Python 3.8+ in Makefile perf script: Fix invalid read of directory entry after closedir() perf script report: Fix SEGFAULT when using DWARF mode perf script: add -S/--symbols documentation perf pmu-events x86: Use CPU_CLK_UNHALTED.THREAD in Kernel_Utilization metric perf events parser: Add missing Intel CPU events to parser perf script: Allow --symbol to accept hexadecimal addresses perf report/top TUI: Fix title line formatting perf top: Support hotkey to change sort order perf top: Support --group-sort-idx to change the sort order perf symbols: Fix arm64 gap between kernel start and module end perf build-test: Honour JOBS to override detection of number of cores perf script: Add --show-cgroup-events option perf top: Add --all-cgroups option perf record: Add --all-cgroups option perf record: Support synthesizing cgroup events perf report: Add 'cgroup' sort key perf cgroup: Maintain cgroup hierarchy perf tools: Basic support for CGROUP event ...
2020-04-05Merge tag 'powerpc-5.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Slightly late as I had to rebase mid-week to insert a bug fix: - A large series from Nick for 64-bit to further rework our exception vectors, and rewrite portions of the syscall entry/exit and interrupt return in C. The result is much easier to follow code that is also faster in general. - Cleanup of our ptrace code to split various parts out that had become badly intertwined with #ifdefs over the years. - Changes to our NUMA setup under the PowerVM hypervisor which should hopefully avoid non-sensical topologies which can lead to warnings from the workqueue code and other problems. - MAINTAINERS updates to remove some of our old orphan entries and update the status of others. - Quite a few other small changes and fixes all over the map. Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas, Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman, Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara, Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor, Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat, Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff, Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel Datwyler, Vaibhav Jain, YueHaibing" * tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits) powerpc: Make setjmp/longjmp signature standard powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type powerpc: Suppress .eh_frame generation powerpc: Drop -fno-dwarf2-cfi-asm powerpc/32: drop unused ISA_DMA_THRESHOLD powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces selftests/powerpc: Fix try-run when source tree is not writable powerpc/vmlinux.lds: Explicitly retain .gnu.hash powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c powerpc/ptrace: create ppc_gethwdinfo() powerpc/ptrace: create ptrace_get_debugreg() powerpc/ptrace: split out ADV_DEBUG_REGS related functions. powerpc/ptrace: move register viewing functions out of ptrace.c powerpc/ptrace: split out TRANSACTIONAL_MEM related functions. powerpc/ptrace: split out SPE related functions. powerpc/ptrace: split out ALTIVEC related functions. powerpc/ptrace: split out VSX related functions. powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64 powerpc/ptrace: remove unused header includes ...
2020-04-05Merge tag 'trace-v5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "New tracing features: - The ring buffer is no longer disabled when reading the trace file. The trace_pipe file was made to be used for live tracing and reading as it acted like the normal producer/consumer. As the trace file would not consume the data, the easy way of handling it was to just disable writes to the ring buffer. This came to a surprise to the BPF folks who complained about lost events due to reading. This is no longer an issue. If someone wants to keep the old disabling there's a new option "pause-on-trace" that can be set. - New set_ftrace_notrace_pid file. PIDs in this file will not be traced by the function tracer. Similar to set_ftrace_pid, which makes the function tracer only trace those tasks with PIDs in the file, the set_ftrace_notrace_pid does the reverse. - New set_event_notrace_pid file. PIDs in this file will cause events not to be traced if triggered by a task with a matching PID. Similar to the set_event_pid file but will not be traced. Note, sched_waking and sched_switch events may still be traced if one of the tasks referenced by those events contains a PID that is allowed to be traced. Tracing related features: - New bootconfig option, that is attached to the initrd file. If bootconfig is on the command line, then the initrd file is searched looking for a bootconfig appended at the end. - New GPU tracepoint infrastructure to help the gfx drivers to get off debugfs (acked by Greg Kroah-Hartman) And other minor updates and fixes" * tag 'trace-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits) tracing: Do not allocate buffer in trace_find_next_entry() in atomic tracing: Add documentation on set_ftrace_notrace_pid and set_event_notrace_pid selftests/ftrace: Add test to test new set_event_notrace_pid file selftests/ftrace: Add test to test new set_ftrace_notrace_pid file tracing: Create set_event_notrace_pid to not trace tasks ftrace: Create set_ftrace_notrace_pid to not trace tasks ftrace: Make function trace pid filtering a bit more exact ftrace/kprobe: Show the maxactive number on kprobe_events tracing: Have the document reflect that the trace file keeps tracing enabled ring-buffer/tracing: Have iterator acknowledge dropped events tracing: Do not disable tracing when reading the trace file ring-buffer: Do not disable recording when there is an iterator ring-buffer: Make resize disable per cpu buffer instead of total buffer ring-buffer: Optimize rb_iter_head_event() ring-buffer: Do not die if rb_iter_peek() fails more than thrice ring-buffer: Have rb_iter_head_event() handle concurrent writer ring-buffer: Add page_stamp to iterator for synchronization ring-buffer: Rename ring_buffer_read() to read_buffer_iter_advance() ring-buffer: Have ring_buffer_empty() not depend on tracing stopped tracing: Save off entry when peeking at next entry ...
2020-04-04Merge tag 'gpio-v5.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO development for the v5.7 kernel cycle. Core and userspace API: - The userspace API KFIFOs have been imoproved with locks that do not block interrupts. This makes us better at getting events to userspace without blocking or disturbing new events arriving in the same time. This was reviewed by the KFIFO maintainer Stefani. This is a generic improvement which paves the road for similar improvements in other subsystems. - We provide a new ioctl() for monitoring changes in the line information, such as when multiple clients are taking lines and giving them back, possibly reconfiguring them in the process: we can now monitor that and not get stuck with stale static information. - An example tool 'gpio-watch' is provided to showcase this functionality. - Timestamps for events are switched to ktime_get_ns() which is monotonic. We previously had a 'realtime' stamp which could move forward and *backward* in time, which probably would just cause silent bugs and weird behaviour. In the long run we see two relevant timestamps: ktime_get_ns() or the timestamp sometimes provided by the GPIO hardware itself, if that exists. - Device Tree overlay support for GPIO hogs. On systems that load overlays, these overlays can now contain hogs, and will then be respected. - Handle pin control interaction with nonexisting pin ranges in the GPIO library core instead of in the individual drivers. New drivers: - New driver for the Mellanox BlueField 2 GPIO controller. Driver improvements: - Introduce the BGPIOF_NO_SET_ON_INPUT flag to the generic MMIO GPIO library and use this flag in the MT7621 driver. - Texas Instruments OMAP CPU power management improvements, such as blocking of idle on pending GPIO interrupts" * tag 'gpio-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (59 commits) Revert "gpio: eic-sprd: Use devm_platform_ioremap_resource()" pinctrl: Unconditionally assign .request()/.free() gpio: Unconditionally assign .request()/.free() gpio: export of_pinctrl_get to modules pinctrl: Define of_pinctrl_get() dummy for !PINCTRL gpio: Rename variable in core APIs gpio: Avoid using pin ranges with !PINCTRL gpiolib: Remove unused gpio_chip parameter from gpio_set_bias() gpiolib: Pass gpio_desc to gpio_set_config() gpiolib: Introduce gpiod_set_config() tools: gpio: Fix out-of-tree build regression gpio: gpiolib: fix a doc warning gpio: tegra186: Add Tegra194 pin ranges for GG.0 and GG.1 gpio: tegra186: Add support for pin ranges gpio: Support GPIO controllers without pin-ranges ARM: integrator: impd1: Use GPIO_LOOKUP() helper macro gpio: brcmstb: support gpio-line-names property tools: gpio: Fix typo in gpio-utils tools: gpio-hammer: Apply scripts/Lindent and retain good changes gpiolib: gpio_name_to_desc: factor out !name check ...
2020-04-04Merge tag 'threads-v5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull thread updates from Christian Brauner: "The main change for this cycle was the extension for clone3() to support spawning processes directly into cgroups via CLONE_INTO_CGROUP (commit ef2c41cf38a7: "clone3: allow spawning processes into cgroups"). But since I had to touch kernel/cgroup/ quite a bit I had Tejun route that through his tree this time around to make it easier for him to handle other changes. So here is just the unexciting leftovers: a regression test for the ENOMEM regression we fixed in commit b26ebfe12f34 ("pid: Fix error return value in some cases") verifying that we report ENOMEM when trying to create a new process in a pid namespace whose init process/subreaper has already exited" * tag 'threads-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: selftests: add pid namespace ENOMEM regression test
2020-04-04selftests/powerpc: Always build the tm-poison test 64-bitMichael Ellerman
The tm-poison test includes inline asm which is 64-bit only, so the test must be built 64-bit in order to work. Otherwise it fails, eg: # file tm-poison tm-poison: ELF 32-bit MSB executable, PowerPC or cisco 4500, version 1 (SYSV) ... # ./tm-poison test: tm_poison_test Unknown value 0x1fff71150 leaked into f31! Unknown value 0x1fff710c0 leaked into vr31! failure: tm_poison_test Fixes: a003365cab64 ("powerpc/tm: Add tm-poison test") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200403095656.3772005-1-mpe@ellerman.id.au
2020-04-04Merge tag 'perf-urgent-for-mingo-5.7-20200403' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes and improvements from Arnaldo Carvalho de Melo: perf python: Arnaldo Carvalho de Melo: - Fix clang detection to strip out options passed in $CC. build: He Zhe: - Normalize gcc parameter when generating arch errno table, fixing the build by removing options from $(CC). Sam Lunt: - Support Python 3.8+ in Makefile. perf report/top: Arnaldo Carvalho de Melo: - Fix title line formatting. perf script: Andreas Gerstmayr: - Fix SEGFAULT when using DWARF mode. - Fix invalid read of directory entry after closedir(), found with valgrind. Hagen Paul Pfeifer: - Introduce --deltatime option. Stephane Eranian: - Allow --symbol to accept hexadecimal addresses. Ian Rogers: - Add -S/--symbols documentation Namhyung Kim: - Add --show-cgroup-events option. perf python: Arnaldo Carvalho de Melo: - Include rwsem.c in the python binding, needed by the cgroups improvements. build-test: Arnaldo Carvalho de Melo: - Honour JOBS to override detection of number of cores perf top: Jin Yao: - Support --group-sort-idx to change the sort order - perf top: Support hotkey to change sort order perf pmu-events x86: Jin Yao: - Use CPU_CLK_UNHALTED.THREAD in Kernel_Utilization metric perf symbols arm64: Kemeng Shi: - Fix arm64 gap between kernel start and module end kernel perf subsystem: Namhyung Kim: - Add PERF_RECORD_CGROUP event and Add PERF_SAMPLE_CGROUP feature, to allow cgroup tracking, saving a link between cgroup path and its id number. perf cgroup: Namhyung Kim: - Maintain cgroup hierarchy. perf report: Namhyung Kim: - Add 'cgroup' sort key. perf record: Namhyung Kim: - Support synthesizing cgroup events for pre-existing cgroups. - Add --all-cgroups option Documentation: Tony Jones: - Update docs regarding kernel/user space unwinding. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-04-03Merge tag 'pci-v5.7-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg) - Add more 32 GT/s link speed decoding and improve the implementation (Yicong Yang) Resource management: - Add support for sizing programmable host bridge apertures and fix a related alpha Nautilus regression (Ivan Kokshaysky) Interrupts: - Add boot interrupt quirk mechanism for Xeon chipsets and document boot interrupts (Sean V Kelley) PCIe native device hotplug: - When possible, disable in-band presence detect and use PDS (Alexandru Gagniuc) - Add DMI table for devices that don't use in-band presence detection but don't advertise that correctly (Stuart Hayes) - Fix hang when powering slots up/down via sysfs (Lukas Wunner) - Fix an MSI interrupt race (Stuart Hayes) Virtualization: - Add ACS quirks for Zhaoxin devices (Raymond Pang) Error handling: - Add Error Disconnect Recover (EDR) support so firmware can report devices disconnected via DPC and we can try to recover (Kuppuswamy Sathyanarayanan) Peer-to-peer DMA: - Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew Maier) ASPM: - Reduce severity of common clock config message (Chris Packham) - Clear the correct bits when enabling L1 substates, so we don't go to the wrong state (Yicong Yang) Endpoint framework: - Replace EPF linkup ops with notifier call chain and improve locking (Kishon Vijay Abraham I) - Fix concurrent memory allocation in OB address region (Kishon Vijay Abraham I) - Move PF function number assignment to EPC core to support multiple function creation methods (Kishon Vijay Abraham I) - Fix issue with clearing configfs "start" entry (Kunihiko Hayashi) - Fix issue with endpoint MSI-X ignoring BAR Indicator and Table Offset (Kishon Vijay Abraham I) - Add support for testing DMA transfers (Kishon Vijay Abraham I) - Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I) - Add support for tests to clear IRQ (Kishon Vijay Abraham I) - Add common DT schema for endpoint controllers (Kishon Vijay Abraham I) Amlogic Meson PCIe controller driver: - Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi Pommarel) - Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi Pommarel) Cadence PCIe controller driver: - Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay Abraham I) Intel VMD host bridge driver: - Add two VMD Device IDs that require bus restriction mode (Sushma Kalakota) Mobiveil PCIe controller driver: - Refactor and modularize mobiveil driver (Hou Zhiqiang) - Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang) Microsoft Hyper-V host bridge driver: - Add support for Hyper-V PCI protocol version 1.3 and PCI_BUS_RELATIONS2 (Long Li) - Refactor to prepare for virtual PCI on non-x86 architectures (Boqun Feng) - Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Use pci_parse_request_of_pci_ranges() (Rob Herring) - Add support for endpoint mode and related DT updates (Vidya Sagar) - Reduce -EPROBE_DEFER error message log level (Thierry Reding) Qualcomm PCIe controller driver: - Restrict class fixup to specific Qualcomm devices (Bjorn Andersson) Synopsys DesignWare PCIe controller driver: - Refactor core initialization code for endpoint mode (Vidya Sagar) - Fix endpoint MSI-X to use correct table address (Kishon Vijay Abraham I) TI DRA7xx PCIe controller driver: - Fix MSI IRQ handling (Vignesh Raghavendra) TI Keystone PCIe controller driver: - Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I) Miscellaneous: - Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng Feng) - Use ioremap(), not phys_to_virt(), for platform ROM to fix video ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)" * tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits) misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS PCI: tegra: Print -EPROBE_DEFER error message at debug level misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq() misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices tools: PCI: Add 'e' to clear IRQ misc: pci_endpoint_test: Add ioctl to clear IRQ misc: pci_endpoint_test: Avoid using module parameter to determine irqtype PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments misc: pci_endpoint_test: Add support to get DMA option from userspace tools: PCI: Add 'd' command line option to support DMA misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation PCI: endpoint: functions/pci-epf-test: Print throughput information PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data PCI: pciehp: Fix MSI interrupt race PCI: pciehp: Fix indefinite wait on sysfs requests PCI: endpoint: Fix clearing start entry in configfs PCI: tegra: Add support for PCIe endpoint mode in Tegra194 PCI: sysfs: Revert "rescan" file renames ...
2020-04-03Merge tag 'char-misc-5.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc/other driver patches for 5.7-rc1. Lots of things in here, and it's later than expected due to some reverts to resolve some reported issues. All is now clean with no reported problems in linux-next. Included in here is: - interconnect updates - mei driver updates - uio updates - nvmem driver updates - soundwire updates - binderfs updates - coresight updates - habanalabs updates - mhi new bus type and core - extcon driver updates - some Kconfig cleanups - other small misc driver cleanups and updates As mentioned, all have been in linux-next for a while, and with the last two reverts, all is calm and good" * tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits) Revert "driver core: platform: Initialize dma_parms for platform devices" Revert "amba: Initialize dma_parms for amba devices" amba: Initialize dma_parms for amba devices driver core: platform: Initialize dma_parms for platform devices bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device() bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture bus: mhi: core: Add support for reading MHI info from device misc: rtsx: set correct pcr_ops for rts522A speakup: misc: Use dynamic minor numbers for speakup devices mei: me: add cedar fork device ids coresight: do not use the BIT() macro in the UAPI header Documentation: provide IBM contacts for embargoed hardware nvmem: core: remove nvmem_sysfs_get_groups() nvmem: core: use is_bin_visible for permissions nvmem: core: use device_register and device_unregister nvmem: core: add root_only member to nvmem device struct extcon: axp288: Add wakeup support extcon: Mark extcon_get_edev_name() function as exported symbol extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format ...
2020-04-03Merge tag 'spdx-5.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here are three SPDX patches for 5.7-rc1. One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed. Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.) All three of these have been in linux-next for a while, with no reported issues other than the merge conflict" * tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: ASoC: MT6660: make spdxcheck.py happy .gitignore: add SPDX License Identifier .gitignore: remove too obvious comments
2020-04-03Merge branch 'for-5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: - Christian extended clone3 so that processes can be spawned into cgroups directly. This is not only neat in terms of semantics but also avoids grabbing the global cgroup_threadgroup_rwsem for migration. - Daniel added !root xattr support to cgroupfs. Userland already uses xattrs on cgroupfs for bookkeeping. This will allow delegated cgroups to support such usages. - Prateek tried to make cpuset hotplug handling synchronous but that led to possible deadlock scenarios. Reverted. - Other minor changes including release_agent_path handling cleanup. * 'for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: docs: cgroup-v1: Document the cpuset_v2_mode mount option Revert "cpuset: Make cpuset hotplug synchronous" cgroupfs: Support user xattrs kernfs: Add option to enable user xattrs kernfs: Add removed_size out param for simple_xattr_set kernfs: kvmalloc xattr value instead of kmalloc cgroup: Restructure release_agent_path handling selftests/cgroup: add tests for cloning into cgroups clone3: allow spawning processes into cgroups cgroup: add cgroup_may_write() helper cgroup: refactor fork helpers cgroup: add cgroup_get_from_file() helper cgroup: unify attach permission checking cpuset: Make cpuset hotplug synchronous cgroup.c: Use built-in RCU list checking kselftest/cgroup: add cgroup destruction test cgroup: Clean up css_set task traversal
2020-04-03perf python: Fix clang detection to strip out options passed in $CCArnaldo Carvalho de Melo
The clang check in the python setup.py file expected $CC to be just the name of the compiler, not the compiler + options, i.e. all options were expected to be passed in $CFLAGS, this ends up making it fail in systems where CC is set to, e.g.: "aarch64-linaro-linux-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot" Like this: $ python3 >>> from subprocess import Popen >>> a = Popen(["aarch64-linux-gnu-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot", "-v"]) Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/usr/lib/python3.6/subprocess.py", line 729, in __init__ restore_signals, start_new_session) File "/usr/lib/python3.6/subprocess.py", line 1364, in _execute_child raise child_exception_type(errno_num, err_msg, err_filename) FileNotFoundError: [Errno 2] No such file or directory: 'aarch64-linux-gnu-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot': 'aarch64-linux-gnu-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot' >>> Make it more robust, covering this case, by passing cc.split()[0] as the first arg to popen(). Fixes: a7ffd416d804 ("perf python: Fix clang detection when using CC=clang-version") Reported-by: Daniel Díaz <daniel.diaz@linaro.org> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Tested-by: Daniel Díaz <daniel.diaz@linaro.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ilie Halip <ilie.halip@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20200401124037.GA12534@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-03perf tools: Support Python 3.8+ in MakefileSam Lunt
Python 3.8 changed the output of 'python-config --ldflags' to no longer include the '-lpythonX.Y' flag (this apparently fixed an issue loading modules with a statically linked Python executable). The libpython feature check in linux/build/feature fails if the Python library is not included in FEATURE_CHECK_LDFLAGS-libpython variable. This adds a check in the Makefile to determine if PYTHON_CONFIG accepts the '--embed' flag and passes that flag alongside '--ldflags' if so. tools/perf is the only place the libpython feature check is used. Signed-off-by: Sam Lunt <samuel.j.lunt@gmail.com> Tested-by: He Zhe <zhe.he@windriver.com> Link: http://lore.kernel.org/lkml/c56be2e1-8111-9dfe-8298-f7d0f9ab7431@windriver.com Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: trivial@kernel.org Cc: stable@kernel.org Link: http://lore.kernel.org/lkml/20200131181123.tmamivhq4b7uqasr@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-03perf script: Fix invalid read of directory entry after closedir()Andreas Gerstmayr
closedir(lang_dir) frees the memory of script_dirent->d_name, which gets accessed in the next line in a call to scnprintf(). Valgrind report: Invalid read of size 1 ==413557== at 0x483CBE6: strlen (vg_replace_strmem.c:461) ==413557== by 0x4DD45FD: __vfprintf_internal (vfprintf-internal.c:1688) ==413557== by 0x4DE6679: __vsnprintf_internal (vsnprintf.c:114) ==413557== by 0x53A037: vsnprintf (stdio2.h:80) ==413557== by 0x53A037: scnprintf (vsprintf.c:21) ==413557== by 0x435202: get_script_path (builtin-script.c:3223) ==413557== Address 0x52e7313 is 1,139 bytes inside a block of size 32,816 free'd ==413557== at 0x483AA0C: free (vg_replace_malloc.c:540) ==413557== by 0x4E303C0: closedir (closedir.c:50) ==413557== by 0x4351DC: get_script_path (builtin-script.c:3222) Signed-off-by: Andreas Gerstmayr <agerstmayr@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200402124337.419456-1-agerstmayr@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-03perf script report: Fix SEGFAULT when using DWARF modeAndreas Gerstmayr
When running perf script report with a Python script and a callgraph in DWARF mode, intr_regs->regs can be 0 and therefore crashing the regs_map function. Added a check for this condition (same check as in builtin-script.c:595). Signed-off-by: Andreas Gerstmayr <agerstmayr@redhat.com> Tested-by: Kim Phillips <kim.phillips@amd.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/20200402125417.422232-1-agerstmayr@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-03perf script: add -S/--symbols documentationIan Rogers
Capture both that this option exists and that symbols can be hexadecimal addresses. Signed-off-by: Ian Rogers <irogers@google.com> Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200402174130.140319-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-03perf pmu-events x86: Use CPU_CLK_UNHALTED.THREAD in Kernel_Utilization metricJin Yao
The kernel utilization metric does multiplexing currently and is somewhat unreliable. The problem is that it uses two instances of the fixed counter, and the kernel has to multipleplex which causes errors. So should use CPU_CLK_UNHALTED.THREAD instead. Before: # perf stat -M Kernel_Utilization -- sleep 1 Performance counter stats for 'sleep 1': 1,419,425 cpu_clk_unhalted.ref_tsc:k <not counted> cpu_clk_unhalted.ref_tsc (0.00%) After: # perf stat -M Kernel_Utilization -- sleep 1 Performance counter stats for 'sleep 1': 746,688 cpu_clk_unhalted.thread:k # 0.7 Kernel_Utilization 1,088,348 cpu_clk_unhalted.thread Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200309013125.7559-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-03perf events parser: Add missing Intel CPU events to parserAdrian Hunter
perf list expects CPU events to be parseable by name, e.g. # perf list | grep el-capacity-read el-capacity-read OR cpu/el-capacity-read/ [Kernel PMU event] But the event parser does not recognize them that way, e.g. # perf test -v "Parse event" <SNIP> running test 54 'cycles//u' running test 55 'cycles:k' running test 0 'cpu/config=10,config1,config2=3,period=1000/u' running test 1 'cpu/config=1,name=krava/u,cpu/config=2/u' running test 2 'cpu/config=1,call-graph=fp,time,period=100000/,cpu/config=2,call-graph=no,time=0,period=2000/' running test 3 'cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2/ukp' -> cpu/event=0,umask=0x11/ -> cpu/event=0,umask=0x13/ -> cpu/event=0x54,umask=0x1/ failed to parse event 'el-capacity-read:u,cpu/event=el-capacity-read/u', err 1, str 'parser error' event syntax error: 'el-capacity-read:u,cpu/event=el-capacity-read/u' \___ parser error test child finished with 1 ---- end ---- Parse event definition strings: FAILED! This happens because the parser splits names by '-' in order to deal with cache events. For example 'L1-dcache' is a token in parse-events.l which is matched to 'L1-dcache-load-miss' by the following rule: PE_NAME_CACHE_TYPE '-' PE_NAME_CACHE_OP_RESULT '-' PE_NAME_CACHE_OP_RESULT opt_event_config And so there is special handling for 2-part PMU names i.e. PE_PMU_EVENT_PRE '-' PE_PMU_EVENT_SUF sep_dc but no handling for 3-part names, which are instead added as tokens e.g. topdown-[a-z-]+ While it would be possible to add a rule for 3-part names, that would not work if the first parts were also a valid PMU name e.g. 'el-capacity-read' would be matched to 'el-capacity' before the parser reached the 3rd part. The parser would need significant change to rationalize all this, so instead fix for now by adding missing Intel CPU events with 3-part names to the event parser as tokens. Missing events were found by using: grep -r EVENT_ATTR_STR arch/x86/events/intel/core.c Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Link: http://lore.kernel.org/lkml/90c7ae07-c568-b6d3-f9c4-d0c1528a0610@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-03perf script: Allow --symbol to accept hexadecimal addressesStephane Eranian
This patch extends the perf script --symbols option to filter on hexadecimal addresses in addition to symbol names. This makes it easier to handle cases where symbols are aliased. With this patch, it is possible to mix and match symbols and hexadecimal addresses using the --symbols option. $ perf script --symbols=noploop,0x4007a0 Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200325220802.15039-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-03perf report/top TUI: Fix title line formattingArnaldo Carvalho de Melo
In d10ec006dcd7 ("perf hists browser: Allow passing an initial hotkey") the hist_entry__title() call was cut'n'pasted to a function where the 'title' variable is a pointer, not an array, so the sizeof(title) continues syntactically valid but ends up reducing the real size of the buffer where to format the first line in the screen to 8 bytes, which makes the formatting at the title at each refresh to produce just the string "Samples ", duh, fix it by passing the size of the buffer. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: d10ec006dcd7 ("perf hists browser: Allow passing an initial hotkey") Link: http://lore.kernel.org/lkml/20200330154314.GB4576@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-03perf top: Support hotkey to change sort orderJin Yao
It would be nice if we can use a hotkey in perf top browser to select a event for sorting. For example: perf top --group -e cycles,instructions,cache-misses Samples Overhead Shared Object Symbol 40.03% 45.71% 0.03% div [.] main 20.46% 14.67% 0.21% libc-2.27.so [.] __random_r 20.01% 19.54% 0.02% libc-2.27.so [.] __random 9.68% 10.68% 0.00% div [.] compute_flag 4.32% 4.70% 0.00% libc-2.27.so [.] rand 3.84% 3.43% 0.00% div [.] rand@plt 0.05% 0.05% 2.33% libc-2.27.so [.] __strcmp_sse2_unaligned 0.04% 0.08% 2.43% perf [.] perf_hpp__is_dynamic_en 0.04% 0.02% 6.64% perf [.] rb_next 0.04% 0.01% 3.87% perf [.] dso__find_symbol 0.04% 0.04% 1.77% perf [.] sort__dso_cmp When user press hotkey '2' (event index, starting from 0), it indicates to sort output by the third event in group (cache-misses). Samples Overhead Shared Object Symbol 4.07% 1.28% 6.68% perf [.] rb_next 3.57% 3.98% 4.11% perf [.] __hists__insert_output 3.67% 11.24% 3.60% perf [.] perf_hpp__is_dynamic_e 3.67% 3.20% 3.20% perf [.] hpp__sort_overhead 0.81% 0.06% 3.01% perf [.] dso__find_symbol 1.62% 5.47% 2.51% perf [.] hists__match 2.70% 1.86% 2.47% libc-2.27.so [.] _int_malloc 0.19% 0.00% 2.29% [kernel] [k] copy_page 0.41% 0.32% 1.98% perf [.] hists__decay_entries 1.84% 3.67% 1.68% perf [.] sort__dso_cmp 0.16% 0.00% 1.63% [kernel] [k] clear_page_erms Now the output is sorted by cache-misses. v2: --- Zero the history if hotkey is pressed. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200324220711.6025-2-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 02:30:52 +0000