summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2019-01-18selftests: forwarding: Add a test case for externally learned FDB entriesIdo Schimmel
Test that externally learned FDB entries can roam, but not age out. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18selftests: mlxsw: Test FDB offload indicationIdo Schimmel
Test that externally learned FDB entries added from user space are marked as offloaded. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-19Merge tag 'powerpc-5.0-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "A couple of weeks of fixes. There's one fix for an oops on Power9 machines with Open CAPI adapters. And a fix for probable memory corruption in some of the new NPU code, caught by smatch though and not seen in the wild. Plus a few other minor fixes. There's one non-fix which is the perf_regs change. That was sent during the merge window but I accidentally only merged the first of two patches in the series. It's been in linux-next so hopefully doesn't conflict with anything in acme's tree. Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Breno Leitao, Christian Lamparter, Christophe Leroy, Dan Carpenter, Frederic Barrat, Greg Kurz, Jason A. Donenfeld, Madhavan Srinivasan" * tag 'powerpc-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/syscalls: Fix syscall tracing powerpc/pseries: Fix build break due to pnv_npu2_init() powerpc/4xx/ocm: Fix fix for phys_addr_t printf warnings powerpc/powernv/npu: Fix oops in pnv_try_setup_npu_table_group() powerpc/tm: Limit TM code inside PPC_TRANSACTIONAL_MEM powerpc/8xx: fix setting of pagetable for Abatron BDI debug tool. powerpc/powernv/npu: Allocate enough memory in pnv_try_setup_npu_table_group() powerpc/perf: Update perf_regs structure to include MMCRA
2019-01-18perf python: Remove -fstack-clash-protection when building with some clang ↵Arnaldo Carvalho de Melo
versions These options are not present in some (all?) clang versions, so when we build for a distro that has a gcc new enough to have these options and that the distro python build config settings use them but clang doesn't support, b00m. This is the case with fedora rawhide (now gearing towards f30), so check if clang has the and remove the missing ones from CFLAGS. Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Thiago Macieira <thiago.macieira@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-5q50q9w458yawgxf9ez54jbp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-18perf script: Fix crash with printing mixed trace point and other eventsAndi Kleen
'perf script' crashes currently when printing mixed trace points and other events because the trace format does not handle events without trace meta data. Add a simple check to avoid that. % cat > test.c main() { printf("Hello world\n"); } ^D % gcc -g -o test test.c % sudo perf probe -x test 'test.c:3' % perf record -e '{cpu/cpu-cycles,period=10000/,probe_test:main}:S' ./test % perf script <segfault> Committer testing: Before: # perf probe -x /lib64/libc-2.28.so malloc Added new event: probe_libc:malloc (on malloc in /usr/lib64/libc-2.28.so) You can now use it in all perf tools, such as: perf record -e probe_libc:malloc -aR sleep 1 # perf probe -l probe_libc:malloc (on __libc_malloc@malloc/malloc.c in /usr/lib64/libc-2.28.so) # perf record -e '{cpu/cpu-cycles,period=10000/,probe_libc:*}:S' sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.023 MB perf.data (40 samples) ] # perf script Segmentation fault (core dumped) ^C # After: # perf script | head -6 sleep 2888 94796.944981: 16198 cpu/cpu-cycles,period=10000/: ffffffff925dc04f get_random_u32+0x1f (/lib/modules/5.0.0-rc2+/build/vmlinux) sleep 2888 [-01] 94796.944981: probe_libc:malloc: sleep 2888 94796.944983: 4713 cpu/cpu-cycles,period=10000/: ffffffff922763af change_protection+0xcf (/lib/modules/5.0.0-rc2+/build/vmlinux) sleep 2888 [-01] 94796.944983: probe_libc:malloc: sleep 2888 94796.944986: 9934 cpu/cpu-cycles,period=10000/: ffffffff922777e0 move_page_tables+0x0 (/lib/modules/5.0.0-rc2+/build/vmlinux) sleep 2888 [-01] 94796.944986: probe_libc:malloc: # Signed-off-by: Andi Kleen <ak@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20190117194834.21940-1-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-17selftests/seccomp: Abort without user notification supportKees Cook
In the face of missing user notification support, the self test needs to stop executing a test (ASSERT_*) instead of just reporting and continuing (EXPECT_*). This adjusts the user notification tests to do that where needed. Reported-by: Shuah Khan <shuah@kernel.org> Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Tested-by: Shuah Khan <shuah@kernel.org> Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-01-17selftests/bpf: retry tests that expect build-idStanislav Fomichev
While running test_progs in a loop I found out that I'm sometimes hitting "Didn't find expected build ID from the map" error. Looking at stack_map_get_build_id_offset() it seems that it is racy (by design) and can sometimes return BPF_STACK_BUILD_ID_IP (i.e. can't trylock current->mm->mmap_sem). Let's retry this test a single time. Fixes: 13790d1cc72c ("bpf: add selftest for stackmap with build_id in NMI context") Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-17perf ordered_events: Fix crash in ordered_events__freeJiri Olsa
Song Liu reported crash in 'perf record': > #0 0x0000000000500055 in ordered_events(float, long double,...)(...) () > #1 0x0000000000500196 in ordered_events.reinit () > #2 0x00000000004fe413 in perf_session.process_events () > #3 0x0000000000440431 in cmd_record () > #4 0x00000000004a439f in run_builtin () > #5 0x000000000042b3e5 in main ()" This can happen when we get out of buffers during event processing. The subsequent ordered_events__free() call assumes oe->buffer != NULL and crashes. Add a check to prevent that. Reported-by: Song Liu <liu.song.a23@gmail.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Reviewed-by: Song Liu <liu.song.a23@gmail.com> Tested-by: Song Liu <liu.song.a23@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20190117113017.12977-1-jolsa@kernel.org Fixes: d5ceb62b3654 ("perf ordered_events: Add 'struct ordered_events_buffer' layer") Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-16selftests: tc-testing: fix parsing of ife typeDavide Caratti
In iproute2 commit 90c5c969f0b9 ("fix print_0xhex on 32 bit"), the format specifier for the ife type changed from 0x%X to %#llX, causing systematic failures in the following TDC test cases: 7682 - Create valid ife encode action with mark and pass control ef47 - Create valid ife encode action with mark and pipe control df43 - Create valid ife encode action with mark and continue control e4cf - Create valid ife encode action with mark and drop control ccba - Create valid ife encode action with mark and reclassify control a1cf - Create valid ife encode action with mark and jump control cb3d - Create valid ife encode action with mark value at 32-bit maximum 95ed - Create valid ife encode action with prio and pass control aa17 - Create valid ife encode action with prio and pipe control 74c7 - Create valid ife encode action with prio and continue control 7a97 - Create valid ife encode action with prio and drop control f66b - Create valid ife encode action with prio and reclassify control 3056 - Create valid ife encode action with prio and jump control 7dd3 - Create valid ife encode action with prio value at 32-bit maximum 05bb - Create valid ife encode action with tcindex and pass control ce65 - Create valid ife encode action with tcindex and pipe control 09cd - Create valid ife encode action with tcindex and continue control 8eb5 - Create valid ife encode action with tcindex and continue control 451a - Create valid ife encode action with tcindex and drop control d76c - Create valid ife encode action with tcindex and reclassify control e731 - Create valid ife encode action with tcindex and jump control b7b8 - Create valid ife encode action with tcindex value at 16-bit maximum 2a9c - Create valid ife encode action with mac src parameter cf5c - Create valid ife encode action with mac dst parameter 2353 - Create valid ife encode action with mac src and mac dst parameters 552c - Create valid ife encode action with mark and type parameters 0421 - Create valid ife encode action with prio and type parameters 4017 - Create valid ife encode action with tcindex and type parameters fac3 - Create valid ife encode action with index at 32-bit maximnum 7c25 - Create valid ife decode action with pass control dccb - Create valid ife decode action with pipe control 7bb9 - Create valid ife decode action with continue control d9ad - Create valid ife decode action with drop control 219f - Create valid ife decode action with reclassify control 8f44 - Create valid ife decode action with jump control b330 - Create ife encode action with cookie Change 'matchPattern' values, allowing '0' and '0x0' if ife type is equal to 0, and accepting both '0x' and '0X' otherwise, to let these tests pass both with old and new tc binaries. While at it, fix a small typo in test case fac3 ('maximnum'->'maximum'). Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-16selftests: gpio-mockup-chardev: Check asprintf() for errorGeert Uytterhoeven
With gcc 7.3.0: gpio-mockup-chardev.c: In function ‘get_debugfs’: gpio-mockup-chardev.c:62:3: warning: ignoring return value of ‘asprintf’, declared with attribute warn_unused_result [-Wunused-result] asprintf(path, "%s/gpio", mnt_fs_get_target(fs)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Handle asprintf() failures to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-01-16selftests: seccomp: use LDLIBS instead of LDFLAGSFathi Boudra
seccomp_bpf fails to build due to undefined reference errors: aarch64-linaro-linux-gcc --sysroot=/build/tmp-rpb-glibc/sysroots/hikey -O2 -pipe -g -feliminate-unused-debug-types -Wl,-no-as-needed -Wall -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -lpthread seccomp_bpf.c -o /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf /tmp/ccrlR3MW.o: In function `tsync_sibling': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1920: undefined reference to `sem_post' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1920: undefined reference to `sem_post' /tmp/ccrlR3MW.o: In function `TSYNC_setup': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1863: undefined reference to `sem_init' /tmp/ccrlR3MW.o: In function `TSYNC_teardown': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1904: undefined reference to `sem_destroy' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1897: undefined reference to `pthread_kill' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1898: undefined reference to `pthread_cancel' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1899: undefined reference to `pthread_join' /tmp/ccrlR3MW.o: In function `tsync_start_sibling': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /tmp/ccrlR3MW.o: In function `TSYNC_siblings_fail_prctl': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1978: undefined reference to `sem_wait' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1990: undefined reference to `pthread_join' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1992: undefined reference to `pthread_join' /tmp/ccrlR3MW.o: In function `tsync_start_sibling': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_with_ancestor': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2016: undefined reference to `sem_wait' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2032: undefined reference to `pthread_join' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2034: undefined reference to `pthread_join' /tmp/ccrlR3MW.o: In function `tsync_start_sibling': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /tmp/ccrlR3MW.o: In function `TSYNC_two_sibling_want_nnp': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2046: undefined reference to `sem_wait' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2058: undefined reference to `pthread_join' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2060: undefined reference to `pthread_join' /tmp/ccrlR3MW.o: In function `tsync_start_sibling': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_with_no_filter': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2073: undefined reference to `sem_wait' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2098: undefined reference to `pthread_join' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2100: undefined reference to `pthread_join' /tmp/ccrlR3MW.o: In function `tsync_start_sibling': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_with_one_divergence': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2125: undefined reference to `sem_wait' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2143: undefined reference to `pthread_join' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2145: undefined reference to `pthread_join' /tmp/ccrlR3MW.o: In function `tsync_start_sibling': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' /tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_not_under_filter': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2169: undefined reference to `sem_wait' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2202: undefined reference to `pthread_join' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2227: undefined reference to `pthread_join' /tmp/ccrlR3MW.o: In function `tsync_start_sibling': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create' It's GNU Make and linker specific. The default Makefile rule looks like: $(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS) When linking is done by gcc itself, no issue, but when it needs to be passed to proper ld, only LDLIBS follows and then ld cannot know what libs to link with. More detail: https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html LDFLAGS Extra flags to give to compilers when they are supposed to invoke the linker, ‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable instead. LDLIBS Library flags or names given to compilers when they are supposed to invoke the linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS variable. https://lkml.org/lkml/2010/2/10/362 tools/perf: libraries must come after objects Link order matters, use LDLIBS instead of LDFLAGS to properly link against libpthread. Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-01-15selftests: tc-testing: fix tunnel_key failure if dst_port is unspecifiedDavide Caratti
After commit 1c25324caf82 ("net/sched: act_tunnel_key: Don't dump dst port if it wasn't set"), act_tunnel_key doesn't dump anymore the destination port, unless it was explicitly configured. This caused systematic failures in the following TDC test case: 7a88 - Add tunnel_key action with cookie parameter Avoid matching zero values of TCA_TUNNEL_KEY_ENC_DST_PORT to let the test pass again. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-15selftests: tc-testing: drop test on missing tunnel key idDavide Caratti
After merge of commit 80ef0f22ceda ("net/sched: act_tunnel_key: Allow key-less tunnels"), act_tunnel_key does not reject anymore requests to install 'set' rules where the key id is missing. Therefore, drop the following TDC testcase: ba4e - Add tunnel_key set action with missing mandatory id parameter because it's going to become a systematic fail as soon as userspace iproute2 will start supporting key-less tunnels. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-16tools/bpf: properly account for libbfd variationsStanislav Fomichev
On some platforms, in order to link against libbfd, we need to link against liberty and even possibly libz. Account for that in the bpftool Makefile. We now have proper feature detection for each case, so handle each one separately. See recent commit 14541b1e7e72 ("perf build: Don't unconditionally link the libbfd feature test to -liberty and -lz") where I fixed feature detection. v2 (addressed Jakub's nits): * better syntax for 'else ifeq' * no space between ifeq args v3: * use LIBS, not EXTLIBS for -DHAVE_LIBBFD_SUPPORT Fixes: 29a9c10e4110 ("bpftool: make libbfd optional") Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-15selftests/txtimestamp: Fix an equals vs assign bugDan Carpenter
This should be == instead of =. Fixes: b52354aa068e ("selftests: expand txtimestamp with ipv6 dgram + raw and pf_packet") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-15selftests/vm/gup_benchmark.c: match gup struct to kernelAlison Schofield
An expansion field was added to the kernel copy of this structure for future use. See mm/gup_benchmark.c. Add the same expansion field here, so that the IOCTL command decodes correctly. Otherwise, it fails with EINVAL. Signed-off-by: Alison Schofield <alison.schofield@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-01-15bpf: libbpf: retry loading program on EAGAINLorenz Bauer
Commit c3494801cd17 ("bpf: check pending signals while verifying programs") makes it possible for the BPF_PROG_LOAD to fail with EAGAIN. Retry unconditionally in this case. Fixes: c3494801cd17 ("bpf: check pending signals while verifying programs") Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-15selftests/bpf: install with_tunnels.sh for test_flow_dissector.shStanislav Fomichev
test_flow_dissector.sh depends on both with_addr.sh and with_tunnels.sh However, we install only with_addr.sh. Add with_tunnels.sh to TEST_PROGS_EXTENDED to make sure it gets installed as well. Tested with: make TARGETS=bpf install INSTALL_PATH=$PWD/x Fixes: ef4ab8447aa26 ("selftests: bpf: install script with_addr.sh") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix regression in multi-SKB responses to RTM_GETADDR, from Arthur Gautier. 2) Fix ipv6 frag parsing in openvswitch, from Yi-Hung Wei. 3) Unbounded recursion in ipv4 and ipv6 GUE tunnels, from Stefano Brivio. 4) Use after free in hns driver, from Yonglong Liu. 5) icmp6_send() needs to handle the case of NULL skb, from Eric Dumazet. 6) Missing rcu read lock in __inet6_bind() when operating on mapped addresses, from David Ahern. 7) Memory leak in tipc-nl_compat_publ_dump(), from Gustavo A. R. Silva. 8) Fix PHY vs r8169 module loading ordering issues, from Heiner Kallweit. 9) Fix bridge vlan memory leak, from Ido Schimmel. 10) Dev refcount leak in AF_PACKET, from Jason Gunthorpe. 11) Infoleak in ipv6_local_error(), flow label isn't completely initialized. From Eric Dumazet. 12) Handle mv88e6390 errata, from Andrew Lunn. 13) Making vhost/vsock CID hashing consistent, from Zha Bin. 14) Fix lack of UMH cleanup when it unexpectedly exits, from Taehee Yoo. 15) Bridge forwarding must clear skb->tstamp, from Paolo Abeni. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits) bnxt_en: Fix context memory allocation. bnxt_en: Fix ring checking logic on 57500 chips. mISDN: hfcsusb: Use struct_size() in kzalloc() net: clear skb->tstamp in bridge forwarding path net: bpfilter: disallow to remove bpfilter module while being used net: bpfilter: restart bpfilter_umh when error occurred net: bpfilter: use cleanup callback to release umh_info umh: add exit routine for UMH process isdn: i4l: isdn_tty: Fix some concurrency double-free bugs vhost/vsock: fix vhost vsock cid hashing inconsistent net: stmmac: Prevent RX starvation in stmmac_napi_poll() net: stmmac: Fix the logic of checking if RX Watchdog must be enabled net: stmmac: Check if CBS is supported before configuring net: stmmac: dwxgmac2: Only clear interrupts that are active net: stmmac: Fix PCI module removal leak tools/bpf: fix bpftool map dump with bitfields tools/bpf: test btf bitfield with >=256 struct member offset bpf: fix bpffs bitfield pretty print net: ethernet: mediatek: fix warning in phy_start_aneg tcp: change txhash on SYN-data timeout ...
2019-01-15x86/selftests/pkeys: Fork() to check for state being preservedDave Hansen
There was a bug where the per-mm pkey state was not being preserved across fork() in the child. fork() is performed in the pkey selftests, but all of the pkey activity is performed in the parent. The child does not perform any actions sensitive to pkey state. To make the test more sensitive to these kinds of bugs, add a fork() where the parent exits, and execution continues in the child. To achieve this let the key exhaustion test not terminate at the first allocation failure and fork after 2*NR_PKEYS loops and continue in the child. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: peterz@infradead.org Cc: mpe@ellerman.id.au Cc: will.deacon@arm.com Cc: luto@kernel.org Cc: jroedel@suse.de Cc: stable@vger.kernel.org Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Will Deacon <will.deacon@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Joerg Roedel <jroedel@suse.de> Link: https://lkml.kernel.org/r/20190102215657.585704B7@viggo.jf.intel.com
2019-01-14tools/testing/selftests/x86/unwind_vdso.c: Remove duplicate headerSabyasachi Gupta
Remove sys/ucontext.h which is included more than once. Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com> Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-01-14x86/mpx/selftests: fix spelling mistake "succeded" -> "succeeded"Colin Ian King
There is a spelling mistake eprintf error message, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-01-14selftests: rtc: rtctest: add alarm test on minute boundaryAlexandre Belloni
Unfortunately, some RTC don't have a second resolution for alarm so also test for alarm on a minute boundary. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-01-14selftests: rtc: rtctest: fix alarm testsAlexandre Belloni
Return values for select are not checked properly and timeouts may not be detected. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-01-12tools: iio: iio_generic_buffer: make num_loops signedMartin Kelly
Currently, num_loops is unsigned, but it's set by strtoll, which returns a (signed) long long int. This could lead to overflow, and it also makes the check "num_loops < 0" always be false, since num_loops is unsigned. Setting num_loops to -1 to loop forever is almost working because num_loops is getting set to a very high number, but it's technically still incorrect. Fix this issue by making num_loops signed. This also fixes an error found by Smatch. Signed-off-by: Martin Kelly <mkelly@xevo.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 55dda0abcf9d ("tools: iio: iio_generic_buffer: allow continuous looping") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-01-11Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling updates from Ingo Molnar: "Tooling changes only: fixes and a few stray improvements. Most of the diffstat is dominated by a PowerPC related fix of system call trace output beautification that allows us to (again) use the UAPI header version and sync up with the kernel's version of PowerPC system call names in the arch/powerpc/kernel/syscalls/syscall.tbl header" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) tools headers powerpc: Remove unistd.h perf powerpc: Rework syscall table generation perf symbols: Add 'arch_cpu_idle' to the list of kernel idle symbols tools include uapi: Sync linux/if_link.h copy with the kernel sources tools include uapi: Sync linux/vhost.h with the kernel sources tools include uapi: Sync linux/fs.h copy with the kernel sources perf beauty: Switch from using uapi/linux/fs.h to uapi/linux/mount.h tools include uapi: Grab a copy of linux/mount.h perf top: Lift restriction on using callchains without "sym" in --sort tools lib traceevent: Remove tep_data_event_from_type() API tools lib traceevent: Rename tep_is_file_bigendian() to tep_file_bigendian() tools lib traceevent: Changed return logic of tep_register_event_handler() API tools lib traceevent: Changed return logic of trace_seq_printf() and trace_seq_vprintf() APIs tools lib traceevent: Rename struct cmdline to struct tep_cmdline tools lib traceevent: Initialize host_bigendian at tep_handle allocation tools lib traceevent: Introduce new libtracevent API: tep_override_comm() perf tests: Add a test for the ARM 32-bit [vectors] page perf tools: Make find_vdso_map() more modular perf trace: Fix alignment for [continued] lines perf trace: Fix ')' placement in "interrupted" syscall lines ...
2019-01-11tools/bpf: fix bpftool map dump with bitfieldsYonghong Song
Commit 8772c8bc093b ("tools: bpftool: support pretty print with kind_flag set") added bpftool map dump with kind_flag support. When bitfield_size can be retrieved directly from btf_member, function btf_dumper_bitfield() is called to dump the bitfield. The implementation passed the wrong parameter "bit_offset" to the function. The excepted value is the bit_offset within a byte while the passed-in value is the struct member offset. This commit fixed the bug with passing correct "bit_offset" with adjusted data pointer. Fixes: 8772c8bc093b ("tools: bpftool: support pretty print with kind_flag set") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-11tools/bpf: test btf bitfield with >=256 struct member offsetYonghong Song
This patch modified test_btf pretty print test to cover the bitfield with struct member equal to or greater 256. Without the previous kernel patch fix, the modified test will fail: $ test_btf -p ...... BTF pretty print array(#1)......unexpected pprint output expected: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x1} read: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x0} BTF pretty print array(#2)......unexpected pprint output expected: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x1} read: 0: {0,0,0,0x3,0x0,0x3,{0|[0,0,0,0,0,0,0,0]},ENUM_ZERO,4,0x0} PASS:6 SKIP:0 FAIL:2 With the kernel fix, the modified test will succeed: $ test_btf -p ...... BTF pretty print array(#1)......OK BTF pretty print array(#2)......OK PASS:8 SKIP:0 FAIL:0 Fixes: 9d5f9f701b18 ("bpf: btf: fix struct/union/fwd types with kind_flag") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-10Merge tag 'riscv-for-linus-4.21-rc2-v2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V updates from Palmer Dabbelt: "This tag contains a handful of updates that slipped through the cracks during the merge window due to the holidays. The fixes are mostly independent, with the exception of one larger audit-related branch. Core RISC-V updates: - The BSS has been moved, which shrinks flat images. - A fix to test-bpf so it compiles on RV64I-based systems. - A fix to respect the kernel commandline when there is no device tree. - A fix to prevent CPUs from trying to put themselves to sleep when bringing down the system. - Support for MODULE_SECTIONS on RV32I-based systems. - [new in v2] The addition of an SBI earlycon driver. This is definately a new feature, but I'd like to include it now because I dropped this patch when submitting the merge window PR that removed our EARLY_PRINTK support. RISC-V audit updates: - The addition of NR_syscalls into unistd.h, which is necessary for CONFIG_FTRACE_SYSCALLS. - The definition of CREATE_TRACE_POINTS so __tracepoint_sys_{enter,exit} get defined. - A fix for trace_sys_exit() so we can enable HAVE_SYSCALL_TRACEPOINTS As usual, I've tested this by booting a Fedora-based image on a recent QEMU (this time just whatever I had lying around). * tag 'riscv-for-linus-4.21-rc2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: tty/serial: Add RISC-V SBI earlycon support riscv: add HAVE_SYSCALL_TRACEPOINTS to Kconfig riscv: fix trace_sys_exit hook riscv: define CREATE_TRACE_POINTS in ptrace.c riscv: define NR_syscalls in unistd.h riscv: audit: add audit hook in do_syscall_trace_enter/exit() riscv: add audit support RISC-V: Support MODULE_SECTIONS mechanism on RV32 MAINTAINERS: SiFive drivers: add myself as a SiFive driver maintainer MAINTAINERS: SiFive drivers: change the git tree to a SiFive git tree riscv: don't stop itself in smp_send_stop arch: riscv: support kernel command line forcing when no DTB passed tools uapi: fix RISC-V 64-bit support RISC-V: Make BSS section as the last section in vmlinux.lds.S
2019-01-10selftests: bpf: install files tcp_(server|client)*.pyAnders Roxell
When test_tcpbpf_user runs it complains that it can't find files tcp_server.py and tcp_client.py. Rework so that tcp_server.py and tcp_client.py gets installed, added them to the variable TEST_PROGS_EXTENDED. Fixes: d6d4f60c3a09 ("bpf: add selftest for tcpbpf") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-10selftests/bpf: add missing executables to .gitignoreStanislav Fomichev
We build test_libbpf with CXX to make sure linking against C++ works. $ make -s -C tools/lib/bpf $ git status -sb ? tools/lib/bpf/test_libbpf $ make -s -C tools/testing/selftests/bpf $ git status -sb ? tools/lib/bpf/test_libbpf ? tools/testing/selftests/bpf/test_libbpf Fixes: 8c4905b995c6 ("libbpf: make sure bpf headers are c++ include-able") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-10tools headers powerpc: Remove unistd.hRavi Bangoria
We use syscall.tbl to generate system call table on powerpc. The unistd.h copy is no longer required now. Remove it. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20190110094936.3132-2-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-10perf powerpc: Rework syscall table generationRavi Bangoria
Commit aff850393200 ("powerpc: add system call table generation support") changed how systemcall table is generated for powerpc. Incorporate these changes into perf as well. Committer testing: $ podman run --entrypoint=/bin/sh --privileged -v /home/acme/git:/git --rm -ti docker.io/acmel/linux-perf-tools-build-ubuntu:18.04-x-powerpc64 perfbuilder@d7a7af166a80:/git/perf$ head -2 /etc/os-release NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" perfbuilder@d7a7af166a80:/git/perf$ perfbuilder@d7a7af166a80:/git/perf$ make ARCH=powerpc CROSS_COMPILE=powerpc64-linux-gnu- EXTRA_CFLAGS= -C /git/linux/tools/perf O=/tmp/build/perf make: Entering directory '/git/linux/tools/perf' BUILD: Doing 'make -j8' parallel build HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep Warning: Kernel ABI header at 'tools/include/uapi/linux/mman.h' differs from latest version at 'include/uapi/linux/mman.h' diff -u tools/include/uapi/linux/mman.h include/uapi/linux/mman.h sh: 1: command: Illegal option -c Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ OFF ] ... libaudit: [ OFF ] ... libbfd: [ OFF ] ... libelf: [ on ] ... libnuma: [ OFF ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ OFF ] ... libpython: [ OFF ] ... libslang: [ OFF ] ... libcrypto: [ OFF ] ... libunwind: [ OFF ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ OFF ] ... get_cpuid: [ OFF ] ... bpf: [ on ] Makefile.config:445: No sys/sdt.h found, no SDT events are defined, please install systemtap-sdt-devel or systemtap-sdt-dev Makefile.config:491: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR Makefile.config:583: No libcrypto.h found, disables jitted code injection, please install libssl-devel or libssl-dev Makefile.config:598: slang not found, disables TUI support. Please install slang-devel, libslang-dev or libslang2-dev Makefile.config:612: GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev Makefile.config:639: Missing perl devel files. Disabling perl scripting support, please install perl-ExtUtils-Embed/libperl-dev Makefile.config:666: No python interpreter was found: disables Python support - please install python-devel/python-dev Makefile.config:721: No bfd.h/libbfd found, please install binutils-dev[el]/zlib-static/libiberty-dev to gain symbol demangling Makefile.config:750: No liblzma found, disables xz kernel module decompression, please install xz-devel/liblzma-dev Makefile.config:763: No numa.h found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev Makefile.config:814: No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-dev[el]/libbabeltrace-ctf-dev Makefile.config:840: No alternatives command found, you need to set JDIR= to point to the root of your Java directory GEN /tmp/build/perf/common-cmds.h <SNIP> CC /tmp/build/perf/util/syscalltbl.o <SNIP> LD /tmp/build/perf/libperf-in.o AR /tmp/build/perf/libperf.a LINK /tmp/build/perf/perf make: Leaving directory '/git/linux/tools/perf' perfbuilder@d7a7af166a80:/git/perf$ head /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_64.c static const char *syscalltbl_powerpc_64[] = { [0] = "restart_syscall", [1] = "exit", [2] = "fork", [3] = "read", [4] = "write", [5] = "open", [6] = "close", [7] = "waitpid", [8] = "creat", perfbuilder@d7a7af166a80:/git/perf$ tail /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_64.c [381] = "pwritev2", [382] = "kexec_file_load", [383] = "statx", [384] = "pkey_alloc", [385] = "pkey_free", [386] = "pkey_mprotect", [387] = "rseq", [388] = "io_pgetevents", }; #define SYSCALLTBL_POWERPC_64_MAX_ID 388 perfbuilder@d7a7af166a80:/git/perf$ head /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_32.c static const char *syscalltbl_powerpc_32[] = { [0] = "restart_syscall", [1] = "exit", [2] = "fork", [3] = "read", [4] = "write", [5] = "open", [6] = "close", [7] = "waitpid", [8] = "creat", perfbuilder@d7a7af166a80:/git/perf$ tail /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_32.c [381] = "pwritev2", [382] = "kexec_file_load", [383] = "statx", [384] = "pkey_alloc", [385] = "pkey_free", [386] = "pkey_mprotect", [387] = "rseq", [388] = "io_pgetevents", }; #define SYSCALLTBL_POWERPC_32_MAX_ID 388 perfbuilder@d7a7af166a80:/git/perf$ Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20190110094936.3132-1-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-09perf symbols: Add 'arch_cpu_idle' to the list of kernel idle symbolsArnaldo Carvalho de Melo
When testing 'perf top' on a armhf system (32-bit, Orange Pi Zero), I noticed that 'arch_cpu_idle' dominated, add it to the list of idle symbols, so that we can see what is that being done when not idle. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-4q2b5g4p2hrstrhp9t2mrlho@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-09tools include uapi: Sync linux/if_link.h copy with the kernel sourcesArnaldo Carvalho de Melo
To pick the changes from: a428afe82f98 ("net: bridge: add support for user-controlled bool options") a025fb5f49ad ("geneve: Allow configuration of DF behaviour") b4d3069783bc ("vxlan: Allow configuration of DF behaviour") Silencing this tools/ build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/if_link.h' differs from latest version at 'include/uapi/linux/if_link.h' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: Stefano Brivio <sbrivio@redhat.com> Link: https://lkml.kernel.org/n/tip-wq410s2wuqv5k980bidw0ju8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-09xfrm: policy: fix infinite loop when merging src-nodesFlorian Westphal
With very small change to test script we can trigger softlockup due to bogus assignment of 'p' (policy to be examined) on restart. Previously the two to-be-merged nodes had same address/prefixlength pair, so no erase/reinsert was necessary, we only had to append the list from node a to b. If prefix lengths are different, the node has to be deleted and re-inserted into the tree, with the updated prefix length. This was broken; due to bogus update to 'p' this loops forever. Add a 'restart' label and use that instead. While at it, don't perform the unneeded reinserts of the policies that are already sorted into the 'new' node. A previous patch in this series made xfrm_policy_inexact_list_reinsert() use the relative position indicator to sort policies according to age in case priorities are identical. Fixes: 6ac098b2a9d30 ("xfrm: policy: add 2nd-level saddr trees for inexact policies") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-01-09selftests: xfrm: alter htresh to trigger move of policies to hash tableFlorian Westphal
... and back to inexact tree. Repeat ping test after each htresh change: lookup results must not change. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-01-09selftests: xfrm: add block rules with adjacent/overlapping subnetsFlorian Westphal
The existing script lacks a policy pattern that triggers 'tree node merges' in the kernel. Consider adding policy affecting following subnet: pol1: dst 10.0.0.0/22 pol2: dst 10.0.0.0/23 # adds to existing 10.0.0.0/22 node -> no problems here. But now, lets consider reverse order: pol1: dst 10.0.0.0/24 pol2: dst 10.0.0.0/23 # CANNOT add to existing node When second policy gets added, the kernel must check that the new node ("10.0.0.0/23") doesn't overlap with any existing subnet. Example: dst 10.0.0.0/24 dst 10.0.0.1/24 dst 10.0.0.0/23 When the third policy gets added, the kernel must replace the nodes for the 10.0.0.0/24 and 10.0.0.1/24 policies with a single one and must merge all the subtrees/lists stored in those nodes into the new node. The existing test cases only have overlaps with a single node, so no merging takes place (we can always remove the 'old' node and replace it with the new subnet prefix). Add a few 'block policies' in a pattern that triggers this, with a priority that will make kernel prefer the 'esp' rules. Make sure the 'tunnel ping' tests still pass after they have been added. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-01-08tools/vm/page_owner: use page_owner_sort in the use exampleMiles Chen
The example in comment does not useable because the output binary is named "page_owner_sort", not "sort". Also add a reference to Documentation/vm/page_owner.rst Link: http://lkml.kernel.org/r/1546515361-8317-1-git-send-email-miles.chen@mediatek.com Signed-off-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-08selftests: forwarding: Add a test for VLAN deletionIdo Schimmel
Add a VLAN on a bridge port, delete it and make sure the PVID VLAN is not affected. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08selftests: forwarding: Fix test for different devicesIdo Schimmel
When running the test on the Spectrum ASIC the generated packets are counted on the ingress filter and injected back to the pipeline because of the 'pass' action. The router block then drops the packets due to checksum error, as the test generates packets with zero checksum. When running the test on an emulator that is not as strict about checksum errors the test fails since packets are counted twice. Once by the emulated ASIC on its ingress filter and again by the kernel as the emulator does not perform checksum validation and allows the packets to be trapped by a matching host route. Fix this by changing the action to 'drop', which will prevent the packet from continuing further in the pipeline to the router block. For veth pairs this change is essentially a NOP given packets are only processed once (by the kernel). Fixes: a0b61f3d8ebf ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08selftests: mlxsw: Add a test case for VLAN addition error flowIdo Schimmel
Add a test case for the issue fixed by previous commit. In case the offloading of an unsupported VxLAN tunnel was triggered by adding the mapped VLAN to a local port, then error should be returned to the user. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08tools include uapi: Sync linux/vhost.h with the kernel sourcesArnaldo Carvalho de Melo
To get the changes in: 4b86713236e4 ("vhost: split structs into a separate header file") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h Those didn't touch things used in tools, i.e. the following continues working: $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh static const char *vhost_virtio_ioctl_cmds[] = { [0x00] = "SET_FEATURES", [0x01] = "SET_OWNER", [0x02] = "RESET_OWNER", [0x03] = "SET_MEM_TABLE", [0x04] = "SET_LOG_BASE", [0x07] = "SET_LOG_FD", [0x10] = "SET_VRING_NUM", [0x11] = "SET_VRING_ADDR", [0x12] = "SET_VRING_BASE", [0x13] = "SET_VRING_ENDIAN", [0x14] = "GET_VRING_ENDIAN", [0x20] = "SET_VRING_KICK", [0x21] = "SET_VRING_CALL", [0x22] = "SET_VRING_ERR", [0x23] = "SET_VRING_BUSYLOOP_TIMEOUT", [0x24] = "GET_VRING_BUSYLOOP_TIMEOUT", [0x25] = "SET_BACKEND_FEATURES", [0x30] = "NET_SET_BACKEND", [0x40] = "SCSI_SET_ENDPOINT", [0x41] = "SCSI_CLEAR_ENDPOINT", [0x42] = "SCSI_GET_ABI_VERSION", [0x43] = "SCSI_SET_EVENTS_MISSED", [0x44] = "SCSI_GET_EVENTS_MISSED", [0x60] = "VSOCK_SET_GUEST_CID", [0x61] = "VSOCK_SET_RUNNING", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", [0x12] = "GET_VRING_BASE", [0x26] = "GET_BACKEND_FEATURES", }; $ At some point in the eBPFication of perf, using something like: # perf trace -e ioctl(cmd=VHOST_VRING*) Will setup a BPF filter right at the raw_syscalls:sys_enter tracepoint, i.e. filtering at the origin. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-g28usrt7l59lwq3wuh8vzbig@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08tools include uapi: Sync linux/fs.h copy with the kernel sourcesArnaldo Carvalho de Melo
To get the changes in: e262e32d6bde ("vfs: Suppress MS_* flag defs within the kernel unless explicitly enabled") That made the mount flags string table generator to switch to using mount.h instead. This silences the following perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h' diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Howells <dhowells@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-mosz81pa6iwxko4p2owbm3ss@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08perf beauty: Switch from using uapi/linux/fs.h to uapi/linux/mount.hArnaldo Carvalho de Melo
As now we'll update our fs.h copy and what tools/perf/trace/beauty/mount_flags.sh needs just got moved to mount.h, use that instead. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Howells <dhowells@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-ls19h376xukeouxrw9dswkcn@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08tools include uapi: Grab a copy of linux/mount.hArnaldo Carvalho de Melo
We were using a copy of uapi/linux/fs.h to create the mount syscall 'flags' string table to use in 'perf trace', to convert from the number obtained via the raw_syscalls:sys_enter into a string, using tools/perf/trace/beauty/mount_flags.sh, but in e262e32d6bde ("vfs: Suppress MS_* flag defs within the kernel unless explicitly enabled") those defines got moved to linux/mount.h, so grab a copy of mount.h too. Keep the uapi/linux/fs.h as we'll use it for the SEEK_ constants. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Howells <dhowells@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-i2ricmpwpdrpukfq3298jr1z@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08perf top: Lift restriction on using callchains without "sym" in --sortArnaldo Carvalho de Melo
This restriction is not present in 'perf report' and since 'perf top' uses the same hists browser, remove it from it as well. With this we create per event buckets with callchain trees, so that # perf top --sort dso -g --no-children Bucketizes samples by DSO and below it shows the callchains leading to functions in this DSO. Try also: # perf top -e sched:*switch -g --no-children To see the callchains leading to sched switches, pressing 'E' to expand all one can quickly see the most common scheduler switches and what leads to them, for instance, calls to IO, futexes, etc. Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lkml.kernel.org/r/20190107140854.GA28965@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08tools lib traceevent: Remove tep_data_event_from_type() APITzvetomir Stoyanov
In order to make libtraceevent into a proper library, its API should be straightforward. After discussion with Steven Rostedt, we decided to remove the tep_data_event_from_type() API and to replace it with tep_find_event(), as it does the same. Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181201040852.913841066@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08tools lib traceevent: Rename tep_is_file_bigendian() to tep_file_bigendian()Tzvetomir Stoyanov
In order to make libtraceevent into a proper library, its API should be straightforward. After a discussion with Steven Rostedt, we decided to rename a few APIs, to have more intuitive names. This patch renames tep_is_file_bigendian() to tep_file_bigendian(). Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181201040852.767549746@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-08tools lib traceevent: Changed return logic of tep_register_event_handler() APITzvetomir Stoyanov
In order to make libtraceevent into a proper library, its API should be straightforward. The tep_register_event_handler() functions returns -1 in case it successfully registers the new event handler. Such return code is used by the other library APIs in case of an error. To unify the return logic of tep_register_event_handler() with the other APIs, this patch introduces enum tep_reg_handler, which is used by this function as return value, to handle all possible successful return cases. Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181201040852.628034497@goodmis.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 10:22:42 +0000