| Age | Commit message (Collapse) | Author |
|---|
|
Where state related to a 'perf record' session is grouped.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20200429131106.27974-2-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Trying to disentangle this a bit further, unfortunately it uses
parse_events(), its interesting to have it separated anyway, so do it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The hv_24×7 feature in IBM® POWER9™ processor-based servers provide the
facility to continuously collect large numbers of hardware performance
metrics efficiently and accurately.
This patch adds hv_24x7 metric file for different Socket/chip
resources.
Result:
power9 platform:
command:# ./perf stat --metric-only -M Memory_RD_BW_Chip -C 0 -I 1000
1.000096188 0.9 0.3
2.000285720 0.5 0.1
3.000424990 0.4 0.1
command:# ./perf stat --metric-only -M PowerBUS_Frequency -C 0 -I 1000
1.000097981 2.3 2.3
2.000291713 2.3 2.3
3.000421719 2.3 2.3
4.000550912 2.3 2.3
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20200401203340.31402-8-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit 54b5091606c18 ("perf stat: Implement --metric-only mode") added
function 'valid_only_metric()' which drops "Hz" or "hz", if it is part
of "ScaleUnit". This patch enable it since hv_24x7 supports couple of
frequency events.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20200401203340.31402-7-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Added test case for parsing "?" in metric expression.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20200401203340.31402-6-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Patch enhances current metric infrastructure to handle "?" in the metric
expression. The "?" can be use for parameters whose value not known
while creating metric events and which can be replace later at runtime
to the proper value. It also add flexibility to create multiple events
out of single metric event added in JSON file.
Patch adds function 'arch_get_runtimeparam' which is a arch specific
function, returns the count of metric events need to be created. By
default it return 1.
This infrastructure needed for hv_24x7 socket/chip level events.
"hv_24x7" chip level events needs specific chip-id to which the data is
requested. Function 'arch_get_runtimeparam' implemented in header.c
which extract number of sockets from sysfs file "sockets" under
"/sys/devices/hv_24x7/interface/".
With this patch basically we are trying to create as many metric events
as define by runtime_param.
For that one loop is added in function 'metricgroup__add_metric', which
create multiple events at run time depend on return value of
'arch_get_runtimeparam' and merge that event in 'group_list'.
To achieve that we are actually passing this parameter value as part of
`expr__find_other` function and changing "?" present in metric
expression with this value.
As in our JSON file, there gonna be single metric event, and out of
which we are creating multiple events.
To understand which data count belongs to which parameter value,
we also printing param value in generic_metric function.
For example,
command:# ./perf stat -M PowerBUS_Frequency -C 0 -I 1000
1.000101867 9,356,933 hv_24x7/pm_pb_cyc,chip=0/ # 2.3 GHz PowerBUS_Frequency_0
1.000101867 9,366,134 hv_24x7/pm_pb_cyc,chip=1/ # 2.3 GHz PowerBUS_Frequency_1
2.000314878 9,365,868 hv_24x7/pm_pb_cyc,chip=0/ # 2.3 GHz PowerBUS_Frequency_0
2.000314878 9,366,092 hv_24x7/pm_pb_cyc,chip=1/ # 2.3 GHz PowerBUS_Frequency_1
So, here _0 and _1 after PowerBUS_Frequency specify parameter value.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20200401203340.31402-5-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
get_cpuid_str() is used in tools/perf/arch/xxx/util/header.c,
fix the name in comment.
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lore.kernel.org/lkml/1588141992-48382-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fixes coccicheck warning:
tools/perf/builtin-report.c:1403:2-34: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/1587904683-3510-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fixes coccicheck warnings:
tools/perf/builtin-diff.c:1565:2-3: Unneeded semicolon
tools/perf/builtin-lock.c:778:2-3: Unneeded semicolon
tools/perf/builtin-mem.c:126:2-3: Unneeded semicolon
tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c:555:2-3: Unneeded semicolon
tools/perf/util/ordered-events.c:317:2-3: Unneeded semicolon
tools/perf/util/synthetic-events.c:1131:2-3: Unneeded semicolon
tools/perf/util/trace-event-read.c:78:2-3: Unneeded semicolon
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/1588065523-71423-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fixes coccicheck warnings:
tools/perf/builtin-c2c.c:1712:2-3: Unneeded semicolon
tools/perf/builtin-c2c.c:1928:2-3: Unneeded semicolon
tools/perf/builtin-c2c.c:2962:2-3: Unneeded semicolon
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/1588064336-70456-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fixes coccicheck warning:
tools/lib/traceevent/kbuffer-parse.c:441:2-3: Unneeded semicolon
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/1588065121-71236-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When printing iregs, there was a double newline printed because
perf_sample__fprintf_regs() was printing its own and then at the end of
all fields, perf script was adding one. This was causing blank line in
the output:
Before:
$ perf script -Fip,iregs
401b8d ABI:2 DX:0x100 SI:0x4a8340 DI:0x4a9340
401b8d ABI:2 DX:0x100 SI:0x4a9340 DI:0x4a8340
401b8d ABI:2 DX:0x100 SI:0x4a8340 DI:0x4a9340
401b8d ABI:2 DX:0x100 SI:0x4a9340 DI:0x4a8340
After:
$ perf script -Fip,iregs
401b8d ABI:2 DX:0x100 SI:0x4a8340 DI:0x4a9340
401b8d ABI:2 DX:0x100 SI:0x4a9340 DI:0x4a8340
401b8d ABI:2 DX:0x100 SI:0x4a8340 DI:0x4a9340
Committer testing:
First we need to figure out how to request that registers be recorded,
so we use:
# perf record -h reg
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-I, --intr-regs[=<any register>]
sample selected machine registers on interrupt, use '-I?' to list register names
--buildid-all Record build-id of all DSOs regardless of hits
--user-regs[=<any register>]
sample selected machine registers on interrupt, use '--user-regs=?' to list register names
#
Ok, now lets ask for them all:
# perf record -a --intr-regs --user-regs sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 4.105 MB perf.data (2760 samples) ]
#
Lets look at the first 6 output lines:
# perf script -Fip,iregs | head -6
ffffffff8a06f2f4 ABI:2 AX:0xffffd168fee0a980 BX:0xffff8a23b087f000 CX:0xfffeb69aaeb25d73 DX:0xffff8a253e8310f0 SI:0xfffffff9bafe7359 DI:0xffffb1690204fb10 BP:0xffffd168fee0a950 SP:0xffffb1690204fb88 IP:0xffffffff8a06f2f4 FLAGS:0x4e CS:0x10 SS:0x18 R8:0x1495f0a91129a R9:0xffff8a23b087f000 R10:0x1 R11:0xffffffff R12:0x0 R13:0xffff8a253e827e00 R14:0xffffd168fee0aa5c R15:0xffffd168fee0a980
ffffffff8a06f2f4 ABI:2 AX:0x0 BX:0xffffd168fee0a950 CX:0x5684cc1118491900 DX:0x0 SI:0xffffd168fee0a9d0 DI:0x202 BP:0xffffb1690204fd70 SP:0xffffb1690204fd20 IP:0xffffffff8a06f2f4 FLAGS:0x24e CS:0x10 SS:0x18 R8:0x0 R9:0xffffd168fee0a9d0 R10:0x1 R11:0xffffffff R12:0xffffffff8a23e480 R13:0xffff8a23b087f240 R14:0xffff8a23b087f000 R15:0xffffd168fee0a950
ffffffff8a06f2f4 ABI:2 AX:0x0 BX:0x0 CX:0x7f25f334335b DX:0x0 SI:0x2400 DI:0x4 BP:0x7fff5f264570 SP:0x7fff5f264538 IP:0xffffffff8a06f2f4 FLAGS:0x24e CS:0x10 SS:0x2b R8:0x0 R9:0x2312d20 R10:0x0 R11:0x246 R12:0x22cc0e0 R13:0x0 R14:0x0 R15:0x22d0780
#
Reproduced, apply the patch and:
[root@five ~]# perf script -Fip,iregs | head -6
ffffffff8a06f2f4 ABI:2 AX:0xffffd168fee0a980 BX:0xffff8a23b087f000 CX:0xfffeb69aaeb25d73 DX:0xffff8a253e8310f0 SI:0xfffffff9bafe7359 DI:0xffffb1690204fb10 BP:0xffffd168fee0a950 SP:0xffffb1690204fb88 IP:0xffffffff8a06f2f4 FLAGS:0x4e CS:0x10 SS:0x18 R8:0x1495f0a91129a R9:0xffff8a23b087f000 R10:0x1 R11:0xffffffff R12:0x0 R13:0xffff8a253e827e00 R14:0xffffd168fee0aa5c R15:0xffffd168fee0a980
ffffffff8a06f2f4 ABI:2 AX:0x0 BX:0xffffd168fee0a950 CX:0x5684cc1118491900 DX:0x0 SI:0xffffd168fee0a9d0 DI:0x202 BP:0xffffb1690204fd70 SP:0xffffb1690204fd20 IP:0xffffffff8a06f2f4 FLAGS:0x24e CS:0x10 SS:0x18 R8:0x0 R9:0xffffd168fee0a9d0 R10:0x1 R11:0xffffffff R12:0xffffffff8a23e480 R13:0xffff8a23b087f240 R14:0xffff8a23b087f000 R15:0xffffd168fee0a950
ffffffff8a06f2f4 ABI:2 AX:0x0 BX:0x0 CX:0x7f25f334335b DX:0x0 SI:0x2400 DI:0x4 BP:0x7fff5f264570 SP:0x7fff5f264538 IP:0xffffffff8a06f2f4 FLAGS:0x24e CS:0x10 SS:0x2b R8:0x0 R9:0x2312d20 R10:0x0 R11:0x246 R12:0x22cc0e0 R13:0x0 R14:0x0 R15:0x22d0780
ffffffff8a24074b ABI:2 AX:0xcb BX:0xcb CX:0x0 DX:0x0 SI:0xffffb1690204ff58 DI:0xcb BP:0xffffb1690204ff58 SP:0xffffb1690204ff40 IP:0xffffffff8a24074b FLAGS:0x24e CS:0x10 SS:0x18 R8:0x0 R9:0x0 R10:0x0 R11:0x0 R12:0x0 R13:0x0 R14:0x0 R15:0x0
ffffffff8a310600 ABI:2 AX:0x0 BX:0xffffffff8b8c39a0 CX:0x0 DX:0xffff8a2503890300 SI:0xffffb1690204ff20 DI:0xffff8a23e4080000 BP:0xffff8a23e4080000 SP:0xffffb1690204fec0 IP:0xffffffff8a310600 FLAGS:0x28e CS:0x10 SS:0x18 R8:0x0 R9:0x0 R10:0x0 R11:0x0 R12:0xffffffffffffffea R13:0xffff8a23e4080020 R14:0x0 R15:0x0
ffffffff8a11b688 ABI:2 AX:0x0 BX:0xffff8a237b7c8800 CX:0xffffb1690204fae0 DX:0x78 SI:0xffff8a237b7c8800 DI:0xffffb1690204fa10 BP:0xffffb1690204fb00 SP:0xffffb1690204fa00 IP:0xffffffff8a11b688 FLAGS:0x8a CS:0x10 SS:0x18 R8:0x1495f0a917eba R9:0xffffd168fde19a48 R10:0xffffb1690204fd98 R11:0xffff8a253e82afb0 R12:0xffff8a237b7c8800 R13:0xffffb1690204fb00 R14:0x0 R15:0xffff8a237b7c8800
[root@five ~]#
To see it more clearly, lets get just two of those registers by sample:
# perf record -a --intr-regs=ax,bx --user-regs=cx,dx sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 3.502 MB perf.data (1653 samples) ]
#
Extra info, lets see what gets setup in that 'struct perf_event_attr':
# perf evlist -v
cycles: size: 120, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD|REGS_USER|REGS_INTR, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 2, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, sample_regs_user: 0xc, sample_regs_intr: 0x3
#
Cook, some PERF_SAMPLE_REGS_USER|PERF_SAMPLE_REGS_INTR +
attr.sample_regs_user and attr.sample_regs_intr register masks, now lets
see if those newlines are gone in a more compact fashion:
# perf script -Fip,iregs,uregs
ffffffff8a56df78 ABI:2 AX:0xffff8a25137b6028 BX:0xffff8a2502f18000 ABI:2 CX:0x7f204460e49b DX:0xf42920
ffffffff8a56df78 ABI:2 AX:0xffff8a25137b6028 BX:0xffff8a2502f18000 ABI:2 CX:0x7f204460e49b DX:0xf42920
ffffffff8a56df78 ABI:2 AX:0xffff8a25137b6028 BX:0xffff8a2502f18000 ABI:2 CX:0x7f204460e49b DX:0xf42920
ffffffff8a56df78 ABI:2 AX:0xffff8a25137b6028 BX:0xffff8a2502f18000 ABI:2 CX:0x7f204460e49b DX:0xf42920
ffffffff8a56df78 ABI:2 AX:0xffff8a25137b6028 BX:0xffff8a2502f18000 ABI:2 CX:0x7f204460e49b DX:0xf42920
ffffffff8a56df78 ABI:2 AX:0xffff8a25137b6028 BX:0xffff8a2502f18000 ABI:2 CX:0x7f204460e49b DX:0xf42920
ffffffff8a29b78d ABI:2 AX:0x2a20ffcd6000 BX:0x2ec7d9000 ABI:2 CX:0x7f204460e49b DX:0xf42920
#
And where was that?
# perf script -Fip,iregs,uregs,sym,dso
ffffffff8a56df78 strrchr (/lib/modules/5.7.0-rc2/build/vmlinux) ABI:2 AX:0xffff8a25137b6028 BX:0xffff8a2502f18000 ABI:2 CX:0x7f204460e49b DX:0xf42920
ffffffff8a56df78 strrchr (/lib/modules/5.7.0-rc2/build/vmlinux) ABI:2 AX:0xffff8a25137b6028 BX:0xffff8a2502f18000 ABI:2 CX:0x7f204460e49b DX:0xf42920
ffffffff8a56df78 strrchr (/lib/modules/5.7.0-rc2/build/vmlinux) ABI:2 AX:0xffff8a25137b6028 BX:0xffff8a2502f18000 ABI:2 CX:0x7f204460e49b DX:0xf42920
ffffffff8a56df78 strrchr (/lib/modules/5.7.0-rc2/build/vmlinux) ABI:2 AX:0xffff8a25137b6028 BX:0xffff8a2502f18000 ABI:2 CX:0x7f204460e49b DX:0xf42920
ffffffff8a56df78 strrchr (/lib/modules/5.7.0-rc2/build/vmlinux) ABI:2 AX:0xffff8a25137b6028 BX:0xffff8a2502f18000 ABI:2 CX:0x7f204460e49b DX:0xf42920
ffffffff8a56df78 strrchr (/lib/modules/5.7.0-rc2/build/vmlinux) ABI:2 AX:0xffff8a25137b6028 BX:0xffff8a2502f18000 ABI:2 CX:0x7f204460e49b DX:0xf42920
ffffffff8a29b78d __vma_link_rb (/lib/modules/5.7.0-rc2/build/vmlinux) ABI:2 AX:0x2a20ffcd6000 BX:0x2ec7d9000 ABI:2 CX:0x7f204460e49b DX:0xf42920
#
Signed-off-by: Stephane Eranian <eranian@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200418231908.152212-1-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The synthesize benchmark, run on a single process and thread, shows
perf_event__synthesize_mmap_events as the hottest function with fgets
and sscanf taking the majority of execution time.
fscanf performs similarly well. Replace the scanf call with manual
reading of each field of the /proc/pid/maps line, and remove some
unnecessary buffering.
This change also addresses potential, but unlikely, buffer overruns for
the string values read by scanf.
Performance before is:
$ sudo perf bench internals synthesize -m 16 -M 16 -s -t
\# Running 'internals/synthesize' benchmark:
Computing performance of single threaded perf event synthesis by
synthesizing events on the perf process itself:
Average synthesis took: 102.810 usec (+- 0.027 usec)
Average num. events: 17.000 (+- 0.000)
Average time per event 6.048 usec
Average data synthesis took: 106.325 usec (+- 0.018 usec)
Average num. events: 89.000 (+- 0.000)
Average time per event 1.195 usec
Computing performance of multi threaded perf event synthesis by
synthesizing events on CPU 0:
Number of synthesis threads: 16
Average synthesis took: 68103.100 usec (+- 441.234 usec)
Average num. events: 30703.000 (+- 0.730)
Average time per event 2.218 usec
And after is:
$ sudo perf bench internals synthesize -m 16 -M 16 -s -t
\# Running 'internals/synthesize' benchmark:
Computing performance of single threaded perf event synthesis by
synthesizing events on the perf process itself:
Average synthesis took: 50.388 usec (+- 0.031 usec)
Average num. events: 17.000 (+- 0.000)
Average time per event 2.964 usec
Average data synthesis took: 52.693 usec (+- 0.020 usec)
Average num. events: 89.000 (+- 0.000)
Average time per event 0.592 usec
Computing performance of multi threaded perf event synthesis by
synthesizing events on CPU 0:
Number of synthesis threads: 16
Average synthesis took: 45022.400 usec (+- 552.740 usec)
Average num. events: 30624.200 (+- 10.037)
Average time per event 1.470 usec
On a Intel Xeon 6154 compiling with Debian gcc 9.2.1.
Committer testing:
On a AMD Ryzen 5 3600X 6-Core Processor:
Before:
# perf bench internals synthesize --min-threads 12 --max-threads 12 --st --mt
# Running 'internals/synthesize' benchmark:
Computing performance of single threaded perf event synthesis by
synthesizing events on the perf process itself:
Average synthesis took: 267.491 usec (+- 0.176 usec)
Average num. events: 56.000 (+- 0.000)
Average time per event 4.777 usec
Average data synthesis took: 277.257 usec (+- 0.169 usec)
Average num. events: 287.000 (+- 0.000)
Average time per event 0.966 usec
Computing performance of multi threaded perf event synthesis by
synthesizing events on CPU 0:
Number of synthesis threads: 12
Average synthesis took: 81599.500 usec (+- 346.315 usec)
Average num. events: 36096.100 (+- 2.523)
Average time per event 2.261 usec
#
After:
# perf bench internals synthesize --min-threads 12 --max-threads 12 --st --mt
# Running 'internals/synthesize' benchmark:
Computing performance of single threaded perf event synthesis by
synthesizing events on the perf process itself:
Average synthesis took: 110.125 usec (+- 0.080 usec)
Average num. events: 56.000 (+- 0.000)
Average time per event 1.967 usec
Average data synthesis took: 118.518 usec (+- 0.057 usec)
Average num. events: 287.000 (+- 0.000)
Average time per event 0.413 usec
Computing performance of multi threaded perf event synthesis by
synthesizing events on CPU 0:
Number of synthesis threads: 12
Average synthesis took: 43490.700 usec (+- 284.527 usec)
Average num. events: 37028.500 (+- 0.563)
Average time per event 1.175 usec
#
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrey Zhizhikin <andrey.z@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200415054050.31645-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The synthesize benchmark shows the majority of execution time going to
fgets and sscanf, necessary to parse /proc/pid/maps. Add a new buffered
reading library that will be used to replace these calls in a follow-up
CL. Add tests for the library to perf test.
Committer tests:
$ perf test api
63: Test api io : Ok
$
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrey Zhizhikin <andrey.z@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200415054050.31645-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
By default this isn't run as it reads /proc and may not have access.
For consistency, modify the single threaded benchmark to compute an
average time per event.
Committer testing:
$ grep -m1 "model name" /proc/cpuinfo
model name : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
$ grep "model name" /proc/cpuinfo | wc -l
8
$
$ perf bench internals synthesize -h
# Running 'internals/synthesize' benchmark:
Usage: perf bench internals synthesize <options>
-I, --multi-iterations <n>
Number of iterations used to compute multi-threaded average
-i, --single-iterations <n>
Number of iterations used to compute single-threaded average
-M, --max-threads <n>
Maximum number of threads in multithreaded bench
-m, --min-threads <n>
Minimum number of threads in multithreaded bench
-s, --st Run single threaded benchmark
-t, --mt Run multi-threaded benchmark
$
$ perf bench internals synthesize -t
# Running 'internals/synthesize' benchmark:
Computing performance of multi threaded perf event synthesis by
synthesizing events on CPU 0:
Number of synthesis threads: 1
Average synthesis took: 65449.000 usec (+- 586.442 usec)
Average num. events: 9405.400 (+- 0.306)
Average time per event 6.959 usec
Number of synthesis threads: 2
Average synthesis took: 37838.300 usec (+- 130.259 usec)
Average num. events: 9501.800 (+- 20.469)
Average time per event 3.982 usec
Number of synthesis threads: 3
Average synthesis took: 48551.400 usec (+- 225.686 usec)
Average num. events: 9544.000 (+- 0.000)
Average time per event 5.087 usec
Number of synthesis threads: 4
Average synthesis took: 29632.500 usec (+- 50.808 usec)
Average num. events: 9544.000 (+- 0.000)
Average time per event 3.105 usec
Number of synthesis threads: 5
Average synthesis took: 33920.400 usec (+- 284.509 usec)
Average num. events: 9544.000 (+- 0.000)
Average time per event 3.554 usec
Number of synthesis threads: 6
Average synthesis took: 27604.100 usec (+- 72.344 usec)
Average num. events: 9548.000 (+- 0.000)
Average time per event 2.891 usec
Number of synthesis threads: 7
Average synthesis took: 25406.300 usec (+- 933.371 usec)
Average num. events: 9545.500 (+- 0.167)
Average time per event 2.662 usec
Number of synthesis threads: 8
Average synthesis took: 24110.400 usec (+- 73.229 usec)
Average num. events: 9551.000 (+- 0.000)
Average time per event 2.524 usec
$
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrey Zhizhikin <andrey.z@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200415054050.31645-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To control degree of parallelism of the synthesize_mmap() code which
is scanning /proc/PID/task/PID/maps and can be time consuming.
Mimic perf top way of handling the option.
If not specified will default to 1 thread, i.e. default behavior before
this option.
On a desktop computer the processing of /proc/PID/task/PID/maps isn't
slow enough to warrant parallel processing and the thread creation has
some cost - hence the default of 1. On a loaded server with
>100 cores it is possible to see synthesis times in the order of
seconds and in this case having the option is desirable.
As the processing is a synchronization point, it is legitimate to worry if
Amdahl's law will apply to this patch. Profiling with this patch in
place:
https://lore.kernel.org/lkml/20200415054050.31645-4-irogers@google.com/
shows:
...
- 32.59% __perf_event__synthesize_threads
- 32.54% __event__synthesize_thread
+ 22.13% perf_event__synthesize_mmap_events
+ 6.68% perf_event__get_comm_ids.constprop.0
+ 1.49% process_synthesized_event
+ 1.29% __GI___readdir64
+ 0.60% __opendir
...
That is the processing is 1.49% of execution time and there is plenty to
make parallel. This is shown in the benchmark in this patch:
https://lore.kernel.org/lkml/20200415054050.31645-2-irogers@google.com/
Computing performance of multi threaded perf event synthesis by
synthesizing events on CPU 0:
Number of synthesis threads: 1
Average synthesis took: 127729.000 usec (+- 3372.880 usec)
Average num. events: 21548.600 (+- 0.306)
Average time per event 5.927 usec
Number of synthesis threads: 2
Average synthesis took: 88863.500 usec (+- 385.168 usec)
Average num. events: 21552.800 (+- 0.327)
Average time per event 4.123 usec
Number of synthesis threads: 3
Average synthesis took: 83257.400 usec (+- 348.617 usec)
Average num. events: 21553.200 (+- 0.327)
Average time per event 3.863 usec
Number of synthesis threads: 4
Average synthesis took: 75093.000 usec (+- 422.978 usec)
Average num. events: 21554.200 (+- 0.200)
Average time per event 3.484 usec
Number of synthesis threads: 5
Average synthesis took: 64896.600 usec (+- 353.348 usec)
Average num. events: 21558.000 (+- 0.000)
Average time per event 3.010 usec
Number of synthesis threads: 6
Average synthesis took: 59210.200 usec (+- 342.890 usec)
Average num. events: 21560.000 (+- 0.000)
Average time per event 2.746 usec
Number of synthesis threads: 7
Average synthesis took: 54093.900 usec (+- 306.247 usec)
Average num. events: 21562.000 (+- 0.000)
Average time per event 2.509 usec
Number of synthesis threads: 8
Average synthesis took: 48938.700 usec (+- 341.732 usec)
Average num. events: 21564.000 (+- 0.000)
Average time per event 2.269 usec
Where average time per synthesized event goes from 5.927 usec with 1
thread to 2.269 usec with 8. This isn't a linear speed up as not all of
synthesize code has been made parallel. If the synthesis time was about
10 seconds then using 8 threads may bring this down to less than 4.
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tony Jones <tonyj@suse.de>
Cc: yuzhoujian <yuzhoujian@didichuxing.com>
Link: http://lore.kernel.org/lkml/20200422155038.9380-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit 2d4f27999b88 ("perf data: Add global path holder") missed path
conversion in tests/topology.c, causing the "Session topology" testcase
to "hang" (waits forever for input from stdin) when doing "ssh $VM perf
test".
Can be reproduced by running "cat | perf test topo", and crashed by
replacing cat with true:
$ true | perf test -v topo
40: Session topology :
--- start ---
test child forked, pid 3638
templ file: /tmp/perf-test-QPvAch
incompatible file format
incompatible file format (rerun with -v to learn more)
free(): invalid pointer
test child interrupted
---- end ----
Session topology: FAILED!
Committer testing:
Reproduced the above result before the patch and after it is back
working:
# true | perf test -v topo
41: Session topology :
--- start ---
test child forked, pid 19374
templ file: /tmp/perf-test-YOTEQg
CPU 0, core 0, socket 0
CPU 1, core 1, socket 0
CPU 2, core 2, socket 0
CPU 3, core 3, socket 0
CPU 4, core 0, socket 0
CPU 5, core 1, socket 0
CPU 6, core 2, socket 0
CPU 7, core 3, socket 0
test child finished with 0
---- end ----
Session topology: Ok
#
Fixes: 2d4f27999b88 ("perf data: Add global path holder")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200423115341.562782-1-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For interval mode, the metric is printed after the '#' character if it
exists. But it's not calculated by the counts generated in this
interval.
See the following examples:
root@kbl-ppc:~# perf stat -M CPI -I1000 --interval-count 2
# time counts unit events
1.000422803 764,809 inst_retired.any # 2.9 CPI
1.000422803 2,234,932 cycles
2.001464585 1,960,061 inst_retired.any # 1.6 CPI
2.001464585 4,022,591 cycles
The second CPI should not be 1.6 (4,022,591/1,960,061 is 2.1)
root@kbl-ppc:~# perf stat -e cycles,instructions -I1000 --interval-count 2
# time counts unit events
1.000429493 2,869,311 cycles
1.000429493 816,875 instructions # 0.28 insn per cycle
2.001516426 9,260,973 cycles
2.001516426 5,250,634 instructions # 0.87 insn per cycle
The second 'insn per cycle' should not be 0.87 (5,250,634/9,260,973 is
0.57).
The current code uses a global variable 'rt_stat' for tracking and
updating the std dev of runtime stat. Unlike the counts, 'rt_stat' is not
reset for interval. While the counts are reset for interval.
perf_stat_process_counter()
{
if (config->interval)
init_stats(ps->res_stats);
}
So for interval mode, the 'rt_stat' variable should be reset too.
This patch resets 'rt_stat' before read_counters(), so the runtime stat
is only calculated by the counts generated in this interval.
With this patch:
root@kbl-ppc:~# perf stat -M CPI -I1000 --interval-count 2
# time counts unit events
1.000420924 2,408,818 inst_retired.any # 2.1 CPI
1.000420924 5,010,111 cycles
2.001448579 2,798,407 inst_retired.any # 1.6 CPI
2.001448579 4,599,861 cycles
root@kbl-ppc:~# perf stat -e cycles,instructions -I1000 --interval-count 2
# time counts unit events
1.000428555 2,769,714 cycles
1.000428555 774,462 instructions # 0.28 insn per cycle
2.001471562 3,595,904 cycles
2.001471562 1,243,703 instructions # 0.35 insn per cycle
Now the second 'insn per cycle' and CPI are calculated by the counts
generated in this interval.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-By: Kajol Jain <kjain@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200420145417.6864-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
As the code comments in perf_stat_process_counter() say, we calculate
counter's data every interval, and the display code shows ps->res_stats
avg value. We need to zero the stats for interval mode.
But the current code only zeros the res_stats[0], it doesn't zero the
res_stats[1] and res_stats[2], which are for ena and run of counter.
This patch zeros the whole res_stats[] for interval mode.
Fixes: 51fd2df1e882 ("perf stat: Fix interval output values")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200409070755.17261-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
al->sym may be NULL given current if conditions and may cause a segv.
Fixes: d2bedb7863e9 ("perf script: Allow --symbol to accept hexadecimal addresses")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200421004329.43109-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Code cleanup: Remove duplicate headers which are included twice.
Signed-off-by: Jagadeesh Pagadala <jagdsh.linux@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/1587276836-17088-1-git-send-email-jagdsh.linux@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fix div-by-zero if runtime is zero:
$ perf bench futex hash --runtime=0
# Running 'futex/hash' benchmark:
Run summary [PID 12090]: 4 threads, each operating on 1024 [private] futexes for 0 secs.
Floating point exception (core dumped)
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200417132330.119407-4-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Do not bother with close() if fd is not valid, just to silence valgrind:
$ valgrind ./perf script
==59169== Memcheck, a memory error detector
==59169== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al.
==59169== Using Valgrind-3.14.0 and LibVEX; rerun with -h for copyright info
==59169== Command: ./perf script
==59169==
==59169== Warning: invalid file descriptor -1 in syscall close()
==59169== Warning: invalid file descriptor -1 in syscall close()
==59169== Warning: invalid file descriptor -1 in syscall close()
==59169== Warning: invalid file descriptor -1 in syscall close()
==59169== Warning: invalid file descriptor -1 in syscall close()
==59169== Warning: invalid file descriptor -1 in syscall close()
==59169== Warning: invalid file descriptor -1 in syscall close()
==59169== Warning: invalid file descriptor -1 in syscall close()
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200417132330.119407-1-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core fixes and improvements from Arnaldo Carvalho de Melo:
kernel + tools/perf:
Alexey Budankov:
- Introduce CAP_PERFMON to kernel and user space.
callchains:
Adrian Hunter:
- Allow using Intel PT to synthesize callchains for regular events.
Kan Liang:
- Stitch LBR records from multiple samples to get deeper backtraces,
there are caveats, see the csets for details.
perf script:
Andreas Gerstmayr:
- Add flamegraph.py script
BPF:
Jiri Olsa:
- Synthesize bpf_trampoline/dispatcher ksymbol events.
perf stat:
Arnaldo Carvalho de Melo:
- Honour --timeout for forked workloads.
Stephane Eranian:
- Force error in fallback on :k events, to avoid counting nothing when
the user asks for kernel events but is not allowed to.
perf bench:
Ian Rogers:
- Add event synthesis benchmark.
tools api fs:
Stephane Eranian:
- Make xxx__mountpoint() more scalable
libtraceevent:
He Zhe:
- Handle return value of asprintf.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Merge misc fixes from Andrew Morton:
"15 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
tools/vm: fix cross-compile build
coredump: fix null pointer dereference on coredump
mm: shmem: disable interrupt when acquiring info->lock in userfaultfd_copy path
shmem: fix possible deadlocks on shmlock_user_lock
vmalloc: fix remap_vmalloc_range() bounds checks
mm/shmem: fix build without THP
mm/ksm: fix NULL pointer dereference when KSM zero page is enabled
tools/build: tweak unused value workaround
checkpatch: fix a typo in the regex for $allocFunctions
mm, gup: return EINTR when gup is interrupted by fatal signals
mm/hugetlb: fix a addressing exception caused by huge_pte_offset
MAINTAINERS: add an entry for kfifo
mm/userfaultfd: disable userfaultfd-wp on x86_32
slub: avoid redzone when choosing freepointer location
sh: fix build error in mm/init.c
|
|
Pull virtio fixes and cleanups from Michael Tsirkin:
- Some bug fixes
- Cleanup a couple of issues that surfaced meanwhile
- Disable vhost on ARM with OABI for now - to be fixed fully later in
the cycle or in the next release.
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (24 commits)
vhost: disable for OABI
virtio: drop vringh.h dependency
virtio_blk: add a missing include
virtio-balloon: Avoid using the word 'report' when referring to free page hinting
virtio-balloon: make virtballoon_free_page_report() static
vdpa: fix comment of vdpa_register_device()
vdpa: make vhost, virtio depend on menu
vdpa: allow a 32 bit vq alignment
drm/virtio: fix up for include file changes
remoteproc: pull in slab.h
rpmsg: pull in slab.h
virtio_input: pull in slab.h
remoteproc: pull in slab.h
virtio-rng: pull in slab.h
virtgpu: pull in uaccess.h
tools/virtio: make asm/barrier.h self contained
tools/virtio: define aligned attribute
virtio/test: fix up after IOTLB changes
vhost: Create accessors for virtqueues private_data
vdpasim: Return status in vdpasim_get_status
...
|
|
Commit 7ed1c1901fe5 ("tools: fix cross-compile var clobbering") moved
the setup of the CC variable to tools/scripts/Makefile.include to make
the behavior consistent across all the tools Makefiles.
As the vm tools missed the include we end up with the wrong CC in a
cross-compiling evironment.
Fixes: 7ed1c1901fe5 (tools: fix cross-compile var clobbering)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Martin Kelly <martin@martingkelly.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200416104748.25243-1-l.stach@pengutronix.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Clang has -Wself-assign enabled by default under -Wall, which always
gets -Werror'ed on this file, causing sync-compare-and-swap to be
disabled by default.
The generally-accepted way to spell "this value is intentionally
unused," is casting it to `void`. This is accepted by both GCC and
Clang with -Wall enabled: https://godbolt.org/z/qqZ9r3
Signed-off-by: George Burgess IV <gbiv@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: http://lkml.kernel.org/r/20200414195638.156123-1-gbiv@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 and objtool fixes from Thomas Gleixner:
"A set of fixes for x86 and objtool:
objtool:
- Ignore the double UD2 which is emitted in BUG() when
CONFIG_UBSAN_TRAP is enabled.
- Support clang non-section symbols in objtool ORC dump
- Fix switch table detection in .text.unlikely
- Make the BP scratch register warning more robust.
x86:
- Increase microcode maximum patch size for AMD to cope with new CPUs
which have a larger patch size.
- Fix a crash in the resource control filesystem when the removal of
the default resource group is attempted.
- Preserve Code and Data Prioritization enabled state accross CPU
hotplug.
- Update split lock cpu matching to use the new X86_MATCH macros.
- Change the split lock enumeration as Intel finaly decided that the
IA32_CORE_CAPABILITIES bits are not architectural contrary to what
the SDM claims. !@#%$^!
- Add Tremont CPU models to the split lock detection cpu match.
- Add a missing static attribute to make sparse happy"
* tag 'x86-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/split_lock: Add Tremont family CPU models
x86/split_lock: Bits in IA32_CORE_CAPABILITIES are not architectural
x86/resctrl: Preserve CDP enable over CPU hotplug
x86/resctrl: Fix invalid attempt at removing the default resource group
x86/split_lock: Update to use X86_MATCH_INTEL_FAM6_MODEL()
x86/umip: Make umip_insns static
x86/microcode/AMD: Increase microcode PATCH_MAX_SIZE
objtool: Make BP scratch register warning more robust
objtool: Fix switch table detection in .text.unlikely
objtool: Support Clang non-section symbols in ORC generation
objtool: Support Clang non-section symbols in ORC dump
objtool: Fix CONFIG_UBSAN_TRAP unreachable warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf tooling fixes and updates from Thomas Gleixner:
- Fix the header line of perf stat output for '--metric-only --per-socket'
- Fix the python build with clang
- The usual tools UAPI header synchronization
* tag 'perf-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools headers: Synchronize linux/bits.h with the kernel sources
tools headers: Adopt verbatim copy of compiletime_assert() from kernel sources
tools headers: Update x86's syscall_64.tbl with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Update tools's copy of drm.h headers
tools headers kvm: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync linux/fscrypt.h with the kernel sources
tools include UAPI: Sync linux/vhost.h with the kernel sources
tools arch x86: Sync asm/cpufeatures.h with the kernel sources
tools headers UAPI: Sync linux/mman.h with the kernel
tools headers UAPI: Sync sched.h with the kernel
tools headers: Update linux/vdso.h and grab a copy of vdso/const.h
perf stat: Fix no metric header if --per-socket and --metric-only set
perf python: Check if clang supports -fno-semantic-interposition
tools arch x86: Sync the msr-index.h copy with the kernel sources
|
|
Perf checks the duplicate entries in a callchain before adding an entry.
However the check is very slow especially with deeper call stack.
Almost ~50% elapsed time of perf report is spent on the check when the
call stack is always depth of 32.
The hist_entry__cmp() is used to compare the new entry with the old
entries. It will go through all the available sorts in the sort_list,
and call the specific cmp of each sort, which is very slow.
Actually, for most cases, there are no duplicate entries in callchain.
The symbols are usually different. It's much faster to do a quick check
for symbols first. Only do the full cmp when the symbols are exactly the
same.
The quick check is only to check symbols, not dso. Export
_sort__sym_cmp.
$ perf record --call-graph lbr ./tchain_edit_64
Without the patch
$time perf report --stdio
real 0m21.142s
user 0m21.110s
sys 0m0.033s
With the patch
$time perf report --stdio
real 0m10.977s
user 0m10.948s
sys 0m0.027s
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-18-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
With the LBR stitching approach, the reconstructed LBR call stack can
break the HW limitation. However, it may reconstruct invalid call stacks
in some cases, e.g. exception handing such as setjmp/longjmp. Also, it
may impact the processing time especially when the number of samples
with stitched LBRs are huge.
Add an option to enable the approach.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-17-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
With the LBR stitching approach, the reconstructed LBR call stack
can break the HW limitation. However, it may reconstruct invalid call
stacks in some cases, e.g. exception handing such as setjmp/longjmp.
Also, it may impact the processing time especially when the number of
samples with stitched LBRs are huge.
Add an option to enable the approach.
The option must be used with --call-graph lbr.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-16-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
With the LBR stitching approach, the reconstructed LBR call stack can
break the HW limitation. However, it may reconstruct invalid call stacks
in some cases, e.g. exception handing such as setjmp/longjmp. Also, it
may impact the processing time especially when the number of samples
with stitched LBRs are huge.
Add an option to enable the approach.
Committer testing:
Using the same perf.data as with the latest cset committer testing
section:
$ perf script --stitch-lbr
<SNIP>
tchain_edit 11131 15164.984292: 437491 cycles:u:
401106 f43+0x0 (/wb/tchain_edit)
40114c f42+0x18 (/wb/tchain_edit)
401172 f41+0xe (/wb/tchain_edit)
401194 f40+0x0 (/wb/tchain_edit)
40119b f39+0x0 (/wb/tchain_edit)
4011a2 f38+0x0 (/wb/tchain_edit)
4011a9 f37+0x0 (/wb/tchain_edit)
4011b0 f36+0x0 (/wb/tchain_edit)
4011b7 f35+0x0 (/wb/tchain_edit)
4011be f34+0x0 (/wb/tchain_edit)
4011c5 f33+0x0 (/wb/tchain_edit)
4011cc f32+0x0 (/wb/tchain_edit)
401207 f31+0x34 (/wb/tchain_edit)
401212 f30+0x0 (/wb/tchain_edit)
401219 f29+0x0 (/wb/tchain_edit)
401220 f28+0x0 (/wb/tchain_edit)
401227 f27+0x0 (/wb/tchain_edit)
40122e f26+0x0 (/wb/tchain_edit)
401235 f25+0x0 (/wb/tchain_edit)
40123c f24+0x0 (/wb/tchain_edit)
401243 f23+0x0 (/wb/tchain_edit)
40124a f22+0x0 (/wb/tchain_edit)
401251 f21+0x0 (/wb/tchain_edit)
401258 f20+0x0 (/wb/tchain_edit)
40125f f19+0x0 (/wb/tchain_edit)
401266 f18+0x0 (/wb/tchain_edit)
40126d f17+0x0 (/wb/tchain_edit)
401274 f16+0x0 (/wb/tchain_edit)
40127b f15+0x0 (/wb/tchain_edit)
401282 f14+0x0 (/wb/tchain_edit)
401289 f13+0x0 (/wb/tchain_edit)
401290 f12+0x0 (/wb/tchain_edit)
401297 f11+0x0 (/wb/tchain_edit)
40129e f10+0x0 (/wb/tchain_edit)
4012a5 f9+0x0 (/wb/tchain_edit)
4012ac f8+0x0 (/wb/tchain_edit)
4012b3 f7+0x0 (/wb/tchain_edit)
4012ba f6+0x0 (/wb/tchain_edit)
4012c1 f5+0x0 (/wb/tchain_edit)
4012c8 f4+0x0 (/wb/tchain_edit)
4012cf f3+0x0 (/wb/tchain_edit)
4012d6 f2+0x0 (/wb/tchain_edit)
4012dd f1+0x0 (/wb/tchain_edit)
4012e4 main+0x0 (/wb/tchain_edit)
7f41a5016f41 __libc_start_main+0xf1 (/usr/lib64/libc-2.29.so)
<SNIP>
$
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-15-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
With the LBR stitching approach, the reconstructed LBR call stack can
break the HW limitation. However, it may reconstruct invalid call stacks
in some cases, e.g. exception handing such as setjmp/longjmp. Also, it
may impact the processing time especially when the number of samples
with stitched LBRs are huge.
Add an option to enable the approach.
# To display the perf.data header info, please use
# --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 6K of event 'cycles'
# Event count (approx.): 6492797701
#
# Children Self Command Shared Object Symbol
# ........ ........ ............... ..................
# .................................
#
99.99% 99.99% tchain_edit tchain_edit [.] f43
|
---main
f1
f2
f3
f4
f5
f6
f7
f8
f9
f10
f11
f12
f13
f14
f15
f16
f17
f18
f19
f20
f21
f22
f23
f24
f25
f26
f27
f28
f29
f30
f31
|
--99.65%--f32
f33
f34
f35
f36
f37
f38
f39
f40
f41
f42
f43
Committer testing:
$ perf record --call-graph lbr /wb/tchain_edit
[ perf record: Woken up 23 times to write data ]
[ perf record: Captured and wrote 5.578 MB perf.data (6839 samples) ]
$ perf report --header-only | egrep 'cpu(desc|.*capabilities)'
# cpudesc : Intel(R) Core(TM) i5-7500 CPU @ 3.40GHz
# cpu pmu capabilities: branches=32, max_precise=3, pmu_name=skylake
$
Before:
$ perf report --no-children --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 6K of event 'cycles:u'
# Event count (approx.): 6459523879
#
# Overhead Command Shared Object Symbol
# ........ ........... ................ .......................
#
99.95% tchain_edit tchain_edit [.] f43
|
--99.92%--f43
f42
f41
f40
f39
f38
f37
f36
f35
f34
f33
f32
f31
f30
f29
f28
f27
f26
f25
f24
f23
f22
f21
f20
f19
f18
f17
f16
f15
f14
f13
f12
f11
0.03% tchain_edit tchain_edit [.] f42
0.01% tchain_edit tchain_edit [.] f41
0.00% tchain_edit tchain_edit [.] f31
0.00% tchain_edit ld-2.29.so [.] _dl_relocate_object
0.00% tchain_edit ld-2.29.so [.] memmove
0.00% tchain_edit [unknown] [k] 0xffffffff93a00b17
After:
$ perf report --stitch-lbr --no-children --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 6K of event 'cycles:u'
# Event count (approx.): 6459496645
#
# Overhead Command Shared Object Symbol
# ........ ........... ................ ........................
#
99.97% tchain_edit tchain_edit [.] f43
|
--99.93%--f43
f42
f41
f40
f39
f38
f37
f36
f35
f34
f33
f32
f31
f30
f29
f28
f27
f26
f25
f24
f23
f22
f21
f20
f19
f18
f17
f16
f15
f14
f13
f12
f11
f10
f9
f8
f7
f6
f5
f4
f3
f2
f1
main
__libc_start_main
0.02% tchain_edit [unknown] [k] 0xffffffff93a00b17
0.01% tchain_edit tchain_edit [.] f31
0.00% tchain_edit ld-2.29.so [.] _dl_important_hwcaps
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-14-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In LBR call stack mode, the depth of reconstructed LBR call stack limits
to the number of LBR registers.
For example, on skylake, the depth of reconstructed LBR call stack is
always <= 32.
# To display the perf.data header info, please use
# --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 6K of event 'cycles'
# Event count (approx.): 6487119731
#
# Children Self Command Shared Object Symbol
# ........ ........ ............... ..................
# ................................
99.97% 99.97% tchain_edit tchain_edit [.] f43
|
--99.64%--f11
f12
f13
f14
f15
f16
f17
f18
f19
f20
f21
f22
f23
f24
f25
f26
f27
f28
f29
f30
f31
f32
f33
f34
f35
f36
f37
f38
f39
f40
f41
f42
f43
For a call stack which is deeper than LBR limit, HW will overwrite the
LBR register with oldest branch. Only partial call stacks can be
reconstructed.
However, the overwritten LBRs may still be retrieved from previous
sample. At that moment, HW hasn't overwritten the LBR registers yet.
Perf tools can stitch those overwritten LBRs on current call stacks to
get a more complete call stack.
To determine if LBRs can be stitched, perf tools need to compare current
sample with previous sample.
- They should have identical LBR records (Same from, to and flags
values, and the same physical index of LBR registers).
- The searching starts from the base-of-stack of current sample.
Once perf determines to stitch the previous LBRs, the corresponding LBR
cursor nodes will be copied to 'lists'. The 'lists' is to track the LBR
cursor nodes which are going to be stitched.
When the stitching is over, the nodes will not be freed immediately.
They will be moved to 'free_lists'. Next stitching may reuse the space.
Both 'lists' and 'free_lists' will be freed when all samples are
processed.
Committer notes:
Fix the intel-pt.c initialization of the union with 'struct
branch_flags', that breaks the build with its unnamed union on older gcc
versions.
Uninline thread__free_stitch_list(), as it grew big and started dragging
includes to thread.h, so move it to thread.c where what it needs in
terms of headers are already there.
This fixes the build in several systems such as debian:experimental when
cross building to the MIPS32 architecture, i.e. in the other cases what
was needed was being included by sheer luck.
In file included from builtin-sched.c:11:
util/thread.h: In function 'thread__free_stitch_list':
util/thread.h:169:3: error: implicit declaration of function 'free' [-Werror=implicit-function-declaration]
169 | free(pos);
| ^~~~
util/thread.h:169:3: error: incompatible implicit declaration of built-in function 'free' [-Werror]
util/thread.h:19:1: note: include '<stdlib.h>' or provide a declaration of 'free'
18 | #include "callchain.h"
+++ |+#include <stdlib.h>
19 |
util/thread.h:174:3: error: incompatible implicit declaration of built-in function 'free' [-Werror]
174 | free(pos);
| ^~~~
util/thread.h:174:3: note: include '<stdlib.h>' or provide a declaration of 'free'
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-13-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The cursor nodes which generates from sample are eventually added into
callchain. To avoid generating cursor nodes from previous samples again,
the previous cursor nodes are also saved for LBR stitching approach.
Some option, e.g. hide-unresolved, may hide some LBRs. Add a variable
'valid' in struct callchain_cursor_node to indicate this case. The LBR
stitching approach will only append the valid cursor nodes from previous
samples later.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-12-kan.liang@linux.intel.com
[ Use zfree() instead of open coded equivalent, and use it when freeing members of structs ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To retrieve the overwritten LBRs from previous sample for LBR stitching
approach, perf has to save the previous sample.
Only allocate the struct lbr_stitch once, when LBR stitching approach is
enabled and kernel supports hw_idx.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-11-kan.liang@linux.intel.com
[ Use zalloc()/zfree() for thread->lbr_stitch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The LBR stitch approach should be disabled by default. Because
- The stitching approach base on LBR call stack technology. The known
limitations of LBR call stack technology still apply to the approach,
e.g. Exception handing such as setjmp/longjmp will have calls/returns
not match.
- This approach is not foolproof. There can be cases where it creates
incorrect call stacks from incorrect matches. There is no attempt to
validate any matches in another way.
The 'lbr_stitch_enable' is used to indicate whether enable LBR stitch
approach, which is disabled by default. The following patch will
introduce a new option for each tools to enable the LBR stitch
approach.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-10-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Both caller and callee needs to add ip from LBR to callchain.
Factor out lbr_callchain_add_lbr_ip() to improve code readability.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-9-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Both caller and callee needs to add kernel ip to callchain. Factor out
lbr_callchain_add_kernel_ip() to improve code readability.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-8-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
LBR only collect the user call stack. To reconstruct a call stack, both
kernel call stack and user call stack are required. The function
resolve_lbr_callchain_sample() mix the kernel call stack and user call
stack.
Now, with the help of HW idx, perf tool can reconstruct a more complete
call stack by adding some user call stack from previous sample. However,
current implementation is hard to be extended to support it.
Current code path for resolve_lbr_callchain_sample()
for (j = 0; j < mix_chain_nr; j++) {
if (ORDER_CALLEE) {
if (kernel callchain)
Fill callchain info
else if (LBR callchain)
Fill callchain info
} else {
if (LBR callchain)
Fill callchain info
else if (kernel callchain)
Fill callchain info
}
add_callchain_ip();
}
With the patch,
if (ORDER_CALLEE) {
for (j = 0; j < NUM of kernel callchain) {
Fill callchain info
add_callchain_ip();
}
for (; j < mix_chain_nr) {
Fill callchain info
add_callchain_ip();
}
} else {
for (; j < NUM of LBR callchain) {
Fill callchain info
add_callchain_ip();
}
for (j = 0; j < mix_chain_nr) {
Fill callchain info
add_callchain_ip();
}
}
No functional changes.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-7-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The indent is unnecessary in resolve_lbr_callchain_sample. Removing it
will make the following patch simpler.
Current code path for resolve_lbr_callchain_sample()
/* LBR only affects the user callchain */
if (i != chain_nr) {
body of the function
....
return 1;
}
return 0;
With the patch,
/* LBR only affects the user callchain */
if (i == chain_nr)
return 0;
body of the function
...
return 1;
No functional changes.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-6-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To stitch LBR call stack, the max LBR information is required. So the
CPU PMU capabilities information has to be stored in perf header.
Add a new feature HEADER_CPU_PMU_CAPS for CPU PMU capabilities.
Retrieve all CPU PMU capabilities, not just max LBR information.
Add variable max_branches to facilitate future usage.
Committer testing:
# ls -la /sys/devices/cpu/caps/
total 0
drwxr-xr-x. 2 root root 0 Apr 17 10:53 .
drwxr-xr-x. 6 root root 0 Apr 17 07:02 ..
-r--r--r--. 1 root root 4096 Apr 17 10:53 max_precise
#
# cat /sys/devices/cpu/caps/max_precise
0
# perf record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.033 MB perf.data (7 samples) ]
#
# perf report --header-only | egrep 'cpu(desc|.*capabilities)'
# cpudesc : AMD Ryzen 5 3600X 6-Core Processor
# cpu pmu capabilities: max_precise=0
#
And then on an Intel machine:
$ ls -la /sys/devices/cpu/caps/
total 0
drwxr-xr-x. 2 root root 0 Apr 17 10:51 .
drwxr-xr-x. 6 root root 0 Apr 17 10:04 ..
-r--r--r--. 1 root root 4096 Apr 17 11:37 branches
-r--r--r--. 1 root root 4096 Apr 17 10:51 max_precise
-r--r--r--. 1 root root 4096 Apr 17 11:37 pmu_name
$ cat /sys/devices/cpu/caps/max_precise
3
$ cat /sys/devices/cpu/caps/branches
32
$ cat /sys/devices/cpu/caps/pmu_name
skylake
$ perf record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ]
$ perf report --header-only | egrep 'cpu(desc|.*capabilities)'
# cpudesc : Intel(R) Core(TM) i5-7500 CPU @ 3.40GHz
# cpu pmu capabilities: branches=32, max_precise=3, pmu_name=skylake
$
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-3-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The current rXXXX event specification creates event under PERF_TYPE_RAW
pmu type. This change allows to use rXXXX within pmu syntax, so it's
type is used via the following syntax:
-e 'cpu/r3c/'
-e 'cpum_cf/r0/'
The XXXX number goes directly to perf_event_attr::config the same way as
in '-e rXXXX' event. The perf_event_attr::type is filled with pmu type.
Committer testing:
So, lets see what goes in perf_event_attr::config for, say, the
'instructions' PERF_TYPE_HARDWARE (0) event, first we should look at how
to encode this event as a PERF_TYPE_RAW event for this specific CPU, an
AMD Ryzen 5:
# cat /sys/devices/cpu/events/instructions
event=0xc0
#
Then try with it _and_ the instruction, just to see that they are close
enough:
# perf stat -e rc0,instructions sleep 1
Performance counter stats for 'sleep 1':
919,794 rc0
919,898 instructions
1.000754579 seconds time elapsed
0.000715000 seconds user
0.000000000 seconds sys
#
Now we should try, before this patch, the PMU event encoding:
# perf stat -e cpu/rc0/ sleep 1
event syntax error: 'cpu/rc0/'
\___ unknown term
valid terms: event,edge,inv,umask,cmask,config,config1,config2,name,period,percore
#
Now with this patch, the three ways of specifying the 'instructions' CPU
counter are accepted:
# perf stat -e cpu/rc0/,rc0,instructions sleep 1
Performance counter stats for 'sleep 1':
892,948 cpu/rc0/
893,052 rc0
893,156 instructions
1.000931819 seconds time elapsed
0.000916000 seconds user
0.000000000 seconds sys
#
Requested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200416221405.437788-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This will allow parent makefiles to pass values to asciidoc.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jiwei Sun <jiwei.sun@windriver.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: yuzhoujian <yuzhoujian@didichuxing.com>
Link: http://lore.kernel.org/lkml/20200416162058.201954-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The PMU capabilities information, which is located at
/sys/bus/event_source/devices/<dev>/caps, is required by perf tool. For
example, the max LBR information is required to stitch LBR call stack.
Add perf_pmu__caps_parse() to parse the PMU capabilities information.
The information is stored in a list.
The following patch will store the capabilities information in perf
header.
Committer notes:
Here's an example of such directories and its files in an i5 7th gen
machine:
[root@seventh ~]# ls -lad /sys/bus/event_source/devices/*/caps
drwxr-xr-x. 2 root root 0 Apr 14 13:33 /sys/bus/event_source/devices/cpu/caps
drwxr-xr-x. 2 root root 0 Apr 14 13:33 /sys/bus/event_source/devices/intel_pt/caps
[root@seventh ~]# ls -la /sys/bus/event_source/devices/intel_pt/caps
total 0
drwxr-xr-x. 2 root root 0 Apr 14 13:33 .
drwxr-xr-x. 5 root root 0 Apr 14 13:12 ..
-r--r--r--. 1 root root 4096 Apr 16 13:10 cr3_filtering
-r--r--r--. 1 root root 4096 Apr 16 11:42 cycle_thresholds
-r--r--r--. 1 root root 4096 Apr 16 13:10 ip_filtering
-r--r--r--. 1 root root 4096 Apr 16 13:10 max_subleaf
-r--r--r--. 1 root root 4096 Apr 14 13:33 mtc
-r--r--r--. 1 root root 4096 Apr 14 13:33 mtc_periods
-r--r--r--. 1 root root 4096 Apr 16 13:10 num_address_ranges
-r--r--r--. 1 root root 4096 Apr 16 13:10 output_subsys
-r--r--r--. 1 root root 4096 Apr 16 13:10 payloads_lip
-r--r--r--. 1 root root 4096 Apr 16 13:10 power_event_trace
-r--r--r--. 1 root root 4096 Apr 14 13:33 psb_cyc
-r--r--r--. 1 root root 4096 Apr 14 13:33 psb_periods
-r--r--r--. 1 root root 4096 Apr 16 13:10 ptwrite
-r--r--r--. 1 root root 4096 Apr 16 13:10 single_range_output
-r--r--r--. 1 root root 4096 Apr 16 12:03 topa_multiple_entries
-r--r--r--. 1 root root 4096 Apr 16 13:10 topa_output
[root@seventh ~]# cat /sys/bus/event_source/devices/intel_pt/caps/topa_output
1
[root@seventh ~]# cat /sys/bus/event_source/devices/intel_pt/caps/topa_multiple_entries
1
[root@seventh ~]# cat /sys/bus/event_source/devices/intel_pt/caps/mtc
1
[root@seventh ~]# cat /sys/bus/event_source/devices/intel_pt/caps/power_event_trace
0
[root@seventh ~]#
[root@seventh ~]# ls -la /sys/bus/event_source/devices/cpu/caps/
total 0
drwxr-xr-x. 2 root root 0 Apr 14 13:33 .
drwxr-xr-x. 6 root root 0 Apr 14 13:12 ..
-r--r--r--. 1 root root 4096 Apr 16 13:10 branches
-r--r--r--. 1 root root 4096 Apr 14 13:33 max_precise
-r--r--r--. 1 root root 4096 Apr 16 13:10 pmu_name
[root@seventh ~]# cat /sys/bus/event_source/devices/cpu/caps/max_precise
3
[root@seventh ~]# cat /sys/bus/event_source/devices/cpu/caps/branches
32
[root@seventh ~]# cat /sys/bus/event_source/devices/cpu/caps/pmu_name
skylake
[root@seventh ~]#
Wow, first time I've heard about
/sys/bus/event_source/devices/cpu/caps/max_precise, I think I'll use it!
:-)
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-2-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
According to the API, if memory allocation wasn't possible, or some
other error occurs, asprintf will return -1, and the contents of strp
below are undefined.
int asprintf(char **strp, const char *fmt, ...);
This patch takes care of return value of asprintf to make it less error
prone and prevent the following build warning.
ignoring return value of ‘asprintf’, declared with attribute warn_unused_result [-Wunused-result]
Signed-off-by: He Zhe <zhe.he@windriver.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: hewenliang4@huawei.com
Link: http://lore.kernel.org/lkml/1582163930-233692-1-git-send-email-zhe.he@windriver.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When it is not possible for a non-privilege perf command to monitor at
the kernel level (:k), the fallback code forces a :u. That works if the
event was previously monitoring both levels. But if the event was
already constrained to kernel only, then it does not make sense to
restrict it to user only.
Given the code works by exclusion, a kernel only event would have:
attr->exclude_user = 1
The fallback code would add:
attr->exclude_kernel = 1
In the end the end would not monitor in either the user level or kernel
level. In other words, it would count nothing.
An event programmed to monitor kernel only cannot be switched to user
only without seriously warning the user.
This patch forces an error in this case to make it clear the request
cannot really be satisfied.
Behavior with paranoid 1:
$ sudo bash -c "echo 1 > /proc/sys/kernel/perf_event_paranoid"
$ perf stat -e cycles:k sleep 1
Performance counter stats for 'sleep 1':
1,520,413 cycles:k
1.002361664 seconds time elapsed
0.002480000 seconds user
0.000000000 seconds sys
Old behavior with paranoid 2:
$ sudo bash -c "echo 2 > /proc/sys/kernel/perf_event_paranoid"
$ perf stat -e cycles:k sleep 1
Performance counter stats for 'sleep 1':
0 cycles:ku
1.002358127 seconds time elapsed
0.002384000 seconds user
0.000000000 seconds sys
New behavior with paranoid 2:
$ sudo bash -c "echo 2 > /proc/sys/kernel/perf_event_paranoid"
$ perf stat -e cycles:k sleep 1
Error:
You may not have permission to collect stats.
Consider tweaking /proc/sys/kernel/perf_event_paranoid,
which controls use of the performance events system by
unprivileged users (without CAP_PERFMON or CAP_SYS_ADMIN).
The current value is 2:
-1: Allow use of (almost) all events by all users
Ignore mlock limit after perf_event_mlock_kb without CAP_IPC_LOCK
>= 0: Disallow ftrace function tracepoint by users without CAP_PERFMON or CAP_SYS_ADMIN
Disallow raw tracepoint access by users without CAP_SYS_PERFMON or CAP_SYS_ADMIN
>= 1: Disallow CPU event access by users without CAP_PERFMON or CAP_SYS_ADMIN
>= 2: Disallow kernel profiling by users without CAP_PERFMON or CAP_SYS_ADMIN
To make this setting permanent, edit /etc/sysctl.conf too, e.g.:
kernel.perf_event_paranoid = -1
v2 of this patch addresses the review feedback from jolsa@redhat.com.
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200414161550.225588-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When AUX area events are used in sampling mode, they must be the group
leader, but the group leader is also used for leader-sampling. However,
it is not desirable to use an AUX area event as the leader for
leader-sampling, because it doesn't have any samples of its own. To support
leader-sampling with AUX area events, use the 2nd event of the group as the
"leader" for the purposes of leader-sampling.
Example:
# perf record --kcore --aux-sample -e '{intel_pt//,cycles,instructions}:S' -c 10000 uname
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.786 MB perf.data ]
# perf report
Samples: 380 of events 'anon group { cycles, instructions }', Event count (approx.): 3026164
Children Self Command Shared Object Symbol
+ 38.76% 42.65% 0.00% 0.00% uname [kernel.kallsyms] [k] __x86_indirect_thunk_rax
+ 35.82% 31.33% 0.00% 0.00% uname ld-2.28.so [.] _dl_start_user
+ 34.29% 29.74% 0.55% 0.47% uname ld-2.28.so [.] _dl_start
+ 33.73% 28.62% 1.60% 0.97% uname ld-2.28.so [.] dl_main
+ 33.19% 29.04% 0.52% 0.32% uname ld-2.28.so [.] _dl_sysdep_start
+ 27.83% 33.74% 0.00% 0.00% uname [kernel.kallsyms] [k] do_syscall_64
+ 26.76% 33.29% 0.00% 0.00% uname [kernel.kallsyms] [k] entry_SYSCALL_64_after_hwframe
+ 23.78% 20.33% 5.97% 5.25% uname [kernel.kallsyms] [k] page_fault
+ 23.18% 24.60% 0.00% 0.00% uname libc-2.28.so [.] __libc_start_main
+ 22.64% 24.37% 0.00% 0.00% uname uname [.] _start
+ 21.04% 23.27% 0.00% 0.00% uname uname [.] main
+ 19.48% 18.08% 3.72% 3.64% uname ld-2.28.so [.] _dl_relocate_object
+ 19.47% 21.81% 0.00% 0.00% uname libc-2.28.so [.] setlocale
+ 19.44% 21.56% 0.52% 0.61% uname libc-2.28.so [.] _nl_find_locale
+ 17.87% 19.66% 0.00% 0.00% uname libc-2.28.so [.] _nl_load_locale_from_archive
+ 15.71% 13.73% 0.53% 0.52% uname [kernel.kallsyms] [k] do_page_fault
+ 15.18% 13.21% 1.03% 0.68% uname [kernel.kallsyms] [k] handle_mm_fault
+ 14.15% 12.53% 1.01% 1.12% uname [kernel.kallsyms] [k] __handle_mm_fault
+ 12.03% 9.67% 0.54% 0.32% uname ld-2.28.so [.] _dl_map_object
+ 10.55% 8.48% 0.00% 0.00% uname ld-2.28.so [.] openaux
+ 10.55% 20.20% 0.52% 0.61% uname libc-2.28.so [.] __run_exit_handlers
Comnmitter notes:
Fixed up this problem:
util/record.c: In function ‘perf_evlist__config’:
util/record.c:256:3: error: too few arguments to function ‘perf_evsel__config_leader_sampling’
256 | perf_evsel__config_leader_sampling(evsel);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/record.c:190:13: note: declared here
190 | static void perf_evsel__config_leader_sampling(struct evsel *evsel,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200401101613.6201-17-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
