summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2015-01-29perf record: Show precise number of samplesNamhyung Kim
After perf record finishes, it prints file size and number of samples in the file but this info is wrong since it assumes typical sample size of 24 bytes and divides file size by the value. However as we post-process recorded samples for build-id, it can show correct number like below. If build-id post-processing is not requested just omit the wrong number of samples. $ perf record noploop 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.159 MB perf.data (3989 samples) ] $ perf report --stdio -n # To display the perf.data header info, please use --header/--header-only options. # # Samples: 3K of event 'cycles' # Event count (approx.): 3771330663 # # Overhead Samples Command Shared Object Symbol # ........ ............ ....... ................ .......................... # 99.90% 3982 noploop noploop [.] main 0.09% 1 noploop ld-2.17.so [.] _dl_check_map_versions 0.01% 1 noploop [kernel.vmlinux] [k] setup_arg_pages 0.00% 5 noploop [kernel.vmlinux] [k] intel_pmu_enable_all Reported-by: Milian Wolff <mail@milianw.de> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1422518843-25818-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-29perf tools: Do not use __perf_session__process_events() directlyNamhyung Kim
It's only used for perf record to process build-id because its file size it's not fixed at this time due to remaining header features. However data offset and size is available so that we can use the perf_session__process_events() once we set the file size as the current offset like for now. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1422518843-25818-3-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-29perf callchain: Cache eh/debug frame offset for dwarf unwindNamhyung Kim
When libunwind tries to resolve callchains it needs to know the offset of .eh_frame_hdr or .debug_frame to access the dso. Since it will always return the same result for a given DSO, just cache the result as an optimization. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1422518843-25818-41-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-28perf tools: Provide stub for missing pthread_attr_setaffinity_npVineet Gupta
uClibc Linuxthreads.old doesn't support the pthread_attr_setaffinity_np() functioo: ----------------->8----------------------- CC bench/futex-hash.o CC bench/futex-wake.o bench/futex-hash.c: In function 'bench_futex_hash': bench/futex-hash.c:161:3: error: implicit declaration of function 'pthread_attr_setaffinity_np' [-Werror=implicit-function-declaration] ret = pthread_attr_setaffinity_np(&thread_attr, sizeof(cpu_set_t), &cpu); ^ bench/futex-hash.c:161:3: error: nested extern declaration of 'pthread_attr_setaffinity_np' [-Werror=nested-externs] ----------------->8----------------------- So introduce a test to check that and if not available provide a stub. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1421156604-30603-6-git-send-email-vgupta@synopsys.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-28perf evsel: Don't rely on malloc working for sz 0Vineet Gupta
When running perf on ARC (uClibc based userspace), ran into this issue ------------->8---------------- [ARCLinux]$ ./perf record ls bin etc perf sys debug init perf.data tmp [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.001 MB perf.data (~24 samples) ] [ARCLinux]$ ./perf report incompatible file format (rerun with -v to learn more) ------------->8---------------- The problem happens in the following call stack when zalloc is called with size zero glibc default / uClibc with MALLOC_GLIBC_COMPAT are OK, but not if that config option is not enabled. cmd_report perf_session__new perf_session__open perf_session__read_header read_attr(fd, header, &f_attr) nr_ids = f_attr.ids.size / sizeof(u64); <-- 0 perf_evsel__alloc_id(vsel, 1, nr_ids) zalloc(ncpus * nthreads * sizeof(u64)) <-- 0 header.c: read_attr() (gdb) p *f_attr $17 = { attr = { type = 0, size = 96, config = 0, { sample_period = 4000, sample_freq = 4000 }, ... ids = { offset = 104, size = 0 <------ } } Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Suggested-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1421156604-30603-5-git-send-email-vgupta@synopsys.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-28Merge branch 'perf/hw_breakpoints' into perf/coreIngo Molnar
The new hw_breakpoint bits are now ready for v3.20, merge them into the main branch, to avoid conflicts. Conflicts: tools/perf/Documentation/perf-record.txt Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-26tools lib traceevent: Add support for IP address formatsDavid Ahern
Add helpers for the following kernel formats: %pi4 print an IPv4 address with leading zeros %pI4 print an IPv4 address without leading zeros %pi6 print an IPv6 address without colons %pI6 print an IPv6 address with colons %pI6c print an IPv6 address in compressed form with colons %pISpc print an IP address from a sockaddr Allows these formats to be used in tracepoints. Quite a bit of this is adapted from code in lib/vsprintf.c. v4: - fixed pI6c description in git commit message per Valdis' comment v3: - use of 'c' and 'p' requires 'I' v2: - pass ptr+1 to print_ip_arg per Namhyung's comments - added field length checks to sockaddr function Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1418955071-36241-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-22perf ui/tui: Show fatal error message only if existsNamhyung Kim
When perf exits with some error it shows the error message with ui__error() or ui__warning() and then calls ui__exit() during exit_browser(). On TUI, it then shows a window titled "Fatal Error" to inform user a last message which might be related with this condition. However it sometimes contains no message and just annoyes users. The usual case for this is running perf top as normal user. (And /proc/sys/kernel/perf_event_paranoid being 1). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1421736050-5283-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-22perf tests: Fix typo in sample-parsing.cRasmus Villemoes
It was testing the same buffer for differences: memcmp(s1->user_stack.data, s1->user_stack.data, s1->user_stack.size) I'm pretty sure this wasn't supposed to be dead code. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1421946083-29863-1-git-send-email-linux@rasmusvillemoes.dk Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-22tools lib fs debugfs: Check if debugfs is mounted when handling ENOENTArnaldo Carvalho de Melo
If debugfs was already mounted, then its a matter of not finding the tracepoint, tell the user that perhaps a CONFIG_ setting is not enabled. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-6chfytoflyx3jwfqm7ebltu0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-22tools lib fs debugfs: Introduce debugfs__strerror_open_tpArnaldo Carvalho de Melo
There will be other cases where not just a tracepoint event is being opened below the debugfs mountpoint, but it is rather common, so provide one helper for that. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-q6e6zct49ql6nbcw8kkg0lbj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-22perf trace: Fix error reporting for evsel pgfault constructorArnaldo Carvalho de Melo
In that case the only failure possible is not to have enough memory, as we are just creating the evsels, not trying to access any system facility such as debugfs files or syscalls. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-7k6asvfhiwiu2zs6o2oknchk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-22tools lib fs: Pass filename to debugfs__strerror_openArnaldo Carvalho de Melo
It was hardcoded for one specific tracepoint, leftover from its initial user: 'perf trace'. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-j1jicvwljy5qx1nah4mkmyke@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-22tools lib fs: Adopt debugfs open strerrno methodArnaldo Carvalho de Melo
As this is not specific to an evlist and may be used with other tools. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a9up9mivx1pzdf5tqrqsx62d@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> tools/perf/util/include/asm/hash.h
2015-01-21perf diff: Fix -o/--order option behaviorNamhyung Kim
The prior change fixes default output ordering with each column but it breaks -o/--order option. This patch prepends a new hpp fmt struct to sort list but not to output field list so that it can affect ordering without adding a new output column. The new hpp fmt uses its own compare functions which treats dummy entries (which have no baseline) little differently - the delta field can be computed without baseline but others (ratio and wdiff) are not. The new output will look like below: $ perf diff -o 2 perf.data.{old,cur,new} ... # Baseline/0 Delta/1 Delta/2 Shared Object Symbol # .......... ....... ....... ................. .......................................... 22.98% +0.51% +0.52% libc-2.20.so [.] _int_malloc 5.70% +0.28% +0.30% libc-2.20.so [.] free 4.38% -0.21% +0.25% a.out [.] main 1.32% -0.15% +0.05% a.out [.] free@plt +0.01% [kernel.kallsyms] [k] intel_pstate_timer_func +0.01% [kernel.kallsyms] [k] _raw_spin_lock_irqsave +0.01% [kernel.kallsyms] [k] timekeeping_update.constprop.8 +0.01% +0.01% [kernel.kallsyms] [k] apic_timer_interrupt 0.01% -0.00% [kernel.kallsyms] [k] native_read_msr_safe 0.01% -0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe 1.31% +0.03% -0.06% a.out [.] malloc@plt 31.50% -0.74% -0.23% libc-2.20.so [.] _int_free 32.75% +0.28% -0.83% libc-2.20.so [.] malloc 0.01% [kernel.kallsyms] [k] scheduler_tick +0.01% [kernel.kallsyms] [k] read_tsc +0.01% [kernel.kallsyms] [k] perf_adjust_freq_unthr_context.part.82 In above example, the output was sorted by 'Delta/2' column first, and then 'Baseline/0' and finally 'Delta/1'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420677949-6719-8-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf diff: Fix output ordering to honor next columnNamhyung Kim
When perf diff prints output, it sorts the entries using baseline field by default, but entries which don't have baseline are not sorted properly. This patch makes it sorted by values of next column. Before: # Baseline/0 Delta/1 Delta/2 Shared Object Symbol # .......... ....... ....... ................. .......................................... # 32.75% +0.28% -0.83% libc-2.20.so [.] malloc 31.50% -0.74% -0.23% libc-2.20.so [.] _int_free 22.98% +0.51% +0.52% libc-2.20.so [.] _int_malloc 5.70% +0.28% +0.30% libc-2.20.so [.] free 4.38% -0.21% +0.25% a.out [.] main 1.32% -0.15% +0.05% a.out [.] free@plt 1.31% +0.03% -0.06% a.out [.] malloc@plt 0.01% -0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe 0.01% [kernel.kallsyms] [k] scheduler_tick 0.01% -0.00% [kernel.kallsyms] [k] native_read_msr_safe +0.01% [kernel.kallsyms] [k] _raw_spin_lock_irqsave +0.01% +0.01% [kernel.kallsyms] [k] apic_timer_interrupt +0.01% [kernel.kallsyms] [k] intel_pstate_timer_func +0.01% [kernel.kallsyms] [k] perf_adjust_freq_unthr_context.part.82 +0.01% [kernel.kallsyms] [k] read_tsc +0.01% [kernel.kallsyms] [k] timekeeping_update.constprop.8 After: # Baseline/0 Delta/1 Delta/2 Shared Object Symbol # .......... ....... ....... ................. .......................................... # 32.75% +0.28% -0.83% libc-2.20.so [.] malloc 31.50% -0.74% -0.23% libc-2.20.so [.] _int_free 22.98% +0.51% +0.52% libc-2.20.so [.] _int_malloc 5.70% +0.28% +0.30% libc-2.20.so [.] free 4.38% -0.21% +0.25% a.out [.] main 1.32% -0.15% +0.05% a.out [.] free@plt 1.31% +0.03% -0.06% a.out [.] malloc@plt 0.01% -0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe 0.01% [kernel.kallsyms] [k] scheduler_tick 0.01% -0.00% [kernel.kallsyms] [k] native_read_msr_safe +0.01% +0.01% [kernel.kallsyms] [k] apic_timer_interrupt +0.01% [kernel.kallsyms] [k] read_tsc +0.01% [kernel.kallsyms] [k] perf_adjust_freq_unthr_context.part.82 +0.01% [kernel.kallsyms] [k] intel_pstate_timer_func +0.01% [kernel.kallsyms] [k] _raw_spin_lock_irqsave +0.01% [kernel.kallsyms] [k] timekeeping_update.constprop.8 Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420677949-6719-7-git-send-email-namhyung@kernel.org [ Fixed up hist_entry__cmp_ method signatures, fallout from making previous cset buildable ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf tools: Pass struct perf_hpp_fmt to its callbacksNamhyung Kim
Currently ->cmp, ->collapse and ->sort callbacks doesn't pass corresponding fmt. But it'll be needed by upcoming changes in perf diff command. Suggested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420677949-6719-6-git-send-email-namhyung@kernel.org [ fix build by passing perf_hpp_fmt pointer to hist_entry__cmp_ methods ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf diff: Introduce fmt_to_data_file() helperNamhyung Kim
The fmt_to_data_file() is to retrieve struct data__file from perf_hpp_fmt which is embedded in diff_hpp_fmt. It'll be used by sort callback functions later. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420677949-6719-5-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf diff: Print diff result more preciselyNamhyung Kim
Current perf diff result is somewhat confusing since it sometimes hide small result and sometimes there's no result. So do not hide small result (less than 0.01%) and print "N/A" if baseline is not recorded (for ratio and wdiff only). Blank means the baseline is available but its pairs are not. Before: # Baseline Delta Shared Object Symbol # ........ ....... ................. ......................... # ... 0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe 0.01% [kernel.kallsyms] [k] scheduler_tick 0.01% [kernel.kallsyms] [k] native_read_msr_safe 0.00% [kernel.kallsyms] [k] __rcu_read_unlock [kernel.kallsyms] [k] _raw_spin_lock +0.01% [kernel.kallsyms] [k] apic_timer_interrupt [kernel.kallsyms] [k] read_tsc After: # Baseline Delta Shared Object Symbol # ........ ....... ................. ......................... # ... 0.01% -0.01% [kernel.kallsyms] [k] native_write_msr_safe 0.01% [kernel.kallsyms] [k] scheduler_tick 0.01% [kernel.kallsyms] [k] native_read_msr_safe 0.00% [kernel.kallsyms] [k] __rcu_read_unlock +0.01% [kernel.kallsyms] [k] _raw_spin_lock +0.01% [kernel.kallsyms] [k] apic_timer_interrupt +0.01% [kernel.kallsyms] [k] read_tsc Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1419656793-32756-3-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf diff: Get rid of hists__compute_resort()Namhyung Kim
The hists__compute_resort() is to sort output fields based on the given field/criteria. This was done without the sort list but as we added the field to the sort list, we can do it with normal hists__output_resort() using the ->sort callback. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1419656793-32756-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf tools: Allow use of an exclusive option more than onceNamhyung Kim
The exclusive options are to prohibit use of conflicting options at the same time. But it had a side effect that it also limits a such option can be used at most once. Currently the only user of the flag is perf probe and it allows to use such options more than once, but when one tries to use it, perf will fail like below: $ sudo perf probe -x /lib/libc-2.20.so --add malloc --add free Error: option `add' cannot be used with add ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420886028-15135-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf tools: Document parameterized and symbolic eventsCody P Schafer
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Cody P Schafer <dev@codyps.com> Cc: Haren Myneni <hbabu@us.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1420679633-28856-5-git-send-email-sukadev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf tools: Extend format_alias() to include event parametersCody P Schafer
This causes `perf list pmu` to show parameters for parameterized events like: pmu/event_name,param1=?,param2=?/ [Kernel PMU event] An example: hv_24x7/HPM_TLBIE__PHYS_CORE,core=?/ [Kernel PMU event] Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Cody P Schafer <dev@codyps.com> Cc: Haren Myneni <hbabu@us.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1420679633-28856-3-git-send-email-sukadev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf tools: Support parsing parameterized eventsCody P Schafer
Enable event specification like: pmu/event_name,param1=0x1,param2=0x4/ Assuming that /sys/bus/event_source/devices/pmu/events/event_name Contains something like param2=?,bar=1,param1=? Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Cody P Schafer <dev@codyps.com> Cc: Haren Myneni <hbabu@us.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1420679633-28856-2-git-send-email-sukadev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf tools: Remove some unused functions from color.cRickard Strandqvist
Removes some functions that are not used anywhere: color_parse_mem() color_parse() This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ramkumar Ramachandra <artagnon@gmail.com> Link: http://lkml.kernel.org/r/1419079865-354-1-git-send-email-rickard_strandqvist@spectrumdigital.se [ Remove now unused parse_{attr,color} routines too ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf report: Get rid of report__inc_stat()Namhyung Kim
The report__inc_stat() function collects the number of hist entries in the session in order to calculate the max size of the progess bar. It'd be better if it does it during the addition of hist entries so that it can be used by other places too. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1419223455-4362-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf hists: Introduce function for deleting/removing hist_entryArnaldo Carvalho de Melo
The code being used when decaying and deleting entries from a hists instance was the same, provide a function to avoid code dup. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-j6ideab7lkakavfvfguw858z@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf hists: Rename hist_entry__free to __deleteArnaldo Carvalho de Melo
No logic changes, just to be consistent. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-f7n5y0mvk6gew5185h6fg316@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf tools: Remove EOL whitespacesArnaldo Carvalho de Melo
Janitorial stuff: boredom moment. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-u70i7shys3kths4hzru72bha@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf mem: Move the mem_operations global to struct perf_memArnaldo Carvalho de Melo
Just like the other parameters, grouping it on the builtin-mem specific config area: struct perf_mem. Acked-by: Stephane Eranian <eranian@google.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Fowles <rfowles@redhat.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-ad8ns5l51ongemfsir3zy09x@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf mem: Enable sampling loads and stores simultaneouslyStephane Eranian
This patch modifies perf mem to default to sampling loads and stores simultaneously. It could only do one or the other before yet there was no hardware restriction preventing simultaneous collection. With this patch, one run is sufficient to collect both. It is still possible to sample only loads or stores by using the -t option: $ perf mem -t load rec $ perf mem -t load rep Or $ perf mem -t store rec $ perf mem -t store rep The perf report TUI will show one event at a time. The store output will contain a Weight column which will be empty. In V2, we updated the man pages to reflect the change and also simplify the initialization of the argv vector passed to the cmd_*() functions as per LKML feedback. In V3, we fixed typos in the changelog. Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Fowles <rfowles@redhat.com> Link: http://lkml.kernel.org/r/20141217152355.GA10053@thinkpad Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf probe: Fix probing kretprobesNamhyung Kim
The commit dfef99cd0b2c ("perf probe: Use ref_reloc_sym based address instead of the symbol name") converts kprobes to use ref_reloc_sym (i.e. _stext) and offset instead of using symbol's name directly. So on my system, adding do_fork ends up with like below: $ sudo perf probe -v --add do_fork%return probe-definition(0): do_fork%return symbol:do_fork file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (7 entries long) Using /lib/modules/3.17.6-1-ARCH/build/vmlinux for symbols Could not open debuginfo. Try to use symbols. Opening /sys/kernel/debug/tracing/kprobe_events write=1 Added new event: Writing event: r:probe/do_fork _stext+456136 Failed to write event: Invalid argument Error: Failed to add events. Reason: Operation not permitted (Code: -1) As you can see, the do_fork was translated to _stext+456136. This was because to support (local) symbols that have same name. But the problem is that kretprobe requires to be inserted at function start point so it simply checks whether it's called with offset 0. And if not, it'll return with -EINVAL. You can see it with dmesg. $ dmesg | tail -1 [125621.764103] Return probe must be used without offset. So we need to use the symbol name instead of ref_reloc_sym in case of return probes. Reported-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/1421234288-22758-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf symbols: Introduce 'for' method to iterate over the symbols with a ↵Arnaldo Carvalho de Melo
given name Removing boilerplate from two places, where one would have to find the first entry, then iterate using symbol__next_by_name + strcmp to see if the next member had the same name. Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/n/tip-eh73z8gthv20yowirmx2yk38@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf probe: Do not rely on map__load() filter to find symbolsNamhyung Kim
The find_probe_trace_events_from_map() searches matching symbol from a map (so from a backing dso). For uprobes, it'll create a new map (and dso) and loads it using a filter. It's a little bit inefficient in that it'll read out the symbol table everytime but works well anyway. For kprobes however, it'll reuse existing kernel map which might be loaded before. In this case map__load() just returns with no result. It makes kprobes always failed to find symbol even if it exists in the map (dso). To fix it, use map__find_symbol_by_name() instead. It'll load a map with full symbols and sorts them by name. It needs to search sibing nodes since there can be multiple (local) symbols with same name. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/1421234288-22758-3-git-send-email-namhyung@kernel.org [ Use symbol__next_by_name ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf symbols: Introduce method to iterate symbols ordered by nameArnaldo Carvalho de Melo
Given a symbol, go to the next entry in a rbtree sorted by symbol name. Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/n/tip-aq210drxprnu2so4dye5xa3j@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf symbols: Return the first entry with a given name in find_by_name methodNamhyung Kim
When a dso contains multiple symbols which have same name, current dso__find_symbol_by_name() only finds an one of them and there's no way to get the all symbols without going through the rbtree. So make symbols__find_by_name() return the first entry with the given name and the next patch in this series will provide a way to iterate from there, by the name ordered rb_tree, till a suitable symbol is found. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/1421234288-22758-2-git-send-email-namhyung@kernel.org [ Yanked this independent hunk, without changes, from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf annotate: Fix memory leaks in LOCK handlingRabin Vincent
The lock prefix handling fails to free the strdup()'d name as well as the fields allocated by the instruction parsing. Signed-off-by: Rabin Vincent <rabin@rab.in> Cc: Paul Mackerras <paulus@samba.org> Link: http://lkml.kernel.org/r/1421607621-15005-2-git-send-email-rabin@rab.in Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf annotate: Handle ins parsing failuresRabin Vincent
Don't use the ins's ->sncprintf() if the parsing failed. For example, this fixes the display of "imul %edx". Without this patch: | imul (null),(null) After this patch: | imul %edx Signed-off-by: Rabin Vincent <rabin@rab.in> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1421607621-15005-1-git-send-email-rabin@rab.in Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf scripting perl: Force to use stdboolWang Nan
When building perf for arm64 I hit a warning (and be treated as an error) like below: aarch64-oe-linux-gcc -o .../scripts/perl/Perf-Trace-Util/Context.o -c -Wbad-function-cast \ ... scripts/perl/Perf-Trace-Util/Context.c In file included from .../usr/lib64/perl/5.14.3/CORE/perl.h:2464:0, from Context.xs:23: /.../usr/lib64/perl/5.14.3/CORE/handy.h:108:0: error: "bool" redefined [-Werror] # define bool char ^ In file included from /.../usr/src/kernel/tools/include/linux/types.h:4:0, from /.../usr/src/kernel/arch/arm64/include/uapi/asm/sigcontext.h:19, from /.../usr/include/bits/sigcontext.h:27, from /.../usr/include/signal.h:340, from /.../usr/include/sys/param.h:28, from /.../usr/lib64/perl/5.14.3/CORE/perl.h:678, from Context.xs:23: /.../usr/lib/aarch64-oe-linux/gcc/aarch64-oe-linux/4.9.2/include/stdbool.h:33:0: note: this is the location of the previous definition #define bool _Bool Looks like the failure is caused by arm64 uapi/asm/sigcontext.h, which includes linux/types.h while other archs not. Current perl consider this problem: http://perl5.git.perl.org/perl.git/commit/bd31be4baa3ee68abdb92c0db3200efe0fad903b However there are users which use old version of perl. This patch includes stdbool.h before Context.xs and define HAS_BOOL to prevent perl'e headers define its own 'bool'. Code is learn from perl's git tree. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Link: http://lkml.kernel.org/r/1421671397-4659-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21perf evlist: Remove extraneous 'was' on error messageArnaldo Carvalho de Melo
[acme@mica ~]$ trace -p 3330 Error: Unable to find debugfs Hint: Was your kernel was compiled with debugfs support? ^^^ ^^^ Hint: Is the debugfs filesystem mounted? Hint: Try 'sudo mount -t debugfs nodev /sys/kernel/debug' Fix it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kb9s0xy5z8i51abdu4bgm3rv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-16perf tools powerpc: Use dwfl_report_elf() instead of offline.Sukadev Bhattiprolu
dwfl_report_offline() works only when libraries are prelinked. Replace dwfl_report_offline() with dwfl_report_elf() so we correctly extract debug info even from libraries that are not prelinked. Reported-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Link: http://lkml.kernel.org/r/20150114221045.GA17703@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-16perf tools: Fix segfault for symbol annotation on TUINamhyung Kim
Currently the symbol structure is allocated with symbol_conf.priv_size to carry sideband information like annotation, map browser on TUI and sort-by-name tree node. So retrieving these information from symbol needs to care about the details of such placement. However the annotation code just assumes that the symbol is placed after the struct annotation. But actually there's other info between them. So accessing those struct will lead to an undefined behavior (usually a crash) after they write their info to the same location. To reproduce the problem, please follow the steps below: 1. run perf report (TUI of course) with -v option 2. open map browser (by pressing right arrow key for any entry) 3. search any function (by pressing '/' key and input whatever..) 4. return to the hist browser (by pressing 'q' or left arrow key) 5. open annotation window for the same entry (by pressing 'a' key) Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1421234288-22758-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-16perf test: Fix dwarf unwind using libunwind.Wang Nan
Perf tool fails to unwind user stack if the event raises in a shared object. This patch improves tests/dwarf-unwind.c to demonstrate the problem by utilizing commonly used glibc function "bsearch". If perf is not statically linked, the testcase will try to unwind a mixed call trace. By debugging libunwind I found that there is a bug in unwind-libunwind: it always passes 0 as segbase to libunwind, cause libunwind unable to locate debug_frame entry fir first level ip address (I add some more debugging output into libunwind to make things clear): >_Uarm_dwarf_find_debug_frame: start_ip = 10be98, end_ip = 10c2a4 >_Uarm_dwarf_find_debug_frame: found debug_frame table `/lib/libc-2.18.so': segbase=0x0, len=7, gp=0x0, table_data=0x449388 >_Uarm_dwarf_search_unwind_table: call lookup:ip = b6cd3bcc, segbase = 0, rel_ip = b6cd3bcc >lookup: e->start_ip_offset = bcf18 (rel_ip = b6cd3bcc) >lookup: e->start_ip_offset = 6d314 (rel_ip = b6cd3bcc) >lookup: e->start_ip_offset = 33d0c (rel_ip = b6cd3bcc) ... >lookup: e->start_ip_offset = 15d0c (rel_ip = b6cd3bcc) >lookup: e->start_ip_offset = 15c40 (rel_ip = b6cd3bcc) >_Uarm_dwarf_search_unwind_table: IP b6cd3bcc inside range b6c12000-b6d4c000, but no explicit unwind info found >put_rs_cache: unmasking signals/interrupts and releasing lock >_Uarm_dwarf_step: returning -10 >_Uarm_step: dwarf_step()=-10 This patch passes map->start as segbase to dwarf_find_debug_frame(), so di will be initialized correctly. In addition, dso and executable are different when setting segbase. This patch first check whether the elf is executable, and pass segbase only for shared object. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1421203007-75799-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-16perf tools: Avoid build splat for syscall numbers with uclibcVineet Gupta
This is due to duplicated unistd inclusion (via uClibc headers + kernel headers) Also seen on ARM uClibc based tools ------- ARC build ---------->8------------- CC util/evlist.o In file included from ~/arc/k.org/arch/arc/include/uapi/asm/unistd.h:25:0, from util/../perf-sys.h:10, from util/../perf.h:15, from util/event.h:7, from util/event.c:3: ~/arc/k.org/include/uapi/asm-generic/unistd.h:906:0: warning: "__NR_fcntl64" redefined [enabled by default] #define __NR_fcntl64 __NR3264_fcntl ^ In file included from ~/arc/gnu/INSTALL_1412-arc-2014.12-rc1/arc-snps-linux-uclibc/sysroot/usr/include/sys/syscall.h:24:0, from util/../perf-sys.h:6, ----------------->8------------------- ------- ARM build ---------->8------------- CC FPIC plugin_scsi.o In file included from util/../perf-sys.h:9:0, from util/../perf.h:15, from util/cache.h:7, from perf.c:12: ~/arc/k.org/arch/arm/include/uapi/asm/unistd.h:28:0: warning: "__NR_restart_syscall" redefined [enabled by default] In file included from ~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/sys/syscall.h:25:0, from util/../perf-sys.h:6, from util/../perf.h:15, from util/cache.h:7, from perf.c:12: ~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/bits/sysnum.h:17:0: note: this is the location of the previous definition ----------------->8------------------- Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1421156604-30603-4-git-send-email-vgupta@synopsys.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-16perf tools: Elide strlcpy warning with uclibcVineet Gupta
----------------->8------------------ CC bench/sched-pipe.o In file included from builtin-annotate.c:13:0: util/cache.h:76:15: warning: redundant redeclaration of 'strlcpy' [-Wredundant-decls] extern size_t strlcpy(char *dest, const char *src, size_t size); ^ In file included from util/util.h:55:0, from builtin.h:4, from builtin-annotate.c:8: ~/vineetg/arc/gnu/INSTALL_1412-arc-2014.12-rc1/arc-snps-linux-uclibc/sysroot/usr/include/string.h:396:15: note: previous declaration of 'strlcpy' was here extern size_t strlcpy(char *__restrict dst, const char *__restrict src, ----------------->8------------------ Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1421156604-30603-3-git-send-email-vgupta@synopsys.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-16perf tools: Fix statfs.f_type data type mismatch build error with uclibcAlexey Brodkin
ARC Linux uses the no legacy syscalls abi and corresponding uClibc headers statfs defines f_type to be U32 which causes perf build breakage http://git.uclibc.org/uClibc/tree/libc/sysdeps/linux/common-generic/bits/statfs.h ----------->8--------------- CC fs/fs.o fs/fs.c: In function 'fs__valid_mount': fs/fs.c:82:24: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] else if (st_fs.f_type != magic) ^ cc1: all warnings being treated as errors ----------->8--------------- Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Cody P Schafer <dev@codyps.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Link: http://lkml.kernel.org/r/1420888254-17504-2-git-send-email-vgupta@synopsys.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-16tools: Remove bitops/hweight usage of bits in tools/perfArnaldo Carvalho de Melo
We need to use lib/hweight.c for that, just like we do for lib/rbtree.c, so tools need to link hweight.o. For now do it directly, but we need to have a tools/lib/lk.a or .so that collects these goodies... Reported-by: Jan Beulich <JBeulich@suse.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a1e91dx3apzqw5kbdt7ut21s@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-16perf machine: Fix __machine__findnew_thread() error pathNamhyung Kim
When thread__init_map_groups() fails, a new thread should be removed from the rbtree since it's gonna be freed. Also update last match cache only if the function succeeded. Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420763892-15535-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-16perf tools: Fix building error in x86_64 when dwarf unwind is onNamhyung Kim
When build with 'make ARCH=x86' and dwarf unwind is on, there is a compiling error: CC /home/wn/perf/arch/x86/util/unwind-libdw.o CC /home/wn/perf/arch/x86/tests/regs_load.o arch/x86/tests/regs_load.S: Assembler messages: arch/x86/tests/regs_load.S:65: Error: operand type mismatch for `push' arch/x86/tests/regs_load.S:72: Error: operand type mismatch for `pop' make[1]: *** [/home/wn/perf/arch/x86/tests/regs_load.o] Error 1 make[1]: INTERNAL: Exiting with 25 jobserver tokens available; should be 24! make: *** [all] Error 2 ... Which is caused by incorrectly undefine macro HAVE_ARCH_X86_64_SUPPORT. 'config/Makefile.arch' tests __x86_64__ only when 'ARCH=x86_64'. However, when building x86_64 kernel, ARCH=x86 is valid and commonly used. Build systems, such as yocto, uses x86_64 compiler with 'ARCH=x86' to build x86_64 perf, which causes mismatching. As __LP64__ is defined for x86_64 as well, we can consolidate the __x86_64__ check to the __LP64__ check and get rid of the IS_X86_64 IMHO. (This patch is made by Namhyung Kim when replying my v1 patch: https://lkml.org/lkml/2015/1/7/17 I modified the code to remove dependency on RAW_ARCH: https://lkml.org/lkml/2015/1/7/865 Namhyung Kim didn't provide his SOB in his original email. I add mine only for my modification.) Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1421029255-23039-1-git-send-email-wangnan0@huawei.com [ Namhyung provided his S-o-B on a followup to this patch thread on lkml ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-16perf probe: Propagate error code when write(2) failedNamhyung Kim
When it failed to write probe commands to the probe_event file in debugfs, it needs to propagate the error code properly. Current code blindly uses the return value of the write(2) so it always uses -1 (-EPERM) and it might confuse users. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420886028-15135-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 17:28:15 +0000