summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2020-04-26objtool: Fix infinite loop in for_offset_range()Josh Poimboeuf
Randy reported that objtool got stuck in an infinite loop when processing drivers/i2c/busses/i2c-parport.o. It was caused by the following code: 00000000000001fd <line_set>: 1fd: 48 b8 00 00 00 00 00 movabs $0x0,%rax 204: 00 00 00 1ff: R_X86_64_64 .rodata-0x8 207: 41 55 push %r13 209: 41 89 f5 mov %esi,%r13d 20c: 41 54 push %r12 20e: 49 89 fc mov %rdi,%r12 211: 55 push %rbp 212: 48 89 d5 mov %rdx,%rbp 215: 53 push %rbx 216: 0f b6 5a 01 movzbl 0x1(%rdx),%ebx 21a: 48 8d 34 dd 00 00 00 lea 0x0(,%rbx,8),%rsi 221: 00 21e: R_X86_64_32S .rodata 222: 48 89 f1 mov %rsi,%rcx 225: 48 29 c1 sub %rax,%rcx find_jump_table() saw the .rodata reference and tried to find a jump table associated with it (though there wasn't one). The -0x8 rela addend is unusual. It caused find_jump_table() to send a negative table_offset (unsigned 0xfffffffffffffff8) to find_rela_by_dest(). The negative offset should have been harmless, but it actually threw for_offset_range() for a loop... literally. When the mask value got incremented past the end value, it also wrapped to zero, causing the loop exit condition to remain true forever. Prevent this scenario from happening by ensuring the incremented value is always >= the starting value. Fixes: 74b873e49d92 ("objtool: Optimize find_rela_by_dest_range()") Reported-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Julien Thierry <jthierry@redhat.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/02b719674b031800b61e33c30b2e823183627c19.1587842122.git.jpoimboe@redhat.com
2020-04-25objtool: Fix stack offset tracking for indirect CFAsJosh Poimboeuf
When the current frame address (CFA) is stored on the stack (i.e., cfa->base == CFI_SP_INDIRECT), objtool neglects to adjust the stack offset when there are subsequent pushes or pops. This results in bad ORC data at the end of the ENTER_IRQ_STACK macro, when it puts the previous stack pointer on the stack and does a subsequent push. This fixes the following unwinder warning: WARNING: can't dereference registers at 00000000f0a6bdba for ip interrupt_entry+0x9f/0xa0 Fixes: 627fce14809b ("objtool: Add ORC unwind table generation") Reported-by: Vince Weaver <vincent.weaver@maine.edu> Reported-by: Dave Jones <dsj@fb.com> Reported-by: Steven Rostedt <rostedt@goodmis.org> Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Reported-by: Joe Mario <jmario@redhat.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/853d5d691b29e250333332f09b8e27410b2d9924.1587808742.git.jpoimboe@redhat.com
2020-04-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix memory leak in netfilter flowtable, from Roi Dayan. 2) Ref-count leaks in netrom and tipc, from Xiyu Yang. 3) Fix warning when mptcp socket is never accepted before close, from Florian Westphal. 4) Missed locking in ovs_ct_exit(), from Tonghao Zhang. 5) Fix large delays during PTP synchornization in cxgb4, from Rahul Lakkireddy. 6) team_mode_get() can hang, from Taehee Yoo. 7) Need to use kvzalloc() when allocating fw tracer in mlx5 driver, from Niklas Schnelle. 8) Fix handling of bpf XADD on BTF memory, from Jann Horn. 9) Fix BPF_STX/BPF_B encoding in x86 bpf jit, from Luke Nelson. 10) Missing queue memory release in iwlwifi pcie code, from Johannes Berg. 11) Fix NULL deref in macvlan device event, from Taehee Yoo. 12) Initialize lan87xx phy correctly, from Yuiko Oshino. 13) Fix looping between VRF and XFRM lookups, from David Ahern. 14) etf packet scheduler assumes all sockets are full sockets, which is not necessarily true. From Eric Dumazet. 15) Fix mptcp data_fin handling in RX path, from Paolo Abeni. 16) fib_select_default() needs to handle nexthop objects, from David Ahern. 17) Use GFP_ATOMIC under spinlock in mac80211_hwsim, from Wei Yongjun. 18) vxlan and geneve use wrong nlattr array, from Sabrina Dubroca. 19) Correct rx/tx stats in bcmgenet driver, from Doug Berger. 20) BPF_LDX zero-extension is encoded improperly in x86_32 bpf jit, fix from Luke Nelson. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (100 commits) selftests/bpf: Fix a couple of broken test_btf cases tools/runqslower: Ensure own vmlinux.h is picked up first bpf: Make bpf_link_fops static bpftool: Respect the -d option in struct_ops cmd selftests/bpf: Add test for freplace program with expected_attach_type bpf: Propagate expected_attach_type when verifying freplace programs bpf: Fix leak in LINK_UPDATE and enforce empty old_prog_fd bpf, x86_32: Fix logic error in BPF_LDX zero-extension bpf, x86_32: Fix clobbering of dst for BPF_JSET bpf, x86_32: Fix incorrect encoding in BPF_LDX zero-extension bpf: Fix reStructuredText markup net: systemport: suppress warnings on failed Rx SKB allocations net: bcmgenet: suppress warnings on failed Rx SKB allocations macsec: avoid to set wrong mtu mac80211: sta_info: Add lockdep condition for RCU list usage mac80211: populate debugfs only after cfg80211 init net: bcmgenet: correct per TX/RX ring statistics net: meth: remove spurious copyright text net: phy: bcm84881: clear settings on link down chcr: Fix CPU hard lockup ...
2020-04-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf 2020-04-24 The following pull-request contains BPF updates for your *net* tree. We've added 17 non-merge commits during the last 5 day(s) which contain a total of 19 files changed, 203 insertions(+), 85 deletions(-). The main changes are: 1) link_update fix, from Andrii. 2) libbpf get_xdp_id fix, from David. 3) xadd verifier fix, from Jann. 4) x86-32 JIT fixes, from Luke and Wang. 5) test_btf fix, from Stanislav. 6) freplace verifier fix, from Toke. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-24selftests/bpf: Fix a couple of broken test_btf casesStanislav Fomichev
Commit 51c39bb1d5d1 ("bpf: Introduce function-by-function verification") introduced function linkage flag and changed the error message from "vlen != 0" to "Invalid func linkage" and broke some fake BPF programs. Adjust the test accordingly. AFACT, the programs don't really need any arguments and only look at BTF for maps, so let's drop the args altogether. Before: BTF raw test[103] (func (Non zero vlen)): do_test_raw:3703:FAIL expected err_str:vlen != 0 magic: 0xeb9f version: 1 flags: 0x0 hdr_len: 24 type_off: 0 type_len: 72 str_off: 72 str_len: 10 btf_total_size: 106 [1] INT (anon) size=4 bits_offset=0 nr_bits=32 encoding=SIGNED [2] INT (anon) size=4 bits_offset=0 nr_bits=32 encoding=(none) [3] FUNC_PROTO (anon) return=0 args=(1 a, 2 b) [4] FUNC func type_id=3 Invalid func linkage BTF libbpf test[1] (test_btf_haskv.o): libbpf: load bpf program failed: Invalid argument libbpf: -- BEGIN DUMP LOG --- libbpf: Validating test_long_fname_2() func#1... Arg#0 type PTR in test_long_fname_2() is not supported yet. processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0 libbpf: -- END LOG -- libbpf: failed to load program 'dummy_tracepoint' libbpf: failed to load object 'test_btf_haskv.o' do_test_file:4201:FAIL bpf_object__load: -4007 BTF libbpf test[2] (test_btf_newkv.o): libbpf: load bpf program failed: Invalid argument libbpf: -- BEGIN DUMP LOG --- libbpf: Validating test_long_fname_2() func#1... Arg#0 type PTR in test_long_fname_2() is not supported yet. processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0 libbpf: -- END LOG -- libbpf: failed to load program 'dummy_tracepoint' libbpf: failed to load object 'test_btf_newkv.o' do_test_file:4201:FAIL bpf_object__load: -4007 BTF libbpf test[3] (test_btf_nokv.o): libbpf: load bpf program failed: Invalid argument libbpf: -- BEGIN DUMP LOG --- libbpf: Validating test_long_fname_2() func#1... Arg#0 type PTR in test_long_fname_2() is not supported yet. processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0 libbpf: -- END LOG -- libbpf: failed to load program 'dummy_tracepoint' libbpf: failed to load object 'test_btf_nokv.o' do_test_file:4201:FAIL bpf_object__load: -4007 Fixes: 51c39bb1d5d1 ("bpf: Introduce function-by-function verification") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200422003753.124921-1-sdf@google.com
2020-04-24tools/runqslower: Ensure own vmlinux.h is picked up firstAndrii Nakryiko
Reorder include paths to ensure that runqslower sources are picking up vmlinux.h, generated by runqslower's own Makefile. When runqslower is built from selftests/bpf, due to current -I$(BPF_INCLUDE) -I$(OUTPUT) ordering, it might pick up not-yet-complete vmlinux.h, generated by selftests Makefile, which could lead to compilation errors like [0]. So ensure that -I$(OUTPUT) goes first and rely on runqslower's Makefile own dependency chain to ensure vmlinux.h is properly completed before source code relying on it is compiled. [0] https://travis-ci.org/github/libbpf/libbpf/jobs/677905925 Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200422012407.176303-1-andriin@fb.com
2020-04-24bpftool: Respect the -d option in struct_ops cmdMartin KaFai Lau
In the prog cmd, the "-d" option turns on the verifier log. This is missed in the "struct_ops" cmd and this patch fixes it. Fixes: 65c93628599d ("bpftool: Add struct_ops support") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20200424182911.1259355-1-kafai@fb.com
2020-04-24selftests/bpf: Add test for freplace program with expected_attach_typeToke Høiland-Jørgensen
This adds a new selftest that tests the ability to attach an freplace program to a program type that relies on the expected_attach_type of the target program to pass verification. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/158773526831.293902.16011743438619684815.stgit@toke.dk
2020-04-24bpf: Fix reStructuredText markupJakub Wilk
The patch fixes: $ scripts/bpf_helpers_doc.py > bpf-helpers.rst $ rst2man bpf-helpers.rst > bpf-helpers.7 bpf-helpers.rst:1105: (WARNING/2) Inline strong start-string without end-string. Signed-off-by: Jakub Wilk <jwilk@jwilk.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20200422082324.2030-1-jwilk@jwilk.net
2020-04-24Merge tag 'pm-5.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Restore an optimization related to asynchronous suspend and resume of devices during system-wide power transitions that was disabled by mistake (Kai-Heng Feng) and update the pm-graph suite of power management utilities (Todd Brandt)" * tag 'pm-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: sleep: core: Switch back to async_schedule_dev() pm-graph v5.6
2020-04-22libbpf: Only check mode flags in get_xdp_idDavid Ahern
The commit in the Fixes tag changed get_xdp_id to only return prog_id if flags is 0, but there are other XDP flags than the modes - e.g., XDP_FLAGS_UPDATE_IF_NOEXIST. Since the intention was only to look at MODE flags, clear other ones before checking if flags is 0. Fixes: f07cbad29741 ("libbpf: Fix bpf_get_link_xdp_id flags handling") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrey Ignatov <rdna@fb.com>
2020-04-22ipv4: Update fib_select_default to handle nexthop objectsDavid Ahern
A user reported [0] hitting the WARN_ON in fib_info_nh: [ 8633.839816] ------------[ cut here ]------------ [ 8633.839819] WARNING: CPU: 0 PID: 1719 at include/net/nexthop.h:251 fib_select_path+0x303/0x381 ... [ 8633.839846] RIP: 0010:fib_select_path+0x303/0x381 ... [ 8633.839848] RSP: 0018:ffffb04d407f7d00 EFLAGS: 00010286 [ 8633.839850] RAX: 0000000000000000 RBX: ffff9460b9897ee8 RCX: 00000000000000fe [ 8633.839851] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: 0000000000000000 [ 8633.839852] RBP: ffff946076049850 R08: 0000000059263a83 R09: ffff9460840e4000 [ 8633.839853] R10: 0000000000000014 R11: 0000000000000000 R12: ffffb04d407f7dc0 [ 8633.839854] R13: ffffffffa4ce3240 R14: 0000000000000000 R15: ffff9460b7681f60 [ 8633.839857] FS: 00007fcac2e02700(0000) GS:ffff9460bdc00000(0000) knlGS:0000000000000000 [ 8633.839858] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8633.839859] CR2: 00007f27beb77e28 CR3: 0000000077734000 CR4: 00000000000006f0 [ 8633.839867] Call Trace: [ 8633.839871] ip_route_output_key_hash_rcu+0x421/0x890 [ 8633.839873] ip_route_output_key_hash+0x5e/0x80 [ 8633.839876] ip_route_output_flow+0x1a/0x50 [ 8633.839878] __ip4_datagram_connect+0x154/0x310 [ 8633.839880] ip4_datagram_connect+0x28/0x40 [ 8633.839882] __sys_connect+0xd6/0x100 ... The WARN_ON is triggered in fib_select_default which is invoked when there are multiple default routes. Update the function to use fib_info_nhc and convert the nexthop checks to use fib_nh_common. Add test case that covers the affected code path. [0] https://github.com/FRRouting/frr/issues/6089 Fixes: 493ced1ac47c ("ipv4: Allow routes to use nexthop objects") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22selftests: Fix suppress test in fib_tests.shDavid Ahern
fib_tests is spewing errors: ... Cannot open network namespace "ns1": No such file or directory Cannot open network namespace "ns1": No such file or directory Cannot open network namespace "ns1": No such file or directory Cannot open network namespace "ns1": No such file or directory ping: connect: Network is unreachable Cannot open network namespace "ns1": No such file or directory Cannot open network namespace "ns1": No such file or directory ... Each test entry in fib_tests is supposed to do its own setup and cleanup. Right now the $IP commands in fib_suppress_test are failing because there is no ns1. Add the setup/cleanup and logging expected for each test. Fixes: ca7a03c41753 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule") Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-22Merge tag 'linux-kselftest-5.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "This consists of fixes to runner scripts and individual test run-time bugs. Includes fixes to tpm2 and memfd test run-time regressions" * tag 'linux-kselftest-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/ipc: Fix test failure seen after initial test run Revert "Kernel selftests: tpm2: check for tpm support" selftests/ftrace: Add CONFIG_SAMPLE_FTRACE_DIRECT=m kconfig selftests/seccomp: allow clock_nanosleep instead of nanosleep kselftest/runner: allow to properly deliver signals to tests selftests/harness: fix spelling mistake "SIGARLM" -> "SIGALRM" selftests: Fix memfd test run-time regression selftests: vm: Fix 64-bit test builds for powerpc64le selftests: vm: Do not override definition of ARCH
2020-04-21Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "15 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: tools/vm: fix cross-compile build coredump: fix null pointer dereference on coredump mm: shmem: disable interrupt when acquiring info->lock in userfaultfd_copy path shmem: fix possible deadlocks on shmlock_user_lock vmalloc: fix remap_vmalloc_range() bounds checks mm/shmem: fix build without THP mm/ksm: fix NULL pointer dereference when KSM zero page is enabled tools/build: tweak unused value workaround checkpatch: fix a typo in the regex for $allocFunctions mm, gup: return EINTR when gup is interrupted by fatal signals mm/hugetlb: fix a addressing exception caused by huge_pte_offset MAINTAINERS: add an entry for kfifo mm/userfaultfd: disable userfaultfd-wp on x86_32 slub: avoid redzone when choosing freepointer location sh: fix build error in mm/init.c
2020-04-21Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio fixes and cleanups from Michael Tsirkin: - Some bug fixes - Cleanup a couple of issues that surfaced meanwhile - Disable vhost on ARM with OABI for now - to be fixed fully later in the cycle or in the next release. * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (24 commits) vhost: disable for OABI virtio: drop vringh.h dependency virtio_blk: add a missing include virtio-balloon: Avoid using the word 'report' when referring to free page hinting virtio-balloon: make virtballoon_free_page_report() static vdpa: fix comment of vdpa_register_device() vdpa: make vhost, virtio depend on menu vdpa: allow a 32 bit vq alignment drm/virtio: fix up for include file changes remoteproc: pull in slab.h rpmsg: pull in slab.h virtio_input: pull in slab.h remoteproc: pull in slab.h virtio-rng: pull in slab.h virtgpu: pull in uaccess.h tools/virtio: make asm/barrier.h self contained tools/virtio: define aligned attribute virtio/test: fix up after IOTLB changes vhost: Create accessors for virtqueues private_data vdpasim: Return status in vdpasim_get_status ...
2020-04-21tools/vm: fix cross-compile buildLucas Stach
Commit 7ed1c1901fe5 ("tools: fix cross-compile var clobbering") moved the setup of the CC variable to tools/scripts/Makefile.include to make the behavior consistent across all the tools Makefiles. As the vm tools missed the include we end up with the wrong CC in a cross-compiling evironment. Fixes: 7ed1c1901fe5 (tools: fix cross-compile var clobbering) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Martin Kelly <martin@martingkelly.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200416104748.25243-1-l.stach@pengutronix.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-21tools/build: tweak unused value workaroundGeorge Burgess IV
Clang has -Wself-assign enabled by default under -Wall, which always gets -Werror'ed on this file, causing sync-compare-and-swap to be disabled by default. The generally-accepted way to spell "this value is intentionally unused," is casting it to `void`. This is accepted by both GCC and Clang with -Wall enabled: https://godbolt.org/z/qqZ9r3 Signed-off-by: George Burgess IV <gbiv@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Link: http://lkml.kernel.org/r/20200414195638.156123-1-gbiv@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-20bpf, selftests: Add test for BPF_STX BPF_B storing R10Luke Nelson
This patch adds a test to test_verifier that writes the lower 8 bits of R10 (aka FP) using BPF_B to an array map and reads the result back. The expected behavior is that the result should be the same as first copying R10 to R9, and then storing / loading the lower 8 bits of R9. This test catches a bug that was present in the x86-64 JIT that caused an incorrect encoding for BPF_STX BPF_B when the source operand is R10. Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Luke Nelson <luke.r.nels@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200418232655.23870-2-luke.r.nels@gmail.com
2020-04-20bpf: Forbid XADD on spilled pointers for unprivileged usersJann Horn
When check_xadd() verifies an XADD operation on a pointer to a stack slot containing a spilled pointer, check_stack_read() verifies that the read, which is part of XADD, is valid. However, since the placeholder value -1 is passed as `value_regno`, check_stack_read() can only return a binary decision and can't return the type of the value that was read. The intent here is to verify whether the value read from the stack slot may be used as a SCALAR_VALUE; but since check_stack_read() doesn't check the type, and the type information is lost when check_stack_read() returns, this is not enforced, and a malicious user can abuse XADD to leak spilled kernel pointers. Fix it by letting check_stack_read() verify that the value is usable as a SCALAR_VALUE if no type information is passed to the caller. To be able to use __is_pointer_value() in check_stack_read(), move it up. Fix up the expected unprivileged error message for a BPF selftest that, until now, assumed that unprivileged users can use XADD on stack-spilled pointers. This also gives us a test for the behavior introduced in this patch for free. In theory, this could also be fixed by forbidding XADD on stack spills entirely, since XADD is a locked operation (for operations on memory with concurrency) and there can't be any concurrency on the BPF stack; but Alexei has said that he wants to keep XADD on stack slots working to avoid changes to the test suite [1]. The following BPF program demonstrates how to leak a BPF map pointer as an unprivileged user using this bug: // r7 = map_pointer BPF_LD_MAP_FD(BPF_REG_7, small_map), // r8 = launder(map_pointer) BPF_STX_MEM(BPF_DW, BPF_REG_FP, BPF_REG_7, -8), BPF_MOV64_IMM(BPF_REG_1, 0), ((struct bpf_insn) { .code = BPF_STX | BPF_DW | BPF_XADD, .dst_reg = BPF_REG_FP, .src_reg = BPF_REG_1, .off = -8 }), BPF_LDX_MEM(BPF_DW, BPF_REG_8, BPF_REG_FP, -8), // store r8 into map BPF_MOV64_REG(BPF_REG_ARG1, BPF_REG_7), BPF_MOV64_REG(BPF_REG_ARG2, BPF_REG_FP), BPF_ALU64_IMM(BPF_ADD, BPF_REG_ARG2, -4), BPF_ST_MEM(BPF_W, BPF_REG_ARG2, 0, 0), BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem), BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1), BPF_EXIT_INSN(), BPF_STX_MEM(BPF_DW, BPF_REG_0, BPF_REG_8, 0), BPF_MOV64_IMM(BPF_REG_0, 0), BPF_EXIT_INSN() [1] https://lore.kernel.org/bpf/20200416211116.qxqcza5vo2ddnkdq@ast-mbp.dhcp.thefacebook.com/ Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200417000007.10734-1-jannh@google.com
2020-04-20pm-graph v5.6Todd Brandt
sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-19Merge tag 'x86-urgent-2020-04-19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 and objtool fixes from Thomas Gleixner: "A set of fixes for x86 and objtool: objtool: - Ignore the double UD2 which is emitted in BUG() when CONFIG_UBSAN_TRAP is enabled. - Support clang non-section symbols in objtool ORC dump - Fix switch table detection in .text.unlikely - Make the BP scratch register warning more robust. x86: - Increase microcode maximum patch size for AMD to cope with new CPUs which have a larger patch size. - Fix a crash in the resource control filesystem when the removal of the default resource group is attempted. - Preserve Code and Data Prioritization enabled state accross CPU hotplug. - Update split lock cpu matching to use the new X86_MATCH macros. - Change the split lock enumeration as Intel finaly decided that the IA32_CORE_CAPABILITIES bits are not architectural contrary to what the SDM claims. !@#%$^! - Add Tremont CPU models to the split lock detection cpu match. - Add a missing static attribute to make sparse happy" * tag 'x86-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/split_lock: Add Tremont family CPU models x86/split_lock: Bits in IA32_CORE_CAPABILITIES are not architectural x86/resctrl: Preserve CDP enable over CPU hotplug x86/resctrl: Fix invalid attempt at removing the default resource group x86/split_lock: Update to use X86_MATCH_INTEL_FAM6_MODEL() x86/umip: Make umip_insns static x86/microcode/AMD: Increase microcode PATCH_MAX_SIZE objtool: Make BP scratch register warning more robust objtool: Fix switch table detection in .text.unlikely objtool: Support Clang non-section symbols in ORC generation objtool: Support Clang non-section symbols in ORC dump objtool: Fix CONFIG_UBSAN_TRAP unreachable warnings
2020-04-19Merge tag 'perf-urgent-2020-04-19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling fixes and updates from Thomas Gleixner: - Fix the header line of perf stat output for '--metric-only --per-socket' - Fix the python build with clang - The usual tools UAPI header synchronization * tag 'perf-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools headers: Synchronize linux/bits.h with the kernel sources tools headers: Adopt verbatim copy of compiletime_assert() from kernel sources tools headers: Update x86's syscall_64.tbl with the kernel sources tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Update tools's copy of drm.h headers tools headers kvm: Sync linux/kvm.h with the kernel sources tools headers UAPI: Sync linux/fscrypt.h with the kernel sources tools include UAPI: Sync linux/vhost.h with the kernel sources tools arch x86: Sync asm/cpufeatures.h with the kernel sources tools headers UAPI: Sync linux/mman.h with the kernel tools headers UAPI: Sync sched.h with the kernel tools headers: Update linux/vdso.h and grab a copy of vdso/const.h perf stat: Fix no metric header if --per-socket and --metric-only set perf python: Check if clang supports -fno-semantic-interposition tools arch x86: Sync the msr-index.h copy with the kernel sources
2020-04-17tools/virtio: make asm/barrier.h self containedMichael S. Tsirkin
We are using abort() so let's include stdlib.h Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-04-17tools/virtio: define aligned attributeMichael S. Tsirkin
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-04-16virtio/test: fix up after IOTLB changesMichael S. Tsirkin
Allow building vringh without IOTLB (that's the case for userspace builds, will be useful for CAIF/VOD down the road too). Update for API tweaks. Don't include vringh with userspace builds. Cc: Jason Wang <jasowang@redhat.com> Cc: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2020-04-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Disable RISCV BPF JIT builds when !MMU, from Björn Töpel. 2) nf_tables leaves dangling pointer after free, fix from Eric Dumazet. 3) Out of boundary write in __xsk_rcv_memcpy(), fix from Li RongQing. 4) Adjust icmp6 message source address selection when routes have a preferred source address set, from Tim Stallard. 5) Be sure to validate HSR protocol version when creating new links, from Taehee Yoo. 6) CAP_NET_ADMIN should be sufficient to manage l2tp tunnels even in non-initial namespaces, from Michael Weiß. 7) Missing release firmware call in mlx5, from Eran Ben Elisha. 8) Fix variable type in macsec_changelink(), caught by KASAN. Fix from Taehee Yoo. 9) Fix pause frame negotiation in marvell phy driver, from Clemens Gruber. 10) Record RX queue early enough in tun packet paths such that XDP programs will see the correct RX queue index, from Gilberto Bertin. 11) Fix double unlock in mptcp, from Florian Westphal. 12) Fix offset overflow in ARM bpf JIT, from Luke Nelson. 13) marvell10g needs to soft reset PHY when coming out of low power mode, from Russell King. 14) Fix MTU setting regression in stmmac for some chip types, from Florian Fainelli. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits) amd-xgbe: Use __napi_schedule() in BH context mISDN: make dmril and dmrim static net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode tipc: fix incorrect increasing of link window Documentation: Fix tcp_challenge_ack_limit default value net: tulip: make early_486_chipsets static dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400 ipv6: remove redundant assignment to variable err net/rds: Use ERR_PTR for rds_message_alloc_sgs() net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge selftests/bpf: Check for correct program attach/detach in xdp_attach test libbpf: Fix type of old_fd in bpf_xdp_set_link_opts libbpf: Always specify expected_attach_type on program load if supported xsk: Add missing check on user supplied headroom size mac80211: fix channel switch trigger from unknown mesh peer mac80211: fix race in ieee80211_register_hw() net: marvell10g: soft-reset the PHY when coming out of low power net: marvell10g: report firmware version net/cxgb4: Check the return from t4_query_params properly ...
2020-04-15selftests/bpf: Check for correct program attach/detach in xdp_attach testToke Høiland-Jørgensen
David Ahern noticed that there was a bug in the EXPECTED_FD code so programs did not get detached properly when that parameter was supplied. This case was not included in the xdp_attach tests; so let's add it to be sure that such a bug does not sneak back in down. Fixes: 87854a0b57b3 ("selftests/bpf: Add tests for attaching XDP programs") Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200414145025.182163-2-toke@redhat.com
2020-04-15libbpf: Fix type of old_fd in bpf_xdp_set_link_optsToke Høiland-Jørgensen
The 'old_fd' parameter used for atomic replacement of XDP programs is supposed to be an FD, but was left as a u32 from an earlier iteration of the patch that added it. It was converted to an int when read, so things worked correctly even with negative values, but better change the definition to correctly reflect the intention. Fixes: bd5ca3ef93cd ("libbpf: Add function to set link XDP fd while specifying old program") Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: David Ahern <dsahern@gmail.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200414145025.182163-1-toke@redhat.com
2020-04-15libbpf: Always specify expected_attach_type on program load if supportedAndrii Nakryiko
For some types of BPF programs that utilize expected_attach_type, libbpf won't set load_attr.expected_attach_type, even if expected_attach_type is known from section definition. This was done to preserve backwards compatibility with old kernels that didn't recognize expected_attach_type attribute yet (which was added in 5e43f899b03a ("bpf: Check attach type at prog load time"). But this is problematic for some BPF programs that utilize newer features that require kernel to know specific expected_attach_type (e.g., extended set of return codes for cgroup_skb/egress programs). This patch makes libbpf specify expected_attach_type by default, but also detect support for this field in kernel and not set it during program load. This allows to have a good metadata for bpf_program (e.g., bpf_program__get_extected_attach_type()), but still work with old kernels (for cases where it can work at all). Additionally, due to expected_attach_type being always set for recognized program types, bpf_program__attach_cgroup doesn't have to do extra checks to determine correct attach type, so remove that additional logic. Also adjust section_names selftest to account for this change. More detailed discussion can be found in [0]. [0] https://lore.kernel.org/bpf/20200412003604.GA15986@rdna-mbp.dhcp.thefacebook.com/ Fixes: 5cf1e9145630 ("bpf: cgroup inet skb programs can return 0 to 3") Fixes: 5e43f899b03a ("bpf: Check attach type at prog load time") Reported-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Andrey Ignatov <rdna@fb.com> Link: https://lore.kernel.org/bpf/20200414182645.1368174-1-andriin@fb.com
2020-04-14tools, bpftool: Fix struct_ops command invalid pointer freeDaniel T. Lee
In commit 65c93628599d ("bpftool: Add struct_ops support") a new type of command named struct_ops has been added. This command requires a kernel with CONFIG_DEBUG_INFO_BTF=y set and for retrieving BTF info in bpftool, the helper get_btf_vmlinux() is used. When running this command on kernel without BTF debug info, this will lead to 'btf_vmlinux' variable being an invalid(error) pointer. And by this, btf_free() causes a segfault when executing 'bpftool struct_ops'. This commit adds pointer validation with IS_ERR not to free invalid pointer, and this will fix the segfault issue. Fixes: 65c93628599d ("bpftool: Add struct_ops support") Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200410020612.2930667-1-danieltimlee@gmail.com
2020-04-14selftests/bpf: Validate frozen map contents stays frozenAndrii Nakryiko
Test that frozen and mmap()'ed BPF map can't be mprotect()'ed as writable or executable memory. Also validate that "downgrading" from writable to read-only doesn't screw up internal writable count accounting for the purposes of map freezing. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200410202613.3679837-2-andriin@fb.com
2020-04-14selftests/ipc: Fix test failure seen after initial test runTyler Hicks
After successfully running the IPC msgque test once, subsequent runs result in a test failure: $ sudo ./run_kselftest.sh TAP version 13 1..1 # selftests: ipc: msgque # Failed to get stats for IPC queue with id 0 # Failed to dump queue: -22 # Bail out! # # Pass 0 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0 not ok 1 selftests: ipc: msgque # exit=1 The dump_queue() function loops through the possible message queue index values using calls to msgctl(kern_id, MSG_STAT, ...) where kern_id represents the index value. The first time the test is ran, the initial index value of 0 is valid and the test is able to complete. The index value of 0 is not valid in subsequent test runs and the loop attempts to try index values of 1, 2, 3, and so on until a valid index value is found that corresponds to the message queue created earlier in the test. The msgctl() syscall returns -1 and sets errno to EINVAL when invalid index values are used. The test failure is caused by incorrectly comparing errno to -EINVAL when cycling through possible index values. Fix invalid test failures on subsequent runs of the msgque test by correctly comparing errno values to a non-negated EINVAL. Fixes: 3a665531a3b7 ("selftests: IPC message queue copy feature test") Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-04-14Revert "Kernel selftests: tpm2: check for tpm support"Jarkko Sakkinen
This reverts commit b32694cd0724d4ceca2c62cc7c3d3a8d1ffa11fc. The original comment was neither reviewed nor tested. Thus, this the *only* possible action to take. Cc: Nikita Sobolev <Nikita.Sobolev@synopsys.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-04-14selftests/ftrace: Add CONFIG_SAMPLE_FTRACE_DIRECT=m kconfigXiao Yang
ftrace-direct.tc and kprobe-direct.tc require CONFIG_SAMPLE_FTRACE_DIRECT=m so add it to config file which is used by merge_config.sh. Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-04-14selftests/seccomp: allow clock_nanosleep instead of nanosleepThadeu Lima de Souza Cascardo
glibc 2.31 calls clock_nanosleep when its nanosleep function is used. So the restart_syscall fails after that. In order to deal with it, we trace clock_nanosleep and nanosleep. Then we check for either. This works just fine on systems with both glibc 2.30 and glibc 2.31, whereas it failed before on a system with glibc 2.31. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-04-14kselftest/runner: allow to properly deliver signals to testsAndrea Righi
While running seccomp_bpf, kill_after_ptrace() gets stuck if we run it via /usr/bin/timeout (that is the default), until the timeout expires. This is because /usr/bin/timeout is preventing to properly deliver signals to ptrace'd children (SIGSYS in this case). This problem can be easily reproduced by running: $ sudo make TARGETS=seccomp kselftest ... # [ RUN ] TRACE_syscall.skip_a# not ok 1 selftests: seccomp: seccomp_bpf # TIMEOUT The test is hanging at this point until the timeout expires and then it reports the timeout error. Prevent this problem by passing --foreground to /usr/bin/timeout, allowing to properly deliver signals to children processes. Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-04-14selftests/harness: fix spelling mistake "SIGARLM" -> "SIGALRM"Colin Ian King
There a few identical spelling mistakes, fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-04-14tools headers: Synchronize linux/bits.h with the kernel sourcesArnaldo Carvalho de Melo
To pick up the changes in these csets: 295bcca84916 ("linux/bits.h: add compile time sanity check of GENMASK inputs") 3945ff37d2f4 ("linux/bits.h: Extract common header for vDSO") To address this tools/perf build warning: Warning: Kernel ABI header at 'tools/include/linux/bits.h' differs from latest version at 'include/linux/bits.h' diff -u tools/include/linux/bits.h include/linux/bits.h This clashes with usage of userspace's static_assert(), that, at least on glibc, is guarded by a ifnded/endif pair, do the same to our copy of build_bug.h and avoid that diff in check_headers.sh so that we continue checking for drifts with the kernel sources master copy. This will all be tested with the set of build containers that includes uCLibc, musl libc, lots of glibc versions in lots of distros and cross build environments. The tools/objtool, tools/bpf, etc were tested as well. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Rikard Falkeborn <rikard.falkeborn@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14tools headers: Adopt verbatim copy of compiletime_assert() from kernel sourcesArnaldo Carvalho de Melo
Will be needed when syncing the linux/bits.h header, in the next cset. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14tools headers: Update x86's syscall_64.tbl with the kernel sourcesArnaldo Carvalho de Melo
To pick the changes from: d3b1b776eefc ("x86/entry/64: Remove ptregs qualifier from syscall table") cab56d3484d4 ("x86/entry: Remove ABI prefixes from functions in syscall tables") 27dd84fafcd5 ("x86/entry/64: Use syscall wrappers for x32_rt_sigreturn") Addressing this tools/perf build warning: Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl' diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl That didn't result in any tooling changes, as what is extracted are just the first two columns, and these patches touched only the third. $ cp /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c /tmp $ cp arch/x86/entry/syscalls/syscall_64.tbl tools/perf/arch/x86/entry/syscalls/syscall_64.tbl $ make -C tools/perf O=/tmp/build/perf install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j12' parallel build DESCEND plugins CC /tmp/build/perf/util/syscalltbl.o INSTALL trace_plugins LD /tmp/build/perf/util/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf $ diff -u /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c /tmp/syscalls_64.c $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14tools headers UAPI: Sync drm/i915_drm.h with the kernel sourcesArnaldo Carvalho de Melo
To pick the change in: 88be76cdafc7 ("drm/i915: Allow userspace to specify ringsize on construction") That don't result in any changes in tooling, just silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h' diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14tools headers UAPI: Update tools's copy of drm.h headersArnaldo Carvalho de Melo
Picking the changes from: 455e00f1412f ("drm: Add getfb2 ioctl") Silencing these perf build warnings: Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h' diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h Now 'perf trace' and other code that might use the tools/perf/trace/beauty autogenerated tables will be able to translate this new ioctl code into a string: $ tools/perf/trace/beauty/drm_ioctl.sh > before $ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h $ tools/perf/trace/beauty/drm_ioctl.sh > after $ diff -u before after --- before 2020-04-14 09:28:45.461821077 -0300 +++ after 2020-04-14 09:28:53.594782685 -0300 @@ -107,6 +107,7 @@ [0xCB] = "SYNCOBJ_QUERY", [0xCC] = "SYNCOBJ_TRANSFER", [0xCD] = "SYNCOBJ_TIMELINE_SIGNAL", + [0xCE] = "MODE_GETFB2", [DRM_COMMAND_BASE + 0x00] = "I915_INIT", [DRM_COMMAND_BASE + 0x01] = "I915_FLUSH", [DRM_COMMAND_BASE + 0x02] = "I915_FLIP", $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Daniel Stone <daniels@collabora.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Lyude Paul <lyude@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14tools headers kvm: Sync linux/kvm.h with the kernel sourcesArnaldo Carvalho de Melo
To pick up the changes from: 9a5788c615f5 ("KVM: PPC: Book3S HV: Add a capability for enabling secure guests") 3c9bd4006bfc ("KVM: x86: enable dirty log gradually in small chunks") 13da9ae1cdbf ("KVM: s390: protvirt: introduce and enable KVM_CAP_S390_PROTECTED") e0d2773d487c ("KVM: s390: protvirt: UV calls in support of diag308 0, 1") 19e122776886 ("KVM: S390: protvirt: Introduce instruction data area bounce buffer") 29b40f105ec8 ("KVM: s390: protvirt: Add initial vm and cpu lifecycle handling") So far we're ignoring those arch specific ioctls, we need to revisit this at some time to have arch specific tables, etc: $ grep S390 tools/perf/trace/beauty/kvm_ioctl.sh egrep -v " ((ARM|PPC|S390)_|[GS]ET_(DEBUGREGS|PIT2|XSAVE|TSC_KHZ)|CREATE_SPAPR_TCE_64)" | \ $ This addresses these tools/perf build warnings: Warning: Kernel ABI header at 'tools/arch/arm/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm/include/uapi/asm/kvm.h' diff -u tools/arch/arm/include/uapi/asm/kvm.h arch/arm/include/uapi/asm/kvm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jay Zhou <jianjay.zhou@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14tools headers UAPI: Sync linux/fscrypt.h with the kernel sourcesArnaldo Carvalho de Melo
To pick the changes from: e98ad464750c ("fscrypt: add FS_IOC_GET_ENCRYPTION_NONCE ioctl") That don't trigger any changes in tooling. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/fscrypt.h' differs from latest version at 'include/uapi/linux/fscrypt.h' diff -u tools/include/uapi/linux/fscrypt.h include/uapi/linux/fscrypt.h In time we should come up with something like: $ tools/perf/trace/beauty/fsconfig.sh static const char *fsconfig_cmds[] = { [0] = "SET_FLAG", [1] = "SET_STRING", [2] = "SET_BINARY", [3] = "SET_PATH", [4] = "SET_PATH_EMPTY", [5] = "SET_FD", [6] = "CMD_CREATE", [7] = "CMD_RECONFIGURE", }; $ And: $ tools/perf/trace/beauty/drm_ioctl.sh | head #ifndef DRM_COMMAND_BASE #define DRM_COMMAND_BASE 0x40 #endif static const char *drm_ioctl_cmds[] = { [0x00] = "VERSION", [0x01] = "GET_UNIQUE", [0x02] = "GET_MAGIC", [0x03] = "IRQ_BUSID", [0x04] = "GET_MAP", [0x05] = "GET_CLIENT", $ For fscrypt's ioctls. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14tools include UAPI: Sync linux/vhost.h with the kernel sourcesArnaldo Carvalho de Melo
To get the changes in: 4c8cf31885f6 ("vhost: introduce vDPA-based backend") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks these new ioctls, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-04-14 09:12:28.559748968 -0300 +++ after 2020-04-14 09:12:38.781696242 -0300 @@ -24,9 +24,16 @@ [0x44] = "SCSI_GET_EVENTS_MISSED", [0x60] = "VSOCK_SET_GUEST_CID", [0x61] = "VSOCK_SET_RUNNING", + [0x72] = "VDPA_SET_STATUS", + [0x74] = "VDPA_SET_CONFIG", + [0x75] = "VDPA_SET_VRING_ENABLE", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", [0x12] = "GET_VRING_BASE", [0x26] = "GET_BACKEND_FEATURES", + [0x70] = "VDPA_GET_DEVICE_ID", + [0x71] = "VDPA_GET_STATUS", + [0x73] = "VDPA_GET_CONFIG", + [0x76] = "VDPA_GET_VRING_NUM", }; $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14tools arch x86: Sync asm/cpufeatures.h with the kernel sourcesArnaldo Carvalho de Melo
To pick up the changes from: 077168e241ec ("x86/mce/amd: Add PPIN support for AMD MCE") 753039ef8b2f ("x86/cpu/amd: Call init_amd_zn() om Family 19h processors too") 6650cdd9a8cc ("x86/split_lock: Enable split lock detection by kernel") These don't cause any changes in tooling, just silences this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Wei Huang <wei.huang2@amd.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14tools headers UAPI: Sync linux/mman.h with the kernelArnaldo Carvalho de Melo
To get the changes in: e346b3813067 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Add that to 'perf trace's mremap 'flags' decoder. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/mman.h' differs from latest version at 'include/uapi/linux/mman.h' diff -u tools/include/uapi/linux/mman.h include/uapi/linux/mman.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Brian Geffon <bgeffon@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14tools headers UAPI: Sync sched.h with the kernelArnaldo Carvalho de Melo
To get the changes in: ef2c41cf38a7 ("clone3: allow spawning processes into cgroups") Add that to 'perf trace's clone 'flags' decoder. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/sched.h' differs from latest version at 'include/uapi/linux/sched.h' diff -u tools/include/uapi/linux/sched.h include/uapi/linux/sched.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14tools headers: Update linux/vdso.h and grab a copy of vdso/const.hArnaldo Carvalho de Melo
To get in line with: 8165b57bca21 ("linux/const.h: Extract common header for vDSO") And silence this tools/perf/ build warning: Warning: Kernel ABI header at 'tools/include/linux/const.h' differs from latest version at 'include/linux/const.h' diff -u tools/include/linux/const.h include/linux/const.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 20:51:08 +0000