summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2020-12-08selftests: mlxsw: Add Q-in-VNI veto testsAmit Cohen
Add tests to ensure that the forbidden and unsupported cases are indeed vetoed by mlxsw driver. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-08selftests: forwarding: Add Q-in-VNI testPetr Machata
Add test to check Q-in-VNI traffic. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-06selftests: mlxsw: Test RIF's reference count when joining a LAGIdo Schimmel
Test that the reference count of a router interface (RIF) configured for a LAG is incremented / decremented when ports join / leave the LAG. Use the offload indication on routes configured on the RIF to understand if it was created / destroyed. The test fails without the previous patch. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-04selftests: forwarding: Add MPLS L2VPN testGuillaume Nault
Connect hosts H1 and H2 using two intermediate encapsulation routers (LER1 and LER2). These routers encapsulate traffic from the hosts, including the original Ethernet header, into MPLS. Use ping to test reachability between H1 and H2. Signed-off-by: Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/625f5c1aafa3a8085f8d3e082d680a82e16ffbaa.1606918980.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04selftests: add selftest for the SRv6 End.DT6 (VRF) behaviorAndrea Mayer
this selftest is designed for evaluating the new SRv6 End.DT6 (VRF) behavior used, in this example, for implementing IPv6 L3 VPN use cases. Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by: Paolo Lungaroni <paolo.lungaroni@cnit.it> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04selftests: add selftest for the SRv6 End.DT4 behaviorAndrea Mayer
this selftest is designed for evaluating the new SRv6 End.DT4 behavior used, in this example, for implementing IPv4 L3 VPN use cases. Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-12-03 The main changes are: 1) Support BTF in kernel modules, from Andrii. 2) Introduce preferred busy-polling, from Björn. 3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh. 4) Memcg-based memory accounting for bpf objects, from Roman. 5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits) selftests/bpf: Fix invalid use of strncat in test_sockmap libbpf: Use memcpy instead of strncpy to please GCC selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module selftests/bpf: Add tp_btf CO-RE reloc test for modules libbpf: Support attachment of BPF tracing programs to kernel modules libbpf: Factor out low-level BPF program loading helper bpf: Allow to specify kernel module BTFs when attaching BPF programs bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF selftests/bpf: Add support for marking sub-tests as skipped selftests/bpf: Add bpf_testmod kernel module for testing libbpf: Add kernel module BTF support for CO-RE relocations libbpf: Refactor CO-RE relocs to not assume a single BTF object libbpf: Add internal helper to load BTF data by FD bpf: Keep module's btf_data_size intact after load bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address() selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP bpf: Adds support for setting window clamp samples/bpf: Fix spelling mistake "recieving" -> "receiving" bpf: Fix cold build of test_progs-no_alu32 ... ==================== Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03selftests/bpf: Fix invalid use of strncat in test_sockmapAndrii Nakryiko
strncat()'s third argument is how many bytes will be added *in addition* to already existing bytes in destination. Plus extra zero byte will be added after that. So existing use in test_sockmap has many opportunities to overflow the string and cause memory corruptions. And in this case, GCC complains for a good reason. Fixes: 16962b2404ac ("bpf: sockmap, add selftests") Fixes: 73563aa3d977 ("selftests/bpf: test_sockmap, print additional test options") Fixes: 1ade9abadfca ("bpf: test_sockmap, add options for msg_pop_data() helper") Fixes: 463bac5f1ca7 ("bpf, selftests: Add test for ktls with skb bpf ingress policy") Fixes: e9dd904708c4 ("bpf: add tls support for testing in test_sockmap") Fixes: 753fb2ee0934 ("bpf: sockmap, add msg_peek tests to test_sockmap") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201203235440.2302137-2-andrii@kernel.org
2020-12-03libbpf: Use memcpy instead of strncpy to please GCCAndrii Nakryiko
Some versions of GCC are really nit-picky about strncpy() use. Use memcpy(), as they are pretty much equivalent for the case of fixed length strings. Fixes: e459f49b4394 ("libbpf: Separate XDP program load with xsk socket creation") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201203235440.2302137-1-andrii@kernel.org
2020-12-03selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel moduleAndrii Nakryiko
Add new selftest checking attachment of fentry/fexit/fmod_ret (and raw tracepoint ones for completeness) BPF programs to kernel module function. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201203204634.1325171-15-andrii@kernel.org
2020-12-03selftests/bpf: Add tp_btf CO-RE reloc test for modulesAndrii Nakryiko
Add another CO-RE relocation test for kernel module relocations. This time for tp_btf with direct memory reads. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201203204634.1325171-14-andrii@kernel.org
2020-12-03libbpf: Support attachment of BPF tracing programs to kernel modulesAndrii Nakryiko
Teach libbpf to search for BTF types in kernel modules for tracing BPF programs. This allows attachment of raw_tp/fentry/fexit/fmod_ret/etc BPF program types to tracepoints and functions in kernel modules. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201203204634.1325171-13-andrii@kernel.org
2020-12-03libbpf: Factor out low-level BPF program loading helperAndrii Nakryiko
Refactor low-level API for BPF program loading to not rely on public API types. This allows painless extension without constant efforts to cleverly not break backwards compatibility. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201203204634.1325171-12-andrii@kernel.org
2020-12-03bpf: Allow to specify kernel module BTFs when attaching BPF programsAndrii Nakryiko
Add ability for user-space programs to specify non-vmlinux BTF when attaching BTF-powered BPF programs: raw_tp, fentry/fexit/fmod_ret, LSM, etc. For this, attach_prog_fd (now with the alias name attach_btf_obj_fd) should specify FD of a module or vmlinux BTF object. For backwards compatibility reasons, 0 denotes vmlinux BTF. Only kernel BTF (vmlinux or module) can be specified. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201203204634.1325171-11-andrii@kernel.org
2020-12-03selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTFAndrii Nakryiko
Add a self-tests validating libbpf is able to perform CO-RE relocations against the type defined in kernel module BTF. if bpf_testmod.o is not supported by the kernel (e.g., due to version mismatch), skip tests, instead of failing. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201203204634.1325171-9-andrii@kernel.org
2020-12-03selftests/bpf: Add support for marking sub-tests as skippedAndrii Nakryiko
Previously skipped sub-tests would be counted as passing with ":OK" appened in the log. Change that to be accounted as ":SKIP". Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201203204634.1325171-8-andrii@kernel.org
2020-12-03selftests/bpf: Add bpf_testmod kernel module for testingAndrii Nakryiko
Add bpf_testmod module, which is conceptually out-of-tree module and provides ways for selftests/bpf to test various kernel module-related functionality: raw tracepoint, fentry/fexit/fmod_ret, etc. This module will be auto-loaded by test_progs test runner and expected by some of selftests to be present and loaded. Pahole currently isn't able to generate BTF for static functions in kernel modules, so make sure traced function is global. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20201203204634.1325171-7-andrii@kernel.org
2020-12-03libbpf: Add kernel module BTF support for CO-RE relocationsAndrii Nakryiko
Teach libbpf to search for candidate types for CO-RE relocations across kernel modules BTFs, in addition to vmlinux BTF. If at least one candidate type is found in vmlinux BTF, kernel module BTFs are not iterated. If vmlinux BTF has no matching candidates, then find all kernel module BTFs and search for all matching candidates across all of them. Kernel's support for module BTFs are inferred from the support for BTF name pointer in BPF UAPI. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201203204634.1325171-6-andrii@kernel.org
2020-12-03libbpf: Refactor CO-RE relocs to not assume a single BTF objectAndrii Nakryiko
Refactor CO-RE relocation candidate search to not expect a single BTF, rather return all candidate types with their corresponding BTF objects. This will allow to extend CO-RE relocations to accommodate kernel module BTFs. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20201203204634.1325171-5-andrii@kernel.org
2020-12-03libbpf: Add internal helper to load BTF data by FDAndrii Nakryiko
Add a btf_get_from_fd() helper, which constructs struct btf from in-kernel BTF data by FD. This is used for loading module BTFs. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201203204634.1325171-4-andrii@kernel.org
2020-12-03selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMPPrankur gupta
Adding selftests for new added functionality to set TCP_WINDOW_CLAMP from bpf setsockopt. Signed-off-by: Prankur gupta <prankgup@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201202213152.435886-3-prankgup@fb.com
2020-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: drivers/net/ethernet/ibm/ibmvnic.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03Merge tag 'net-5.10-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.10-rc7, including fixes from bpf, netfilter, wireless drivers, wireless mesh and can. Current release - regressions: - mt76: usb: fix crash on device removal Current release - always broken: - xsk: Fix umem cleanup from wrong context in socket destruct Previous release - regressions: - net: ip6_gre: set dev->hard_header_len when using header_ops - ipv4: Fix TOS mask in inet_rtm_getroute() - net, xsk: Avoid taking multiple skbuff references Previous release - always broken: - net/x25: prevent a couple of overflows - netfilter: ipset: prevent uninit-value in hash_ip6_add - geneve: pull IP header before ECN decapsulation - mpls: ensure LSE is pullable in TC and openvswitch paths - vxlan: respect needed_headroom of lower device - batman-adv: Consider fragmentation for needed packet headroom - can: drivers: don't count arbitration loss as an error - netfilter: bridge: reset skb->pkt_type after POST_ROUTING traversal - inet_ecn: Fix endianness of checksum update when setting ECT(1) - ibmvnic: fix various corner cases around reset handling - net/mlx5: fix rejecting unsupported Connect-X6DX SW steering - net/mlx5: Enforce HW TX csum offload with kTLS" * tag 'net-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits) net/mlx5: DR, Proper handling of unsupported Connect-X6DX SW steering net/mlx5e: kTLS, Enforce HW TX csum offload with kTLS net: mlx5e: fix fs_tcp.c build when IPV6 is not enabled net/mlx5: Fix wrong address reclaim when command interface is down net/sched: act_mpls: ensure LSE is pullable before reading it net: openvswitch: ensure LSE is pullable before reading it net: skbuff: ensure LSE is pullable before decrementing the MPLS ttl net: mvpp2: Fix error return code in mvpp2_open() chelsio/chtls: fix a double free in chtls_setkey() rtw88: debug: Fix uninitialized memory in debugfs code vxlan: fix error return code in __vxlan_dev_create() net: pasemi: fix error return code in pasemi_mac_open() cxgb3: fix error return code in t3_sge_alloc_qset() net/x25: prevent a couple of overflows dpaa_eth: copy timestamp fields to new skb in A-050385 workaround net: ip6_gre: set dev->hard_header_len when using header_ops mt76: usb: fix crash on device removal iwlwifi: pcie: add some missing entries for AX210 iwlwifi: pcie: invert values of NO_160 device config entries iwlwifi: pcie: add one missing entry for AX210 ...
2020-12-03bpf: Fix cold build of test_progs-no_alu32Brendan Jackman
This object lives inside the trunner output dir, i.e. tools/testing/selftests/bpf/no_alu32/btf_data.o At some point it gets copied into the parent directory during another part of the build, but that doesn't happen when building test_progs-no_alu32 from clean. Signed-off-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/bpf/20201203120850.859170-1-jackmanb@google.com
2020-12-03libbpf: Cap retries in sys_bpf_prog_loadStanislav Fomichev
I've seen a situation, where a process that's under pprof constantly generates SIGPROF which prevents program loading indefinitely. The right thing to do probably is to disable signals in the upper layers while loading, but it still would be nice to get some error from libbpf instead of an endless loop. Let's add some small retry limit to the program loading: try loading the program 5 (arbitrary) times and give up. v2: * 10 -> 5 retires (Andrii Nakryiko) Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201202231332.3923644-1-sdf@google.com
2020-12-03libbpf: Sanitise map names before pinningToke Høiland-Jørgensen
When we added sanitising of map names before loading programs to libbpf, we still allowed periods in the name. While the kernel will accept these for the map names themselves, they are not allowed in file names when pinning maps. This means that bpf_object__pin_maps() will fail if called on an object that contains internal maps (such as sections .rodata). Fix this by replacing periods with underscores when constructing map pin paths. This only affects the paths generated by libbpf when bpf_object__pin_maps() is called with a path argument. Any pin paths set by bpf_map__set_pin_path() are unaffected, and it will still be up to the caller to avoid invalid characters in those. Fixes: 113e6b7e15e2 ("libbpf: Sanitise internal map names so they are not rejected by the kernel") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201203093306.107676-1-toke@redhat.com
2020-12-03libbpf: Fail early when loading programs with unspecified typeAndrei Matei
Before this patch, a program with unspecified type (BPF_PROG_TYPE_UNSPEC) would be passed to the BPF syscall, only to have the kernel reject it with an opaque invalid argument error. This patch makes libbpf reject such programs with a nicer error message - in particular libbpf now tries to diagnose bad ELF section names at both open time and load time. Signed-off-by: Andrei Matei <andreimatei1@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201203043410.59699-1-andreimatei1@gmail.com
2020-12-03selftests/bpf: Indent ima_setup.sh with tabs.KP Singh
The file was formatted with spaces instead of tabs and went unnoticed as checkpatch.pl did not complain (probably because this is a shell script). Re-indent it with tabs to be consistent with other scripts. Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201203191437.666737-5-kpsingh@chromium.org
2020-12-03selftests/bpf: Add config dependency on BLK_DEV_LOOPKP Singh
The ima selftest restricts its scope to a test filesystem image mounted on a loop device and prevents permanent ima policy changes for the whole system. Fixes: 34b82d3ac105 ("bpf: Add a selftest for bpf_ima_inode_hash") Reported-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201203191437.666737-4-kpsingh@chromium.org
2020-12-03selftests/bpf: Ensure securityfs mount before writing ima policyKP Singh
SecurityFS may not be mounted even if it is enabled in the kernel config. So, check if the mount exists in /proc/mounts by parsing the file and, if not, mount it on /sys/kernel/security. Fixes: 34b82d3ac105 ("bpf: Add a selftest for bpf_ima_inode_hash") Reported-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201203191437.666737-3-kpsingh@chromium.org
2020-12-03selftests/bpf: Update ima_setup.sh for busyboxKP Singh
losetup on busybox does not output the name of loop device on using -f with --show. It also doesn't support -j to find the loop devices for a given backing file. losetup is updated to use "-a" which is available on busybox. blkid does not support options (-s and -o) to only display the uuid, so parse the output instead. Not all environments have mkfs.ext4, the test requires a loop device with a backing image file which could formatted with any filesystem. Update to using mkfs.ext2 which is available on busybox. Fixes: 34b82d3ac105 ("bpf: Add a selftest for bpf_ima_inode_hash") Reported-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201203191437.666737-2-kpsingh@chromium.org
2020-12-03libbpf: Separate XDP program load with xsk socket creationMariusz Dudek
Add support for separation of eBPF program load and xsk socket creation. This is needed for use-case when you want to privide as little privileges as possible to the data plane application that will handle xsk socket creation and incoming traffic. With this patch the data entity container can be run with only CAP_NET_RAW capability to fulfill its purpose of creating xsk socket and handling packages. In case your umem is larger or equal process limit for MEMLOCK you need either increase the limit or CAP_IPC_LOCK capability. To resolve privileges issue two APIs are introduced: - xsk_setup_xdp_prog - loads the built in XDP program. It can also return xsks_map_fd which is needed by unprivileged process to update xsks_map with AF_XDP socket "fd" - xsk_socket__update_xskmap - inserts an AF_XDP socket into an xskmap for a particular xsk_socket Signed-off-by: Mariusz Dudek <mariuszx.dudek@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20201203090546.11976-2-mariuszx.dudek@intel.com
2020-12-03tools/resolve_btfids: Fix some error messagesBrendan Jackman
Add missing newlines and fix polarity of strerror argument. Signed-off-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/bpf/20201203102234.648540-1-jackmanb@google.com
2020-12-03selftests/bpf: Copy file using read/write in local storage testStanislav Fomichev
Splice (copy_file_range) doesn't work on all filesystems. I'm running test kernels on top of my read-only disk image and it uses plan9 under the hood. This prevents test_local_storage from successfully passing. There is really no technical reason to use splice, so lets do old-school read/write to copy file; this should work in all environments. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201202174947.3621989-1-sdf@google.com
2020-12-03tools/bpftool: Auto-detect split BTFs in common casesAndrii Nakryiko
In case of working with module's split BTF from /sys/kernel/btf/*, auto-substitute /sys/kernel/btf/vmlinux as the base BTF. This makes using bpftool with module BTFs faster and simpler. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201202065244.530571-4-andrii@kernel.org
2020-12-03libbpf: Add base BTF accessorAndrii Nakryiko
Add ability to get base BTF. It can be also used to check if BTF is split BTF. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201202065244.530571-3-andrii@kernel.org
2020-12-03tools/bpftool: Emit name <anon> for anonymous BTFsAndrii Nakryiko
For consistency of output, emit "name <anon>" for BTFs without the name. This keeps output more consistent and obvious. Suggested-by: Song Liu <songliubraving@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201202065244.530571-2-andrii@kernel.org
2020-12-03macvlan: Support for high multicast packet rateThomas Karlsson
Background: Broadcast and multicast packages are enqueued for later processing. This queue was previously hardcoded to 1000. This proved insufficient for handling very high packet rates. This resulted in packet drops for multicast. While at the same time unicast worked fine. The change: This patch make the queue length adjustable to accommodate for environments with very high multicast packet rate. But still keeps the default value of 1000 unless specified. The queue length is specified as a request per macvlan using the IFLA_MACVLAN_BC_QUEUE_LEN parameter. The actual used queue length will then be the maximum of any macvlan connected to the same port. The actual used queue length for the port can be retrieved (read only) by the IFLA_MACVLAN_BC_QUEUE_LEN_USED parameter for verification. This will be followed up by a patch to iproute2 in order to adjust the parameter from userspace. Signed-off-by: Thomas Karlsson <thomas.karlsson@paneda.se> Link: https://lore.kernel.org/r/dd4673b2-7eab-edda-6815-85c67ce87f63@paneda.se Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-02bpf: Eliminate rlimit-based memory accounting infra for bpf mapsRoman Gushchin
Remove rlimit-based accounting infrastructure code, which is not used anymore. To provide a backward compatibility, use an approximation of the bpf map memory footprint as a "memlock" value, available to a user via map info. The approximation is based on the maximal number of elements and key and value sizes. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20201201215900.3569844-33-guro@fb.com
2020-12-02selftests/bpf: Extend bind{4,6} programs with a call to bpf_setsockoptStanislav Fomichev
To make sure it doesn't trigger sock_owned_by_me splat. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201202172516.3483656-4-sdf@google.com
2020-12-02selftests/bpf: Rewrite test_sock_addr bind bpf into CStanislav Fomichev
I'm planning to extend it in the next patches. It's much easier to work with C than BPF assembly. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201202172516.3483656-2-sdf@google.com
2020-12-02Merge tag 'trace-v5.10-rc6-bootconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull bootconfig fixes from Steven Rostedt: "Have bootconfig size and checksum be little endian In case the bootconfig is created on one kind of endian machine, and then read on the other kind of endian kernel, the size and checksum will be incorrect. Instead, have both the size and checksum always be little endian and have the tool and the kernel convert it from little endian to or from the host endian" * tag 'trace-v5.10-rc6-bootconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: docs: bootconfig: Add the endianness of fields tools/bootconfig: Store size and checksum in footer as le32 bootconfig: Load size and checksum in the footer as le32
2020-12-01Merge tag 'trace-v5.10-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Use correct timestamp variable for ring buffer write stamp update - Fix up before stamp and write stamp when crossing ring buffer sub buffers - Keep a zero delta in ring buffer in slow path if cmpxchg fails - Fix trace_printk static buffer for archs that care - Fix ftrace record accounting for ftrace ops with trampolines - Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency - Remove WARN_ON in hwlat tracer that triggers on something that is OK - Make "my_tramp" trampoline in ftrace direct sample code global - Fixes in the bootconfig tool for better alignment management * tag 'trace-v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ring-buffer: Always check to put back before stamp when crossing pages ftrace: Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency ftrace: Fix updating FTRACE_FL_TRAMP tracing: Fix alignment of static buffer tracing: Remove WARN_ON in start_thread() samples/ftrace: Mark my_tramp[12]? global ring-buffer: Set the right timestamp in the slow path of __rb_reserve_next() ring-buffer: Update write stamp with the correct ts docs: bootconfig: Update file format on initrd image tools/bootconfig: Align the bootconfig applied initrd image size to 4 tools/bootconfig: Fix to check the write failure correctly tools/bootconfig: Fix errno reference after printf()
2020-12-01selftests: forwarding: Add QinQ veto testingDanielle Ratson
Test that each veto that was added in the previous patch, is indeed vetoed. $ ./q_in_q_veto.sh TEST: create 802.1ad vlan upper on top of a front panel [ OK ] TEST: create 802.1ad vlan upper on top of a bridge port [ OK ] TEST: create 802.1ad vlan upper on top of a lag [ OK ] TEST: create 802.1ad vlan upper on top 802.1q bridge [ OK ] TEST: create 802.1ad vlan upper on top 802.1ad bridge [ OK ] TEST: create 802.1q vlan upper on top 802.1ad bridge [ OK ] TEST: create vlan upper on top of front panel enslaved to 802.1ad bridge [ OK ] TEST: create vlan upper on top of lag enslaved to 802.1ad bridge [ OK ] TEST: enslave front panel with vlan upper to 802.1ad bridge [ OK ] TEST: enslave lag with vlan upper to 802.1ad bridge [ OK ] TEST: IP address addition to 802.1ad bridge [ OK ] TEST: switch bridge protocol [ OK ] Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30tools/bootconfig: Store size and checksum in footer as le32Masami Hiramatsu
Store the size and the checksum fields in the footer as le32 instead of u32. This will allow us to apply bootconfig to the cross build initrd without caring the endianness. Link: https://lkml.kernel.org/r/160583935332.547349.5897811300636587426.stgit@devnote2 Reported-by: Steven Rostedt <rostedt@goodmis.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-30selftests/bpf: Fix flavored variants of test_imaKP Singh
Flavored variants of test_progs (e.g. test_progs-no_alu32) change their working directory to the corresponding subdirectory (e.g. no_alu32). Since the setup script required by test_ima (ima_setup.sh) is not mentioned in the dependencies, it does not get copied to these subdirectories and causes flavored variants of test_ima to fail. Adding the script to TRUNNER_EXTRA_FILES ensures that the file is also copied to the subdirectories for the flavored variants of test_progs. Fixes: 34b82d3ac105 ("bpf: Add a selftest for bpf_ima_inode_hash") Reported-by: Yonghong Song <yhs@fb.com> Suggested-by: Yonghong Song <yhs@fb.com> Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20201126184946.1708213-1-kpsingh@chromium.org
2020-11-28selftests: tc-testing: enable CONFIG_NET_SCH_RED as a moduleDavide Caratti
a proper kernel configuration for running kselftest can be obtained with: $ yes | make kselftest-merge enable compile support for the 'red' qdisc: otherwise, tdc kselftest fail when trying to run tdc test items contained in red.json. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Link: https://lore.kernel.org/r/cfa23f2d4f672401e6cebca3a321dd1901a9ff07.1606416464.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-28Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski
Daniel Borkmann says: ==================== pull-request: bpf 2020-11-28 1) Do not reference the skb for xsk's generic TX side since when looped back into RX it might crash in generic XDP, from Björn Töpel. 2) Fix umem cleanup on a partially set up xsk socket when being destroyed, from Magnus Karlsson. 3) Fix an incorrect netdev reference count when failing xsk_bind() operation, from Marek Majtyka. 4) Fix bpftool to set an error code on failed calloc() in build_btf_type_table(), from Zhen Lei. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Add MAINTAINERS entry for BPF LSM bpftool: Fix error return value in build_btf_type_table net, xsk: Avoid taking multiple skbuff references xsk: Fix incorrect netdev reference count xsk: Fix umem cleanup bug at socket destruct MAINTAINERS: Update XDP and AF_XDP entries ==================== Link: https://lore.kernel.org/r/20201128005104.1205-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Trivial conflict in CAN, keep the net-next + the byteswap wrapper. Conflicts: drivers/net/can/usb/gs_usb.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27selftests/tls: add CHACHA20-POLY1305 to tls selftestsVadim Fedorenko
Add new cipher as a variant of standard tls selftests Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 14:54:00 +0000